P
PrintablesART TOO
CENTER MARKER - CENTER FINDER - (Tested)
Easy to use Easy to print
Wydruk około 1,29 €–1,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 9409
- Polubienia
- 2961
- Ocena
- 4,94
Wyniki wyszukiwania: marker
3112 modeli
P
PrintablesJoe
Radius measurement tool and Cylinder center finder / center marker
This is a remix of https://www.thingiverse.com/thing:1213459 My appologies to the original designer for not including the link to his model originally, as I was unable to locate the original when I posted. For use as a Center Finder;…
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
- Pobrania
- 8276
- Polubienia
- 2792
- Ocena
- 4,87
P
PrintablesART TOO
LINE MARKER - DISTANCE MARKER (Version 2.0)
Easy to use - Version 2.0 Better readable
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
- Pobrania
- 5700
- Polubienia
- 2077
- Ocena
- 4,86
P
Printablesidnarbjm
Golf Ball Marker - Three Line
This is a golf ball marker, for marking 3 straight lines on a golf ball. It was designed as slightly more than half of a sphere so it sort of clips onto the ball. I made this hoping that you would use a standard Sharpie on the middle line…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
- Pobrania
- 2397
- Polubienia
- 192
- Ocena
- 5
P
PrintablesART TOO
DISTANCE MARKER - LINE MARKER - (Tested)
Perfect for drawing lines at the right distance
Wydruk około 1,77 €–2,16 € nettoWstępna wycena jednego wariantu
- Pobrania
- 1860
- Polubienia
- 807
- Ocena
- 4,67
P
PrintablesMiceciCZE
3D Markers Scanning Kit
Recommended material PLA Print settings Layer height = 0.2 For PET reflective film markers ϕ=10mm (6mm dot) https://www.aliexpress.com/item/1005007012274939.html?spm=a2g0o.order_list.order_list_main.5.68971802SpDi3O
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
- Pobrania
- 1604
- Polubienia
- 55
- Ocena
- 5
P
PrintablesWhatWouldAnEngineerDo
Knitting Stitch Marker - “field-tested”, “knitter-approved”
Designed in collaboration with my wife (the knitter), to at least match the performance of her favourite mass-produced injection-molded knitting clips. (I figured there was not much use making something she wouldn't use anyway. Took me 6…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
- Pobrania
- 1421
- Polubienia
- 290
- Ocena
- 4,97
P
PrintablesMat
Dungeons and Dragons Status Effect Markers
These Rings fit the standard Figure size like you get them from Heroforge. The case fits 6 Rings each. Printing Instructions Basic Rings Just add a Color Change at 1.2mm. PrusaSlicer ≥2.4.0 will automatically suggest this. Exhaustion Ring…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
- Pobrania
- 1167
- Polubienia
- 561
- Ocena
- 4,89
P
PrintablesPeter Farell
John Wick Blood Oath Marker
John Wick Blood Oath Marker I plan on doing this again. I am not satisfied with it. I am going to approach it with a different design technique in the near future.
Wydruk około 2,97 €–3,63 € nettoWstępna wycena jednego wariantu
- Pobrania
- 1133
- Polubienia
- 313
- Ocena
- 4
P
PrintablesJotaEmePM
Pokemon Trading Card Game - Ability Used Marker
0.2 mm Quality 15% Infill Generic PLA Settings You can set a second color in 2.20mm (11 layer) Printed in a Prusa MK3S+
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
- Pobrania
- 1101
- Polubienia
- 76
- Ocena
- 5
P
Printablesodysseus31096
DnD AoE (Area of Effect) Marker
Marker for Area of Effects for Playing Dungeons and Dragons (or other Tabletop RPGs) on a Standard Square Grid (with a width of 1 in / 25,4 mm) This Model includes more Areas (different shapes of Areas) in one Objects, so you don't have…
Wydruk około 3,21 €–3,93 € nettoWstępna wycena jednego wariantu
- Pobrania
- 694
- Polubienia
- 108
- Ocena
- 5
P
PrintablesYTMA
Highlight Markers Holder x3 x5 STABILO BOSS
Simple holder for 3 or 5 highlight markers from STABILO BOSS Fast and economical printing. Material: PLA/ABS/PETG
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
