Wyniki wyszukiwania: mem

Rowan Atkinson, Mr. Bean Meme

Rowan Atkinson, Mr. Bean Meme

Homematic Thermostat stand

Needed a nice looking stand for the Homematic Thermostat. There are 3 versions. A supportfree, that you need to use double sided Table, and 2 with spring loaded mounts. The difference in the last 2 is only in the height. For best…

Creepy Garfield Meme

Creepy Garfield Meme.

Heartfelt Memories – Photo Frame

Frame your memories with love using our unique accessory, a heart shaped instant camera frame. Let each photo tell a tale of affection as it rests within the gentle curve of our Heartfelt Memories frame, adding a touch of romance to every…

Danfoss Adapter Homematic Thermostat

Danfoss Adapter Print: Material: PETG or PLA Layer: 0,2 mm Brim: 5mm Finnishing: Cut the Ring open at on of the Notches with a Saw. Afterwards you can Fit it onto the Valve. At last Screw on the Homematic Thermostat

Mocking Spongebob : Meme

Mocking Spongebob : Meme

Tamiya Blackfoot / Monster Beetle Rear Body Mount Cross Member (Part G1)

I needed a replacement for the original cross member, as mine was broken. The part is a bit thicker as the original one, but fits the model nicely.

Clef réarmement BBG

Clef de réarmement de boitier brise glace. Pour remplacer la clef perdue ou inexistante. A tester sur votre boitier, il en existe de différents modèles. Instructions d'impression A imprimer sans support ni bordure, en PLA ou tout autre…

Stonks Guy / Meme Guy / Mr. Succ Statue

Celebrate the legend of the internet with this Stonks Guy (Meme Man) Statue ! Key Features: Iconic Design: Brings the "Stonks Guy" meme from the 2010s to life. Perfect Size: Standing at 100 mm tall, it's ideal for desks, shelves, or meme…

Memory card case / Pouzdro na paměťové karty

[EN] A simple credit card shaped case for SD cards and other small items that will keep your cards from flying around your wallet. Two cover options are available - plain without writing - with the inscription "prusaprinters.org". This is…

Meme with stickman

The stickman shows his middle finger

Stonks Guy / Meme Man / Mr. Succ Bust

This Stonks Guy Bust brings the iconic internet meme to life! Standing at 5 cm tall, it’s available in both a colorful and monochrome version. Perfect for fans of internet humor, this figurine captures the essence of the legendary…

Kabeldurchführung Schaltkasten z.B; für Homematic IP Energiesensor für Smart Meter ESI-IEC

Ich beschreibe hier eine parametrisch anpassbare Hohlraum Kabeldurchführung am Beispiel eines Homematic Leistungssensors Der Leistungssensor von Homematic IP wird an eine Moderne Messeinrichtung IMEI angeclippt. Wenn diese jedoch in einem…

Memory game exchangeable

My teacher wife wanted to have a memory game for the kids which she can reuse with customizable paper prints. Thats what came out. The paper square must be a maximum of 4.8 x 4.8 cm. Maybe a bit smaller due to tolerances. On my MK4 it…

a textile mask storage for each family member

Wearing face masks is one of the important preventive measures agains COVID19 outbreak. In Czech Republic, we don't have enough disposable masks, so people started designing textile masks for repeated use. You are supposed to desinfect…

Baby Face Vance Meme

Baby Face Vance Meme.

Pendant from a commemorative coin

Commemorative coin pendant Make a pendant from a commemorative coin without damaging the coin. Adjust the size of the model in the slicer and don't forget to pause the print to insert the coin.

Homemade printer box / Boîte pour imprimante faite maison

I made my one printer box with some recycled materials. Printed in 0.2mm layer height, 20% filling with PLA+, without support except for the hinges The side plank have 10 mm of thickness and top/bottom plank have 20 mm of thickness. For…

Better nesting memdex display and storage stand

This is a redesign of my stand for memorydex card display and storage. It keeps the ability to nest multiple stands together for storing cards, but is easier to use, stronger, and easier to print. Changes Handles extra large, top heavy…

Homemade flower pot 20 cm

Homemade flowerpot diameter 20 cm. PLA print, Gyroid filler 15%, layers 3. Legs PLA print, Gyroin filler density 40%, layers 3. Insert the legs into the bottom holes and secure with PLA glue. I wish you a pleasant printing.

