1050 modeli
I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…
A small nut driver with which you can also screw in hard-to-reach places. This nut driver also has a through-hole so that the protruding part of the screw does not interfere but simply passes through the nut driver. Width across flats for…
Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Sicherungszieher für Fahrzeugsicherungen / MINI 997 Blade Fuses / Automotive Fuses Praktischer Helfer beim Sicherungsziehen bzw. setzen Konturen → 2 Decke → 5 Boden → 5 Erste Schicht → 0,2mm Variable Schichthöhe Stützen → Überall Infill →…
Bobble the head of your favorite friendly little Autobot pal! This model includes a remix, with permission, of the head from the Toymakr3d G1 Transformers Bumblebee. If you like Bumblebee, that print is a lot of fun to print and build, so…
Bobble the head of your favorite Autobot Leader! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of my son's model for a…
Fallout4 stand for all 20 bobbleheads. Designed especially for the Prusa MINI+ 3D printer (or for another such small printer). “Podstavec - standardni” … can be used for any version of the figures “Podstavec - alternativni” … is intended…
Bobble the head of your favorite Autobot Warrior! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of the head from the…
Genghis Khan Funk@ P@p Bobblehead. zero post op. NICE.
Bobble the head of your favorite Autobot Warrior! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of the head from the…
Bobble the head of your favorite Autobot Spy! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of the head from the…
Copy these files to a spare SD card, and use to make life easier when changing filament or just preparing the printer for a print. Eject filament will heat the nozzle, and run the extruder motor backwards until filament is out. Load…
This is a bracket for mounting E27 lamp holders (40mm diameter) behind televisions or monitors with VESA 200 mounts (max. M6 screws). The angle can be adjusted in 30° steps. To do this, simply insert some 1.75 mm filament into the two…
EN: The HAZET 810R bit or Inbus Flow 73424 bit ratched screwdrivers are some of the best screwdrivers with a silent and stepless ratchet. Nevertheless, I almost didn't buy the HAZET 810R because it doesn't have the very practical twirler…
Keine speziellen Drucktips – siehe G-Code.
Beschreibung Das Modell der ehemaligen katholischen Kirche „Zum kostbaren Blut“ (Rheinstraße 8, 35684 Dillenburg – Frohnhausen) ist das fünfte einer Reihe von Modellen profanierter, umgebauter, umgewidmeter oder abgerissener Kirchen der…
Děti/žáci/studenti se budou vracet ke svým tradicím. Naučí se základní techniku vyšívání křížkovým stehem.
Funk@ P@p Jesus made with LumaAI. UV displacment in Blender Fixed and prepared in MS3dbuilder. Sliced in Prusaslicer.
Customizable 3D printable springs for bobbleheads and similar designs. https://youtu.be/y7rcWTLWsCM https://youtu.be/3HwXJQMGgsQ How do I customize this? This is an OpenSCAD project. OpenSCAD is a script-based modeling software…
Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed Scale it as you like :) pug original model: https://www.printables.com/model/266115-pack-pug
Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Jack-o'-lantern bobblehead for your printer. Just add G-Code and enjoy the bobble! https://youtu.be/5cWb99a7tlI https://youtu.be/y7rcWTLWsCM https://youtu.be/3HwXJQMGgsQ Printing Pumpkin heads may require supports (around the exterior…
Emoji themed bobbleheads for your printer. Just add G-Code and enjoy the bobble! https://youtu.be/3HwXJQMGgsQ https://youtu.be/y7rcWTLWsCM https://youtu.be/5cWb99a7tlI Printing Base and spring can be printed without supports. Emoji heads…
Berserk: Behelit Griffith's Egg of the King. From the best-selling manga Berserk, by Kentaro Miura. I remixed this model from robopillow on Thingiverse to be easier to 3D print. I recreated the top cap piece to be more durable. Printing:…
When I bought my 3D printer, I knew I wanted to print a Vault Boy bobblehead, but I couldn't find a model that looked exactly the way I wanted with the classic Vault Boy thumbs up pose. After some searching I ended up finding this nearly…
Ghost bobblehead for your printer. Just add G-Code and enjoy the bobble! https://youtu.be/5cWb99a7tlI https://youtu.be/y7rcWTLWsCM https://youtu.be/3HwXJQMGgsQ Printing Base, head, and spring can be printed without supports. Ideal line…
Christmas Nativity Decoration
моделька с отдельной головой и местом под пружинку от шариковой ручки
