Apollo Automation MSR-2 mmWave CO2 Multisensor
https://apolloautomation.com/products/msr-2 The ball mount is a remix of: https://www.thingiverse.com/thing:67911 from Gyrobot
- Pobrania
- 1041
- Polubienia
- 63
- Ocena
- 5
52 modeli
https://apolloautomation.com/products/msr-2 The ball mount is a remix of: https://www.thingiverse.com/thing:67911 from Gyrobot
https://apolloautomation.com/ The ball mount is a remix of: https://www.thingiverse.com/thing:67911 from Gyrobot
Msr liquid fuel pump for dragonfly pump…it should work too for the standard pump (grey). Printed in Amz3d Pla. 10% infill.
This is a pour spout for Sigg / MSR bottles. It's based off a few old pour caps I remember my dad using when I was a kid. Features Separate air intake and liquid exit holes Universal fit for Sigg / MSR bottles There are two variants: V1:…
Updates: Dec 22, 2024 Added image showing parts in assembled state. Fixed stop tabs on skids (they were too far apart). Fixed swashplate and main rotor hub links (inconsistent ball offset) Updated notes Decided to model my Blade mSRX RC…
Use this device to push in MSR mini groundhog stakes without hurting your hand. Then after removing the stakes from the ground unscrew the insert and use it to scrape the mud/dirt off of the stakes.
This is an external housing for the sensor to mount it to a wall with a command strip. Printed in PETG
Having your stove break on a trip sucks. This cap clips on the bottle and protects all the sensitive parts of the pump.
clip compatible with most MSR shoe shoes straps. they are needed to sinch the straps down . small enough that doing 100% infill wont make the print take too long
Apollo MSR-2 Corner wall mount
Gold Divot Repair Tool, 118mm Size, Flip Open, Inner Baller Bearing. “LMS-Knives” design & maker. it comes with a middle button to release the fork. if you like this model, Please Click “Like”, I will happy for a whole day long!
Apollo MSR-2 Corner Mount, longer version to attach the mmWave sensor to the corner of two walls. Print with supports. I printed with PETG.
Update 3/22/23 - Added sliding plates and extra clamp for the front edge. Use these to restrict the sanding plate from racking by using a piece of paper or razor blade as a shim when setting the clamps against the sanding plate.…
Leash for the MSR fuel bottle cap. Loop the large end through the small end around the loop on the cap. Then push the large end over the neck of the fuel bottle. Print instructions Print in a TPU/TPE. I used Priline as its $25/kg on Amazon.
stubby style, small pocket knife, 110mm size, comes with bottle opener, “LMS-Knives” design & maker
This is an adapter that I made to fit a standard MSR fuel bottle for securely attaching a carabiner. Without this adapter, the carabiner falls and rattles easily. However, with it attached, the carabiner is securely and quietly attached,…
Small Pocket Knife, Comes with Belt Clip, Belt Cutter. Glass Breaker. if you like this model, Please Click “Like”, I will happy for a whole day long!
My son borrowed my whisper stove and melted my plunger. This replacement works. Try to save the plunger cap and seal from your old plunger. I use a .2mm nozzle with ultra high detail and PLA. I am not sure which material is best with the…
Butterfly golf divot repaire tool, 116mm size, comes with bottle opener, “LMS-Knives” design & maker. if you like this model, Please Click “Like”, I will happy for a whole day long!
This plunger can be 3D printed in order to replace the Fuel Plunger Assembly because you cant buy them anymore. Just so you know, ive never tested the leather or rubber cup holder because I dont have spares.
I've made this model to mount the MSR-1 directly to any wall-tap (wort, plug, whatever name) for easy placement! Version one (current) has a fusion360 file uploaded that contains the parameters for the height and width of your own USB…
Occasionally you need to disassemble the pump on a MSR Whisperlite camp stove. This tool is a special spanner to help unlock and lock the top pump retainer.
