966 modeli
Commercial license - https://www.patreon.com/MeasureOnce Harry Potter Series: Sorcerer’s Stone - https://www.printables.com/model/914416-lithophane-books-harry-potter-book-1 Chamber of Secrets -…
Wydruk około 3,38 €–4,13 € nettoWstępna wycena jednego wariantu
Resource Tokens for the board game Flamecraft. They fit in laser-cut player boards designed for the original wooden tokens! Printed with 2 layer changes so they are dual-coloured on both sides. Project files for PrusaSlicer (.3mf) and…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
So that you can also see the flames from the addon Carnage at Devil's Run on the road. It took a few attempts to find the right size. For the cars, simply clip them on the roof and for the motorcycles, from the big rig and the final five…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed in prusament orange PETG at .15mm layer height using 0.4mm nozzle. I used 8mm raft to help with adhesion to the bed. Toward the top it gets pretty hot and might droop a bit so you may want to snip that part off or stop the print…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This one’s on fire – literally. The Flame Skull blazes with stylized flames erupting straight from the bone, fusing anatomical detail with raw energy. Whether it’s a nod to hellfire, speed, or sheer attitude, it’s impossible to ignore.…
Wydruk około 7,42 €–9,07 € nettoWstępna wycena jednego wariantu
A joke that I've spent too much time on: One of my airsoft teammates loves watching the hottest trends in the real “tacticool” shooting and considering the choice of a muzzle device, often kept repeating, that the best type ever is the…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Disclaimer: I started this project a long time ago and learned a lot about modelling in the meantime. This means that the model isnt as well done as other newer ones, but i still wanted to publish it, in case someone else would like to…
Wydruk około 6,16 €–7,53 € nettoWstępna wycena jednego wariantu
Do you have a special someone who likes Flamingos a lot? Say No more! The Flamingo Head is now mountable on the Wall! The original Model was KI-generated, the changes were not. You can either Print the Full model or the three Parts…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
Clip für Leuchtstofflampen, Feuchtraumlampen
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
A simple candle that I made with a flame.
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Window for firehouse for training kids
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
amazing model done by sunset 3d! layer height: .2 infill: 10-30% Model origin: https://www.thingiverse.com/thing:5337105
Comes with 2 variants - standard or keychain Fully print in place with no brim (printers with low adhesion may require a small support under the beak only) Highly flexible but can stand on his feet
Meet Drako, the softest dragon you’ll ever print! With his cute horns, squishy tail, and big bright eyes, he’s here to melt hearts—not villages. Fast to print and support-free, Drako is the perfect blend of myth and cuteness.
The Flaming Cauldron A Cauldron with a base of perpetual Fire where the flames have been petrified and have become part of the Cauldron its self. It is said that this rare artifact was successfully enchanted by its creator to survive…
Digital 3D model of Beauxbatons Academy of Magic wand (Whole/Parts) Classic . This model is a fan-made replica of the wand from Harry Potter. We designed the wand based on different motives reminding the French wizarding school of…
The Flexi Flamingo is a charming and interactive model that consists of a series of interlocking parts, designed to mimic the graceful shape of a flamingo. Once assembled, the flamingo's body can be bent and posed thanks to its…
May need to scale down a bit. The image is about 15% scale
Optimized for 0.8 or 0.4 nozzle, and 0.32 layer height. Edit: Added a .f3d file for anyone who needs to make mods or remixes Since @olivvybee already has a good minimalist insert created for Flamecraft, I figured I'd make one that was…
My son plays a lot in his toy city. He especially likes when things burn and there is a big fire where his fire department is required to rescue the city. To mark the spots which burn and need attention he uses these flames. Print…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
A graceful little flamingo with a smooth curved neck, rounded body, and simple stick-like legs. Its beak is softly stylized, and dot eyes add a gentle, calm expression. With a clean silhouette and subtle 3D printed texture, this flamingo…
The scrying pool makes a dandy modular prop for gaming. We decided it required a few more inserts. Here's a giant flame that fits neatly in place where the water insert would go. It's not a proper flame unless you can see it from orbit.…
A friend of mine got Flamecraft, and asked me to make an insert for it as a birthday gift to her. So you KNOW I had to make the absolute BEST organizer insert ever! This insert will help you organize the game in the box, but it can also…
I designed the Olympic flame for the Paris 2024 Games in scale 1. You need a large enough print volume to make it in scale 1. In the future, I'll do a version with a flame. The upper part is supposed to represent the Eiffel Tower and the…
I printed a couple of 3DPmom's Rockets for my girls and was truly inspired by them. They were so simple and fun to fidget with! But I wanted something a little more realistic, so I studied her design and built this minimalistic version of…
It is a sad fact of life that the enemies the Roman legions must face often taint and defile the ground the wage war on. Millennium of experience has taught the legio that flame will burn away even the worst of the rot! If you would like…
Hogwarts flaming cauldron Printed without support, 5% infill.
