22 442 modeli
UPDATE 3.1.2023: added V2 version with different inner shaping → same external size & characteristics, quicker print Info: 🟠 round edge → longer edge → scraper lasts longer then other spatula types scrapers if it is less sharp on one…
Two versions of the a display shelf that have customizable “grills” (or support walls). Notes: If printing this on a Prusa MK3S+, then the .stl files MUST BE SCALED to 85%. The grills were designed to snap in place without the need of…
First layer 60x60 mm square with 0.2 mm height 100x100 mm square https://www.prusaprinters.org/prints/10876-first-layer-test-100x100-mm-square Print instructions First gcode: PLA Second gcode: PETG
Update 18. 4. 2023: added 68x44mm card version (print big wheel 2x - there is not middle one). I don't have small cards and confirmation it works fine - please see discussion)…
First layer 100x100 mm square with 0.2 mm height 60x60 mm square https://www.prusaprinters.org/prints/9838-first-layer-test-60x60-mm-square
These two models can be combined to make as large or as small as a display area as you need. Both being based on the same hexagon base, they fit together perfectly. Print as many as you like and display all of your awesome prints and/or…
I don't have the space to stand the PS5 vertically, and I wasn't happy with the console's shakiness without some stabilizing shims. I couldn't find anything for the PS5 Digital Edition, so I made this remix. The two stands are radially…
It seems like a lot of folks on reddit have questions about getting their first layer height properly calibrated. A big part of the problem I think is that the prusa first layer file only has one little square at one location. So I made…
This model is obsolete by my Playing Card Shuffler v3 https://www.printables.com/cs/model/427943-playing-card-shuffler-v3 ============================================================= Terraforming Mars board game has a lot of cards to…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
This is a two handed sword for Dummy 13 inspired by the Dragon Slayer sword from Berserk. It is about 140x16mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out MattoDesign's…
After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Christmas bauble display stand. UPDATE - I have redesigned the tree and base so that they slot together better Easy and quick to print with no supports Pictured with a 6cm bauble but can easily be scaled up or down. Let me know in the…
Hello There I made a minimalistik version of my horizontal stand. I was inspired by Jon May and his digital stand. This version uses 50% less Material and has a little better fit. I hope you like this Version as well and post a make or a…
Stormtooper First Order The Force Aweakens helm weareble the 3mf files are prepared for multicolorprint the holder for the helmet inlays can be deleted in prusaslicer or windows 3d builder same for the speakermounts for the background…
This is a Hot Wheels / Matchbox 1:64 scale model of a 4-post car lift for displaying different size diecast cars. This is a remix of EG3Dprinting's 1:24 scale for Hot Wheels 1:64 scale. These snap together so you don't have to worry about…
This is yet another playing card box. It's a simple model, but quite functional. In addition to providing a nice place to store cards, the base makes a great draw pile holder, and the top makes a great discard pile holder. The…
The zero play guide bar system is a huge benefit for anyone making and using jigs in a climate where conventional wood guide bars will expand and contract. I will use this with my table saw miter slot but you may find it useful with your…
I made this model based on my fiancee's ACNH house. I scaled it to fill a i3, but printed it myself at 50% scale. The only issue with that size was the door nob breaking off. Broken into different parts so they can be printed in different…
Show-off your vinyl cover and always remember what's on your table with this “ Now Playing ” record stand. Place it on a flat surface and lean your record against the wall or use the integrated holes to mount the stand on the wall.…
The provided part is the official MINI Display Case modded with an integrated USB port. I tried to implement the new feature in the already present design language from Prusa. The mod uses the latest R2 Version of the model. (R8 for the…
This print is useful to increase aiming accuracy for people in certain games. I personally needed that in Call of Duty Modern Warfare 2 Multiplayer mode. When you play without an extender, you can easily realize that sensitive aiming is…
I remixed the model to have the inner dimensions of 64.1 x 90 x 19.8 mm, which perfectly fits my set of French-suited playing cards, which should be the standard size. I did this because for me, the original was a little bit too large to…
Prusa Mini LCD backcover Print on it's flat face with supports Installation: First, unplug the LCD display cable on the back of the PCB. Then remove the 4 m3 screws holding the PCB in place, and slide the printed cover panel in. Reinstall…
An elegant box for 2 decks of playing cards. You can print with 2 colors like me. Card hole sizes : (but of course, you can scale to what you need) Height: 87.6 mm Width: 62.6 mm Depth: 19 mm
Update: Added "no design" version of the box A simple box for storing Bicycle playing cards. My print settings: Resolution: 0.2mm Infill: 20% No supports needed I printed this using Devil Design Black PETG (I also attached the gcode…
Change the plastic after a pause or with the help of a plug-in in the slicer.
