Fist Coin
Coin with a fist engraved in it. Uses art from PublicDomainVectors.org .
- Pobrania
- 151
- Polubienia
- 14
- Ocena
- 5
225 modeli
Coin with a fist engraved in it. Uses art from PublicDomainVectors.org .
Alexander the Iron Fist (Pot boy) from Elden Ring. Base versions of the model and detailed models made via displacement. I printed these models with much success using SLA printing (Photon S). FDM printer may have trouble especially with…
ceramic: www.instagram.com/p/BM1wO67hjZg plastic: www.instagram.com/p/CCW6ZI aluminum: www.instagram.com/p/CR2FbZzpuH7
I liked the original design from entomophjle (https://www.thingiverse.com/thing:594693) in how simple this was to print the base, versus other designs for a paracord monkey fist jig, but the dowels were not easily printable on their sides…
This is hulk's fist goes from broken wall lamp. there has to be zero infill for the fist and 3-5 perimeters. It depends on the color of the pet-G filament. my print is from Prusament PETG Neon Green Transparent,…
Ideal gadget for your messy table. You can put here all your pens and pencils. It is very fast and easy to print. You do not need any supports.
Info: another hand model for valve cap Not for presta valve! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already scaled original to best fit, so just print this at 100% scale or adjust slightly. 3mf file…
Fits 21.5mm faucet aerators. You can scale it up or down to fit any size of this aerator. Print it upside down with a Raft and supports, like the example in the photo, so the pins are printed last.
This is for making a Money Fist using Paracord and 1.25 inch steel balls. Category: Tool Holders & Boxes
Alexander the Iron Fist (Pot boy) from Elden Ring without arms or legs. Base versions of the model and detailed models made via displacement. I printed these models with much success using SLA printing (Photon S). The detailed models have…
Print with supports (all models) in PETG or PLA. If you really want the joints to last a while, Print everything in PETG. I printed the Torso and fists in PLA and the limb connectors in PETG. Update: added corrupted version, enjoy!
layer height of 0.2 mm
Print at a layer height of 0.2 mm
Ever since playing Elden Ring I wanted an Alexander Planter for a house plant, and then I got a 3D printer. I don't like any of the potboy models up here or on other sites, so I sat down and modelled / sculpted him myself in Blender.…
These are a quick, easy mod for your Mini 13! They print with the same settings as well (.15mm resolution). Thanks to Doodle_Monkey for the remix model!
layer height of 0.2 mm
Labour day Raising Arm.
Hey everyone! Check out the video i made for it: https://youtu.be/8iVJ-PJPwXc This is my ballistic Fist from Fallout New Vegas/3. I really put my heart into this one, it's super accurate and hope you enjoy. If you make one do post it…
layer height of 0.2 mm
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
American fist that does not take much time to print no need for support but if you want to put it as you fly
z ⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on…
This model is compatible with the lego system.
I wanted to hold a few lights on our garden fence. So I remixed this fist to hold the lights for me. The fist holds round objects of 21mm and screws in with two wood screws. I printed mine in Petg with organic supports and they came out…
This idea was inspired by the survival paracord bracelets that are meant to ensure the wearer always has a length of cord. I always liked the Monkey's Fist knot, and thought why not put something useful inside rather than a wooden ball?…
Ms. Marvel's Enlarged, Embiggened, fist with hollow with hand hold. Remixed from: https://www.thingiverse.com/thing:1398942
COMMERCIAL LICENSE ACCESS is available through a patreon membership where you help support me and get commercial license which applies to all my models except remixes i made from others work. https://www.patreon.com/Dengamleninja
Made a simple plague and stand of Goku and Vegeta fist-bumping. Easy to print in multicolor (prusaslicer picked up on it automatically during slicing and added the color pause). Nothing special needed for printing, though I use a 30%+…
Voxel Spoon Pipe for 14mm bowl use Print Settings Supports: Yes Resolution: dynamic Infill: 20-30 Notes: Supports touching buildplate only Category: Sculptures
Force FX stands used to be awful. With the Force FX Elite line, Hasbro came up with something much better. The Kit Fisto Force FX lightsaber had a removable blade and therefore deserves a stand in the style of current Hasbro Force FX…
Monkey fist jig and the cube to put in the middle of the monkey fist
Inspired by the most recent Deadpool & Wolverine film, I present a fist that has the iconic wolverine claws coming out! Printed with no supports! 15-20% infill Can be printed with skin tone filament and metallic filament! Example shown…
Print each piece plus 2 of the joints to attach them together. Should be printable without supports provided you have good bridging capabilities!
Monkey fist shaped keychain looking like an object made of paracord. The monkey fist is hollow. Diameter 42 mm (1.65 inches). This is an easy print. The monkey fist comes in two parts which must be glued together. There is a 4 mm hole to…
Fallout - Power Fist. Resize so it fits your arm. WIll probably want to strategically spit and print on two plates.
Hey Chad, Had a play with the PDO files you send and did what I could. Time is not on my side of late so I've chucked up what I could but there is still lots to be done to complete this model. I pulled other files form the game and added…
A big Hulk Fist for your cans. Takes a whole lot of time to print, but it's reasonably rewarding! It has two pieces: The fist and the can holder. Stick the latter in the first, if you want to, and add a few drops of glue.
