1025 modeli
Another fabric coaster. This time circle shaped and inspired by sunflower seeds arrangement. It is surprisingly very flexible and addictive to play with. Just be careful not to put your thicker fingers deep in the center, it's quite…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
The Sunflower Windmill - Self adjusting Sunflower wind turbine Link to the Official Ball Bearing Mod Information about model maintenance: Due to the considerable administrative effort involved in managing models across different…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
A three piece sunflower cookie cutter. The three piece design allows you to achieve the desired impression depth in the middle part regardless of the thickness of the dough. Or you can cut out the center part completely and swap it…
Wydruk około 3,62 €–4,42 € nettoWstępna wycena jednego wariantu
I have been planning to make this model for a long time, the model complements my existing sunflower fabric coaster ( https://www.printables.com/model/285153-sunflower-fabric-coaster ). The holder should hold 4 to 6 coasters. For better…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
After a lot of iterations, I present you a well working, simple to print and comfortable to play Nose Flute! This instrument is as easy to play as it gets, therefore it's also suitable for beginners and childs. It includes 3 holes. The…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Printed in PETG in various colors , some parts 0.3mm layer to reduce time ,hands 0.2mm layer, all parts without supports . The link between petals are printed using Tansparent Petg , needed to avoid petal movements The total width of the…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I got asked if I can make the logo so that it can be placed on a table or something. Made some changes and only tried printing the connection between the parts. For me it was a snug fit that should work to hold it together but you can…
Wydruk około 6,46 €–7,90 € nettoWstępna wycena jednego wariantu
Un nuevo diseño inspirado en: https://www.printables.com/es/model/678105-pistachiopeanut-bowl El diámetro es de 160mm , suficiente si los imprimes al 80%, en las fotos aparecen impresos al 100% y al 80%. Los archivos gcode tienen letras…
Wydruk około 2,29 €–2,79 € nettoWstępna wycena jednego wariantu
Easy to make a cute Sunflower keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Original of this model is made by Dariam and it is decoration which you can put in the flower pot.
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
I made a set of the coasters for my mother in-law and designed an upswept holder to give it more of a flower look. Just a small enhancement to display the amazing print already designed by rorys3D. I set it to concentric and got a great…
Wydruk około 3,28 €–4,01 € nettoWstępna wycena jednego wariantu
If you have a Google Home Mini, you need it ! The base is a fresh lawn, easy to maintain because it does not need to be watered. The bright green color gives a feeling of well-being and calm. Even the stem of the flower has a shape that…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Hi Fellow Creators, I wanted to upgrade my old Ender 3 Pro with Dragonfly Hotend BMS. There was no appropriate Fan Duct so I create one, and now I'm sharing it with you. Dragonfly Hotend is low, and take a lot of space, so the fan is thin…
Wydruk około 0,75 €–0,91 € nettoWstępna wycena jednego wariantu
Dies ist eine Bienenflucht, sie wird verwendet um kurz vor der Honig-Ernte die Bienen aus dem Honigraum zu halten. Ihr müsst euch diese Datei drucken und zusätzlich noch ein Holzbrett nehmen und dieses auf euer Kisten-Maß zurecht sägen.…
Wydruk około 3,24 €–3,96 € nettoWstępna wycena jednego wariantu
Wall art: Sunflower
Wydruk około 1,86 €–2,28 € nettoWstępna wycena jednego wariantu
Good addition to the influence tracker I designed before. Printed on MK3 i3 with Prusa Galaxy Black PLA. 3mf file included: base with rectilinear infill and no top, bottom solid layers.
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
This is the second version of the Sunflower. A little bigger and with improved petal connection. 29.01. Update: I upload a new STL for "Girasole 2.0 - Centro" Delete and don't print the old STL. EU and UK* Version Sorry for the…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
I designed sunflower in Ukrainian colors to give it out to express support with Ukraine. The two pieces click together with moderate preassure. Just add a safety pin and secure it by moving the slide to locking position.
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
I printed several sunflower fabric coasters and needed something to hold 'em in. Pattern subconsciously inspired by some storage crates I had lying around. I made the coasters glow in the dark for late night table protection!
Wydruk około 3,74 €–4,57 € nettoWstępna wycena jednego wariantu
It is identical to the awesome original except every piece can have its own color.
