6863 modeli
HUGE UPDATE 9/13/2024: Dummy 13 v1.0 is now available! Check out the new and improved version of Dummy 13 here. This page will keep the previous beta files to ensure that no one's remixes are broken. Dummy 13 uses a CC BY 4.0 license!…
Lucky 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
Mini 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
Made possible by my amazing Patreon supporters! If you like my work and want more models and pre-supported files for resin you can support me in Thangs This model is support free BUT i recommend you use a support pillar right next to the…
Santa Hat now available! Download it here! A base/diorama builder is now available for download for this mini figure model! ___________ IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS Please note that I am sharing my designs to any one to…
Easy 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
How Xenomorph is made - https://youtu.be/Upa737w-dKQ
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
WARNING: Contains small parts. Not intended for children below 3 years old. Santa Hat now available! Download it here! Printable assembly guide now available for download. A base/diorama builder is available for download for this mini…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Welcome to OpenFigure3D! This is our first fully 3D-printable articulated figure: Iron Man MK3 , as seen on the first MCU movie Iron Man of 2008. The designer is Dany Sánchez , who is also behind MiniWorld3D . Further below are the full…
Introducing Grabby the Claw! This model is designed to use all of the main connection types that you'll find in my 3D printable action figures. It uses only a few grams of filament, and prints in about half an hour on modern printers.…
NOTE! Im not affialted with Pokémon in any way with this model. I tried making Pikachu from Pokemon with makerlabs printmon it is cute so go print it if you want the 3mf version also has multi color for the AMS from Bambu Labs You need to…
After printing hundreds of originals, I decided to re-model it myself to make some small tweaks and changes. The original OpenSCAD code resulted in slightly misaligned tolerances, needing the tolerance to need to be set higher than…
*25th Jan 24 - added larger 2x3 version* Print upright with supports for the top hook and relatively high infill (I used 50%) to add robustness for clipping in to the board. See GCODE attached - tested prints with 0.4 and 0.6 nozzles.…
I decided to try it without support and it worked. I chose the brim around the legs for a better feel. I haven't tried it without it. In order to print successfully, it is important to have a well-aligned bed, a lower hotend temperature…
Alien - Xenomorph - Full Figure - support test from twitter joseph prusa account original from https://www.myminifactory.com/fr/object/3d-print-alien-xenomorph-full-figure-25-cm-82660
Update 2024 April There are two new G-Code files. First of all they now have the seam on the back. Also I added one with 0,1 mm layers so you have that at hand. Also while being at it I fixed the bases of the models, all STLs now have a…
All Carcassonne figures available (including expansions) to replace the ones you have lost or to create full player sets to be able to play with more friends. The figures are separated into two large groups, those that belong exclusively…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Supports needed (organic supports recommended) Scale it as you like :)
A very simple stand, designed to not obscure your figure very much. Designed specifically for the figure pictured, but a very simple modification to the length of the strut would let you adapt it to any height. You'll need two braces per…
NOTE! Im not affialted with Pokémon in any way with this model. I tried making Charizard from Pokémon with makerlabs printmon it is cute so go print it if you want the 3mf version also has multi color for the AMS from Bambu Labs You need…
Cute baby Huggy Wuggy figure. Multipart ,easy to print. All parts are supportless. On eye pupils use color change at height. Tolerances set to 0,1mm. Printer setup: Nozzle diameter 0,4 10% infill Layer height 0.20mm no supports
Hello, seated German Shepherd figure. Thanks for your download, enjoy the print!
The most meticulously organized Lego Star Wars collection A complete list of 55 Star wars factions available to download: At Attin Black Sun Bondsman's Guild/Bounty Hunters Churches of the Force CIS Separatists Clan Djarin Clan Fett…
This is a remix of Mao Zedong's figure, I added platform to. Was made as a gift to my friend.
This is a small remix of a mouse figure so that it can be positioned and securely attached to my Safety Door Stopper/Bumper model via a clip. The clip itself fits both the old 2019 design as well as the new 2023 design of the Safety Door…
Fully movable huge Lego Figure as a toilet paper roll holder Scale ~10:1 individual movable arms, hands, legs and head (depending on your printer settings & quality you should use different shoulder parts to ensure the arm is turning…
Jedná se o šachové figurky, které se sestavují maximálně ze tří částí. Podstavy jsou rozlišené třemi různými výškami - kůň a pěšák sdílí jednu, král s královnou druhou a věž se střelcem poslední.
