42 modeli
What is it: It is a super slim case for the Raspberry Pi Pico W microcontroller. The case snaps together. No glue, no fasteners. The no glue part was important because at any point you may want to pop it loose of the case and put it on a…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
This is Headers Remix for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The features are : . Replacing factice screws by holes for real screws . Gaskets . Exhaust collector for driver and passenger sides Print…
This press-fit Raspberry Pi Pico case is made to work with headers, although will work fine without headers. This case was designed to be deep enough to fully protect the GPIO headers pins. There are a few variations of the top depending…
Requirements 4x standard 0.1 inch pin headers for male connectors 4x standard 0.1 inch socket header for female connectors Print with PETG for better flexibility 0.3mm nozzle or finer will give good results
This case is a remix of dimo414 's Slim Raspberry Pi Zero W2 Snap-fit Case . That was a remix of Marius ' pi zero 2 slim case , which was a remix of his previous Slim Raspberry Pi Zero W Case . We got remixes all the way down! I made the…
3 Different styles of side dump headers for the RC Everyday Rat Rod kit https://rceveryday.com/1-10-Scale-Old-2-RC-Rat-Rod-Chassis-Builders-Kit-p536847181
Case for Heltec V4 Compact, screwless enclosure for the Heltec V4 LoRa board. The lid is held in place by press-fit (friction), no screws, no threaded inserts, no additional hardware required. Compatibility Heltec WiFi LoRa 32 V4 (not…
A simple square case with a pressure fit top that still allows access to the rows of headers and their names.
This is an add-on for Exhaust Headers of the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). Be careful ; ExhaustHeader1Collector and ExhaustHeader2Collector are not the same. Print Settings 1 x ExhaustHeader1Collector :…
Designed and printed in PETG, but it is intentionally a tight fit so you may have to scale it up a bit for ABS. I am not really good with soldering, but fortunately plenty of vendors offer the Raspberry Pi Pico with pre-soldered and even…
Excellent ESP32 Devkit Case from @bkgoodman leaves pins exposed. Created something to cover those pin headers. Parametric FreeCAD project is attached. It can be used to adjust row and column counts, pin diameters and spacing. Wall…
Sourced long header pins but needed some spacers for it, so made this. Current default values assumes you are using industry standard imperial header sizing and spacing. Print instructions Unassociated tags: pin headers Category:…
Included holes for pin headers
Customizable design of my solderless wire termination with pin headers (thing: http://www.thingiverse.com/thing:1380452 ). Notice when opening Customizer: the first image is a bug (and I don't know why), but as soon as you change a…
Fits a Raspberry Pi Pico W with no headers. Lugs to attach inside, but not strictly necessary as lid is a very snug fit and will hold it in place nicely. Micro USB Hole in base and LED Hole in Lid. Test printed (in photos) with eSun PLA…
Quick edit of @Alexander_399046 's Gridfinity Bin to give 3 slots for esp32's with headers, and 5 slots without headers. Printed at .3mm in pla. Works great! Fits in tool chest thinner drawers nicely.
A mockup of the Heltec V3 board but with headers. Original model by HighDoping!
This case was designed to hold a Raspberry Pi Zero 2w and v1 camera but still allow access to the headers and all the ports because I could not find one anywhere. It should still hold an original Raspberry Pi Zero and a v1, v2, or v3…
Print without top and bottom layers, triangles infill 40%.
I use these Connector Rails for 2,6 mm busses and Dupont headers in my DIY Power Modules to be used with fischertechnik. They facilitate Dupont headers and the PTN2-10 cable shoes. For more information see…
Needed a case that did not expose the headers on my Pico W. Has a hole for the Debug connecter. Covers the header pins.
A useful little tool for Synth DIY enthusiasts! This little box allows me to convert between the five types of connectors I use the most in my shop. License: CC-BY-NC-SA 4.0. I've been getting into building DIY synthesizers recently, and…
Case for Raspberry Pi Pico 2 W (With headers). Top & bottom snaps together. Allows the BOOTSEL button to be pressed.
If you are tired to try to keep your PCB headers on place when soldering them, here you have the solution that I've designed for. This model will keep on place the headers during your soldering tasks. To be honest, for me it super useful,…
Summary Since the pins used in the original design are only available from big distributors (DigiKey, Mouser, ...) Shipping costs 20€. Stackable Pin Headers can be found much more often and are therefore more affordable. Additional Parts…
Slim Raspberry Pi Zero 2 W case with added GPIO header hole and clips for aluminum extrusions.
The bulge will need to be glued in place.
Everyones needs some hookers! Made on my Bambu P1 and AMS. Drag it in, split it, color it, assemble and print! Badaboom! SVG is raw unedited format!
Dust/Beauty cover for the bottom row header pins/plugs on the Gigabyte X870E AORUS Elite motherboard
I prefer JST connections for my electronics. But some parts arrive with presoldered pin headers. Now, instead of desoldering the pin header and solder a new JST-header, I created a fake header, which can be glued onto the pin header.…
Merlin exhaust headers with a "fishtail" ejector, as typically fitted to Spitfires (not Mustangs, Mosquitos, or Lancasters). The "engine" side is designed to go into a 5mm deep slot on the side of a 1:6 model fuselage. As such, all of the…
This is a calibration object, to help with printing header probes that requires accuracy in the z axis. This was specifically created to help calibrate my 3d printer to print this probe https://www.thingiverse.com/thing:3051216 that…
This is a sleek and functional 3D printable case designed specifically for the popular STM32F103C8T6 development board, often referred to as the “Blue Pill”. Why you need this case: Whether you're using your STM32F103C8T6 for embedded…
For Arduflyer 2.5 from RCTimer. With right angle openings for IO pins. Remix of http://www.thingiverse.com/thing:129411 This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bwWE9Au9cH3 Category: 3D Printing
Bolt it down to your saw and you always cut strait to the center of the bend.
My Feather M0 has headers on the bottom, remixed the feather box to increase the depth, screw holes and usb opening.
As an Amazon Associate I earn from qualifying purchases. I really liked the "Smallest Possible" case design created by MagnusT, but needed to modify it for my own uses. I wanted a case that would fit an esp32 cam with pin headers…
Case for the Sonocotta ESP32-HIFI case when you get a board with preinstalled female headers and build-in antenna. Just like the original its a friction fit, so no hardware required.
A case for the Atari ST SidecarTridge Multi-device V3 with a cut-out for a header-mounted Pico to show through in all its glory.
A two-part, screwless snap-fit case for a Pro Micro nRF52840 development board (nice!nano v2 compatible, SuperMini-style clones) with all header pins soldered on: both long rows and the 3 extra pins (P1.01 / P1.02 / P1.07) at the end of…
This case was designed to hold a Raspberry Pi Zero 2w and v1 camera but still allow access to the headers and all the ports because I could not find one anywhere. It should still hold an original Raspberry Pi Zero and a v1, v2, or v3…
My Feather M0 has headers on the bottom, remixed the feather box to increase the depth, screw holes and usb opening.
![Pi PICO-W Slim Case [SNAPS TOGETHER - no glue] (with and without headers)](https://media.printables.com/media/prints/385457/images/3229748_ab46d5e6-982d-4b10-a173-4fe5264d163a/2.png)