This is a generic card box based on the rugged box by Whity. As the generic cards have different dimensions compared to UNO cards, they did not fit into the UNO box . The box is designed for cards with a dimension of 91mm x 59mm and a…
Simple circular holder - fits most challenge coins. Quick print, no supports. Small footprint.
You might also like: https://www.printables.com/model/280185-design-reference-radius-ruler-innerouter-1-to-12mm In the computer everything looks huge, but in reality 1mm could be enough or may be too flimsy depending on what you’re trying…
Remixed version of Cosplay Calipers. What’s it for? When making cosplay/costume items, proper fitment is important! These calipers will help. They’re used to measure body parts, so you can accurately fine-tune wearable pieces you’re…
Suitable for Funko Pop and other figures with the height of ca. 4 cm. Simple castle themed shelf I made to house our collection of Funko Pop mini figures from the Harry Potter series, which came in Kinder Joy surprise eggs this year.…
I really liked the concept of the original that can be found here: https://www.printables.com/model/362095-catan-card-holder-v1 However, it was too small for the version of Catan cards I have. So this is a scaled up version to fit cards…
Hello fellow makers, I assembled the Lego model of the dune ornithopter as soon as it arrived, and realized quickly that it is too big to stand on top of my IKEA Kallax shelf with the landing gear down. Although a beautiful pose, I wanted…
A holder for playing cards I made so my kids could play with us without showing everyone their cards.
The Ultimative Filament Drybox Introduction So... I saw those filament dryboxes. Of course I'd wanted to design one by myself so badly… And here it is! Let me introduce an overengineered but cool looking drybox spool stand! Does it print…
This is a deck of cards that is completely usable! (the gcode is for one card)
This is an aid to keep your Playing Cards in place if you are struggling with it a little bit. I made it for my daughter, but it's also perfect for Seniors or disabled Persons. I recommend to print these two parts separately, because you…
Make your collection visible New version of TCG display is available collection https://www.printables.com/model/1490952-multiple-tcg-sports-cards-wall-holder-and-display PSA graded TCG spots cards wall holder and display frame.
I wanted to create a new display stand for my 2022 Kenobi lightsaber model and came up with this design. It's simple yet elegant in a Feng Shui-ish way. The three parts can be printed without support and snap together (however a bit of…
A nice case for your 7" Raspberry Pi Touch Display 2 (https://www.raspberrypi.com/products/touch-display-2/ ) and a Raspberry Pi. Features easy access to the USB and Ethernet ports. Designed to use the M2.5 x 6mm screws included with the…
This is a case with snap-on lid for a single deck of standard size playing cards. It is the same design as my other two deck model, just reduced in height for single deck: Playing Card Holder for 2 Stacked Decks Printing Tips This is a…
This is a simple deck holder for your playing cards. There are several sizes included: Poker sized (63.5mm x 88.9mm / 2.5" x 3.5"), single deck Poker sized (63.5mm x 88.9mm / 2.5" x 3.5") double deck Bridge sized (57mm x 88.8mm / 2.25" x…
Case for Raspberry Pi Touch Display 2 with housings for the Raspberry Pi 3 (B/B+), 4 and 5. Updates 2025-08-11: Various models revised, the thread for the screw connection between the display case and the stands is M2.5 and not M3.…
DualShock 4 (PlayStation 4 Controller) Holder for the IKEA SKADIS pegboard system based on the wonderful Xbox Controller Holder made by @LayerCake who helpfully shared their Fusion 360 source files. Thanks to Andreas on GrabCAD for…
Tabletop or shelf display for your hockey pucks. Designed to showcase the puck upright and with as little distraction as possible Should be ok to print with as little as 5% gyroid infill. No supports necessary.