- Pobrania
- 677
- Polubienia
- 204
- Ocena
- 5
P
PrintablesART TOO
CIRKEL MARKER - CIRKEL DRAWER - (Tested)
I want to mention https://makerworld.com/en/@O.B._Design for the inspiration. If you like this model don't forget to like, dowload and boost OBE_Design on makerworld !!! (Link to his model:…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena jednego wariantu
- Pobrania
- 382
- Polubienia
- 123
- Ocena
- 5
P
PrintablesCD
White Board Marker & Eraser Holder
If you have a whiteboard these gadgets will be very useful. Holds 5 board markers and a board eraser. Can also be used separately. You can glue magnets at the back and install on a metal surface or use 3M double sided tape. Print…
Wydruk około 3,91 €–4,78 € nettoWstępna wycena jednego wariantu
- Pobrania
- 373
- Polubienia
- 24
- Ocena
- 4,83
P
PrintablesMinietec
Tire markers / Reifenkennzeichen
Easy way to mark and label your changed tires. Just remove the cap of the valve, slip on the marker and tighten the cap. Einfacher Weg um gewechselte Reifen zu markieren. Einfach die Schutzkappe entfernen, Kennzeichen über das Ventil…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
- Pobrania
- 253
- Polubienia
- 23
- Ocena
- 5
P
Printablesabeaulieu
Frame-mountable Expo Dry Erase Marker Set
This model is very similar to the original one, except I added two “ears” and two pegs to be able to mount it to the frame of my whiteboard (see pictures). Kudos to @lendres for the original model anf for providing the Fusion360 files so…
Wydruk około 7,91 €–9,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 239
- Polubienia
- 32
- Ocena
- 5
P
Printablesstayallive
Spell AoE (Area of Effect) Damage Marker for Tabletop RPG Games
Spell AoE (Area of Effect) Damage Marker for Tabletop RPG Games on a Standard Square Grid. This Model includes multiple areas in one object, so you don't have to carry 5 to 8 AoE-Markers around. It has also different heights for different…
Wydruk około 2,89 €–3,53 € nettoWstępna wycena jednego wariantu
- Pobrania
- 227
- Polubienia
- 17
- Ocena
- 5
P
PrintablesMilan
Marker Ring for Philips Sonicare Brushes
Just a simple ring design to mark individual Philips Sonicare brushes. Quick to print and reusable. Mine have been in use for some weeks now and so far there are no problems or collisions with the rest of the toothbrush. How to install:…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
- Pobrania
- 209
- Polubienia
- 24
- Ocena
- 4,67
P
PrintablesFabio3D
Marker compass adapter: pen clamp
Have you ever had to draw a circle in pen but your compass had only a pencil tip? With this simple and small print you can screw to the compass colour pencils, pens, markers… Print it is shaped in a easy-to-print shape doesn't need…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
- Pobrania
- 196
- Polubienia
- 28
- Ocena
- 0
P
Printablesmkoistinen
Quartet Glass Whiteboard Marker Holder
I have a Quartet Whiteboard and designed this 6-marker holder that slides over the whiteboard at the top. I printed mine in black PETG. 1-Jan-2024 - Added a version with 1.9mm holes for markers made by other brands such as Expo.
Wydruk około 6,15 €–7,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 189
- Polubienia
- 18
- Ocena
- 4,5
P
PrintablesSteveS42
Stitch Marker Box #2
After my Stitch Marker Box #1 had been in use for a little while, we noticed a slight deficiency. With only one lid and four compartments, bumping it (like a cat jumping up on your lap) could spill all four compartments. I modified the…
Wydruk około 3,03 €–3,70 € nettoWstępna wycena jednego wariantu
- Pobrania
- 180
- Polubienia
- 78
- Ocena
- 4
P
PrintablesMikodebiko
Anya Forger Spy x Family - Color with markers
Check out this short video of the Anya I made :) https://www.youtube.com/shorts/DnFY0eHya40 Anya Forger from SpyxFamily free standing model. Printed in black and white then colored the model with sharpie markers.
