65 modeli
Hello, I have Unitree Go2 Robot Dog for you. You may know it from Alza's bag. It is really fully authentic. Nice for an exhibition. I really like these movie accessories. Good luck with the printing! I used PLA/PETG as the material. You…
Wydruk około 16,93 €–20,70 € nettoWstępna wycena jednego wariantu
A holder for the WAGO221 with labels L1, L2, L3, N, and PE. The holder mounts with M5 screws. An additional model of the holder is available without labels. The Wago fits snugly, requiring a slight pry to remove. I printed at a 0.16mm…
This model includes two clips to attach it to the honeycomb. Not printed yet I'll add a photo when I do. Edit: Added a standard mount option. All credits go to zhudafa and RostaP whom did the heavy lifting.
Saw this use-case while setting up Quick-Clip system on my backpack. Those parts I tried with both PLA and PETG and both seem robust enough for my cases. Did 30% or more infill with Gyroid pattern and everything seems stable. UPD…
Was looking for rugged protective covers for Microsoft Surface Go 2 , couldn't find anything for my purpose, so had to design my own. I designed it specifically to use it with my Surface Go 2 but figured out that it fits for following…
Mount to install a Insta 360 GO2 cam on top of BetaFPV's Cetus X FPV quad drone. To be print in TPU. Keep back in place using an elastic tie.
the big disadvantage of this model is the accidental pressing of the button due to the fact that it is very sensitive and has a small stroke. The usual protective ring flew off, although it was attached. With this rounded edge, there is…
A simple Pegboard mount for the JBL Go2. Designed for a pegboard with a 25.45mm pitch, 6.0 to 6.5mm hole diameter and about 5.5mm thickness. Printed in PETG at 0.2mm layer height. Supports are needed for the 3 Pegs at the top of the model.
This is a simple Camera mount to mount the Insta360 GO2 to the BetaFPV 95x Cinewhoop V2. There hasnt been one around at the time of the GO2 release. So I created my own :) Print Suggestion: Filament: TPU 98A or 96A. TPE will also work…
Printer: Creality Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: Default Infill: 100% Filament Brand: Doesn't Matter Filament colour: As you like Filament material: TPU Notes: Lay flat on the face where the straight edge of the…
Cover for the TBS Tango2 Module Bay with simple “grip” detail. Please share a Like and Follow Me! If you remix my model please include the following in description: Author: Mr.Jib Link to author: https://www.printables.com/@Jib_88963…
Vibration isolated insta360 go 2 mount for your flywoo explorer. Also a great starting point for making your own mount remix for whatever quad you'd like, potentially. Open source web based CAD design in OnShape! I've included 0-45º tilt…
Little thing for better safety :) printed on sla with tough resin. I am not sure if the fdm printer can handle this fine
Reach me on social medias for questions, news and support [ Instagram ] [ Facebook ] [ YouTube ] If you like my work you can [ support me via ko-fi ] ------ Those are some simple camera mounts i made for my small quads. It have the same…
The Insta360 Go2 is a great camera for paragliding, as it doesn't take up much space. GoPro style camera mounts are prone to getting tangled with lines. And if that happens in flight or during launch, there's a higher risk for accidents.…
S.A.F.E. – Sensor Array For Environment (Unitree GO2) Modular Raspberry Pi 5 payload for the Unitree GO2 robot. Designed for environmental sensing and easy hardware integration. Sensor Integration HC-SR04 Ultrasonic: Front-mounted for…
WAGO221-413 holder for 2 pcs on profile 2020 We liked this holder, but it was necessary to adjust the dimensions for the 413 version. Print from ABS, ASA, PC or PA (CF)
Holder/mount for JBL Go 2 Bluetooth speaker designed for the IKEA SKÅDIS pegboard system. It securely cradles the speaker while keeping it easy to grab and put back, making it a clean, space-saving way to keep your Go 2 on a wall, desk…
Inspired by serveral Designs. This is just a simple Go2 mount for my Cinelog25. May fit other models to, due to the simple fixing.
Glue on with a strong glue like E6000 in place of the stock front and rear vents. You'll need an M4 bolt and nut for the mount. The Insta360 Go 2 mount is pretty tight. May be worth slightly upscaling it. Peanut mount is pretty good…but…
Module bay cover fits snug over empty Tango2 module bay for pin protection.
Reemplazo para tapa lateral del parlante JBL GO2, no encontré la fuente de letra de exacta, puse las mas similar, lo hice en PLA y esta configurado para imprimir boca abajo con las letras en color, impreso en Anycubic Kobra S1. Dejo…
Presents the slider for the Pioneer Wego2 console. If someone loses the original, here is the replacement. I also attach an open file in Invenor for a better match. Successful prints. Category: Music
A remix of two models which combine into a simple way to attach your camera to your RC FMS 1220mm Ranger V1 or V2. The first model is the insta360 Go2 camera mount found on Thingiverse: https://www.thingiverse.com/thing:5346685 The second…
Model is parametric in range 1 to 7, 8+ requires adjustments. Features: Integrated robust joints tabs keeping wagos in places while closing lid sleeve space wires alignment space Printing: Nozzle: 0.4 Infill: 15% 0.2 Quality Any material.
