Liczymy pasujące modele…
Компактный корпус для размещения сенсорного дисплея TS35-R (без ручки) размером 121х76х23 мм для крепления к конструкционному профилю 20х20 или 20х40. Данный дисплей работает с платой DLC32, которая работает с чпу и лазерными граверами и…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
My Twotrees Totem laser was provided with a 8 bits board. I wanted to have autonomous laser engraver thus I switched for MKS DLC32 with low cost 2.4 LCD screen. This design will work on any 20x20 V-slot rail. I have used PLA as there is…
Simple Case for MKS DLC32 Needed parts: 4 M3x4x5 heat thread inserts 4 M3x12 screws
Here is an enclosure I designed for the MKS DLC32 V2.1 and the accompanying TS24-R v2.0 touchscreen. It has vents and opening for a 30mm fan for cooling the drivers. At the rear, power, USB, and TF card are accessible, as well as an…
Gehäuse-Oberteil und Gehäuse-Unterteil für die CNC-Steuerplatine “Makerbase MKS DLC 32 V2-1”. In das Gehäuse-Oberteil kann zusätzlich ein Lüfter 40 x 40 mm eingebaut werden.
Work in progress
Case for MKS DLC32 board and TS35 screen for TwoTrees engraver TTS55 or TT5.5S. You need : - 2 screws M3x10 for frame 20x20 mount - 2 Tnuts M3 for frame 20x20 mount - 7 screws M3x10 countersunk head - 8 screws M3x5 for the board and…
I replaced my K40 controller with the MKS DLC32 and needed to crate a new control panel. This is the result. Link to MKS DLC32 on Amazon: https://www.amazon.com/gp/product/B09M8BBGQS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 The…
PET-G Prusa Orange Layer 0,2mm 3x perimetr Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Notes: PET-G Prusa Orange Layer 0,2mm 3x perimetr Category: Electronics
PET-G Prusa Black Layer 0,2mm 3x perimetr Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Category: Other
Box for MKS DLC32 board with box for TS35 LCD display. I use it for my laser. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Plastika Trček PETG any Category: 3D…
This is a slight remix of a design from Thingiverse.
MKS DLC32 DIN rail mount MKS-DLC32 github Compatibility: MKS DLC32 35mm DIN rail Mounting components: M3 screws M3 stand More DIN rail mount design
A base plate for the MKS DLC 32 controller. The holes have a diameter of 3mm and can be drilled to 4mm to insert M3 melting inserts. Printable with PLA, wall thickness 3-4, filling 20%.
I made it for my build of a Laser Engraver. It was printed without support on Ender 3V2.
I made a motherboard case for the MKS DLC32
A simple CNC Case for MKS DLC32 v2.x + TS24R LCD + GRBL_SPD and Buck Converter. The cool air is pulled from the right hand side vents ensuring temps stay nice and low. Update : Version 2 uses M3 bolts to hold the lid on and has space for…
A more advanced CNC Case with XLR Sockets for MKS DLC32 v2.x + TS24R LCD + GRBL_SPD and Buck Converter. The cool air is pulled from the right hand side vents ensuring temps stay nice and low. GRBL_SPD for Makita Routers available HERE .…
A more advanced CNC Case with aircraft style GX16 and GX12 Sockets for MKS DLC32 v2.x + TS24R LCD + GRBL_SPD and Buck Converter. The cool air is pulled from the right hand side vents ensuring temps stay nice and low. GRBL_SPD for Makita…
My Sculpfun S9 has had many changes. One of them is a touch screen controller with WiFi for easier remote access and control. The screen was always a pain to put anywhere. It would fall, it would be in the way, it would….. anyway, time to…
Ein erweitertes Gehäuse für das GRBL-Board MKS DLC V2.1 mit eingebauten Driver-Adapter P-DA-01.
Housing - DLC32 V2.1 Board with TS35-R Touch-Display for Laser 3 Parts plus Feeds With a hole for RESET-Button And Mount for 40x40mm Fan Category: DIY
Just print and plug. No screws required
🔩 Hardware Required: 6x M2.5 x 8 mm self-tapping screws (I just used some random ones I had lying around) 4x M3 x 4 mm threaded inserts (outer diameter: 5 mm ) 4x M3 x 6mm screws.
Ender3 V3SE PLA, 100% infill, just for rigidy) no supports
Used for a CNC router, has place for 6 x GX12 connectors. Place to mount a 30mm fan, inside case. Hole for cables to the display, if you want to have that connected. Use 4x 3x10mm M3 bolt and nuts for PCB and 4x 3x10mm bolts for top.…
If you need additional protection for Godox LC30 lens during transportation - you are in the right place! Material: PLA Layer height: 0.2mm Supports: No Infill: 20%
Model of the flame deflector for pad 34 used for the Saturn 1B launches. Model made from drawing outlines and dimensional data on a photo. I have not been able to find actual construction drawings or what was used as a refractory material…
A design I made for a school I support to mount a phone to the wall to use for students to check books out of the science library. I designed it in TinkerCAD. The print is from the first design; I had to modify it to allow the USB-C…
WebLaser Controller Enclosure — Raspberry Pi 4B + MKS DLC32 V2.x A compact, print-in-place-friendly enclosure that houses the complete electronics for a browser-controlled laser cutter / CNC: a Raspberry Pi 4B , an MKS DLC32 V2.x…
I've invested in refillable ink cartridges for my Brother printer from InkOwl. This is not an endorsement by any means (but so far they've been great!) These refillable LC3037 cartridges must be kept upright since there is an air inlet at…
This is an enclosure for the DLC32MAX board. The lid has holes for two 40×10 mm fans to cool the board. The board has only one fan connector, so I connected the fans in series. It also features quarter-turn screws for mounting the…
MKS DLC32 + TS35-R plotter enclosure See https://stephenc.github.io/post/2026-10-02-building-a-plotter-part-2/ A ventilated controller enclosure designed for fitting an MKS DLC32 V2.x controller and MKS TS35-R V2.0 touchscreen to a…
This is an enclosure for the DLC32MAX board. The lid has holes for two 40×10 mm fans to cool the board. The board has only one fan connector, so I connected the fans in series. It also features quarter-turn screws for mounting the…