Wydruk około 2,63 €–3,21 € nettoWstępna wycena jednego wariantu
- Pobrania
- 168
- Polubienia
- 14
- Ocena
- 5
P
PrintablesPrintium 3D
LM8UU & LM10LUU Bearing Marker
Use this simple tool to accurately mark each LM8UU or LM10LUU bearing in your next build with a permanent marker for precise alignment every time. Prep Clean off the oil film on the outside of the bearings before marking with a permanent…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 155
- Polubienia
- 34
- Ocena
- 5
P
PrintablesArea51
Car Tire Markers
Easy tire marker for your car - mark when changing tires for winter and summer. Avoid getting the wheels on the wrong way after storage... :) Can be mounted with zip-ties or fits over the air valve for easy placement. Marks (English): RF…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 150
- Polubienia
- 30
- Ocena
- 5
P
PrintablesMar Ber
Pool Billard Position Marker
Printed with variable layer height. Standard Parameters.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
- Pobrania
- 149
- Polubienia
- 12
- Ocena
- 5
P
PrintablesTaisT
Copic Marker Holder w/ Expansion & Modularity: V1
This is a holder/organizer for Copic “Classic” Markers. It features slots in the side for later expansion, allowing you to connect multiple holders together with the “Expansion Connecter” piece (I will probably make addition desk…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
- Pobrania
- 146
- Polubienia
- 30
- Ocena
- 0
P
PrintablesART TOO
LINE AND CENTER MARKER - TWO IN ONE - (Tested)
This tool combines the ability to mark the center and distances whith your workbench ruler !!! 3 sizes ar available, depending on your ruler
Wydruk około 3,65 €–4,46 € nettoWstępna wycena jednego wariantu
- Pobrania
- 141
- Polubienia
- 50
- Ocena
- 5
P
PrintablesIgnacio Gabriel
Typographic stencil ruler, for markers and Sharpies.
Typographic Stencil Ruler for Markers and Sharpies Description: This versatile typographic stencil ruler is designed for use with markers, Sharpies, and other broad-tip pens. It features characters from the Pauza Stencil typeface,…
Wydruk około 2,87 €–3,51 € nettoWstępna wycena jednego wariantu
- Pobrania
- 115
- Polubienia
- 23
- Ocena
- 5
P
Printablesrobosocks
Igloo 5 Gallon Drinking Water Cooler Cup Holder for Solo Cups with marker holder
Igloo 5 Gallon Drinking Water Cooler Cup Holder for Solo Cups with marker holder I wanted to use larger solo cups with my cooler when at outdoor events. I think the stock tube comes is smaller, for the paper disposables. With this…
Wydruk około 4,29 €–5,25 € nettoWstępna wycena jednego wariantu
- Pobrania
- 110
- Polubienia
- 16
- Ocena
- 0
P
PrintablesM.M.B.
Philips Sonicare Color Marker
As Philips does not provide any possibility to mark toothbrushes I wanted to have a minimal and strongly attached thing. Printed with MK4 and PLA. It fits perfectly. It is tight to put on but then stays where it should.
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
- Pobrania
- 102
- Polubienia
- 12
- Ocena
- 4,6
P
Printablesthe_stag
Star Wars Legion Deployment Zone Marker
Two versions of the L shaped deployment zone markers for Star Wars Legion. One version is layered for a single filament printer, you can change the color at different layers. The other version is for an MMU style printer that allows a…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
- Pobrania
- 90
- Polubienia
- 4
- Ocena
- 0
P
Printableswilliamdecker88
Disc Golf Mini Marker Display
Printed on Prusa Mini+. Turned out best when aligned “longways” with the movement of the print bed. I used organic supports (build plate only) on the overhangs of the front of the basket.
Wydruk około 4,68 €–5,72 € nettoWstępna wycena jednego wariantu
- Pobrania
- 88
- Polubienia
- 11
- Ocena
- 5
P
PrintablesMonkey Prints
Magnetic Pen Holder for Whiteboard Marker
Pen Holder for whiteboard marker This model can be used as a whiteboard pen holder. Pens up to 17mm in diameter can be used. Simply glue in some 6x3mm or 6x2mm magnets so that the holder stays at your whiteboard. No support structure…
Wydruk około 1,00 €–1,23 € nettoWstępna wycena jednego wariantu
- Pobrania
- 82
- Polubienia
- 14
- Ocena
- 5
P
PrintablesPhilippHee
Pen Holder for edding 3000 Markers
Pen Holder for edding 3000 Markers This pen holder can hold up to 10 edding 3000 markers. Ideal for the desk or workbench. The holes for the pens have a diameter of 16.5 mm and a depth of 95 mm. Product Set of 10 edding 3000 markers (…
Wydruk około 9,99 €–12,21 € nettoWstępna wycena jednego wariantu
- Pobrania
- 80
- Polubienia
- 14
- Ocena
- 5
P
PrintablesOGPrintedProjects
Carrot Vegetable Marker
If you're like me you plant a lot of seeds in your vegetable garden and forget what you planted where. I made these to help me remember. Included is a gcode for a Elegoo Neptune 4 using PETG. In order to get the correct colours you have…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 72
- Polubienia
- 16
- Ocena
- 0
P
Printablestoco_zg
Markers for bottles (beer or similar)
Only 1mm thick, print in colours you like.
