1710 modeli
I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Print & acrylic draw
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Funky Chicken
Wydruk około 7,51 €–9,18 € nettoWstępna wycena jednego wariantu
This parametric vase is wider in one dimension giving it structure while keeping the profile small. Prints watertight at 0.15 quality with an 0.4 nozzle. No supports are needed and it scales up nicely.
Wydruk około 2,88 €–3,52 € nettoWstępna wycena jednego wariantu
I wanted a shelf that I could display the Funko Bitty Pops on. It also holds the Funko Bitty Towns and Rides on the top or bottom depending on how you want to use them. They can be wall mounted with command strips. You can also use them…
Wydruk około 10,92 €–13,35 € nettoWstępna wycena jednego wariantu
What I have learned thus far from using AI to design. Basic Observation: Organic Models work way better than hard surface geometric models. If you want straight lines – FORGET IT. but --Curvy amorphous, organic… YOU are good to go. Skulls…
Wydruk około 14,91 €–18,23 € nettoWstępna wycena jednego wariantu
Insert one M6 nut into the black bottom of the model and solder it into the part, push the whole bottom through the orange part and seal the black part with an orange ring to prevent the black bottom from falling out. Insert the M6x70…
Wydruk około 7,40 €–9,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print & acrylic draw
Wydruk około 2,42 €–2,95 € nettoWstępna wycena jednego wariantu
Print & acrylic draw
Wydruk około 1,23 €–1,51 € nettoWstępna wycena jednego wariantu
Print&draw
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
Print & acrylic draw
Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu
Funky 3D printed pencil holder Print in vase mode using a 0.15mm layer height or lower
Wydruk około 1,20 €–1,46 € nettoWstępna wycena jednego wariantu
Printed with Support for the tip, which is put into the Iron Man. Put some tape around the tip for a tighter fit.
Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PETG 4 perimetry 0.2mm vrstva při tisku více objektů použijte v PS volbu “dokončení individuálních objektů”, odstraní se stringy
Wydruk około 1,56 €–1,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Genghis Khan Funk@ P@p Bobblehead. zero post op. NICE.
Wydruk około 4,78 €–5,84 € nettoWstępna wycena jednego wariantu
Continuing with my Mandalorian Funko style coasters, here's Bo-Katan! The color layer changes are a little tricky here, so use the included gcode file, or refer to the uploaded picture for where to change colors. Happy printing and this…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
Zlatan Ibrahimovic Funk@ P@P Check out Cleopatra. https://www.printables.com/model/804684-cleopatra-funk-pp-bobble-head-ai
Wydruk około 11,52 €–14,08 € nettoWstępna wycena jednego wariantu
Wandhalterung für Schallplatten, auch für andere Gegenstände nutzbar. Supports needed!
Wydruk około 3,31 €–4,04 € nettoWstępna wycena jednego wariantu
This is a 2" (50.8mm) riser for a Funko POP Diecast The pegs are taller than 2" to account for the inside of the pop
Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu
Mit diesen Einsätzen bekommen stillgelegte Steckdosen einen neuen Lebenszweck: sie dienen als Befestigungspunkt, z. B. für ein kleines Brett, eine Ablage oder einen Gasanzünder. Der Teil, der in die Steckdose gesteckt wird, ist etwas…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print & acrylic paint
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
Funkamateur MiniWhip encloser to be used on a fishpole. Diameter hole for fishpole is 5.5mm Printable right up, supports are needed only for the lower parts, block te rest. I printed with PETG Desert storm matt from brand Spectrum. 0.2mm…
Wydruk około 5,12 €–6,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Do you want to display your collection, but LACK space on your standard (IKEA LACK) shelf? This add-on will allow you to present your figurines, children's shoes and other items from your collection in a non-standard way. Accessory…
Wydruk około 3,08 €–3,77 € nettoWstępna wycena jednego wariantu
Print & acrylic paint
Wydruk około 2,14 €–2,62 € nettoWstępna wycena jednego wariantu
Das Modell wird entweder als Grundmodell bestehend aus dem Gehäuseboden, dem Deckel und dem Knopf für den Resettaster und dem einem Ring gedruckt, der den Taster im Deckel hält. Das Modell für das Multifunktions Shield besteht aus dem…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
I don't always have pockets available and I wanted to have my Funkey S on hand for 1 handed play when I wanted it. So, I made a base for it to sit in (friction fit) and used an iwatch band I had laying around. I use the “lanyard” for the…
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
Just finished Bomb Rush Cyberfunk and completely fell in love with it. So I decided to make a model for fellow fans and 3D print enthusiasts! I will probably update this at some point with more accessories (Boost pack, skateboard, bike,…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
es un funko pop de una chica sujetando un balón de baloncesto, si tienes alguna duda o sugerencia, dímelo.