Memento Mori wall lettering

I crashed my motorcycle and kept the helmet, I am hanging this above the crash helmet v3 shall print without error, remove the fizzy skin from the gcode

Case für PCB Aktor Homematic IP

Gehäuse für einen Batteriebetriebenen Homematic Aktor “Siehe Link” Meine Frau Ihre Deko bekommt so immer ein paar kleinen LED Ketten, mit Einbindung in das Smart Home Die 6 ist für eine leichte Identifizierung.

Commemorative Christmas Ornament 2024

This is a commemorative ornament for Christmas 2024 that supports multi-colored printing without the use of an MMU or AMS. Each color layer is printed at a different height to allow for color swapping. This model supports up to 7 unique…

Funny 67 Meme High Quality

If you are like me you love 67 and I have already made a model on it so I thought to end this year make a few more models. Most of my models are AI so my last few will not be AI, but the ones for Christmas will be because I started…

Photo & memories giftbox

I created this giftbox for mother's day as a way to collect small memories and photo's. It can hold a photo at the bottom covered by acrylic (3 x 100 x 150 mm) and has an acrylic engraved slide cover (3 x 205 x 156 mm)

Memory Stick Pro Duo Display Stand

This is just a simple stand that I created because I couldn't find one with all the features I was looking for. Those features being: a cutout in the front wall to show as much of the card as possible, a support on the back to help…

Western Blot_Membrane_Incubation_Box

This is a newly interpreted version of the two models: ‘Ultimate Western Blot Incubation Trays’ by Ultimo3d and ‘Western blot, antibody incubation, and protein detection box; medicine box’ by Siiqi. This version also features raised dots…

Cold Shoe Monitor Mount for homemade teleprompter

This model is designed to use this monitor from Amazon: https://a.co/d/0rkTGwB And this cold shoe adapter: https://a.co/d/13R9GcO I use this phone tripod mount to hold the phone and to provide the front cold shoe to hold the monitor…

Silly Shells for Homemade Nerf Blasters

“What are Silly Shells?”: Silly Shells are an ecosystem of 3D printed shotgun shells for homemade Nerf-style blasters! There are many, many different shells to use in each blaster, allowing one blaster to fire a wide variety of ammo types…

SLAB - Silly's Lever Action Blaster (Nerf Homemade)

The SLAB: Silly's Lever Action Blaster. A Talon-fed half-dart lever-action springer. Firing demo: General blaster overview video Firing demo video The SLAB is a lever action, Talon mag fed, half dart springer. Sellers A full list of US…

Cynthia - Bolt Action Blaster (Nerf Homemade)

Cynthia is a bolt action Nerf blaster that uses half dart Talon magazines! Firing Demo: Blaster Overview: https://youtu.be/mIW0dAyOCv0 Customization Overview: https://www.youtube.com/watch?v=mZe6dWdQUs0 Assembly Video:…

Tung Tung Tung Sahur – Meme Legend

From the depths of meme brainrot, the legendary sahur drummer is finally printable! Tung Tung Tung Sahur brings chaos, tradition, and pure internet energy into one glorious, unhinged figure. Whether you know him from the streets or the…

Alchemist - Pump Action Blaster (Nerf Homemade)

Alchemist is the next step in the evolution of 3d printed pump action springers. Alchemist is built like a tank, has a butter smooth priming and firing feel, and is customizable with many alternative parts and upgrades! MAKE SURE to…

The sims cat dancing in headphones meme. Easy assembly, separate pieces

Use a toothpick to attach the top crystal Make sure to add proper supports for the bow tie or use the included 3mf file Differences from the remixed model: Better looking top sim crystal, actually symmetric Fixed geometry in some places…

Wildstyle - Shell Fed Shotgun Pistol (Nerf Homemade)

Wildstyle is a Nerf-style shotgun pistol that uses Silly Shells! Wildstyle is loaded one shell at a time, and it has a manual ejection lever that flings the shells out of the blaster. Firing Demo: Blaster Overview: Please refer to the…

Alpha Werewolf Meme 3D Model

Get ready to embrace the Alpha Werewolf Transformation 🐺, the viral TikTok trend that symbolizes alpha dominance, loneliness, and the emo vibe! Featuring the iconic wolf filter, this 3D model brings the Emo Wolf or Lobo Solitario to life.…

KEYCHAIN MEME FLORK

Fun keychains :D

Gentlemen toad meme

Gentlemen, it is with great pleasure to inform you that I spent the weekend making this meme in blender.