This is a bobble-head Gnome toy. This toy uses a 3D printed spring and base. Supports are required only for the Gnome body and you can use minimal infill for all parts (10% is fine). This was made from a couple of different things. First…
Ich musste meine losen Sechskantschraubenbits organisieren. Deshalb entwickelte ich eine Box zum Sortieren von allen Schrauberbits. Diese Schraubendreher-Bit-Box kann im Deckel 100 kurze Bits aufnehmen. Im hinteren Bereich nochmals 40…
Introducing the Behemoth from Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 80mm base. It is intended to be printed in one piece with the base separate. All credit for character design goes to…
Bobble the head of your favorite leader of the heroic Autobots! I wasn't able to find the source for the head model I used for this bobblehead. I found similar ones, but not this exact one. If you find it, please let me know. All I did…
Detailed pike head wallmount decoration
Skull bobblehead for your printer. Just add G-Code and enjoy the bobble! https://youtu.be/5cWb99a7tlI https://youtu.be/y7rcWTLWsCM https://youtu.be/3HwXJQMGgsQ Printing Base, head, and spring can be printed without supports. The skull is…
This is an old and unfinished project, still salvageable for enthusiasts, but not easy or simple to make. It will require some creativity, tinkering and touching up, so read before you proceed ! On the model I was pretty impressed with…
Welcome to Stonehenge! This model was created by Artemio García , available also in MMU version. Stonehenge is a prehistoric monument in Wiltshire, England . It consists of a ring of standing stones, with each standing stone around 13…
Minnie Bobblehead using 3DPrinty's spring and base. Files for spring and base can be found here: https://www.printables.com/model/224836-emoji-printer-bobbleheads Print Settings Support used for ears and mouth. I used a 0.16mm layer…
Using 3D Printy's fully printable bobblehead design and DatBuschi's stormtrooper helmet towing hook cover to make the stormtrooper helmet into a bobblehead. I printed mine using Aguila098's bobblehead extended base. Video:…
Ma che dici? I've wanted to make one of these since the first time I saw the incredibly smart bobbleheads by 3D Printy . This contest was the motivation I needed. The hand comes from this model I've found on Thingiverse. The original 3D…
Nativity: Star of Bethlehem
At Necro Punks Miniatures, we specialize in crafting highly detailed, attitude-packed miniatures and immersive 3D-printable scenarios designed for your tabletop adventures. Exciting News! We're thrilled to launch our store, and to…
A miniature interpretation of Stonehenge, reduced to its essential form while preserving its iconic circular arrangement and mysterious presence. Part of the Tiny Landmarks collection, this piece translates one of the most enigmatic…
Got an idea to design Joycon holders, this is one of the designs I came up with. The fit of the joycons are fine tuned to my crude (but upgraded) machine, Anet A8. The .STL should work ok for most printers tho. If you like my designs,…
See 3D Printy's Printer Bobbleheads for additional parts and more information. The head is used from JS-studio's incredible sculpt .
Requires supports. I consider this a work-in-progress, I have not printed it myself yet. I may make a 2-part version that is easier to print. #1319971112300 This person is illegally selling this on Etsy even though my design does not…
hermosa decoracion para nuestra pared, en alta resolucion se puede fabricar en varios tamaños
Buddha sculpted in Blender originally from a scan. There was a lot of hours worked into it.
The glasses are perfect for celebrating 2026, bobbleheaands style. One way to make the glasses more original is to set zero lower layers and zero upper layers, so the filling remains visible and everyone can customize the circle as they…
R2D2 bobblehead for your printer. Just add G-Code and enjoy the bobble! https://youtu.be/3HwXJQMGgsQ https://youtu.be/y7rcWTLWsCM https://youtu.be/5cWb99a7tlI Printing Base, head, and spring can be printed without supports. Ideal line…
I could not find a Bethlehem star model for hanging on the back of a sleigh. So, I designed this star in SolidWorks and have included the .step and SolidWorks files for remixing. There are ender 3 sized parts which print in 3 sections.…
Low-Poly Darth Vader bobblehead for your printer. Just add G-Code and enjoy the bobble! https://youtu.be/y7rcWTLWsCM https://youtu.be/3HwXJQMGgsQ https://youtu.be/5cWb99a7tlI Printing Base, head, and spring can be printed without…
Sorry about the large size, but if you scale down the model to 2,5 %, it will fit perfectly.
