532 modeli
Español: Plano topográfico de las islas Malvinas altura de capa 0.1 nozzle 0.4 recuento de pared :3 capas de piso :2 capa de techo :3 temperatura de cama:60° nozzle temperatura : 205° filamento :pla escala: 50% impresora : artillery…
Wydruk około 6,51 €–7,96 € nettoWstępna wycena jednego wariantu
Hoa Hakananai'a is a moai (Easter Island statue) housed in the British Museum in London. Removed from 'Orongo, Rapa Nui (Easter Island) November 1868 by the crew of the British ship HMS Topaze. Though relatively small at 2.4 meters, it is…
Wydruk około 3,01 €–3,68 € nettoWstępna wycena jednego wariantu
Island Surf Girl
Wydruk około 14,61 €–17,85 € nettoWstępna wycena jednego wariantu
Created from a GIS downloaded model and scaled down for 3D print
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Removed the rest of continental Europe and left the Island of Ireland on its own. Added multiple colour changes to make the model pop.
Wydruk około 4,28 €–5,23 € nettoWstępna wycena jednego wariantu
Town token in Spirit Island board game.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
This model was created from a single photo taken of the Block Island ferry this summer, using Rodin ( https://hyperhuman.deemos.com/rodin). The ferry runs from the fishing village of Galilee in Narragansett, Rhode Island to Block Island.
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
Source of the original Image this 3D-Model is based on “Mrson Graphic”'s Vector-Image https://de.vecteezy.com/vektorkunst/2180679-pferd-logo-vorlage-vektor-symbol
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This a model for the state flag of Rhode Island. No filament switcher is required for this model. Using manual layer change switching start with White, switch to Yellow at layer 16 then Blue at 19 (for 0.2mm layer height). See the…
Wydruk około 3,46 €–4,23 € nettoWstępna wycena jednego wariantu
Invisible Island is a strategic board game for 2-4 players, where the objective is to acquire totems and open the gate to Atlantis, all while blindly navigating a maze full of hidden corners. The game was created by Karolina Glanowska, a…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
This is my detailed print of the original STL from "et-huang" on Thingiverse. I did a lot of test to achieve this (a little dirty and dusty), print. This is also my very first print published on this community.
This insert was designed to hold all available Spirit Island content with quality sleeved cards in the Base Game and Jagged Earth box. The insert is optimized for multi-person play, as trays such as energy, elements and other tokens are…
This 3D-printable Moai head brings a touch of ancient mystery to your shelf, desk, or planter. I sculpted this version with simplified angles and a stylized silhouette to give it a clean, print-friendly profile while preserving the iconic…
Bored of picking your own nose. How about picking someone else's? This is your chance! This stylish tissue box cover is not only convenient, but also very satisfying to use. It fits an 11.5cm x 23cm x 7cm big tissue box and is usable in…
Update December 26, 2024 : I have received multiple reports that recent printings of the base game box are slightly smaller than the copy I used to create the original version of this insert. I created a new version that you can print if…
A skull themed island. Easy to print, no supports required at all. The small bridge is only part that doesn't take well to scaling down, it might not print at all. Otherwise this is printable in small scale and unpainted looks kinda cool…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint “...and the forces of darkness will applaud me as I STRIDE through the gates of hell carrying…
A simple island style boat/ canoe with rounded sides and flat bottom. No support needed.
A collection of models to test support capabilities on your printer
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Guybrush Ulysses Threepwood is the main character of the Monkey Island series of computer…
*** DISCLAIMERS: This is our first 3D print, and we might not always know what the best 3D printing practices are. If you are more experienced, feel free to adjust the files if needed. Some components can be a bit snug. It might be a good…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint LeChuck is a fictional character in the Monkey Island series of graphic adventure games.…
This model is compatible with the lego system.
