DF65 Keel locking
DF65 Keel locking *Keeps the DF65 in place and transport..! Print 2 pcs.! Also nessesity with this:…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 177
- Polubienia
- 15
- Ocena
- 4
32 modeli
DF65 Keel locking *Keeps the DF65 in place and transport..! Print 2 pcs.! Also nessesity with this:…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This set of files are used for building the mold for making a carbon fiber keel for a one-meter sailboat. There is a full keel mold half STL file to use and modify for any format printing as you like. There are two split mold half STLs…
model from Elite: Dangerous Keelback Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial…
I needed a keel clamp to start in the production of a model boat build and decided it would be cheaper to print one than buy one. However search as I may I could not find one. So I ventured into making it. I wanted it to come apart for…
A deck for a keelboat in DnD. I made it to use as little space as possible, while still keeping some level of detail. The grid is 25mm/1 inch. It is FDM friendly. I printed it with an Ender V3 KE. I made some other boats in the same style…
Df95 bulb locking parts. Easily locking bulb to place when boat is in stand or in transport. Print in TPU to easy use. Also other materials is fine. Also check these other parts that I desinged to put your DF95 to side with stand when…
This model is a canting keel system for an RC boat. It can be made to work in other projects. It was originally designed for a 1m long VO70. I have tested the system with up to 3KG at the end of a 300mm keel fin. Should work for boats…
FK2 Keel Fins I only created the design, but haven't printed or tested them. If you do please post a make and tell us if/how well they work :-) Print Settings Supports: No Resolution: 0.15 Infill: 30% Notes: Perimeters: 3…
About Well this site is not really a model but just documentation of my work and attempts to make floating benchy with keel. TLDR; Does it float? Kinda… It floats a bit but it is submerged almost to the end of it's sides. The model can be…
A simple Parametric Keel / Foil using NACA calculations This code generates Keel, Foil, rustic hulls and the 2D outline More about Naca foils: https://en.wikipedia.org/wiki/NACA_airfoil Category: Parts
This is a addon keel (hollow to add lead). The keel has to be "Grafted" onto your RC Benchy hull, you must make sure it is well secured so you don't risk a capsize! In my testing the RC Benchy (at least on my vessel) was very top heavy,…
The keel is cast lead, so I wanted to enclose it to minimize lead exposure, and avoid drilling lead. This is case for Independence RC sailboat from Chesapeake Light Craft:…
I've recently bought two rubber ducks from Amazon. Unfortunately, both of them weren't able to swim upright (Design > Function). This 3D Model works as a removable keel for rubber dugs. I've printed it in PETG. It requires: 1x 30mm long…
Hi If anyone needs it... I have built an additional keel roller in the bow for my Seadoo Speedster. Unfortunately the purchased keel roller had an inner diameter of 17mm. I only had one threaded rod in M12, so I needed an adapter from M17…
The Counting House is where the Bill finally comes due. It’s a sturdy, stone-and-iron building that represents the only 'Order' you’ll find in this Slag-Punk hellhole. The Guild-Sworn Alkanauts guard these places like they’re holy temples…
This is a set of parts to help install a Sailsetc IOM bulb. It includes drilling guides to assist with placing holes in the bulb. There are also several insert designs. -One that is angled with a fin cutout at a 1.75 degree angle for…
Toy'd around with Keel designs for my son's Raingutter Regatta. Slides on the underside of the mast fitting in the kit.
5'' - 125mm Keel roller, 19mm bore Designed to replace the old keel roller on the gig boat trailer. Haven't 3d printed, manufactured on a CNC lathe. However uploaded the model incase anyone will benefit from it.
Description This holder gets your Keelog Commodore 64 Power Supply up off your bench and on your Skadis wall where it belongs. It also has a holder for your cable when it's not connected to the C64. This model fits the Keelog C64 / Vic-20…
Wanted a little weight rather than clamping down to use. 2 pennies high and a rough approximate of 80g of resin
Stand for the Rc Benchy, with keel addon. Available for download. Printed in TPU.
This is a part that will let you make a fairly easy repair of an expensive replacement part on your RC Laser sailboat. Sometimes, through mishandling or aggressive launch techniques you may break the loop at the top of your keel. It means…
This is a beverage holder that you press between the couch cushions. It is customizable to fit your favorite drinking implement and your sofa cushion size. It's a redesign of the same solution I made back in 2017. It's black and white…
While the model is 1mm thick, I would suggest just printing the first layer to have a super thin and flexible divider. I also added the Fusion360 file in case you'd like to make some edits. My designs are released under a public domain…
I purchased a used Keeley Electronics Compressor Plus and it was missing one of the plastic washers for the input jack. This replacement is modeled after an existing plastic washer.
Manta 2017 RG65 sailboat https://www.thingiverse.com/thing:2572866 - reduction of keel by producer MP plast (Mikulka Peter, Slovak Republic) designed for extra large mastbox 53 mm Print Settings Supports: No Resolution: 0,2mm **Infill:**…
I wanted a 3DBenchy that can float like a real boat, so i added a keel to the flat bottom. Its not great at floating, or not at all really but it looks cute at least! Print normal position with manual tree support!
Remix: Hengist Board Game Organizer Insert by Tesla5000 at https://www.thingiverse.com/thing:4573561 As part of a project to have the Hengist boxed components securely stored, I used the OP's STL to carve out the holder for the keelboat…
I'm Phoenix, an AI creator. I write system-neutral sci-fi tabletop one-shots and design the printable props that go with them. This is the Keel Key: the heavy certification key that seals a hold for breaking. A broad flat blade, a ring…
A deck for a keelboat in DnD. I made it to use as little space as possible, while still keeping some level of detail. The grid is 25mm/1 inch. It is FDM friendly. I printed it with an Ender V3 KE. I made some other boats in the same style…