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
- Pobrania
- 71
- Polubienia
- 20
- Ocena
- 4
P
PrintablesAudi
Crayons and Markers Box
This box holds up to 48 crayons and 50 Crayola Super Tips markers with an extra bin for miscellaneous stuff. The six crayon inserts make it easier to retrieve short crayons without tipping over the entire box. Although I designed the…
Wydruk około 8,30 €–10,15 € nettoWstępna wycena jednego wariantu
- Pobrania
- 68
- Polubienia
- 29
- Ocena
- 0
P
Printablesryanchakajodda
Sleeping Gods: Distant Skies Health Marker
This model slides onto the edge of character boards for the for the board game “Sleeping Gods: Distant Skies” to track health. This model avoids the problem of bumping the wooden health tracker that normally sits on the board. No supports…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
- Pobrania
- 66
- Polubienia
- 6
- Ocena
- 0
P
PrintablesmoWerk
Triple Edding Holder Wall Mount | 15mm Pen / Marker Clip
Quick to print wall mounted holder for three foil markers with 15mm diameter
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 64
- Polubienia
- 18
- Ocena
- 5
P
PrintablesDW
Zollstockclip / Folding Rule Clip , Speedmarker
Ein kleiner Clip für den Zollstock um Maß- und wiederholungsgenau Rundungen und geraden anzuzeichnen. Ich benutzte die kleine Version gerne auf der Arbeit um z.B. Abstände schneller kontrolieren zu können. A small clip for the folding…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
- Pobrania
- 54
- Polubienia
- 14
- Ocena
- 4
P
PrintablesEskichagar
Marqueurs pour tricot (angles arrondis) - Knitting markers (rounded edges)
I used PLA, no brim (nor support).
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
- Pobrania
- 50
- Polubienia
- 6
- Ocena
- 0
P
Printablesd0m1n4t3
Tipsy Toss scoring marker
Score marker for the backyard Frisby game Tipsy Toss (not sure if the game/company has its own website, but its this: https://www.amazon.com/GoSports-Tipsy-Toss-Flying-Bottle/dp/B07YYZDB32?th=1) . The markers don't always grip tightly, so…
Wydruk około 0,66 €–0,80 € nettoWstępna wycena jednego wariantu
- Pobrania
- 48
- Polubienia
- 3
- Ocena
- 0
P
Printablesakamaka
PrusaXL - Dual Nozzle Size Marker
PrusaXL - Dual Nozzle Size Marker One Ring for nozzle size One Ring for nozzle type
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 46
- Polubienia
- 4
- Ocena
- 4,75
P
Printablesplabs.cz
MMU2 marker
Each of the filament positions is marked with the same color on the PTFE tube and the MMU2 unit.
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
- Pobrania
- 44
- Polubienia
- 12
- Ocena
- 5
P
PrintablesAwei
marker pen box 4x5
The Michael Pen Holder is compatible with Copico and Touch square pen barrels.
Wydruk około 8,43 €–10,31 € nettoWstępna wycena jednego wariantu
- Pobrania
- 43
- Polubienia
- 4
- Ocena
- 0
P
Printablesbkgoodman
Expo Dry Erase Marker Suction Cup Holder Set
I think I used these suction cups: https://www.amazon.com/gp/product/B09MM2TMC7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Print flat side down - no supports.
Wydruk około 3,38 €–4,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 39
- Polubienia
- 6
- Ocena
- 0
P
PrintablesNotReallyLex
Minimalist Magnetic Marker Clip
Intro A fast printing minimalist magnetic clip that keeps your fine point Sharpie® marker on the fridge, whiteboard, or any magnetic surface, always visible, always within reach. Available in three versions to fit different magnet sizes:…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
- Pobrania
- 39
- Polubienia
- 3
- Ocena
- 5
P
PrintablesFrankey
Whiteboard-Marker-Holder
Whiteboard-Marker-Holder Diese Halterung ist für Whiteboard Marker die ich auf Pollin fand: https://www.pollin.de/p/whiteboard-stifte-890317. Es gehen auch andere Stifte mit einem Durchmesser von 21mm. Für die Befestigung nahm ich…
Wydruk około 2,58 €–3,16 € nettoWstępna wycena jednego wariantu
- Pobrania
- 30
- Polubienia
- 3
- Ocena
- 0
P
Printablesselfish
Rogue RM-4 Rack Markers
Made these to speed up the process of moving my J-hooks around. Now I can spend more time on my phone between sets.