Simple yet very effective display stand for tech decks. Makes a great present. If you plan to hang it on the wall I recommend using 3m command strips. If you plan to stand it up I recommend adding a stop to the print script right before…
Cookie cutters for clay jewellery making that shape and cut clay into consistent and intricate designs, allowing for the creation of professional-quality pendants, earrings, and charms. These are super tiny cutters, the smallest ones are…
There is a new and improved version, wich fixes the issue of peg breakage: https://www.printables.com/model/531140-improved-cat-playing-board-pegs This game board for cats is a great way to keep cats busy. Just print 4 oft the stl model…
A simple stand for the (now old) Dualshock3 controllers from the PS3 era. I kept tolerances on the larger side, so it is more forgiving regarding exact placement on the stand for the price of a looser fit. I have only checked controller…
I'm not 100% sure which Gopros and Cases fits. I only tested it with the Gopro 10. Fits only the normal lens, not the Max Lens Mod. Changes to v3: Since some have complained about the somewhat tight fit, I have added three different…
“ The interior of the cabin is almost entirely bare. The air is stale and musty and the floor and walls are painted in a fine layer of dust. The only furniture of note is a plain wooden table. Perched on that table is a pristine blade.…
I am including the F3D so you can scale the size of the inlay, but I made one small and one large that should cover most sizes of inlays.
Needed a hard case for playing cards that would protect cards from damage better than the cardboard box that cards are stored in. Prints with NO SUPPORT and the lid easily snaps on the box in PLA. Let me know if you try other materials.…
v2 of the mount, very easy and fast to install with 8 large zip ties and 4 pcs M6 x25 screws the Logitech G29 pedal to Playseat challenge seat Also working with Thrustmaster t300 RS Print instructions PETG, print 2 times the G code or 4…
UPDATE Added a slot in the top half for Raspberry Pi Camera module https://youtu.be/lVM0vg\_LYkY Learning Guide: https://learn.adafruit.com/3-dot-5-pitft-octoprint-rig/overview OctoPrint & Raspberry Pi This project adds a touch screen…
This Time Circuits Display has been meticulously reproduced to be as accurate as possible to the movie. Once assembled with electronics, everything sounds and functions just like in Back to the Future. The "Present Time" is also a real…
If you are willing to take more time and really dial in your Z heights, please check out my new DETAILED first layer calibration for Revo Six (or any 0.25, 0.4, 0.6, 0.8mm) nozzles . If you simply want a fast way to set or confirm your Z…
Kitchen Play + Halloween? YES! 🧙♀🔮 🐈⬛ 🌙🪄 I designed a 12-piece toy set to play Witch's Kitchen: brewing magic potions, combining ingredients and crafting spells! All parts print easily without supports Assemble without glue And can easily…
Player board for the Dune Imperium board game inspired by the Shai Hulud mural from the movie. Presented are two 3d models, the smaller one is perfectly sized for the Prusa mini which I own, and the bigger one with extra spaces for the…
ITA Un semplice porta carte da gioco multi-livello per facilitare il gioco ai bambini o chi ha disabilità motorie. ENG A simple multi-level playing card holder to make playing easier for children or those with motor disabilities.
Simple clamp with decorative low-poly inlay. Single or dual color options.
There's a positive and negative of the pattern, so one stamps the bricks, the other the grout. One gives an outset look, the other makes them look sunken. I made these to stamp oven hardening clay.
Anycubic Kobra - kryt na display ( display cover ).
English A school desk in Playmobil style. Printing guide Printable without supports with default settings. My own settings are visible in the project file (3 tables were printed in the project). The project file is ment as an example.…
Bigger base for more fun Pack of 21 tetris cube shapes New tetris cube shapes for off-axis play Bigger base optimized for Prusa MINI (90% scale) More shapes, more fun
The most meticulously organized Lego Star Wars collection A complete list of 55 Star wars factions available to download: At Attin Black Sun Bondsman's Guild/Bounty Hunters Churches of the Force CIS Separatists Clan Djarin Clan Fett…
I had trouble stuffing the cable Prusa display ribbon cable in the 30mm extrusion during assembly. I thought up a ribbon cable holder that fit the extrusion. So I made one as my first test of Atom3D and Prusa design to print process. Made…
A display stand for your Fanatec Formula V2 or V2.5 wheel. No supports. Printed in Galaxy Black. Can also be printed on a Prusa Mini.
hinged playing cards case, designed for standard cards(58mm x 88mm) no support needed print in place
For best result I recommend 1 perimeter and 0.2 layer height with variable height around the text, so after color change there are at least two new layers. Also is good to use slow speed for perimeters to make text sharp.
Swissphone Boss Meldeempfänger Clip.
My kid broke off the first mirror within 5 minutes from opening the present. Luckily I got a Prusa Mini+ from Sandy Claws the very same Yule! Measured the original mirror with calipers, modelled in Rhino 3D. Same model for beetle and…
3d printable Playing Cards (52 card English Deck) Print instructions How to print these cards .3mf provided for both XL 5 head and MMU3. 52 cards divided into several print plates by suit and groups of rank. Each card is sliced from 3…
Place a rubber mat behinde the mount and under the hooks. Then the Display is secured from scratches and the mount is not moving. Take superglue to put the two models together.