Wydruk około 2,56 €–3,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I had to adjust the hour and minute hand's holes to snuggly fit the clock mechanism that I bought on Amazon. Figured this will save someone the time it took me to tinker with this. Here is a link to the clock mechanism I bought (5/8):…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The conflict pawn for the game 7 wonders duel. I printed it with a 0.25mm nozzle and with prusament PLA lipstick red, which looks a lot like the original.
Wydruk około 0,71 €–0,86 € nettoWstępna wycena jednego wariantu
Игла для надувания фитнес-мяча
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
Nistkasten für Meisen mit abnehmbaren Deckel, Belüftungslöcher im Boden, Befestigung mit Draht oder Band am Baum, einfach um die Nippel außen wickeln, um den Baum, Pfosten etc. legen und an der anderen Seite befestigen. Deckel wird…
Wydruk około 22,22 €–27,16 € nettoWstępna wycena jednego wariantu
MAGNET TO STICK THE NFL LOGO ON THE FRIDGE It has a hole on the back side to place two 7mm magnets. It was printed with a mk4 with mmu3
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
Habe einen Halter für die Leerbehälter von DM gezeichnet. Wir haben ihn mit Klettband an eine Boxio Wash angebracht. Wenn es mal eng wird kann der Behälter einfach in die Boxio gelegt werden.
Wydruk około 6,09 €–7,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Soporte creado para la bicicleta optimus aquila y el inflador Beto 2 way pumping se crea con espacios para que ajuste el tornillo con cierta holgura.
Wydruk około 5,22 €–6,38 € nettoWstępna wycena jednego wariantu
The Rokit Up is a fairly compact inflator, but the hose is easy to lose if you don't want it poking out of the top all the time. This clip sticks to the back (it's 24mm wide, the same as a roll of 3M tape), and keeps the hose safe.
Wydruk około 0,43 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prusament Spool Sunflower: For the Prusament Spool Upcycling Contest I thought to make a design that can be adaptable. My idea is a Prusament Spool Sunflower that can be a Wall Mount Clock or an Outdoor Windmill. The Hexagons on the…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
This is for the one Person who might have the same problem as me. You dont need any support while printing this. If you are not sure if this is the right one, this is the one I bought:…
Wydruk około 4,29 €–5,25 € nettoWstępna wycena jednego wariantu
stackable storage box with japanese influence update · added STLs photos show printed in matte black pla and brick red petg-cf 0.16mm layer height 20% adaptive cubic infill no brims or supports the top section (in brick red) has different…
stackable storage box with japanese influence #2 update · added the STLs, including 2 new grid options (grid 2 and grid 4) photos show printed in matte black pla and brick red petg-cf 0.16mm layer height 20% adaptive cubic infill no brims…
influx · vase modern minimalist vase design in two sizes dimensions in mm: 240m height version ~ x: 164 · y: 164 · z: 240 180m height version ~ x: 123 · y: 123 · z: 180 note: the included print profile is not optimised to be water tight,…
The Voronoi patterns flash contest immediately made me think of insect wings, and so this dragonfly was born. This snap-fit model features posable ball-jointed wings and an elegant display stand. Print Settings Print files are divided…
ATTENTION: as of 1/21/2026, The Phoenix FPV Drone has been "modernized" to compete with my other 5" drone, the Leopard. Though I maintain that the Leopard is slightly tougher, and the Dragonfly is slightly lighter, you need only choose…
🎄⭐ Print as is, no supports and layer-height .15mm (the lower, the better, as it results in more stable overhangs. More than .3mm and model will not slice correctly), 100% infill. Also you might need to slow down your speed as this model…
Bring a little light to someone's day with this delightful sunflower. It is designed so you can add a single color change so it's easy to do even for printers without multicolor function.
This is a fantastic phone stand design, easy to print and looks sharp, I decided to personalize it with NFL team logos. below you will find the stls separated by division. Please download the pinstripe file from the original creator here:…
this pack add dragon fly wings on your dummy 13 figurine
This is a dragonfly pendant that I designed. It was done with a Celtic style weave in the wings and tail. I printed with a couple of filament swaps to make the weave detail more prominent, and used silk PLA to catch some extra light. Enjoy.