Figurka na klasickou hru člověče nezlob se. Tisknuto z PLA a Wood filamentu.
I Remixed The Model for faster print less trash and user without MMU or any other Multicolor Setup
Hello, last revision of He-Man figure. Enjoy the print!
Hello, Swole Donald Trump figure. Enjoy the print!
The figurine consists of two parts for a better print, the head goes to the base on a solid, no need to glue, if necessary, adjust the hole in the base
Print “Lego_Stud_Diameter_Test” first, test it and choose the right diameter size for your display stand models. Every display stand model comes in three different stud diameters (4,9mm 5,0mm 5,1mm) and in two versions (stud compatible…
Update 2024 April There are two new G-Code files. First of all they now have the seam on the back. Also I added one with 0,1 mm layers so you have that at hand. Also while being at it I fixed the bases of the models, all STLs now have a…
Hello, Kaws - Let it go figure. Thanks for your download, enjoy the print!
Hello, Hello Kitty Godzilla revision. Thanks for your download, enjoy the print!
Christ Figure Plaque / Pendant
originally by @Stigern
I printed here with tree supports and i used an AMS for the multicoloring. I hope that's it is a lovly Christmas Gift or a Cute Decoration! Check out my other models HERE ! Enjoy and have a great day! Powered by PrintMon from MakerWorld…
I printed here with tree supports and i used an Bambu Labs AMS for the multicoloring. I hope that's it is a Cute Decoration! Check out my other models HERE ! Enjoy and have a great day! Powered by PrintMon from MakerWorld…
Hello, Today I have a Stranger Things shelf for 12 Kinder Joy figures for you. The shelf is designed to display figures from Kinder JOY eggs. It is designed for 12 of these figures. If you have more, you can put them on top :-) Happy…
Držák papírových postaviček pro mé inserty do hry Karak. Určeno pro nové 20 mm stojánky postaviček (2. vydání a rozšíření hry už mají tyto stojánky):…
This is a sweet little decoration figure of a santa, and is perfect as a give-away or a little gift for christmas. Thank you for your interest! Feel free to share your prints or print files with the community! Design by ejo, downloaded…
2x4 or 3x4 figures holder Print without support, enable bridge mode
Hello, simple Bearbrick figure. Thanks for your download, enjoy the print!
Henry snaps together and his eyes can be posed. The gcode for his eyes contains a pause to facilitate the color change. All my models are free to download and remix. If you appreciate them, please leave a download and a like!
🎬 Video: Watch how I brought this 3D model to life, layer by layer. https://www.tiktok.com/@3dprintfactoryat/video/7539104524838079746 ℹ Discription: This chibi-style Ghostface figure combines playful proportions with the classic horror…
Chibi Samurai figure. Size approx. 70 mm. Recommended layer height is 0.16
Držák figurek pro mé inserty do hry Karak. Můžete si vybrat ze dvou verzí - svislé nebo vodorovné uložení. Každou verzi pak můžete vytisknout bez textu, s textem a s barevným textem (stáhněte upravený tiskový soubor a na výzvu tiskárny…
2 files one is Flowerpot and the other one is minifigure
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Figure holder for Karak 2. The model is printed from PETG material, which is more flexible. The model is printed on a PRUSA MK3S+ printer and I offer STL, GCODE and 3MF files for everyone to choose as needed.
I printed here with tree supports and i used an Bambu Labs AMS for the multicoloring. I hope that's it is a Cute Decoration! Check out my other models HERE ! Enjoy and have a great day! Powered by PrintMon from MakerWorld…
This is a Remix from 2 other Models. I needed a Box to transport my DnD Figure to the Gameplace without damage. I cant find good Models for that so i remixed this 2 models. The Box is from Whity :…
I printed here with tree supports and i used an Bambu Labs AMS for the multicoloring. I hope that's it is a Cute Decoration! Check out my other models HERE ! Enjoy and have a great day! Powered by PrintMon from MakerWorld…
You are probably a Lego fan if YOU tapped this model. This model is an accessory for Lego minifigures across the world allowing them the freedom to work out and get jacked. If you made a Lego model gym, it would be perfect for it! Please…
The full-size model is printable on the Prusa Mini+ in multiple parts. The two body halves can be printed with very few supports. The hands and pickaxe are printed separately. The rectangular tab is used to connect both miner halves. The…
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Just slide the individual colors into the template. Must use a hammer.