MEMS Gyroscope

MEMS Gyroscope 100:1 scale model of a MEMS Gyroscope. https://en.wikipedia.org/wiki/Vibrating_structure_gyroscope For demonstration purposes only, but doubles as a nice fidget too :) Printing: Printed in PLA. Print without scaling for a…

Excalibur - Full Length Dart, Pump Action Blaster (Nerf Homemade)

Excalibur is a pump-action blaster with plenty of power, quick spring swapping, and the ability to swap between full length darts or half length darts on the go!…

USB Memory Stick/Flash Drive holder

If you like my designs, please feel free to use the “Donate” button now here on Printables, even a dollar is greatly appreciated! July 3 2023 NEW LARGE version! More room between slots for ease of fingers to grab! Plus 16 slots total…

Playstation Memory Card | Business Card Holder

Print vertically, hole pointing downwards. https://youtube.com/shorts/DYX5YIN_WNI?feature=share

67 MEME HANDS

Bring the viral TikTok trend to life with this 3D printable STL file! This digital download features two realistic hands holding the numbers 6 and 7, inspired by the popular 67 meme that took TikTok by storm. Whether you’re a meme…

67 Viral Meme | Keychain

These days kids are screaming 67 all the time. I dont know what it means but they wanted to hang 67 keychain to their school bags. So this is what I came up with. Hope you like it. Happy Printing!

Keycap Adapter for membrane keyboard

This print allows you to put cherry profile keycaps onto a membrane keyboard. There are two files, one with and one without the “nub”. The mechanical keyboard I have, Razer Ornata Chroma, has a mechanical aspect to it, so the nub is…

The Sims Cat Meme (with bouncy head)

The dancing cat with headphones meme from The Sims videogame (with bouncy head) Recommended settings: - 10% infill and 2 walls is enough - Use a modifier on the contact area of the crystal and headphones to 100% infill - Supports are…

Stan Lee Memorial Print

RIP Stan, you were like the Grandpa I always wanted. While very sad he has passed, at 95 he lived what many of us can only hope to live and achieve and that is a long and full life. A very big influence on my childhood and all the way…

Oiia Oiia Cat meme spinner

OIIA Spinning Cat 3D Model 🐱✨ Print-in-place! Glad to share this work with you guys. Pretty stress-relieving and funny. This is a 3D spinning model inspired by the OIIA meme cat. Ethel_cat IG: oiiacat_ethel The model has been optimized…

HBM-23 Belt-Fed Blaster (Nerf Homemade)

HBM-23 is a belt-fed blaster that offers a high rate of fire for an extended period of time. This is my first design, so keep that in mind if all features are not ironed out completely! I've included different parts for you to customize…

Lizard Meme (Tom)- Tik Tok

I would recommend Multi colour printing for the full Lizard meme.

Membrane Clarinet

My take on the membrane clarinet. Only a sheet of thin plastic and a rubber band required as additional parts. I was quite impressed by Nicolas Bras' video about a membrane clarinet , and I wanted to 3d-print one completely without buying…

medaile se stromem k padesátinám, medal with a tree for fifty years

medaile se stromem k padesátinám, medal with a tree for fifty years

The sims cat dancing in headphones meme boubblehead

моделька с отдельной головой и местом под пружинку от шариковой ручки

medaile se stromem - 1. místo, medal with a tree - 1st place

medal with a tree - 1st place medaile se stromem - 1. místo

medaile se stromem - 3. místo, medal with a tree - 3rd place

medaile se stromem - 3. místo, medal with a tree - 3rd place

medaile se stromem - 2. místo, medal with a tree - 2nd place

medaile se stromem - 2. místo, medal with a tree - 2nd place

pamětní mince se stromem - commemorative coin with a tree

pamětní mince se stromem - commemorative coin with a tree

67 Meme Sculpture

I haven't tested this model before. You can see and edit it in tinkercad here . Have fun! Please like my model it helps me!

Remembrance poppy

Printing and assembly Use your basic slicer settings with 100% infill. If you are using PrusaSlicer I recommend using Concentric top fill pattern for separated poppy, but for simple poppy use default monotonic pattern. Poppies look best…

MEMs Model: six axis IMU device

Model of a MPU-6050 six axis gyroscope/accelerometer IMU. Traced from a decapped (composite) scan of the chip and modified slightly to make it more printable. Warning! Very difficult print, may require scaling to work on your printer.…

METRIC VER. SLAB - Silly's Lever Action Blaster (Nerf Homemade)

These prints replace SOME of the normal SLAB v4 parts. The rest of the SLAB v4 parts require NO MODIFICATION. The print orientations on these parts are incorrect as imported. Follow the print orientation of the standard Imperial spec…

wii controller-memory cover

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/7eKViH8MW06 Out of necessity based on Mburr cover. be careful to remove the support its a 0.40 seperation above and below. Support integrated. no support…

