Wyniki wyszukiwania: magigoo

Sortowanie

56 modeli

P
PrintablesBrandon Raineri

Gridfinity Magigoo Holder

Background: Here is a Magigoo holder for the popular Gridfinity storage system. It's a remix from the 1x1x3 bin and is set up to accept 6mm x 2mm magnets. It utilizes crush-ribs to create a press-like fit to securely hold the Magigoo…

Pobrania
380
Polubienia
48
Ocena
5
P
PrintablesScottw86

Skadis Magigoo Holder

Holds a bottle of Magigoo for IKEA Skadis! Or any other 30mm diameter bottle. Prints well with any settings/material (I used .15mm layer PLA). I recommend using organic supports for the tabs.

Pobrania
369
Polubienia
45
Ocena
4,88
P
Printablesskelly

Gridfinity Single Magigoo Bottle Holder

This is a Gridfinity compatible holder for a single bottle of Magigoo. The hole is 30mm in diameter so it'll hold anything else that fits in it too. Its Gridfinity size is ½ height by 1x1. Original Gridfinity design by Zack Freedman…

Pobrania
366
Polubienia
53
Ocena
4,82
P
Printables35°C0lDFuSi0n

HSW 30mm Glue stick or Magigoo holder.

Hold 30mm glue stick or Magigoo bottle on honeycomb storage wall.

Pobrania
319
Polubienia
35
Ocena
4,9
P
PrintablesSTprinting

Bambu Labs Glue stick and Magigoo holder

This is a holder for a glue stick and Magigoo pen (or large Glue stick) that uses two 15mmx3mm magnets.

Pobrania
232
Polubienia
33
Ocena
5

HSW Magigoo Holder

A HSW insert that fits the 120ml / 4oz Magigoo bottle I created this model because I wanted to learn how to do the honeycomb-style cylinder pattern, and because I couldn't find an HSW insert that fit the Magigoo glue stick I had. Win-win!…

Pobrania
181
Polubienia
30
Ocena
4,33
P
PrintablesKudeiro

Magigoo stick holder for HSW

This is a holder for 4 Magigoo sticks.

Pobrania
159
Polubienia
22
Ocena
5
P
PrintablesErdeSchnauz

Ikea Skadis Magigoo holder

I made a Magigoo holder for my Ikea skadis board, that only uses one width. The measurements are taken from the universal Skadis hooks. I printed with organic supports for the Hooks.

Pobrania
138
Polubienia
12
Ocena
5
P
PrintablesGeorge Baker

Gridfinity 3x1x3 Bin for Magigoo Adhesive Stick (no magnets, no holes)

The bin was created with GridfinityGenerator ( https://apps.autodesk.com/FUSION/en/Detail/Index?id=7197558650811789&os=Win64&appLang=en ) and then adapted to fit the adhesive stick.

Pobrania
100
Polubienia
10
Ocena
5
P
Printablesgiostealth

Magigoo Pro Gridfinity

Recently got the Magigoo Pro kit and made this gridfinity bin for the four bottles and the microfiber towel included. Feedback welcome

Pobrania
84
Polubienia
19
Ocena
5
P
Printablescmaddy

Printer Toolbox Remix for Magigoo, Plastic Scraper, and IPA

I thought the look of the original toolbox was fantastic, but I didn't need slots for the metal scrapers. Nils kindly provided a STEP file for modifications. I replaced the scraper slots with a cavity for a tube of Magigoo and a plastic…

Pobrania
78
Polubienia
19
Ocena
5
P
PrintablesSalman

Magigoo Magnetic Holder

I like my tools to be easily accessible. This is a holder for Magigoo. It has a snug fit Insert 2x 8mm x 3mm magnets (I used a tiny drop of superglue) Print instructions Printed in PLA Using 0.2mm settings Support on build plate only.

Pobrania
65
Polubienia
2
Ocena
0
P
PrintablesExeu

Magigoo Holder for HSW

Just a single Magigoo Holder for HSW. You can attach this with an empty HSW Insert. Have fun :)

Pobrania
63
Polubienia
12
Ocena
5
P
PrintablesLaurWatt

Gridfinity EasyFix Magigoo 3DLac build plate adhesive supports

Gridfinity EasyFix Magigoo 3DLac build plate adhesive supports

Pobrania
60
Polubienia
2
Ocena
5
P
PrintablesAndre

Magigoo Box

4 magnets 6x3mm are needed…

Pobrania
60
Polubienia
2
Ocena
5
P
PrintablesRoland Deschain

Magigoo Holder for Ikea Skadis Board

I ordered a set of ARC-PEGLAGO panels for my P1P so I needed a way to attach things to it. This is the first model I've created so that I can attach Magigoo to the printer. To attach the holder to the Skadis panel I used the excellent…

Pobrania
60
Polubienia
18
Ocena
5
P
PrintablesThatBlindGuy59

Magigoo holder

Holder for 6 Magigoo bottles & a storage tray for grease tubes, etc.

Pobrania
60
Polubienia
6
Ocena
0
P
PrintablesMukluk Actual

Gridfinity Holder for Magigoo 3D Printing Adhesive

Printed in PLA, didn't use supports.