Držák figurek pro mé inserty do hry Karak. Můžete si vybrat ze dvou verzí - svislé nebo vodorovné uložení. Každou verzi pak můžete vytisknout bez textu, s textem a s barevným textem (stáhněte upravený tiskový soubor a na výzvu tiskárny…
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. 2 models: high quality and low poly. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No…
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Bring Tony Stark to life with this highly detailed Iron Man model! This download includes two ready-to-print versions to suit your setup: Multicolor Version (MMU Ready): A pre-painted 3MF file configured for multi-material setups (Red,…
should be able to print without supports but adding some may improve the quality of some areas feel free to mod as you see fit added a 2nd version with a hole for a pen, marker etc so u can put something in his bag.
Insert for 14 pcs of 3D figures in the game (since the Darius figure is also on sale, a version for 15 figures is also available) - you can place figures with or without a colored ring. Space for storing a round curse coin on both sides…
Just slide the individual colors into the template. Must use a hammer.
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Just finished Bomb Rush Cyberfunk and completely fell in love with it. So I decided to make a model for fellow fans and 3D print enthusiasts! I will probably update this at some point with more accessories (Boost pack, skateboard, bike,…
Just slide the individual colors into the template. Must use a hammer.
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Kids broke the base for the figurines of the Ravensburger Labyrinth Board Game. Quickly designed this alternative in Blender. It should work for other themed board games where the paper is the same (aprox. 1mm thick). I've printed it…
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Hello everyone this is a remix of the great design of the minifig control desk, but it has been modifed for the prusa mini, works great and doesent seem to effect input shaping at all. You can use glue or magnets to hold it on.
I like this symmetric presentation of the figure eight know and I wrote some code to make Celtic knot.
Hello fellas, simple Kaws x Megaman / Rockman figure to enjoy. Ran out of blue filament. Thanks for your download, happy printing
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
flat chess figures - height 5 to 7 cm with a magnetic cell inside (2mm * Ø10mm)
0.20mm change the color at layer 6
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Any feedback would be greatly appreciated . Preview images rendered in Blender Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Santa Hat now available! Download it here! A base/diorama builder is now available for download for this mini figure model! ___________ IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS Please note that I am sharing my designs to any one to…
A base/diorama builder is now available for download for this mini figure model! ___________ IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS Please note that I am sharing my designs to any one to enjoy but for personal use only . I have NOT…
This is a big toy human figure . I spent a lot of time making this model from scratch to match the original design while making tweaks for tolerances, printability, and strength. While there were a number of brick figure models I found…
This is a cool model of a gorilla tag monkey. for best printing results print at a 45 degree angle on his back and add supports, be gentle removing the supports so you don't damage the joints or fingers of the model, and give it a good…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
More design on: https://www.patreon.com/c/mortex3d PATREON: Mortex.3d INSTAGRAM: Mortex.3d
Introducing our newest creation: the Articulated Forest Dragon! 🐉 Embark on an enchanting adventure with our intricately designed 3D printed toy, perfect for young explorers and dragon enthusiasts alike. Now available in a convenient…
A print-in-place figure of Optimus Primal from Transformers: Rise of the Beasts. Created by Nikko Mendoza.
Santa Hat now available! Download it here! A base/diorama builder is now available for download for this mini figure model! Download the different tiles here for the Enderman to carry around! _____________ IMPORTANT NOTE ON COMMERCIAL USE…
Introducing the Loftyo figure! The incredibly articulate, insanely expressive action figure for displaying, playing, and animating. This figure is the result of five basic craft prototypes, hundreds of hours spent learning blender and 3-D…
This Bowser/King Koopa statue is free-standing, game-accurate, and a great display piece. Printing Guidelines The STL file has each part in a position that allows for the supports to be removed as easily as possible, and for the quickest…
Introducing our newest creation: The Adorable Bamboo Panda! 🐼 Embark on a journey of cuteness with our charming, chubby panda keychain, designed to capture hearts and bring smiles wherever it goes. Crafted with love and attention to…
I printed this model on my Bambu Lab P1S using eSUN PLA+ filament, 0.4 mm nozzle, 0.16 mm (0.2 mm for low-poly) layer height, 2 wall loops, 15% infill, automatic slim tree supports at 25 deg. threshold and on build plate only. Since…