Wydruk około 3,90 €–4,77 € nettoWstępna wycena jednego wariantu
George Russell FUNKO POP! F1 This Funko POP inspired racing figure is designed for true motorsport fans who love to customize 🎨 The model is unpainted , so you can bring it to life with your own colors, details, and finishing style. To…
Wydruk około 7,33 €–8,96 € nettoWstępna wycena jednego wariantu
The Funkoverse™ Alice in Wonderland strategy game comes with nice figurines for Alice and the Queen, but with purely textual little cardboard tokens for their allies. These models are meant to rectify that, because fancier characters are…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Funko pop figure as famous czech rapper Yzomandias
Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu
Dies ist eine Halterung für einen Funkempfänger des oben genannten Modellles (gibt auch einBild vom Funkempfänger). Der Deckel lässt sich schieben und hat ein Loch für die Antenne, welche man optional an den Funkempfänger löten kann.…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
Die Beschreibung dieses Deckel Set richtet sich vor allem an diejenigen, die das u.a. bei Amazon erhältliche “ Brandsseller Aufbewahrungsbox Dekobox - Rattan-Optik - 3er-Set schwarz” (Link: https://amzn.to/3VxbGMG ) bereits besitzen. Ich…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Háčky na úchyt nářadí do multifukční stěny Vytvořil jsem háček do multifunkční stěny v garáži. Dá se na něj pověsit nářadí atd.. Tisknuto na Ender 3 v2 neo Creality PLA (white) Doporučuji ve sliceru otočit háček na bok , tím se sice…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Tiskárna se skládá z 2 upravených rámů z mk3 stejně jako bed. Místo lcd přijde xlcd. Budu rád za jakou koliv podporu. Pokud by vás cokoliv zaujalo neváhejte mi napsat.
Wydruk około 1,36 €–1,67 € nettoWstępna wycena jednego wariantu
Matt Foley Inspirational Speaker Funk@ P@p I liked the idea better than the Output. It is wanting.
Wydruk około 7,00 €–8,55 € nettoWstępna wycena jednego wariantu
Funk@ P@p Jesus made with LumaAI. UV displacment in Blender Fixed and prepared in MS3dbuilder. Sliced in Prusaslicer.
Wydruk około 4,90 €–5,99 € nettoWstępna wycena jednego wariantu
This is a print inspired by the funko pop figurines. It has the exact dimensions of a male funko pop, ready for your customisation. You may need to scale it up to 2700% to get a realistic size. Print Instructions: Infill: 15% Layer…
Elevate your Halloween decor or add a quirky touch to your home with this unique skeleton figure, stylishly dressed in a hoodie. This model serves as an excellent decoration piece or a fun, eye-catching print for enthusiasts. This model…
Print with supports! Also no platform is included.
Comes with 2 variants - standard or keychain Fully print in place with no brim (printers with low adhesion may require a small support under the beak only) Highly flexible but can stand on his feet
This is a print inspired by the funko pop figurines. It has the exact dimensions of a male funko pop, ready for your customisation. You may need to scale it up to 2700% to get a realistic size. I recommend printing it upside down for…
Design Concept This model draws inspiration from the iconic character of Will from the popular TV show Stranger Things, rendered in a cute, chibi-style figurine typical of Funko Pop collectibles. Purpose The model serves as a collectible…
Print with supports! Also no platform is included.
Print with supports! Also no platform is included.
Muñeco estilo funco realizado con ayuda de inteligencia artificial
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
A slightly remix of "Harry Potter Kinder Joy Shelf" by @PavelNytra_273350 Base box 4x3 and logo are merged to one file that can fit on ~245x180mm print area. Also additional wand (credits to Duffy_544591) for pencil holder etc
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
3D modeled Funko Pop–style figure of Tanjiro Kamado from Demon Slayer, with stylized details and signature outfit.
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
Hexagon shelf for large Funko Pop! Connections on every side that slip perfectly together. Design originally uploaded to Thinkgiverse by https://www.thingiverse.com/izikdal/designs , just linking here for ease
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
Bring the mighty Tairn to life with this Funko-inspired dragon figurine from Rebecca Yarros’ Fourth Wing. Designed in an adorable yet fierce style, this collectible features Tairn’s iconic dark scales, golden details, and powerful wings.…
Luigi Funko Style For best results and minimal layer lines, use a fine layer height (around 0.1–0.12 mm) and slower print speeds to capture small details—particularly in the face and hair. PLA or PETG Of course, everyone’s setup is…
Modular hex shelves to display my daughters funko pop advent calendar figures. Use supports touching buildplate. Remix of https://www.thingiverse.com/thing:3901517 Print instructions Use supports touching buildplate.