Pobrania
57
Polubienia
6
Ocena
5
P
PrintablesRT3D

Magigoo Pen Holder

I designed a small little holder for my Magigoo pens. I mounted between my cabinets. Update 06/25/2018: Added second model v2. Version 2 has a resting point for a second wood screw so the model doesn't move side-to-side when mounted.…

Pobrania
55
Polubienia
6
Ocena
5
P
PrintablesAlekoy

Gridfinity upside down Magigoo-holder

I prefer storing my magigoo-sticks upside down, this way they do not dry out as fast. It is designed with some small grips inside that makes it so that the cap will stay in the holder, and you just unscrew the bottle from the rest. Should…

Pobrania
55
Polubienia
11
Ocena
5
P
PrintablesPiotrS

Magigoo Holder for Honeycomb storage wall

I use Honeycomb Storage Wall for storing accessories for my Bambu, but couldn't find a suitable holder for a Magigoo, that I would like. For Liquid glue from BBL and Kores Stick I use amazing models from KYZ…

Pobrania
52
Polubienia
16
Ocena
5
P
PrintablesNem

Replacement "Magigoo" cap (longer sponge life)

Although I love my Magigoo (really, I love the stuff!), I go through periods of time when I'm not printing anything. With the standard cap, the sponge applicator can stick to the top of the inside of the cap when it dries out. Next time…

Pobrania
44
Polubienia
6
Ocena
4
P
PrintablesRxunique

Bulk Magigoo Gridfinity

5x Magigoo based on Gridfinity. 2x big bottle, 3x small bottle, can also take glue stick

Pobrania
43
Polubienia
6
Ocena
0
P
Printableskjbturok

Glue stick dock ( glue stick / Magigoo / 3DLAC )

A dock for 3DLAC brand spray glue. Update 04/09/22. A dock has been added to contain them all. Supports bamboo glue stick, Magigoo and 3DLAC in one design. If you like my designs give me like and share. If you like them a lot invite me to…

Pobrania
42
Polubienia
12
Ocena
5
P
PrintablesIR Blinx

Magigoo Holder

5 different mounting versions of my 4 x standard Magigoo bottle holder. Created in response to an idea by Tom Jackson, print photos from Tom. Through hole version Key slot version Disk magnet version (up to 9 off 10mm x 2mm magnets to be…

Pobrania
41
Polubienia
5
Ocena
0

Adhesive organizer stand for magigoo, layerneer bed weld, and vision miner nano polymer bottles

Adhesive organizer stand for bed adhesives. sized for magigoo, layerneer beld weld, and vision miner's nano polymer bottles. I printed these in PETG with 15% infill. I included the Fusion 360 file, have fun. I look forward to your remixes…

Pobrania
39
Polubienia
4
Ocena
5
P
PrintablesThe Next Layer
Pobrania
37
Polubienia
4
Ocena
5
P
PrintablesSTprinting

Magigoo pro set mount

Magnetic holder for the Magigoo Pro set of bed adhesives

Pobrania
36
Polubienia
5
Ocena
5
P
PrintablesFormtechNZ

Magigoo Glide roller stand

Magigoo Glide roller stand by Benoit at Magigoo Singapore

Pobrania
33
Polubienia
4
Ocena
0
P
Printablestottot85n3D

HSW 50ml Magigoo Holder

simple 50ml Magigoo holder for HSW

Pobrania
31
Polubienia
1
Ocena
1
P
PrintablesFiberthree

Upside down Magigoo stand

With a lot of printers comes a lot of Magigoo sticks ;) To prevent them from drying out, this part keeps them stored upside down and keeps them from falling over.

Pobrania
31
Polubienia
3
Ocena
5
P
PrintablesKunal

DIY Magigoo Formula + Holder

This is an easy to make DIY formula recommended by Reddit user “toasterinBflat” Promotes bed adhesion, but also easy to remove after cooling! Use 1:2:2 ratio of the following after dividing your container into 5 equal parts: 1 part Clear…

Pobrania
29
Polubienia
26
Ocena
5
P
PrintablesDarragh

Magigoo bottle holder

This is a remix of the Magigoo mount by Jubelsalami. There are 3 versions, a version in the orignal style that holds 6 bottles as well as a 4 bottle and 6 bottle version that attach to a flat surface such as on the side of a LACK rack.…

Pobrania
26
Polubienia
0
Ocena
0
P
PrintablesFyrby Additive

Prusa XL Side Mounted Magigoo Holder

🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a magigoo holder which is easy to mount on the side of your Prusa XL as pictured next to my nozzle case holder. You will need the following hardware to attach it to your XL: 2x M3nEs nuts 2x M3x8 screws and washers…

Pobrania
25
Polubienia
6
Ocena
0
P
PrintablesTony

Hex single Magigoo holder

Fits Honeycomb Storage Wall by RostaP.

Pobrania
24
Polubienia
2
Ocena
4,5
P
PrintablesJatinker

Parametric (magigoo) adhesive holder

3mf is x1c print file for magigoo sticks. f3d is fusion 360 parametric 3d model for easy adjustment if dimensions.