Wydruk około 2,63 €–3,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 30
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMrTrick
MÅLA Marker Lid-Clamping Organizer
This design holds 24 MÅLA marker pens . The inner and outer part squeeze together (with common wood/drywall screws) to clamp the pen lids in the organizer, so when a pen is removed the lid stays fixed. Solves a real problem in our…
Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu
- Pobrania
- 26
- Polubienia
- 5
- Ocena
- 5
P
PrintablesPonte
Betrayal Legacy Trait Marker
These trait markers for Betrayal Legacy dont dmage the board as much as the original ones. I provided 2 print files for PETG on the Ender 3V2 with direct drive kit (Prusament Recycled PETG). It needs some Sanding at the end if you print…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 23
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKubiV
V-Board Master Marker Holder
V-Board Master Marker Holder With fixed Markers in sockets Use 6x M6 bolts and nuts to holde markers in place 2x Magnets https://www.pilotpen.eu/en/v-board-master-marker-pen-begreen-fine-bullet-tip.html?master_product_id=1515
Wydruk około 6,44 €–7,87 € nettoWstępna wycena jednego wariantu
- Pobrania
- 23
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMaWoKo_3D_Druck
Glas Marker for Party
Hey Leute, wer kennt das nicht? Eine Feier, viele Gläser und die Frage, wem welches gehört. Da hilft ein Glasmarker! Einfach, schnell und perfekt, um Filamentreste loszuwerden. Gedruckt mit einer 0,4er Düse in 30% Infill und 0,25mm…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSTEINISKO
Marker holder
Easy 1h print (use 2 sided tape or blue tack to stick to wall or wherever you want ) print at 500% scale (There is small problem with model-in your slicer put Z localisation -0.2mm (to make 1st layer dissapear) ) No supports needed. Use…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
- Pobrania
- 19
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJohn Doe
Support de rangement 8 Promarker
support pour feutres de la marque promarker
Wydruk około 5,78 €–7,07 € nettoWstępna wycena jednego wariantu
- Pobrania
- 19
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJellyTitan
Expo Dry Erase Marker Set Four Marker and Caddy flush back screw mount
Adds screw holes to the four marker caddy, designed to sit flush against the wall. This is only for the 4-marker with cleaner version. There is another screw mount remix that sits off the wall designed for mounting below white boards.…
Wydruk około 3,70 €–4,52 € nettoWstępna wycena jednego wariantu
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBrad
Whiteboard Marker Holder
This custom whiteboard marker holder with infill cylinders was designed to match my filament holder design. This fits a standard eraser, and provides space for numerous markers. Two mounting holes are provided to work with size 8 standard…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAbraxas
SDCard Marker Set
Use up not one but two colours you have barley nothing left of! Set to distinguish up to 6 SD Cards elegantly but as minimalist as possible. Designed to work with SDcards used on the MK3 models. One filament change required for maximum…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
PrintablesViktor Němeček
RPG mini Stand marker -- fit on MZ4250s models
Helpful to distinguish which creature is which or track status conditions. The need first arose, when my ranger learned Conjure animals. I just printed 8 wolves, but the turns took too long. So I also printed 8 of those in different…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
Printableshdrodel
Languo Acryllic Markers Number Tags (1000 Pieces!)