Flamingo Bookmark, or for any other flamingo needs. The pictured Flamingo was printed at 90% scale Category: 2D Art
When Halloween’s shadows awaken and the night grows cold, let this little Jack-o’-Lantern guardian stand watch. Light your spooky candles, summon a flickering glow, and keep a flame close at hand—lest some grisly ghoul come creeping from…
The “flame” is hollow with thin walls, so the center LED can shine through. Print with transparent material for an even better effect. Print settings Supports touching buildplate (only needed for the base) Use support blocker to avoid…
One piece Best way to call Don Quichotte Doflamingo
This is the Elderflame Vandal pulled from the Valorant game files and optimized so they are actually printable, Enjoy. -WARNING: NONE OF THE FILES ARE SCALED CORRECTLY MAKE SURE ALL THE TEETH ON HEAD HAVE SUPPORT Print Settings Printer…
🔥 Cover up that boring lighter! 🔥 Always have a flame on hand with three different styles to match your vibe! Did you know that Bic is celebrating their 50th Birthday this year!? You too can celebrate 50 years of flicks! It's time to…
This model is compatible with the lego system.
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Just some flames for a decorative project. Category: Art
I found myself in need for a candle flame to use with RGB-LED-strips and an Arduino in a holiday decoration project (which I obviously barely finished for said holidays. But there is always next year). This is a simple shape sculpted in…
This is a single extruder variant of my second articulating dragon design, the dual colour version is also pictured above. It includes a few improvements over My original dragon ( Rupee the Articulated Dragon ) including improved…
This stunning dragon with feather-like blue wings and a fiery orange body will add color and charm to your collections!
An unnatural green flame bathes the insane undead flying skull. Echoes of its mad laughter echoes through the dungeon halls as this disembodies menace blasts all intruders with devastating rays of fire from its eyes. And, if you manage to…
A new 3D figurine generated by AI, a pink flamingo. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This is my model of the flaming torches from Hogwarts modified into a candle holder. I remixed https://www.thingiverse.com/thing:18218 by cushwa for the owl models. Candle hole is ~2.2" or 56mm at 100% scale according to whatever size you…
Have fun. i cutted the pieces again in halth and glued them together. it is still work in progress but looks good so far
I suck at drawing flames so here's a stencil. I'm new at 3d modeling and this is one of my first few designs. my printer is currently broken so I could not test print, if somebody tested and uploaded a make for me that would be sweet! I…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
This is a box insert for Flamecraft designed to keep all the components organised in the box and make setup faster. I prefer the “dispenser” style for the resource tokens rather than storing them in a tray because it doesn’t require a lid…
As mentioned before, this a flamethrower model for the Dummy 13 action figure. For a while, I have been looking for a flamethrower model for my wide collection of Dummy 13s, and have had no success. I decided to model one myself and put…
Print with the same settings as the launcher, drop it in with some glue, and you're good to go!
The tele snail from Donquixote Doflamingo from One Piece! Size: 13cm (1:1)
This is my second dual extruder flexible dragon model. It includes a few improvements over the previous model ( Rupee the Articulated Dragon ) including improved printability and a better movement once printed. Once printed it measures…
Split version of my v2 realistic style Snow Clone / Flame Clone Trooper helmet (version 2) in 1:1 scale for cosplay. Includes a faceplate without the visor. Please print at 90%-95% as it seems I scaled it slightly large (for big heads) or…
simple stencil for flames Category: 2D Art
Just a little stylized flame I made with ai and made printable. It prints nicely with a little support
This swirling flame lamp is designed to glow like an ancient relic. The flame element prints in translucent filament and diffuses light beautifully, while the base is styled to feel arcane and artifact-like. It fits an LED puck…
Traced from the Google Noto emoji. Use a color change command (M600). Ironing on all top surfaces is optional, but gives it a nice finish.
This is the (remixed) SnoodLife model from https://www.thingiverse.com/thing:6470202. It is intended to hold the coins for the game. There are some irregularities in the bottom of the well, which may be good to smooth out before printing…
Files processed through Microsoft 3D Tools upload to reduce file size and ensure no mesh errors. Jaw separated from skull, and skull separated from flames to minimize supports, marring, ease of printing and allow multicolor (I'm too lazy…
Embosser for paper and cardboard with hearts, Rose, Bird, Hummingbird, Swallow, Seagull, Flamingo, Dolphin, Seahorse, Angelfish, Cheetah, Clover, Infinity symbol Try version V2 with 0.3mm clearance if the hinge sticks. Hinge system…
New V2 Added! Faster print and more compatible. Version 1
Llavero del equipo Flamengo de Brasil para imprimir en tres colores con tal solo un extrusor. Viene con orificio para ponerle el llavero Alto 5mm Ancho o Largo es de 5cm y la otra medida es proporcional. De esta forma siempre se mantiene…
Fits all the components of Spirit Island + Branch & Claw + Jagged Earth + Feather & Flame in a single box, with minimal lid lift (9.6mm), for sleeved cards. I only left the rulebooks and helper cards out - everything else is in the box.