PlayStation 1 and 2 Memory Card Storage Box with Logo

Remix of the excellent Rugged Box for storing up to 16 PlayStation 1 or 2 memory cards, or whatever else fits. Note that the box with slots is designed to fit the original OEM style card. So it may not fit all 3rd party memory cards, like…

TO DO MEMO-IT SET - Holder Case

Ultimate Reusable To-Do List – 3D Printable Productivity Tool! Looking for a fun, practical, and eco-friendly way to manage your daily tasks? This 3D-printed reusable to-do list is the perfect addition to your workspace! Designed for…

Prusa Mini USB Memory Cover

I am Love to printing with Prusa Mini. And I was want to some accessory for Prusa Mini bundle USB memory. But I can't find it. So I create it. I'de designed Prusa Mini usb memory cover and it is very simple and easy to print. I figured…

The Sims Meme Cat with Headphones | static head

3D-модель легендарного котенка из The Sims, ставшего героем вирусного мема. Тот самый котик в больших белых наушниках и с розовым бантиком, который едет в транспорте под стильный трек. Статичная фигура!!!

Terminator T-800 memorial coin

The fictional T-800 memorial coin I designed for #3Dprinting (mostly resin) Can be printed on FDM too, but for the best results resin printer recommended.

SENNA - In memory of the F1 legend

If you are a Senna fan like me, this model is for you. This model consists of many parts. You can print each one in separate colors and combine them easily. You only need to apply a color change on the part with the Senna signature.…

Membrane to normal keycap adapter

made this for my generic keyboard, i hope it works for anyone else!

PVC Membrane Clarinet

What's this? 3D printed PVC Membrane clarinet based on the plans and ideas from Nicolas Bras https://www.youtube.com/watch?v=Jk7J4_bneZo This instrument is quick and easy to print, and easy to play, you don't need any technique, just blow…

USB sticks, memory cards and caps holder

A remix of "USB SD and MicroSD holder for wide USB sticks" by Lalo_Solo ( https://www.thingiverse.com/thing:2637487 ), with added tray for caps and other stuff.

YJ board CH341A Serial/Memory Programmer Enclosure

YJ board CH341A Serial/Memory Programmer Enclosure YJ board CH341A Pro Serial interface / Memory Programmer Case with exposure of ZIF socket and DuPont connectors. The enclosure holds the board snugly. Led Light pipes optional part but…

Timemore chestnut C2 motorized grinder

video Timemore diy motorized 3d printed automated coffee grinder - YouTube Autodesk Fusion 360 assembly (f3z) included. Stl files and 3mf files included. Or you can generate it from Fusion 360. DC motor is available also on conrad web…

Middlefinger Meme – Angry Full Body Middle Fingers

Mike Wazowski Meme

You know

eQ-3 Homematic IP Danfoss RAVL Adapter V2 (M30 x 1.5)

Adapter um ein Homematic IP Gerät an ein Danfoss RAVL Ventil anzuschliessen. Das sollte auch mit anderen Ventiltrieben, die auf ein M30 x 1.5 Gewinde aufsetzen, funktionieren. Getestet habe ich es aber nur mit verschiedenen HmIP Geräten.…

Case for SlimmeMeter+ v6

This version has a little wider USB-C opening as sometimes due to different seem setting, it could get quite narrow. Best fit is to print it on 0.2mm. Where 0.3mm gave the case too much wiggling space, and 0.1mm was a very tight fit…

DigiSpark Attiny85 Enclosure | Bad USB Stick | Fake memory case | Rubber Ducky

Another case to turn a DigiSpark Attiny85 into a (fake) USB stick (or just a nice enclosure, that's up to you ;-) ). This one features a consistent hole, which allows attaching it to a key ring or some kind of tie. There are also two 2 mm…

Tom the lizard Meme - Jumpers (Film 2026)

## Design Concept This model features Tom, a meme-inspired lizard character from the upcoming 2026 film "Jumpers." Known for its expressive posture and humorous appeal, it's crafted to capture Tom's playful essence. ## Intended Use…

Tiger 1 Tank Sized for Memoir '44

This is a remix of Henrik Bjorkman's excellent "simplified tiger tank" ( http://www.thingiverse.com/thing:90265 ), reduced in scale and adjusted here and there for use in the Memoir '44 board game. As I think Henrik does, I print these…

Timemore sculptor 078 indicator

An indicator to the timemore sculptor 078(s), to help with setting the grind size.