Dominate the Turmoil expansion with this fist of dominance. Why be a boring white cube when you can fist your party into dominance? Stylized fist based on: https://dryicons.com/icon/fist-glyph-icon-13067 Small base to keep upright. Base…
Print with supports, use at your own risk
Here's my take on the Algox Icefist! At least, I'm guessing that's the right name for this guy, as the artwork's been posted, and the list of monster names has been posted... but I haven't actually been able to find anything definitively…
I regularly fill up the entire plate when printing and need the bottom layer to be pretty good everywhere. Over time my printers developed a dip in the middle of the build plate so this was just an easy way to find the low spot and…
layer height of 0.2 mm
layer height of 0.2 mm
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
rhdfhgfbbfghytgfcvbnhgytgfvc
A fistula arm clamp is a medical device designed to temporarily block blood flow during vascular procedures, such as the creation of arteriovenous fistulas or grafts for hemodialysis.
Um modelo 3D monocromático de uma mulher em pé, usando biquíni e segurando uma prancha de surfe verticalmente ao seu lado esquerdo. A figura apresenta proporções atléticas, postura confiante e detalhes anatômicos bem definidos, com o pé…
فلسطين حرة This model was made for multi-color printers only, but I added the Fusion 360 file in case you want to modify it. Also if you need a different hole size. The provided hole sizes range from 3 to 6 mm in 0.5 mm steps. The base…
Coin with a fist engraved in it. Uses art from PublicDomainVectors.org .
layer height of 0.2 mm
This is a remix of Hulk's fist, originating from Dape's cookie cutter collection . The source design was not durable enough for the kids to play with so I made a new split version consiting of outer ring and stamp. Besides the enhanced…
12mm (¾ Inch) Sphere for Monkey Fist. My son makes Monkey Fist Begleri “Fidgets” (A Greek Toy) with ¾" steel bearings. Unfortunately due to issues with my hands I can not use them. I had been told they were good for helping with hand…
Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
Quise diseñar un arma en el antebrazo y utilizar Ballistic Fist - Fallout como modelo, es mi primer modelo acepto sugerencias
Fist bump gunbuddy or Riot buddy from Valorant.
Meet the FistClip The Fistclip is A Super cool and efficient filament clip PLUS it is easy to Print! BENEFITS: • Built-In Self Adjusting Clamp • Firm Grip • Fantastic Design • Makes you Happy! Note: •The FistClip can be used commercially…
I really don't like the position/location of the filament sensor on the Elegoo Neptune 3 Pro. I liked the concept of the one made by ststevevenen, but it really needed to have a support on both sides of the top rail for better support.…
Another version of one I'd previously put up. This one replaces the filament sensor. I never used mine and the movement of it drove me crazy. This one gives a more direct line from the spool to the printhead. I used an M3*10 screw and…
These jigs are sized for ball bearings ranging between 1/2" and 2" in diameter. There is an indentation that will lock the ball in place preventing it from sliding around. I recommend printing this with the handle towards the bed and the…
Price Pfister should replace these for free, but I didn't want to wait so I designed my own wingnuts as my originals have mostly broke and failed. I printed this in PETG. Also if you don't want them so snug you can always increase the…
Monkey Fist / Affenfaust For finding your keys in your pocket easy / um dein Schlüssel in der Tsche schneller zu finden Ø 25mm Ultimaker S5: PC (white) Breakaway 0,2mm layers 30% fill 1,2mm walls
This model is compatible with the lego system.
Bar Clamp Pad - forPower Fist brand clamps, the ones that came with the clamp fell off, these snap in place snugly with a satisfying click. Designed to fit these clamps:…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
If you know, you know. This wristband is inspired by the iconic phrase from Project Hail Mary by Andy Weir - a subtle but unmistakable nod to Rocky and galactic friendship done right. Features: Clean lettering Minimal support required…
if you want mods to the fists or claws, please comment what you would like to see
Astronaut perched on a rock Printed using Bambu P1S 0.4 Nozzle 0.16 Layer height Auto Tree supports
In proper Klingon form, this model really fought me but once I had the concept in my head I couldn't let go. The provided file is a bit on the "display" side; it's probably fine for those soft Federation officers but I'd recommend…
Popular symbol of a fist. This is an OpenScad Script May be printed hollow or as a stacked multilayer print (black on a white base?) Options include lettering, scale, loop for ear ring, hollow, Thickness adjustment etc.
hello there, with this jig it is setup for use with a golf ball as the base to the monkey fist.
Printable Monkey's Fist Keychain
This collapsible print-in-place GoPro selfie stick is designed for ease of use. When you swing it out, it doubles in size for wide-angle shots or group photos. The selfie stick also features a rotation mechanism when collapsed by turning…
A dwarf striking the ground with an electrified hammer, lightning carved into the base. Solid, printable model. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
The Two Fisted Slopper Coaster, beloved "mascot" of the Milwaukee Brewers classic video at County Stadium. Printed with light grey > white > black.
This new innovative DJ encoder knob gives you the ability to either make a stand or fist bump your equipment afer a gig.
Increased the kill potential of conventional battle tops Material: PLA Layer Height: 0.3 - 0.4 mm Perimeters: 2 Infill: 15% Gyroid Supports: Recommend Organic/Tree Supports for Launcher Hanle Only Parts Sanp Together - No Glue Required
This Hulk Fist Pen Holder is a bold desk organizer with a powerful superhero-inspired look. The design features a large clenched fist shape in deep green, with an open top that holds pens, markers, styluses, or small desk tools. Made from…
This pestle repair model is hollow and tapered to fit the geometry of most pestles. Carefully measure your pestle using calipers then use a measure tool in your slicer in order to make a snug fit. Supports suggested.
layer height of 0.2 mm
Peg should be a tight enough fit to not require glue. Printed at .15 Layer height with organic supports. Fist is same as original design.