Flamethrower model ripped from the tf2 game files.
A few "beads" to make necklaces or bracelets or something like this. Owl Unicorn Flamingo Butterfly
A Flameskull. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Flamingo Cookie cutter ~10 cm height Printed 0,2 mm layer Pay attention to the legs when you cut the dough (need some care).
I created another flame-shaped LED tealight candle holder , it's made for a standard size (37mm dia.) , but you can scale it as you want . My print settings(PLA): 0,16mm layers / 2walls / 10%gyroid / No supports / Fuzzy skin 0.4-0.2 Happy…
Źródło oznaczyło ten model jako treść 18+.
Flamecraft coin, image turned into a lithophane and modified to be printable. Print upright with support. 25mm x 3mm
30 March: If you downloaded files before today, Jaw was missing. It's now here. No changes were made, so you can print it with confidence to fit skull… Sized up from last flaming skull model (297mm tall) Holes and tubes added for fitting…
This is a cool model that I found on Sketchfab from RISD Nature Lab. This model is easy to print. Just follow these quick tips and you should have no troubles printing. Make sure that the model is printed in the same orientation as given…
Flamingo Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This design will need supports and should be scalable to most sizes.
This model is compatible with the lego system.
Castanets , also known as clackers or palillos , are a percussion instrument .
This model is compatible with the lego system.
A remix of Patrickart's beautiful Charmander model - use it as a night light, as a showpiece, or give it to someone you love! Bill of materials All four 3D printed parts Three 10mm M3 self-tapping screws One 2x2032 coin cell battery…
Complete re-design of the coin using new methods.
I modified MZ's great Bone Demon model to use as the Gloomhaven Flame Demon. I really liked the general body shape that MZ had created, but the Flame Demon ( http://www.cephalofair.com/wp-content/uploads/2015/09/Flame-Demon.jpg )…
This model is compatible with the lego system.
A gnome alchemist with oversized round glasses, holding a bubbling potion bottle, hat shaped like a twisting flame.
3D Printed stencil for spray painting flammable logo on boxes and containers. My models are not to be shared on any 3D Model website that requires the user to create and use an account to access models. I.E. the model is NEVER to be…
A remix of a remix, removed the (suspiciously Chaos-y) eyes on the hilt and simplified the polygon count. I'm going to be using this for a Nemesis Greatsword, but you do you. Category: Toy & Game Accessories
Made a Thing that should look kinda like a Torchflame. I put a LED-Tealight in it and it looks pretty nice. Please resist the urge to put a real tealight in it =D Burn possible Strings with a lighter. Made it with 0,2mm layer hight in…
Step in to your own oasis! Print instructions I printed with PLA with a color change at 2.3mm. I used green for the base and pink for the top layer. Check out the Thingiverse link at: https://www.thingiverse.com/thing:4279375
A flaming sword modified for use with Dummy 13. Printed in PLA with .15 layer height, 100% infill and tree supports, and brim.
Modeled this up for fun. takes a few pieces of 1/2 in and 1/4 in dowel. will probably need gluing and sanding. Measures a total of 24inches long and is split up, also has a removable mag and ammo. Category: Props
Blue Flame Pedestal From Zelda Breath of Wild
Because flamingos have long legs, they can wade into much deeper water than most other birds . Webbed feet support them on soft mud. When the water is beyond their wading depth, flamingos swim at the surface while feeding. Webbed feet…
Update: Added no logo 100mm version, removed all others. You can scale larger (or smaller) from the 100mm (~4") version. Stretching in Z only, taller or shorter, yields some interesting versions. This is the first in a series of twisted…
A 3D printable old school style oil lamp. Designed to hold a "Flame Bulb". Inspired by Adam Savage's video on Tested.com but couldn't get hold of a similar lamp at right price in a reasonable time frame so designed my own. The lamp was…
A flame LED Tea light cower. Use clear or transparent PETG. Use PETG because it is clearer than PLA. Use VaseMode only. Print Settings Supports: No Resolution: 0.2 or 0.3 mm Infill: no Filament: - PETG Clear or transparrent color Notes:…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP I’ll be gradually adding colored profiles for the Mini Zoo…
![[Elden Ring] Sword of Night and Flame](https://media.printables.com/media/prints/382817/images/3212591_3c3947cf-ee97-4011-a7de-25c247166cac/whatsapp-image-2023-01-28-at-204409.jpeg)