Keychains Carpe diem / Memento mori

Keychain with motivation to live every day to the fullest Typo in the model corrected. :) Filament (color) change after the third layer and then filament change after the seventh layer. Print: Layer: 0,2mm Matrerial: PET-G Filling: 15%…

Your Did It star meme award

meme award "Your did it" Category: Art

Sanjay Mortimer E3D Founder Commemorative Hex Tile

Just a simple hex tile people can print to honour Sanjay, one of the co founders of E3D who passed away on 11/27/21. Assets include Fusion360 and STEP files should anyone wish to modify to fit a hex tile pattern they already use. Gcode…

DIMM Memory Organizer SDRAM DDR2/DDR3/DDR4/DDR5 (stackable) - Heatsink enabled

Based on djkrice organizer for SO-DIMMs. Fits 10 DIMMs, can fit more if you edit the .scad (it also has the measurement for SO-DIMMs). Can be stacked. The honeycomb pattern on the bottom is to save filament without being detrimental to…

Spider-Man Homemade Goggle Lenses

This file is the white lens/mesh for the Spider-Man homecoming homemade goggles. This file is fit for these goggles ( https://www.thingiverse.com/thing:2401612 ) but should be easily scalable for any size. If you have any…

RAM Memory Holder (DDR5, DDR4, DDR3)

Storage box for 8 desktop RAM modules (DDR5, DDR4, DDR3) with lid. The lid can be easily lifted or placed on top – there is no locking mechanism. The model comes without any labeling. Labels can be added as needed using Bambu Studio. If…

Cover for 4x4 membrane keypad

Very simple enclosure for a 4×4 membrane keypad. Started as a test-print to check if I have the dimensions right. OpenSCAD files are included. Perhaps you find this useful for your own projects. Print instructions The screw holes are…

PlayStation 1/2 Memory Card Holder (Parameterizable)

Simple PS1/PS2 Memory Card Tray/Holder

Stonks with Meme Man head

In honor of the “stonks" meme, here is a simple model that has Meme Man's head on a rising arrow coming out of the word stonks. Attribution for Meme Man head model: Author: ETGgames License: CC Attribution Title: Meme Man / Mr. Succ Link:…

Worm with a cigarette, meme / Червяк с сигаретой, мем

Червячок с сигаретой, сделан в blender с использованием ии в качестве основы. A worm with a cigarette, made in blender using AI as a base.

Hulk Hogan (Memory Bust)

Design Concept The bust captures the iconic and recognizable appearance of a famous wrestling personality, designed with detailed musculature and clothing accessories like a bandana and chain, reflecting his stature and style. Purpose…

Desktop Tool Tray Organizer remix with memory card area

A remix of thing:3857470 - agree with some commenters it would be nice to have a memory card slot somewhere on the unit, so we cobbled something into that bottom-right tray area. We like the slot designs of thing:5291498 so we used those…

PS2 Memory Card Holder

This is a holder for 3 or 4 Original 8MB PS2 Memory Cards (Magic Card)

Timemore Chestnut C2 C3 replacement lid

This is a replacement lid for Timemore's Chestnut C2/C3 coffee grinder as the original has a tendency to break after some time. I recommend one of the 46mm variants in order to minimize the amount of microplastic in your coffee. The…

Heizkörper Thermostat Reperatur Teil - Smart Home / Homematik IP / Zigbee / Tuya etc.

Update 2026: Das Ersatzteil wurde nochmal überarbeitet in der Version 1.2 mit nur 4 Schlitze. 4 Schlitze reichen aus um den Gewindering auf das Ersatzteil zu schlieben. Jetzt sollte das Ersatzteil um einiges stabiler sein. Außerdem wurde…

Lincoln Memorial

Lincoln Memorial in Washington DC UPDATE: 1/28/23 Fixed some issues with the bottom model, (now version 3), and changed the columns to this thing https://www.thingiverse.com/thing:2859447 UPDATE: 1/21/23 I have redone this model so it…

Fully painted Agamemnon’s helmet

From the Odyssey film. File is sliced for Snapmaker U1, but painted regions will remain even if the printer is changed.

Skull Dice Display - TTRPG Character Memorial

Beautiful skull dice display for any fantasy or role playing fan. As your hero lays to rest, remember them by immortalizing their d20 in this display! The print is quite delicate at the tops of the vines, be VERY careful removing…

SO-DIMM Memory Module Case

Tidy up your memory stick drawer and put all your SO-DIMM modules in one place. This SO-DIMM case holds 12 memory modules and even comes with a lid! Use with 30MM height (DDR2, DDR3, etc.) modules (or stretch the model a bit in your…