The project involves using an ESP32 to collect real-time energy usage data from a Kamstrup power energy meter’s HAN inte
Apollo MSR-2 backplate with Ball Mount to fit GPIO Header option
French Press for MSR Winburner Duo Stove (1.8L) parts needed: wire mesh with desired mesh size stainless rod diameter 5mm/ length 14cm threaded inserts. 04.07.20: added new and improved files. these are easier to print, have a better fit…
This frame is for this product: https://www.msrgear.com/water-treatment/storage-bags/dromedary-bags/dromedary-bags.html I designed these to make the water bladder a bit easier to handle. The f3d file is included for customization. The…
This is a replacement tail fin for a Blade mSR RC Helicopter. The stock fin is held by two very fragile clips, and the clips break... The fin is already quite flexible so really there's no need for the clips to be sacrificial, so I made…
A back plate for the Apollo MSR-2, adapted from the original model from Apollo Automation. It adds convenient screw holes for mounting to a wall or other surface.
A Apollo MSR-2 Mount for Busch Jaeger Reflex SI I came up with this, because there was no perfect position for my apollo msr-2. I installed a 230V to 5V converter in the wall and all you see (at least in this Version) is a cable and the…
The clip is designed with two openings of different sizes: the tight one is for the tent, and the wider one is for the footprint. Please check before mounting and be gentle during installation. I recommend clipping through both strap…
This is a modified case for the Apollo MSR-1 mmWave radar sensor from Apollo Automation. The MSR-1's pcb has solder pads for 5v, 3.3v, ground and GPIO/I2C, for great extensibility. But you can't easily solder leads to the pads with the…
A simple bracket to support the HLK-LD2410B radar module on the Apollo MSR-1. Normally the radar is supported only one one-side by the mini-dupont connectors. This creates a standoff support that props the other side of the radar against…
Requires 4 nuts, and 4x20 counter sunk M5 machine bolts per shoe (8 of each for a pair) to assemble. The 50mm wide guard is designed to be wide enough for a typical female heel, while the 66mm wide guard is for men, if needed. This fix…
MSR multifuel bottle protector. Protects the bottom of the bottle when pumping on hard surfaces. 325, 591 and 887 mL bottles.
Mount for Apollo MSR-2 on Ikea Symfonisk. Use the same back from the original model.
Problem - a camping stove I have (MSR XGK) doesn’t fit in the pot I want to use Solution - design and print a spacer Decided to add storage functionality to the spacer Spacer lifts the lid by 20mm. Sits inside to pot 20mm and has just shy…
Had a unused phone line wall plate, threw the ball mount on it for MSR-2 case
Modified Apollo frontplate to snugly clip on to a Kallax. You will still need the original backplate from your initial purchase or from https://www.printables.com/model/932026-apollo-automation-msr-2-mmwave-co2-multisensor . I am using a…
This is a compact remix of The Stock Pot’s excellent Presence Sensing Planter . The original combines a larger planter, an Apollo MTR-1 presence sensor, and an addressable LED ring. I loved the idea of hiding smart-home hardware inside…
Apollo MSR-2 Corner Mount to attach the mmWave sensor to the corner of two walls hanging from the top.
After trying rail mounted optic protectors and having them break constantly, I decided to make a mount for the front of my Sig Romeo MSR to attach a 6mm thick, 29mm diameter polycarbonate lense. This lens was custom cut, so I don't expect…
An external housing to wall-mount the Apollo Automations MSR-2 mmWave presence sensor in a corner, with 30º downwards tilt. This align with the vendor's recommendation to fix at 1.5-2m height. I filleted the back to allow for a bit of…
This plunger can be 3D printed in order to replace the Fuel Plunger Assembly because you cant buy them anymore. Just so you know, ive never tested the leather or rubber cup holder because I dont have spares.
This is a pour spout for Sigg / MSR bottles. It's based off a few old pour caps I remember my dad using when I was a kid. Features Separate air intake and liquid exit holes Universal fit for Sigg / MSR bottles There are two variants: V1:…
print in tpu if you try it in something not squishy, leave us a comment and let us know how it does dial in your settings because stringing on this print is a pain in the booty cheeks to deal with and is annoying to look through. BB…