This is based on the island from The Legend of Zelda: Link's Awakening, a game that is getting a remake soon. Inspiration and idea for this project came from Miniworld, who graciously let me realise it as I got excited about it. Whole…
We're heading over to Easter Island to see the Moai heads with this scenic tile. I suggest printing a few and having marbles run through them while they visit Easter Island. Single piece, change filament around layer 48 if you want to…
Ferries are great to play with because they combine 3 vehicles which are used by children to play with. Ships, cars and trains can be combined. I have chosen the Fehmarn as a model for my ferry. From 1927 Fehmarn connected the island of…
Defense Tray This is a three-part tray, containing the following parts: Defense Tray - Base Defense Tray - Insert Defense Tray - Lid The insert is removable, and holds the defense tokens during gameplay. Defense Tokens I have included…
For ages I've wondered why the blight tokens in Spirit Island are so different to the icons used to represent it. I designed these to be more accurate to the symbols used on the cards and the boards, as well as being much easier to pick…
Recommend printing with fuzzy skin with 15% infill. No supports needed!
Fits all the components of Spirit Island + Branch & Claw + Jagged Earth + Feather & Flame in a single box, with minimal lid lift (9.6mm), for sleeved cards. I only left the rulebooks and helper cards out - everything else is in the box.
This Lighthouse is based on the https://www.thingiverse.com/thing:2687021 model and inspired on a real and beautiful lighthouse in Nova Scotia, Canada. I remixed the original model by splitting in several parts so it can be printed in…
Have you ever wanted to have your own piece of the BFDI world? Well, NOW YOU CAN, with this brand new 3d print of the win-token from BFDI! No supports needed! So yeah print now!
A meeple of an Plateosaurus dinosaur for the board game Dinosaur Island. Print Settings Printer Brand: Printrbot Printer: Play Rafts: No Supports: No Resolution: 0.2 Infill: 20% Category: Games
Print with layer height 0.1mm (or even lower for higher "resolution") In slicer move the model -0.1 or 0.2 below print surface to see the relief.
Hawaii, USA (HI) Southeastern Islands Coastline Topographic Map Hawaii, USA Southeastern Islands mountains and coastlines in a dual color topographic and hydrographic map! Part of the USA of Plastic topographic map collection. Unlike the…
Skull Island Dice Tower You can throw your dices into the vulcano and then they will come out from the left or from the right cave. Would be happy to see your makes!
Welcome to Rapa Nui! This model was created by MiniWorld3D member Artemio García (@artemiogj) . Easter Island , a Chilean territory, is a remote volcanic island in Polynesia. Its native name is Rapa Nui . It’s famed for archaeological…
Moai head on easter island , with base published on Thingiverse : https://www.thingiverse.com/thing:5167875 Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament brand: ARIANEPLAST Filament color: skin Filament…
UPDATE 11/6/2024 - Added island board overlays These are overlays designed to fit the player boards and three island boards (Emerald, Gold, and Pearl) for the game Pirates of Maracaibo . These are designed to fit snugly over the boards to…
I took some existing designs from here and made a few customizations to turn them in game pieces for my Fireball Island Game. The ones that came with it are a little flimsy on the bases so I thought these would work a little better. Also,…
Moai statue from Easter Island, I designed it to have a little texure and to be realistic enjoy. You can safely upscale.