Bobblehead from a scan of a classic TMNT figure for use with 3D Printy's bobble head spring and base Files for spring and base can be found here: https://www.printables.com/model/224836-emoji-printer-bobbleheads Print Settings I used…
This is a printable working model of the iconic Harley Davidson Knucklehead engine. This is the engine that changed american automotive history. The original was 61 CI and my model is approximately 60%, so it is around 600cc. Started with…
Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Coffin bobblehead for your printer. Just add G-Code and enjoy the bobble! https://youtu.be/5cWb99a7tlI https://youtu.be/y7rcWTLWsCM https://youtu.be/3HwXJQMGgsQ Printing Base, coffin, and spring can be printed without supports. Ideal line…
This popular bridge head design works great when printed in ABS-like resin. I've been using one for our twice weekly games for over a year now. Loving it.
Bat bobblehead for your printer. Just add G-Code and enjoy the bobble! https://youtu.be/5cWb99a7tlI https://youtu.be/y7rcWTLWsCM https://youtu.be/3HwXJQMGgsQ Printing Base, head, and spring can be printed without supports. Ideal line…
Edit: updated description This mod was made as fanart but can also work for Object Head characters. PLEASE read the description both for this mod and for Dummy13 before printing! On first try it's not easy to print and not easy to…
This is a bobble-head Skull toy with action bobbling brain. This toy use a 3D printed spring that supports the brain and makes it bobble. No supports are required and you can use minimal infill (10% is fine). The brain bobbles best if you…
A simple remix of Juansejo's smiling Owl model.
Cute bust of the war god bobblehead PRINTING INSTRUCTIONS: MATERIAL : PLA NOZZLE SIZE : 0.4 mm LAYER HEIGHT: 0.2 mm VERTICAL SHELLS: 2 INFILL: 10% SUPPORT: YES it should be printed with supports (35 in supports settings is enought) I…
Schraubendreher Tischhalterung passend für eine Wera Big Box.
Einkaufswagenchip zum herausziehen, auf Wunsch mit oder ohne bestimmten Namen
I wanted some Christmas-themed studs for @MagnumDanger's giant LEGO holiday wreath, and loved this Star of Bethlehem. Printed with supports. Thank you @DarkHavoc for the original star model. Wreath can be found here:…
Hello, i always have trouble to create nice silicone joints and startet to look for some handy tools. I saw some good tools in wood, but they were very expensive (4€ each size). Good we have 3D printers, so i designed some and tested…
This a weighted poker card capper. It is placed on your hole cards during a hand to make sure they are not accidentally folded. The base is designed with the same diameter (39mm) as a standard size poker chip so this will stack perfectly…
Helmet holder for wall mounting with one screw. Very easy and quick to print Helmhalter für die Wandmontage mit einer Schraube. Sehr leicht und schnell zu drucken Ich habe PETG genommen Kann natürlich auch für andere Zwecke verwendet…
Customizable bases for fully 3D printed bobbleheads. https://youtu.be/3HwXJQMGgsQ https://youtu.be/y7rcWTLWsCM https://youtu.be/5cWb99a7tlI How do I customize this? This is an OpenSCAD project. OpenSCAD is a script-based modeling software…
Perfect little lure to get some big fish! Use a 4/0 hook and you will be good to go for some big boys.
PRINTING INSTRUCTIONS: MATERIAL : PLA NOZZLE SIZE : 0.4 mm LAYER HEIGHT: 0.2 mm VERTICAL SHELLS: 2 INFILL: 10% SUPPORT: YES it should be printed with supports (35 in supports settings is enought)
Ich habe ein Ersatzteil zum abziehen der Schraubenkappen vom Radbolzen entworfen. Evtl. kann es ja jemand gebrauchen.
Pumpkin bobblehead for your printer. Just add G-Code and enjoy the bobble! https://youtu.be/5cWb99a7tlI https://youtu.be/y7rcWTLWsCM https://youtu.be/3HwXJQMGgsQ Printing Base, top, and spring can be printed without supports. Ideal line…
This is a remix of 3D Printy's Emoji Printer Bobbleheads to allow the fitting of my racing driver and other figure heads (which I've also included in this model). Due to the additional weight I find it best to use the “Stiff” spring from…
As a gift for a friend, I have turned the Happy Ghosty The Ghost, by Nejc Sever into a bobblehead, using the excellent model by 3D Printy as a base. And since Halloween is coming, why not share the remix with the community?! If you want…
http://www.modellbau-wiki.de/wiki/Behelfspersonenwagen A MDyg 986 in gauge 1 (1:32) will be ~700 mm long. Luckily the Deutsche Bundesbahn MDyg986 "Behelfgepackwagen" is very symmetrical. I "only" needed to design a quarter of this express…
Behemoth from Final Fantasy XV XPS port by Xelandis https://www.deviantart.com/xelandis uploaded on 02/02/2022 I know this will be commercialized in China, happy Chinese New Year. Category: Creatures
Includes AMS and non-AMS versions Here’s my Berserk-inspired Behelit keychain , a pocket-sized version of the infamous Egg of the King. I designed it to be lightweight but durable, with a small loop at the top so you can attach it to a…
Squid Game Bobblehead by erwoong on thingiverse. ----------------------------------------------------------------------- as described on thingiverse: These are three Bobbleheads by the Netflix series “Squid Game” assembly is required, and…
Lego Bobblehead. Don't forget to leave a picture of your Lego bobblehead print. Thanks.
