Liczymy pasujące modele…
Easy to print. No supports needed. Simply load flossers as seen in picture, insert twister, snap on base. Designed to work with Meijer brand interdental flossups . Also works with Aim brand precision floss picks (thanks @Lacemaker!). Will…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
I designed this dental floss holder, to help make the disposable floss picks obsolete. This is the 4th iteration and final design that I came up with, it fits a spool of floss from a standard Reach dental floss pack, and uses the floss…
This is an improved version of Laetiporus 'Optimized dental floss holder' it is easier to thread up uses less dental floss stays tensioned
A nice simple reusable flosser. Thread the floss through the holes and wrap around the handle to secure.
A holder for standard Kroger brand flossers. Will hold 3 flossers. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.15 Infill: 20% Filament: eSUN PLA Grey Notes: There are holes embedded in the…
What matetial to use and how see the original model. Update: I have designed an alternative lid construction for those whose threading may not work. And wall mount for 4 dental flosser holders P.S: Their diameter measures 7.4mm. If their…
Hated having the bag of flossers floating around in the bathroom drawer. This was a great solution for the medicine cabinet. Viewer suggested making them stackable. This should now be able to be stacked with itself or with the alcohol…
Mine warped due to bad bed adhesion but the model still works great.
This cordless power flosser is a bit of a pain to store because it doesn't come with a stand and you want to separate the parts so they dry properly in-between uses. So I made one :) The reservoir is stored upside down to aid drying and…
📄 Model Description This is a custom-designed stand for the Philips Sonicare Cordless Power Flosser 3000. I created this model because the flosser isn’t very stable on flat surfaces — it often tips over when accidentally bumped. The stand…
Nicwell water flosser attachment holder for 5 attachments Please post your makes :)
Print in place tooth pick case for Dentek Brand “Triple Clean” tooth picks. Holds two tooth picks and takes four 5x2mm magnets to shut. Prints best with .4 nozzle, .12 layer height.
Modified Tim's flosser to add a finger hole for better grip. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .20 Infill: 100 Category: Other
Wall mount holder for Philips Sonicare power flosser nozzles. Can be secured with either screws or double sided tape. Should print just fine even with 0.3mm DRAFT profile in PrusaSlicer (0.4 mm nozzle).
The holder can be printed twice, it will hold the water tank separately so it can air out. I opted for tape to mount it instead of drill holes but you can just as easily add that to the design. I've added the freecad model for people to…
Since only the top-of-the-line Philips Sonicare PowerFlosser comes with a nozzle storage case and other models do not, I designed a nozzle holder.
Note: The reservoir funnel is designed for one-directional use. The circular part goes into the water reservoir in the back of the WaterPik and the rectangle is supposed to fit onto the head of a sink. Although it is specially designed…
I wanted a way to use my normal dentalfloss for my Jordan green clean flosser handle for environmental and economic reasons. And since i already had the convenient handle, it made the most sense to just make a head for it
Printed the original a couple years ago, love it, traveled with it, but it has seen some things. When it came time to reprint, I realized that there was an opportunity to merge the accompanying item on my countertop in the form of the…
I needed something to hold my toothbrush, toothpaste and flossers in our 1/2 bathroom that does not have a medicine cabinet - so I designed this in Fusion 360. Print in PLA with no supports, which worked, but was a bit rough on the tops…
Flossers are sold in different shapes, please check the size before printing. To load or remove the flosser, simply rotate it 90 degrees. I printed from PETG with brim, without supports and positioned the model as shown in the screenshot.…
This is a stand for this water flosser (https://amzn.to/4iSv1RU) to help keep the reservoir dry and store the extra heads.
If you want a simple box for flossers, that is what I wanted. I designed this in Tinkercad - it is no work of art. I also added on a cool handle using glue (I recommend 3Dgloop or gorilla gel). I suppose I could have build the top WITH…
Created a holder for dental flossers in fusion360 and printed on the Creality K1, using Creality Hyper PLA. The holder will hold 20 flossers.
Wall Mount Base for Philips Sonicare Power Flosser 7000 – Compact & Hygienic Bathroom Storage Keep your bathroom organized and your power flosser within reach with this custom 3D-printed wall mount base . Specifically designed for…
Print the cup and your choice of flosser holder rings. The ring slips on easily and doesn't require any adhesive. You can easily modify the cup size and the flosser ring in the included scad file to make it your own. For example,…
Beiber case for 6 flossers. One and two colors Stls.
Original floss holder from Jordan has very curvy shape and most of my teeth are straight, so I had to constantly adjust angle and motion to floss properly. Alas I modeled a new handle inspired by ROCS toothbrush. Printed from PETG it's…
Holder for Quip water flosser with flat back to directly mount to the wall using double-sided tape.
The paper/plastic packages these things come in are a real pain in the butt. This holder should store about 20 of the flossers. Printed in PETG for water resistance as I use this in the shower.