Display the puck not the holder. This low-profile holder is perfect for mounting hockey pucks to walls or plaques. Features countersunk screw holes for mounting. Designed for Multi-Material printing but this could also be printed with one…
They asked me if i can make a playground for the Sylvanian family. This was a quick build in Tinkercad, and printed fine, the bridges could me better. i have still to print a temp tower ;) Print instructions i have printed this on the…
I made this because my mother was reminiscing one night about one of these vintage plastic molded playing card trays. Instead of heading to ebay I said I could design one for her. This one is designed to be used with 2 decks of cards (and…
If you simply want a fast way to set or confirm your Z heights, try my QUICK first layer calibration for Revo Six (or any 0.25, 0.4, 0.6, 0.8mm) nozzles . Use these DETAILED files if you are willing to take more time and really dial in…
A token for 1st player in different height for color change.
Thanks to x13a for the original model. Mainly i remixed the model to add 4 microSD Slots and to get the GoPro to fit in with this lens cap on.
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE PLAY BOY SMOKING KEYRING This 3D keychain is a unique and modern design that allows you to carry your keys safely and stylishly. With a minimalist and elegant design, this keychain is…
I wanted a simple, secure, strong way to mount my Lego Saturn 5 rocket vertically on my wall. I whipped up this very simple set of models, which came right off the printer (no supports) nd on to the wall. This model had been on my wall…
Simple wall mount for the record you are currently listening to, or just want to display. Designed to fit command strips for easy hanging and removal. Happy listening! Print instructions ============== Resolution: 0.2mm Infill: 10-20%…
The model is composed of two parts, the stick and a flex ball to be assembled on its top. I have printed the stick with black PLA and the ball with blu Filatech FilaFlex40. The final result looks very similar to the original one. I…
This otter figurine captures the playful spirit and sleek form of this beloved river mammal. Ideal for collectors, educators, or decorative purposes. Printing : Compatible with FDM and resin printers Supports : Needed under paws, tail,…
These letters have height of 4mm on top of a 10x10x10mm cubic pedestal. The letters are meant to be used manually, imprinting something on a clay surface letter by letter. Font - Calibri Size - 5mm height for capital letters Nozzle -…
A Blank Card with the size of one regular Bicycle Playing Card (88 mm x 63 mm). You can use this card as a bookmark. Use different colors, for differents cards. If you are a magician like me, you can use this blank card for your magic…
Come across so many broken ps2 disc tray covers while doing console repairs, seems inevitable at somepoint those without covers will out number those with. Heres my parts. You'll have to dab glue to it to mount it but better than not…
Push and twist right in place. Sits firm in place for no wiggle or movement. Holds in from the 9mm hole in the back of the Benchy. Holds 7-3 Benchys Screw/Tape option (4mm Screw Hole) 20%infill No supports STEPS: Rotate Benchy to the…
Support required under the letters. Use smart fill to paint on supports Vinyl sleeves are light so you can use double sided tape to stick to cabinet or wall. Or create your own holes in Prusaslicer for a stronger fix with screws.
Most tools you can purchase are either too small or built more for pottery clay or cake decorations. This design as well as others in the collection are for bigger hands plasticene (non-drying) type clays. At this point, I call this a…
Introducing the Kitchen Sidekick, the ultimate 3D printed utensil holder designed specifically for play kitchens! Tired of scattered spoons and forks after an imaginative cooking session? This practical and customizable caddy solves that…
🏆 World Cup 2026 ⚽ 🇲🇽 Mexico The Adidas jersey for Mexico in 2026 has been revealed, it's a design that pays homage to the 1998 World Cup jersey that featured the Aztec Sun Stone (Tonatiuh). It's very easy to print in colors, even without…
A simple dice display stands to help display and organize your favorite dice. A three-stepped version and 3 different height single stand options as well. Easy to print and assemble no glue required. I have included a blank shelf for…
The cabinet is in scale 1 to 12 exept for the hinges because the would be to small to print. Assembly instructions are in the pdf file. Update: I uploaded the files “Display cabinet” and “Writing deskdoor” again after I redrew it. Update:…
This is a overlay for the moon tiles in Terraforming Mars - Colonies expansion to get them fully enclosed.
Print “Lego_Stud_Diameter_Test” first, test it and choose the right diameter size for your display stand models. Every display stand model comes in three different stud diameters (4,9mm 5,0mm 5,1mm) and in two versions (stud compatible…