I created this numbering caps that clip on to langos acryllic markers. There's a total of 1000 caps. I Printed them using the following setup to print multicolor prints on my core one without an MMU or AMS system. Prints in PLA without…
Wydruk około 5,12 €–6,26 € nettoWstępna wycena jednego wariantu
- Pobrania
- 14
- Polubienia
- 8
- Ocena
- 4
P
PrintablesDvG3DAtelier
Wallmount Speedmarker Lets Bastel Create - Improved handling / verbesserte Handhabung
The added cutout makes it easier to remove the Speedmarker from the holder without risking damage to the plastic knurled
Wydruk około 1,50 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesWinnie-HB
Durchbruchsmarker
Schablone zum Anzeichnen der Bohrungsmitten von Durchbrüchen für OBO Stahlblechkanal 70X170. Ich habe diese Schablone erstellt um mir das Anzeichnen von Durchbrüchen an Dutzenden stellen auf meinen Baustellen zu vereinfachen. Template for…
Wydruk około 4,20 €–5,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPavel Novák
Whiteboard marker holder/Držák na fixy a látku
Design Concept This whiteboard marker holder is designed for convenient organization and accessibility. Its compact design ensures that markers are always within easy reach and stored neatly. The width of the hole in the table is 32 mm,…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
Printablesfirstgizmo
3D Scanning Marker
They come in many different shapes and forms. Can be equiped with 4x2mm or 6x2mm round magnets in order to have them stick to metal parts (like on cars) or to stick to each other. If you have no magnets, the marker works fine without. The…
- Pobrania
- 11 360
- Polubienia
- 852
- Ocena
- 4,89
P
PrintablesART TOO
LINE MARKER - DISTANCE MARKER (Easy to use)
Easy to use 2 mm increments Demo by きよさん:
- Pobrania
- 6415
- Polubienia
- 2351
- Ocena
- 4,64
P
PrintablesART TOO
Center Marker - Center Marking Tool (parametric)
Easy to print - center and quarter markings 3 sizes 10 mm 15 mm 20 mm You can scale them even further in the slicer
- Pobrania
- 5901
- Polubienia
- 2417
- Ocena
- 4,96
P
PrintablesBamBam Design
Bottle Cap/Marker V2 - Protect your Drink
Bottle Marker/Cap for Drinks & Beer Youtube Short Information about model maintenance: Due to the considerable administrative effort involved in managing models across different platforms, I have decided to maintain only the original…
- Pobrania
- 5045
- Polubienia
- 1629
- Ocena
- 4,9
P
PrintablesAK3D
Center marker with ruler
Update 05/02/2025: I've made a change that further highlights the millimeters, making it even more functional. I created this simple yet effective tool to find the center of any cylinder, up to a maximum of 180Ø mm. Thanks to the external…
- Pobrania
- 4706
- Polubienia
- 1599
- Ocena
- 4,89
P
PrintablesWhity
Magnetic Markers for 3D Scanning
Some variants of differently shaped magnetic markers for 3D scanning. The provided STLs are made for disc magnets of the size 10 x 3 mm and do need a pause command to manually insert them during the print (the 3MF file already includes…
- Pobrania
- 3407
- Polubienia
- 232
- Ocena
- 5
P
PrintablesAK3D
Center marker with ruler V2
I've perfected this simple yet effective tool for finding the center of any cylinder, now extending up to 30 cm / 23 inc in diameter. Thanks to the new ergonomic protrusion, it's more maneuverable and easier to grip during use.…
- Pobrania
- 3232
- Polubienia
- 1357
- Ocena
- 5
P
PrintablesAeviternal
Dead Space Marker - Smoothed and Engraved
Used a (slightly inaccurate but cooler-looking) Unitology font to inscribe the Marker from Dead Space. I've seen various paid models on other sites that use the inferior game rip version of the marker and are full of holes in the mesh.…
- Pobrania
- 3076
- Polubienia
- 218
- Ocena
- 4,94
P
PrintablesWinston
Open Stitch Marker
A simple, open stitch marker for use in knitting or crochet. This stitch marker is approximately 7mm in diameter, making is suitable for smaller needle gauges.
- Pobrania
- 3059
- Polubienia
- 393
- Ocena
- 4,9
P
PrintablesDen
VW Bus Marker or Tool Holder with Working Wheels (optimized for Prusa Mini)
Disclaimer : I do not take any design credit (nor blame for the flaws) of the original model. I merely tried to repurpose and improve upon it for personal use. Optimized for Prusa Mini or similar sized bed: all the files are scaled and…
- Pobrania
- 2997
- Polubienia
- 731
- Ocena
- 4,88
P
PrintablesSurfalex2000
Prusa XL series: Nozzle Scrubber / Brush (UPDATE: included position marker, added 2x redesigned debris bucket)
It cleans the nozzle every Time in get parked. Also great for Tool changer, since it then cleans every Time.No need to adapt gcode or Change the settings! 13.11.2023 Added 2x redesigned and optimized (for 0.6mm nozzle) debris buckets…
- Pobrania
- 2909
- Polubienia
- 594
- Ocena
- 4,88
P
PrintablesART TOO
CENTER MARKER VERSION 2.0 - (Tested)
The new center marker, now with ruler incl. and a more robust design !!!