Insert the thick straw only as far as the reservoir shaft so that the balls can fall freely. Stick the brcko with adhesive tape. For effective shooting, plug the hole in your mouth with your tongue, pressurize the air, and quickly insert…
added two more nozzle holders
Well it holds the Oracura Water Flosser Stand/Holder
A base for the Caresmith water flosser. Could fit other brands with similar design as well.
Recently I bought a ocealan tooth brush and a ocelan w1 air flosser. There are some cool wall mounts provided for the tooth brush but unfortenately not for the w1. So a desingened and printed my own one. Printed on my bambulab x1 with a…
Our old Airfloss broke so we opted to buy a new Cordless Power Flosser. They come with changeable tips. Unfortunately there is no case and no holder for the nozzles. The Airfloss had a nice Clip-On Gadget that fit over the old…
After feeling the pain in my hip pocket after a recent trip to the dentist, I discovered an urgent interest in oral hygiene. Unfortunately the Philips Sonicare Power Flosser that I acquired didn't come with anything to hold the picks…
This organizer provides dedicated storage space for: 2 electric toothbrushes 1 water flosser Toothpaste Toothbrush cup Additional small bathroom accessories The honeycomb drainage platform allows excess water to drip through, helping…
Small heart shaped box for holding a tooth floss head. The fit is tight. Good to rinse the cover hinge under hot water tap for few seconds before pressing it in. I used 0.15 layer high to preserve details. Prusa MK2, PLA There where few…
Compact tray for holding your water flosser, has a vertical handle for picking up the tray. Prints without supports.
Small heart shaped box for holding a tooth floss head. The fit is tight. Good to rinse the cover hinge under hot water tap for few seconds before pressing it in. I used 0.15 layer high to preserve details. Prusa MK2, PLA Category: Bathroom
Mount them using waterproof mounting tape. Print direction doesn't really matter, I printed it standing up with support. 4 walls, 15% infill.
Holder for 4 toothbrush heads and 4 dental flossers (Plackers or other brand). The design includes a drip tray that is removable for easy cleaning. The drip tray also collects any drops of water from the flossers though internal channels.…
Dryer stand for the Philips flosser. Print: PLA,PETG,… no supports required I recommend slowing down no printing travels on bedslinger 3D printers (MK4S,..)
Merely print using PLA or PETG and screw to the inside of a cabinet door. It has key-hole slots in the back of the rack so there are no visible screw heads.
The on off button on the waterpic water flosser is exposed and sometimes accidently turns on when packed in a suitcase. This cover protects the button to prevent it from geting pressed
The packaging the thing comes in eventually disintegrates, it's largely paper after all, so I designed a box to store the flosser handle along with six weeks of floss heads. Printed in overture sparkle purple PLA (because why not). Lid is…
Requires a bolt with a square section and a nut. You wrap the floss around the bolt and then screw the nut onto it to secure it. Make sure to use a nontoxic filament or a nontoxic coating.
Note : requires double-sided foam tape. The WaterPik cordless water flosser uses a magnetically attached charging cable which is convenient to attach, but which simply gets in the way when not in use. This simple holder holds the end of…
I use 2x of these handles to pull dental floss under my prints to remove them from buildtak™ like surfaces. Prints come off easily and cleanly. If your printer doesn't have a removable build plate, this can come in handy. Much easier and…
a simple wepklin water flosser holder that has a hole that can be used for a screw or double face tape it has holes in the bottom to avoid water accumulation
When organizing the bathroom cupboard i decided i needed a water flosser head holder. The hole is a little tight but after inserting and removing the flosser head a few times it got better for me. The storage on version one is a little…
This is a simple replacement for the plug for the charging port that came with my water-flosser. It needs to be printed in a flexible filament, and is made for a 2mm pitch mini-bowtie plug.
This is a 1:1 identical model of the Oral Dental Water Flosser fauset tip connector thread diameter is 24mm and thread 1mm (24x1mm) this item is sometime difficult to recover and it is not sold seperately. I have also designed it to fit…
A wall mounted cup to hold a water flosser. Mounted to the wall with double sided tape.A wall mounted cup to hold a water flosser. Mounted to the wall with double sided tape.
Water Flosser Organizer Stand with Integrated Cable Management This is a compact, functional stand designed to keep your water flosser and accessories organized. It features a stable base for the main unit, dedicated slots for two…
Straight forward when printing just make sure that you use easy to remove supports so you don't need to file it down. If you have bigger Items you want to put in it size it up but it is perfect size for flossers.
Used pla works great to take it on the road or whatever, it uses some small pins to seal it shut and not let the lid move. Enjoy, fits oral b or whatever other brand!
Water Flosser Organizer Stand with Integrated Cable Management This is a compact, functional stand designed to keep your water flosser and accessories organized. It features a stable base for the main unit, dedicated slots for two…
Used pla works great to take it on the road or whatever, it uses some small pins to seal it shut and not let the lid move. Enjoy, fits oral b or whatever other brand!
Title: The Simple Flosser - Effortless Interdental Cleaning Made Easy! Description: The Simple Flosser is the ideal solution for those seeking an effortless and effective method for cleaning interdental spaces. This innovative product is…