here we have 2 versions Fullhat is a complete model that you print with color change over layers or print in one color and paint later or leave it as is version 2 consists of 3 parts that you can print in different colors and then put…
Bobbleheands style Halloween hairband decorated with two pumpkins. A perfect accessory to add to your Halloween costume. There is the standard file and one to be printed in two colors using the colorchange command. One way to make the…
Bobble the head of your favorite treacherous Air Commander of the evil Decepticons! Get the rest of the needed parts (spring and base) from the linked original Bobblehead models, or use my 3MF file, or print the provided gcode appropriate…
Schraubendreher Halter für 4* große Schraubendreher 10mm Schaft und 8* 8mm Schaft. Optimiert für Wera Schraubendreher. Erweiterung zu…
Fits Tegometall pegboard with Euro keyhole pattern. Print Settings Printer: CTC Bizer Dual Rafts: No Supports: No Infill: 25 Filament: ERYONE PETG Category: Tool Holders & Boxes
Deadpool Bobblehead using 3DPrinty's spring and base. Files for spring and base can be found here: https://www.printables.com/model/224836-emoji-printer-bobbleheads Print Settings No Supports needed on model. Printed at 0.12mm layer…
Wall Line Count: 4 Infill: 10 - 20 Supports are not required but are recommended. I increased by “Support Overhang Angle” to 80 degrees so it only targets the true overhangs. Recommend adding glue to the spring contact points. Alien…
Wolverine Bobblehead using 3DPrinty's spring and base. Files for spring and base can be found here: https://www.printables.com/model/224836-emoji-printer-bobbleheads Print Settings I have inclused custom supports in .3mf due to chin and…
This keychain is modeled after a genuine Green Bay Packers Foam Cheesehead. It is scaled down to 1.5 inches with a hole added for a standard #3 ball chain, 3/32" (2.4 mm) ball diameter. The same chain used by the US military for their dog…
Deep within the heart of the mountains, amidst the echoing caverns and glittering veins of precious gems, stands Durin Stoneheart , the Mountain Forger. With features etched by the passage of time and the weight of creation, Durin stands…
verwandle deine ELFBAR in eine stylische Pfeife. die Aussparung an der Unterseite ist groß genug um das USB-C-Ladegerät anzuschließen, eine Kante am unteren Ende des Einschubes verhindert das Durchrutschen. Die Abmessungen sind so dass…
Abraham Lincoln bobblehead for your printer. Just add G-Code and enjoy the bobble! https://youtu.be/3HwXJQMGgsQ https://youtu.be/y7rcWTLWsCM https://youtu.be/5cWb99a7tlI Printing Base, head, and spring can be printed without supports.…
In addition to scaling it up, I remixed the base to use a 6mm x 3mm round magnet (it's all I had on hand and is a bit stronger for the larger size). I scaled the spring to 148% for a more comfortable fit. Everything assembled easily with…
Skadis Halterung um das komplette PARKSIDE Schraubendreher-Set VDE ordentlich aufzuhängen. Support: Erforderlich für die Haken Layerhöhe: nach Wunsch Material: Nach Wunsch Infill: 20%
Kit cards are fun, all-inclusive 3D prints that are printed flat and then assembled. This compact, 3D printable design combines the concept of a postcard with the joy of 3D printing. You can gift it to someone in an envelope, or build…
I used Prusament PETg material. You can see and download my print file for Průša mini+ as well. No supports needed. Please let me know how do you like it and I would be very happy to see another pictures of your prints in comments. Thank…
I was looking for this model way too long, so after some preparation and practicing I've built it myself in Tinkercad. Enjoy! --- Reference The Behemoth is an armored transport vehicle manufactured by Militech in Cyberpunk 2077. In 2076,…
Batman Bobblehead. Printed in PLA Sliced with Prusaslicer Remix from: https://www.thingiverse.com/thing:241899/files