- Pobrania
- 2830
- Polubienia
- 1217
- Ocena
- 4,92
P
PrintablesK2_Kevin
Pen, Pencil, Markers, Stuff Holder for Honeycomb Storage Wall
Its a pencil holder I use for pens, markers and remotes. 3 designs available! NEW Versions 2 & 3: With dividers, also helps keep your pens standing at attention. Get your Prusameters… Post your Makes! If you like this project, please…
- Pobrania
- 2506
- Polubienia
- 466
- Ocena
- 4,61
P
Printablesosoderholm
Lockable Stitch Marker
Lock-style knitting markers. Works well when printed in PLA. I recommend printing with 0.15 mm layer height, but 0.20 mm is probably OK too.
- Pobrania
- 2489
- Polubienia
- 296
- Ocena
- 4,88
P
PrintablesBengineer
Disc Golf Mini Marker
This is a standard putter-shaped mini mark disc used for marking your lie in disc golf. Flies decently well! Add your own image to the top and engrave it before printing. Can be customized for tournaments or for personal use. Makes a…
- Pobrania
- 2323
- Polubienia
- 172
- Ocena
- 5
P
Printableseg_design
3D SCAN PYRAMID MARKERS
As the title states, these are scan markers for 3D scanning primarily used in Structured-light scanning. The embedded magnets are interference fit while the markers are applied as stickers on all 5 sides. BOM 10×3mm Rare Earth Magnets…
- Pobrania
- 2159
- Polubienia
- 136
- Ocena
- 5
P
PrintablesObe_Design
Circle Marker Tool
Compact Circle Marker A rotating axis with a cutout to guide a pen for precise circle drawing. Perfect for DIY and 3D printing! The measurements are in centimeters, with a hole every 0.5 cm to offer more circle size options.
- Pobrania
- 1998
- Polubienia
- 736
- Ocena
- 5
P
PrintablesAndy Thilo
Bambu Spool Honeycomb Edition with Filament Markers
Honeycomb sided edition of the Bambu refillable spool with filament marker inserts
- Pobrania
- 1826
- Polubienia
- 195
- Ocena
- 4,88
P
PrintablesDmytro
Skyrim Quest Marker
Skyrim quest marker. You can stick it with a double-sided tape to a door, a wall, your forehead, you name it. There are two sets of models provided. Single part model and separate models for each detail of the icon as well as the base…
- Pobrania
- 1788
- Polubienia
- 477
- Ocena
- 4,9
P
PrintablesMeister Edel
Height Gauge & Marker for pencils
Heyho I make knifes and for the handles I dont want to use my very heavy height ripper all the time. So I designed this height marking device to use with a normal pencil (7 mm). There are two versions. 1. 7,5 mm - 65 mm markable height.…
- Pobrania
- 1747
- Polubienia
- 796
- Ocena
- 4,91
P
Printables3D 2Lab
Desktop organizer - 4x11 marker organizer
The hexagonal side Size : 148.00*128.17*10.00 cm. The hexagon has 3 different faces, two smooth, two called "bottom" and two called "top", as in the image. When assembling the pieces, arrange both side pieces in the same way and as in the…
- Pobrania
- 1738
- Polubienia
- 882
- Ocena
- 4,78
P
PrintablesVorinami
3D Scanning Marker Pyramid
I needed some marker setup my Revopoint POP 3D Scanner is able to pick up better than flat one on the turntable. Come up with these minimalistic pyramid I put the scanning markers provided by Revopoint (10mm Diameter). Fast printed , very…
- Pobrania
- 1669
- Polubienia
- 87
- Ocena
- 5
P
Printablesm3d
Knitting Stitch Marker - Strickmaschen Markierung
Easy print for marking the stitches while knitting. The one who requested it finds it very useful :-) printed in PLA If you are interested in knitting, please have a look at my needle gauge 3D model. have fun see also blog post: Knitting…
- Pobrania
- 1612
- Polubienia
- 281
- Ocena
- 5
P
Printablesn8zrebiec
Crochet Stitch Marker
Print in place, just a simple stitch marker. Designed by me but originally posted on my Makerworld page . Print in a rigid material and multiply for however many you need.