Print & acrylic draw
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
Tiskněte to hore nohama..
3D Printing Guide for Cute Anime-Style Chibi Girl Model (Optimal Settings & Tips) This guide will help you achieve the best quality when printing the Anime-Style Chibi Girl 3D model. Since this is a detailed, decorative model, following…
Suitable for Funko Pop and other figures with the height of ca. 4 cm. Simple castle themed shelf I made to house our collection of Funko Pop mini figures from the Harry Potter series, which came in Kinder Joy surprise eggs this year.…
This STL features a "Funko Pop"-style figure of the iconic superhero Iron Man, wearing his classic red and gold Mark suit. The figure showcases the characteristic large head and small body typical of Funko collectible figures. With…
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
Print & acrylic draw!
Made it two parts print. Added a neck
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
Print with supports! Also no platform is included.
A shelf for packaged Funko Pop figures. It has a cutout at the back to be able to stick the shelf to a wall.
Print with supports! Also no platform is included.
Infill: 7% Layer height: 0.16 mm Filament: works well with PLA, I haven't tried others. Supports: Yes
I wanted a display that fit the bobble head Star Wars Funko Pops. Made it themed with the back and sides. They slide together and fit really well.
Bring a playful charm to your home with this 3D printable Doggy Funko-style planter ! This model features a smooth, oversized dachshund dog head with big cartoon-style eyes, perfect for succulents, small plants, or just as a cute desk…
Hier gibt es eine neue Version für die Harry Potter Funko POP Reihe aus den Kinder Joys. Im nach gang wurde noch ein Besen erstellt der unten dran Geklebt wurde. Guten Druck
Lion King Like Simba Funko Style For best results and minimal layer lines, use a fine layer height (around 0.1–0.12 mm) and slower print speeds to capture small details—particularly in the face and hair. PLA or PETG Of course, everyone’s…
Nezuko Kamado Demon slayer Funko pop
I Remixed this model for my funkos that I don't know where to put and seeing that I had a SKADIS wall with some space I decided to Remix the Funko Pop Shelf from Mace3D and add the correct hook for the IKEA SKADIS. This solved my issue…
Mikrofonhalter für Motorola Funkgerät Feuerwehr 0,2 Layer Wall 4-5 45% Infill 4 Untere und obere Schale
1 version 1 figure POP 1 version 2 figures POP 1 élément de connexion entre les support 1 élément de fixation murale
¡Lleva a casa al adorable Groot con este modelo imprimible de Funko Pop! Inspirado en el carismático personaje de Guardianes de la Galaxia, este modelo captura la esencia encantadora y la personalidad única de Groot. Diseñado con gran…
Funko estilo pop realizado con ayuda de inteligencia artificial
Print & acrylic draw!
Shelf I made to display my sisters Funko Pop collection. Attach to the wall with strong double sided tape.
DISPLAY SYSTEM TO PLACE FUNKO POP'S ON THE WALL AND OUT OF THE WAY. CAN BE MANIPULATED IN TO SVERAL DIFERENT SHAPES. SHELVES CAN BE HUNG AS SINGLE, OR IN GROUPS. SHELVES INTERLOCK USING A SPRING LOCK BASED ON THE OpenLock TILE LOCKING…
Material: PLA+ Druckereinstellung: Layerhöhe 0,16-0,2 mm / Infill 0-100 % / Support partially Zusätzliches Material / additional material: Sechskantschraube / hexagon screw / DIN933: M4x20 / M4x35 / M4x50 mm Mutter / nut / DIN934 M4 Mein…
Universell einsetzbare Pinzette. Ohne Support schnell und einfach gedruckt. Länge ca. 140mm; Die Spitze hat ca. 3mm - also sehr präzise! Nicht vergessen: einzigartiges Design keine KI keine nachbearbeiteten Fotos, nur Originalbilder…
A Funko pop stand with the option for a colour contrasting ring with the use of PrusaSlicer's inbuilt colour changing.
Interlocking shelf system for displaying your Funkos. V1 has a screw hole, V2 has no screw hole and the inner band can cover the screws or add a secondary color. Photo shown was printed in white PLA with Glow-in-the-Dark inner rings.…
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