Pobrania
23
Polubienia
2
Ocena
0
P
PrintablesLP3D

Gridfinity Refined Magigoo holder

This is a gridfinity bin for Magigoo bottles, modified for Gridfinity Refined base. Required hardware: Whichever filament you prefer. Printing instructions: Print as placed with no support. Note: Posted model comes with magnet holes. If…

Pobrania
21
Polubienia
1
Ocena
0
P
PrintablesAWarchol

Magigoo Holder for Ikea Skadis Board - 100% Printed

I printed Roland Deschain's model some time ago and never ordered the M2 hardware for the T-Nut mounting system. After having SMACKMAX_'s bins in use for a while, I though I'd incorporate a 45 degree print orientation and printed hooks…

Pobrania
20
Polubienia
3
Ocena
0
P
Printablessirromeoj

Magigoo Pro Gridfinity Storage - Fully Stackable

This is a Gridfinity Storage container for the 4 bottles that come with Magigoo Pro Kit. The sides are taller than normal to allow for more items to be stacked on top.

Pobrania
19
Polubienia
5
Ocena
0
P
PrintablesNem

Layerneer bottle holder (upscale of RT3D's Magigoo holder)

Just a scaled up version of RT3D 's Magigoo holder so it can hold a bottle of Layerneer Bed Weld . I just used some slightly bigger screws I had laying around. Printed in PLA. I think both products are excellent - make sure to go and…

Pobrania
17
Polubienia
1
Ocena
0
P
PrintablesJohn Smith

Magigoo Case

2, 3 and 4 bottle variations to protect your Magigoo from sunlight exposure. Fis standard size bottles I used PLA with 20% infill, position on build plate with openings facing up. No supports needed.

Pobrania
17
Polubienia
1
Ocena
4
P
PrintablesIbot_3D

Skadis Magigoo Holder

Use the Skadis T-Nuts and some M2 screws for mounting

Pobrania
17
Polubienia
5
Ocena
0
P
Printablesfissi0n - K1TDG
Pobrania
16
Polubienia
0
Ocena
0
P
PrintablesAntoine6776

magigoo glue holder

Here is a magigoo glue holder for Magigoo Pro Kit. Print with PLA Use organic support for the letters and holes

Pobrania
15
Polubienia
5
Ocena
0
P
PrintablesDevin

HSW Magigoo Holder (1.69floz)

Magigoo Holder for HSW. The inner diameter of the holder is 31mm.

Pobrania
15
Polubienia
11
Ocena
0
P
Printablesthe_guyver

single glue stick holder (MagiGoo)

Same as the original model, but larger for the MagiGoo glue stick (30mm diameter) Plus added two mount versions: SKADIS and HSW For the HSW version, you need supports for the glue stick container to support the bridging that occurs for…

Pobrania
14
Polubienia
0
Ocena
0
P
PrintablesJarrod Woolley

Magigoo 4 bottle holder

Simple holder for X4 bottles of Magigoo designed to fit precisely in the space I have available. Holds 50ml or 10ml bottles as seen in the attached images. Overall Dimensions 174x45mm with 31x20mm bottle holes

Pobrania
14
Polubienia
0
Ocena
5

Stand for Blue Glue stick, Magigoo, pliers and burr remover.

I printed mine in PLA at 0.2 layer height, 2 walls, 3 bottom and 5 top layers.

Pobrania
14
Polubienia
3
Ocena
0
P
PrintablesCooterBaldwin

Multiboard Magigoo Glue Stick Holder

You use Magigoo to keep your prints from getting loose, now you need a way to keep your Magigoo bottle from getting loose. Why not mount it on the Multiboard panel you've got right next to your printer? This is a holder for a single 50ml…

Pobrania
13
Polubienia
0
Ocena
0
P
Printablesbeerman

Magigoo top mount (120ml bottle)

Quick and simple design for mounting your Magigoo 120ml bottle on top of your printer. I suggest printing two for extra grip. Category: 3D Printer Accessories

Pobrania
11
Polubienia
0
Ocena
0
P
Printableshyiger

A Holder for Magigoo Glue Sticks

Written in FreeCad 1.0.2. Holds 3 glue sticks.

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesAnatomicFlack

Magigoo Box with Debossing

I added the Magigoo Logo for the main multi-use Magigoo. I saw the logo idea on another project . I used the tools within PrusaSlicer to add the text and Logo as an SVG.

Pobrania
5
Polubienia
0
Ocena
0

Magigoo Holder

Simple tray to hold 6 50ml magigoo containers made in Fusion 360, step file included if you want to remix.

Pobrania
4
Polubienia
0
Ocena
0
P
Printables

Magigoo Holder

Simple tray to hold 6 50ml magigoo containers made in Fusion 360, step file included if you want to remix.

P
Printables

Gridfinity Refined Magigoo holder

This is a gridfinity bin for Magigoo bottles, modified for Gridfinity Refined base. Required hardware: Whichever filament you prefer. Printing instructions: Print as placed with no support. Note: Posted model comes with magnet holes. If…