Rhode Island, USA (RI) Topographic Relief Map with Rivers and Coastal Waters Rhode Island, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…
If bees fall into your paddling pool then this raft provides a place to climb on and dry before flying off. Printed in PETG. A modifier is used to remove the top and bottom layer in the center section, generating the pattern. 10% infill…
You're on your own for powering it... Category: Hobby
What is it? This is our newest and most intricate model yet. This Moai statue doubles as a glasses and headphones/headset stand. Where else can you access this model and others? This model is also available on our Patreon as well as many…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Replacement treasure figurines for the game Forbidden Island: Statue of the Wind Crystal of Fire Ocean's Chalice Includes 3MF for Bambu Studio
There is a new version for this insert, that includes Nature Incarnate. It can be found here . You can still use this one if you want. This insert was designed to hold all available spirit island content up to jagged earth (base game,…
This is my custom spirit island organizer I designed and printed myself. It can hold all currently released content (Base game, Branch and Claw, Feather and Flame, Jagged Earth, Horizons of Spirit Island spirits, and Nature Incarnate) in…
I downloaded a 3d scan of a Moai and I made a block, then used the Moai to form a Moai shaped negative. Print with bottom down. use 2 perimeters so its sealed up. 2% infill and 2 layers top and bottom so the print can be ripped and cut…
I have been reluctant to design an insert with Nature Incarnate coming out and future expansions planned beyond that. If it's just going to be out of date in a year or two, why print one? I don't want to have to design and reprint an…
Box Insert for Survive: Escape from Atlantis! aka The Island and it's expansion (5-6 players + dolphins / octopus / blue dice) Made to perfectly fit in the original box insert. You need to print one of each file, except you need 3 times…
An island that takes advantage of your printer's bridging abilities so that it can be printed without supports. The island can hold its own weight and a lot more, so you don't need to worry about it falling anytime soon uwu.
A remix of Daniel Cox's amazing upright accurate blight tokens. Designed to stand upright, both pieces should be printed flat on the print bed. My remix provides a tighter tolerance and easier long term assembly. The base of the upright…
Print with layer height 0.1mm (or even lower for higher "resolution")
These are files for the ear gear of some of the straw hats on Egghead Island. Models for a single left ear (Luffy, Sanji, Robin, Jinbei), Nami's headphone style, and Usopp's Headphone style are in this. Just like some of the old walkman…
A friend wanted me to print him a dice tower, and after he searched for a while he found this. But there were some problems, the model was very corrupted, and the bottom was uneven so you could not even print it. I fixed all those problem…
3D map of Madeira island Category: Art
230x112x30mm but you can scale it, have a lot of detail use PLA or other filament easy print. Down Z 1mm to quit the platform like the picture.
This is an Easter Island Moai statue designed to use as a decorative pedestal. Can be scaled up for even greater Moainess... This is based on the excellent Moai print designed by cerberus333, ( https://www.thingiverse.com/thing:1559944 ).…
This piece is designed to provide turtles with a dry area where they can sunbathe as well as a dark area where they can take refuge. Additionally, it is designed with a central hole where coconut fiber soil can be introduced to place a…
A simple color change after the base makes for cool results. Elevation data obtained here . Created using Qgis and HGT2STL .
Edit: 4/11/26: Added some more photos and expanded some pieces below Edit: 11/15/25: Added the apocrypha spirits Edit 1/18/24: Added all Horizons spirits (see bottom of the files list), along with a revised version of Trickster that…
A Jibbit for standard Croc hole of a Moai (Easter Egg Island) Head made from a bust I for from the attributed model. It is very funny and prints well, but does need support. Works great in a variety of colors, even GLOW IN THE DARK. The…
Gameboard Meeples for The Island / Survive
A simple design in FreeCad-19. If you are a novice to FreeCad, load the file and take it apart to see how it is constructed. If an expert, you already know. The print file is for a MK3S in PETG. Let the print cool completely before…
This model is compatible with the lego system.
A Flexi Octopus with an Easter Island head!
This insert fits all content from Spirit Island, Branch & Claw, Jagged Earth, Feather & Flame (Promo Pack 1 and Promo Pack 2), Horizons of Spirit Island, and Nature Incarnate in the original Spirit Island box, with no lid lift! It's a…
Mantic Games have made their 3D printable island terrain available in their MMF Campaign of 3D printed models. I looked at the pictures and was underwhelmed at what they would look like, so I started designing my own by looking at the…
Bring an American icon to life with this circular topographic map of Liberty Island , home to the Statue of Liberty. This model features realistic elevation details of the island and surrounding water, perfect for educational projects,…
Easy 5 minute print!