Tbs Tango2 gimbal protection
Insta360 go 2 mount for AR Wing Pro. Comes with space through centre to fill with 5p coins for CG
Mount for the Insta360 Go2 onto an Apex EVO frame Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: PhaserFPV TPU Black Category: R/C Vehicles
https://www.thingiverse.com/thing:2853261 presented the IKEA SKADIS Collection. It's a wonderful job,but its Universal Fork is not fit my Bosch Go2. I have created a remix version to fit the right size 35*45cm. And you need print a…
The problem The Pivot Stand for the insta360 go2 is one of the best mounts, but mine broke around the screw where the plastic is really thin. A new pivot stand is cheap, but since the release of the insta360 go3, this one has become…
### Update Oct 2021: New version for Caddx Peanut * (works with both!)* After getting a Peanut I redesigned the mount to support both cameras. It leaves the back exposed to support the charging-while-flying backpack. I recommend using a…
Da ich zu meinem GoXlr noch einen Midicontroler unterbringen musste, habe ich in anlehnung einer Vorlage von Thingiverse etwas neues konstruiert. Der Stand wird zweimal gedruckt und die Querverbinder dreimal. Am besten noch etwas…
You'll need to mirror one of the STLs in your slicer since the door clips are mirrored. You'll also need to scrape the rest of the broken upper clip out of the door to make room. This fits in place with a square of 3M VHB tape applied as…
to print with tpu
This a cover (hopefully block the wind noise) for Insta360 Go 2 PowerMount. You can find the design in here ->…
I wasn't happy with the GoPro style holders for the Insta360 Go2, so I mixed together the official GoPro mount with one I was already using for the 2Fiddy. Category: R/C Vehicles
This camera mount is for the ethix cinerat, to hold the Runcam orange or GoPro Session. It also has a cutout on top that fits an insta360 GO2 vertically. The standoffs are bowed and should help with jello in video. Please take note if you…
Camera mount for the drone. It is used for VR videos. Don't break the drone!
Designed for my custom frame, may fit on other Frames too (see CAD Dimensions Photo).
TPU 0.4 Nozzle No Supports Whatever infill you want Print on side so it prints as if insta360 is standing up Print Settings Supports: No Category: R/C Vehicles
I made this model in fusion 360 quickly, after I noticed that, when I'm wearing the chest pendular, the insta go2 had a little too much up tilt for me. I wanted to have the go2 recording more horizontal on my body. This model added a 20%…
Ideal material for me is Flex 98A - totaly destroy jelo effect :)
Insta360 Go2 with power adapter mount for ZOHD Dart XL. For use, you also need the HGLRC Tuning USB adapter.
This WAGO holder + case can be used to distribute from one power cable to up to 8 outputs. Using a 5 core mains cable for power supply, you can balance the power load on two phases. Ideal for devices with a high initial current (like…
These are remixes of the goober canopy mount for the Insta360go2. I worked with CiottiFPV to create multiple offsets for his "TinyLifter" concept. Category: 3D Printing
I wasn't happy with the GoPro style holders for the Insta360 Go2, so I mixed together the official GoPro mount with one I was already using for the 2Fiddy. Category: R/C Vehicles
Remix of TeachingTech left Raspberry enclosure with additional U2C and WAGO ( kl4appdrachen ) mounts. You should use 25cm right angle USB cable to connect U2C to main Raspberry board.
Detailed instructions and BOM to come Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Category: 3D Printing
I have designed the mounts so I could use 4 bolts to hold down the steppers instead of 1, the 2040 frame needs to be notched to allow sufficient adjustment for belt tension. See photos for fitment. you will need 4 x M3 x 50mm bolts for…
I printed in PETG, 15% infill, 0.2mm. Original design in OnShape, available here: https://cad.onshape.com/documents/5923a7aa25854499a2b9003d/w/69ebb3804a914ac7d29c43bc/e/c837764a323be70dbe043670
This is a TPU camera mount made for the Caddx Peanut or insta360 Go2. It fits the KayouDur frame from KayouFrames Print it like any TPU mount. Category: R/C Vehicles
Power cord cover with the SecKit logo. Printed with 0.6mm nozzle. Uses 2 t-nut to attach the frame. Print Settings Printer: Sk-Go2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: Amazon PLA purple Notes: I used purple…
Honeycomb wall holder for Bosch Go2 screwdriver and eight bits
mount for Mover GO2 remote control Category: Automotive
This is a TPU camera mount made for the Caddx Peanut or insta360 Go2. It fits the KayouLoin frame from KayouFrames Print it like any TPU mount. Category: R/C Vehicles
Printed in petg, No needs for nuts for the bltouch. Might need to redrill holes to allow gantry m3 bolts. Print Settings Printer: seckit skgo2 Rafts: No Supports: Yes Resolution: 200 Infill: 25% Triangle Filament: amazon petg white How I…
Extruder SK-GO2 carriage for Bontech LGX extruder with Mosquito hotend. This is remix of Ernest Lin's design https://github.com/SecKit/SK-Go_SK-Mini/tree/master/extruder%20carriage%20STEP%20file There are few changes to original: motor of…
Honeycomb wall holder for Bosch Go2 screwdriver and eight bits
You'll need to mirror one of the STLs in your slicer since the door clips are mirrored. You'll also need to scrape the rest of the broken upper clip out of the door to make room. This fits in place with a square of 3M VHB tape applied as…
This is a manually re-constructed version of the Unitree Go2 back cover. As i needed it as a base for one of my projects i thought it might be useful for someone else too - so here you go. IMPORTANT: I tried to reconstruct it as precise…
Re-designed back plate for the Unitree Go2 allowing the seamless integration of the Nvidia Jetson Thor compute module as a backpack. There are many great models out there allowing to mount the Jetson Thor on the Go2, but none of them try…
A very secure shell for Insta360 GO2 to be attached to a GoPro mount. It consists of two parts that are closed by a hinge. In such a way that when closing them and fixing them to a GoPro mount, it is impossible for the camera to be…