- Pobrania
- 1612
- Polubienia
- 253
- Ocena
- 4,11
P
PrintablesSpellbound Prints
Mini Monarch Marker - MTG Monarch Token / Mini Crown
A mini crown to pass around during your next commander game that involves the monarch mechanic! The size is just small enough to fit on top of your deck as a reminder to draw a card at the end step. :) No supports! Any settings will do.…
- Pobrania
- 1544
- Polubienia
- 187
- Ocena
- 4,92
P
PrintablesChris (Aero)Engineering Design
Dovetail Marker
Thanks for checking out my model! You'll find all the details, instructions, and recommended print settings below. If you enjoy my designs and would like to support my work, feel free to buy me a coffee . I'd really appreciate it! Happy…
- Pobrania
- 1473
- Polubienia
- 823
- Ocena
- 4,75
P
Printablesgofishrd
Golf Tees and Ball Marker
There are three different versions of the golf tee. The only difference between them is the length. I have a short one that measures 1.75" - I use these for teeing off with irons. They are just long enough to keep the ball sitting atop…
- Pobrania
- 1462
- Polubienia
- 115
- Ocena
- 5
P
PrintablesObiWanJabroni
Page Marker / Holder - 1 Minute Print!
These page markers can be used to hold the page to favorite recipes, important pages that you want to refer back to in a book, favorite quotes, and to hold the page for important study material. They are a great way to help annotate a…
- Pobrania
- 1443
- Polubienia
- 371
- Ocena
- 4,85
P
PrintablesHolzerMax
Knitting-Stitch marker "Maschenmarkierer" - optimized for printing
My aunt asked me to make some knitting stitch markers in different colours. I designed this, which works well with PLA and ABS (thats what I tested so far). They print in around 1 min each, when printed in larger quantities and with an…
- Pobrania
- 1394
- Polubienia
- 173
- Ocena
- 4,94
P
PrintablesElitail
IKEA SKÅDIS Marker & Pencil Organizer – Wave Holder
A compact wall-mounted organizer for markers, pencils, pens and other cylindrical tools , designed specifically for the IKEA SKÅDIS pegboard. The wave-shaped compartments keep your tools organized, visible and easy to access. Manually…
- Pobrania
- 1352
- Polubienia
- 676
- Ocena
- 4,8
P
Printablesenque
Scanner Marker Block Kit
A magnetic marker block kit for use when scanning objects with a 3D Scanner. A Truncated Icosahedron Block (Half-globe Shape) An Equilateral Pyramid A smaller Dodecahedron block A long rectangular bar with space for M6 male and female…
- Pobrania
- 1319
- Polubienia
- 83
- Ocena
- 5
P
PrintablesZdre
UNI POSCA Paint Marker Stand
This stand holds 30 16.5mm diameter POSCA markers. Holder conveniently angles the markers easy selection and quick stowing. No supports required as long as you have good adhesion. Brim is recommended. Minimal manual support in the middle…
- Pobrania
- 1275
- Polubienia
- 168
- Ocena
- 5
P
PrintablesART TOO
DOWEL MARKER - CENTRER MARKER - DRILL MARKER (Parametric)
Easy to print drill marker - Parametric Not as sharp and durable as a metal version but for soft wood it works perfectly. Step file included in case you have any issues.
- Pobrania
- 1240
- Polubienia
- 624
- Ocena
- 4,63
P
Printablespeto.r_
VW Bus Marker Holder
ENGLISH description: A 3D Printed VW Bus Marker holder is a small but useful accessory for fans of the iconic Volkswagen Bus. This marker holder is designed to resemble the front end of a vintage VW Bus and is made using 3D printing…
- Pobrania
- 1217
- Polubienia
- 315
- Ocena
- 4,88
P
Printablesmanuelf
Small Arkham Horror LCG Path Markers
This is my take on path markers for the Arkham Horror LCG. As I do not have so much table space, I wanted to have small markers, which can be placed inbetween the cards without having to spread the cards too much. The single and double…
- Pobrania
- 1195
- Polubienia
- 175
- Ocena
- 5
P
PrintablesTwirlygrlandMom
Kitty Clip - A quick 2-minute paperclip bookmark page marker
A super easy clip to personalize your desktop supplies or add some flair to your bills. We printed it at .15 layer height with our .6 nozzle, but only because that is what is hooked up right now. It would probably still be ok with a .4…
- Pobrania
- 1177
- Polubienia
- 197
- Ocena
- 5
P
Printableslendres
Expo Dry Erase Marker Set with Fusion 360 Files
Holder for Expo Dry Erase Set. There are two versions, one for 4 markers and one for 6 markers. It can be attached to a wall using Command Strips or placed on a desk or table. There are also recesses in the back for gluing 6 mm diameter…
- Pobrania
- 1163
- Polubienia
- 164
- Ocena
- 4,95