Mantic Games have made their 3D printable island terrain available in their MMF Campaign of 3D printed models. I looked at the pictures and was underwhelmed at what they would look like, so I started designing my own by looking at the…
Print Settings: (scaled to 150%) Resolution: .12mm Infill: 20% Walls: 3 Material: PLA Supports: No Printed on: Creality CR-10
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Replacement bridges for the boardgame Fireball Island (old edition) Print Settings Printer: DiscoEasy 200 Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Notes: Print the bridges upside down with support. The V shape bridge require…
Railroad Island - Mini Train Diorama 2025 was the year of the “Mini Train,” which is why I saved something special for the end of the year. In Railroad Island , the concept of inside and outside is slightly reversed. On the island, the…
Disclaimer : This model involves AI-assisted generation and has been manually processed and optimized for 3D printing. The mesh is verified to be watertight and error-free. 💙 Enjoying the Freebies? I love bringing these concepts to life…
Intended to replace the spirit island blight tokens, matches the icons from the game. Works best with a 0.25mm nozzle, colour change and ironing on the topmost layer.
A meeple of an Dilophosaurus dinosaur for the board game Dinosaur Island. Print Settings Printer Brand: Printrbot Printer: Play Rafts: No Supports: No Category: Games
Print with layer height 0.1mm (or even lower for higher "resolution") In slicer move the model -0.1 or 0.2 below print surface to see the relief.
I got tired of using d6's to try and track my elements in Spirit Island so I decided to make this basic tracker that would allow me to just slide the element markers along the tracks. I wanted something relatively small and compact that I…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Just a fun little remix of the Moai (Easter Island statue by ET-Huang on Thingiverse) (I got the idea from another Printables design) that is made to hold a small remote controller such as the Amazon Fire Stick or Roku controllers. Should…
Print with layer height 0.1mm (or even lower for higher "resolution") In slicer move the model -0.1 or 0.2 below print surface to see the relief.
This model is compatible with the lego system.
Checked all of the Internet for suitable models to replace the original player spirit presence tokens. Maybe this will help you too. Printed all of them with 0.12 resolution. 13 tokens for each player. Printed for myself with this scale…
This is a cross on a mound for the "Cursed Island" scenario (Scenario 2) of the Robinson Crusoe board game. Five crosses are needed for the game. Edit: Uploaded a new version of the .STL file to correct for manifold errors. (2/25/24)…
Two versions of a meeple of an Mussaurus dinosaur for the board game Dinosaur Island. Print Settings Printer Brand: Printrbot Printer: Play Rafts: No Supports: No Category: Games
Slightly altered fear tray from Leon_H to fit in the Spirit Island Insert by LawMoney. No lid.
Volcano Palm Canary Island 234x150x48mm You can down the position Z -1mm in prusa slicer before print to cut the stand like the picture.
This is a set of pieces that can be used to recreate the Islander, King Kahuka figure at 500% scale. This figure was released in 1994 and appeared in 2 sets from 1994 - 2001. All of the stl files needed to create this have been included…
A meeple of an Pachycephalosaurus dinosaur for the board game Dinosaur Island. Print Settings Printer Brand: Printrbot Printer: Play Rafts: No Supports: No Resolution: 0.2 Infill: 20% Category: Games
This is a filament painting of a beautiful island at sunset. It was made by using Midjourney. Printed at 119x200 @ 2.88mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PrintBed Black…
I used this scan by The British Museum https://sketchfab.com/models/752e69d34933438d8230ac829d22300e # loaded it into Blender and use the texture to add some details by displacing the vertices. It may not be 100% accurate but adds detail…
Fantasy Island - Mr. Roarke (Ricardo Montalbán) & Tattoo (Hervé Villechaize) - 1977-1984 3D printable model.
![Moai statue from Easter Island [Controller Remix]](https://media.printables.com/media/prints/314081/images/2723357_cbffdd7d-8b03-4e25-9182-ac9d71bc122d/capture.png)