Ball used from AmazingDesign: https://www.thingiverse.com/thing:431829
I wanted to create a dragonfly model since my daughter and I found a dead dragonfly this summer. The overall proportions are based on the one we found. I tried to create a pattern for the wings which is similar to the real thing but with…
This is a digital 3D printable kit card of Dragonfly! Kit cards are fun, all-inclusive 3D prints that are printed flat and then assembled. This compact, 3D printable design combines the concept of a postcard with the joy of 3D printing.…
For 2 years, I have had the model "Sunflower Windmill" uploaded. It was showered with likes and won first place in the Floral Design Contest. Back then, I already provided a simple mod for 608 ball bearings for my Patreon members. Now I…
Made this simple conversion to be able to keep the M18 Inflator stacked on a Milwaukee Packout. The rubber feet can be reused with an M4 heat set insert and a M4x10 screw. UPDATE 5/18/24: If anyone is interested in purchasing the print…
The petals for this sunflower are printed flat and can be shaped after printing with a little heat. The sunflower is the national flower of Ukraine. https://youtu.be/PvxHaFnjXZA Printing All parts can be printed without supports. Petals…
Once you print the sheet you have to break the thin tabs that hold them together and then you can assemble them as a puzzle. If you need a cheat to figure out how to put the pieces together correctly you can watch the assembly animation.…
A blank, matte-white model of a cheerful sunflower, ready for your colors. This DIY collectible captures the bright, simple beauty of nature in a smooth, minimal form—perfect for adding a touch of creativity and warmth to any space.
inflect · vase modern minimalist vase design dimensions in mm: 220mm height version ~ x: 121 · y: 121 · z: 220 175mm height version ~ x: 97 · y: 97 · z: 175 note: the included print profile is not optimised to be water tight, if that is…
Universal Clamp for Windmill -> New Heavy Duty Clamp On the top Site it has a hole to fit perfectly the rod from Hexagon, Toroidal and easter Egg Windmill. Use the screw clamp to securely attach the wind turbine. For example, to balcony…
As I created the Lucky 13 version I was asked if I could add a version for the Dummy 13 so here it is! No supports required.
This filter cleaner cleans the filters of inflatable hot tubs inside and out! Fits standard garden hose click-on systems (compatible with Gardena and similar brands). Dimensions: Diameter 4 cm Needs a 1/2" O-ring Print settings: Walls…
Polymaker Matte PLA Filament 1.75mm Army Red is a good color match for Milwaukee Updated 1/20/24 - removed a small hole artifact from the middle. Thanks to @MatthewSlay for the heads up. Also added a STEP file
Watch here: https://youtu.be/39pGLfgecXs It's finally time we add another model to our Plants vs Zombies shelf. Citron and Peashooter were getting lonely, so I created the Sunflower to keep them company. I created the model in ZBrush. I…
A funny desk item that is ideal if you have annoying work colleagues that disagree with you on everything. Printed in PLA with color change enabled in Prusaslicer. Grenade prints in several parts only the top part will need supports.…
Designed for injection molding, but you can 3D print it too :) Use 0.15mm or 0.10mm layer height, since the model is 1.5mm tall/thick. Support If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Plants vs Zombies inspired, Sunflower, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other…
An NFL Logo with different layer heights for the different colors.
inflatable benchy it has all the features of the original (except for the text underneath) warning: don't try to inflate it, it won't work :) you can modify it as you like, but just respect the license. I printed mine (on the photo) in…
Step into the world of high-stakes adventure with my 3D printed Balloon-Powered Boat - a vessel that not only boasts a sleek design straight out of a James Bond movie but also features an easy inflate function for instant action on the…
This is a Sunflower that is compatible with my springy flower collection found here: https://www.printables.com/model/1100526-springy-flower-collection-update The springy dirt snaps into the planter, the stem screws into the springy dirt,…
Dragonfly Earrings 0.10mm DETAIL Change color to 1.7mm
Best at this size, going too small loses detail. Created in ZBrush.
A sunflower for Valentine's Day. You may also like the whole Valentine's Day collection here . Enjoy and happy printing!
Hang your Milwaukee Inflator on the wall and make it more available.
Fixed the Chiefs logo to include the black outline in the letters. **If you see gaps in the slicer, try switching to Arachne wall generator under the Orca Slicer** All files for each team. Each team is split into different components that…
Sunflower Windmill inlay cover I get some request for a single color opportunity of my Sunflower Windmill . I came up with this easy solution. Just print the cover inlay in black and press / glue it into the yellow printed sunflower…
If you have no idea what Hueforge is look here You need something like black, then brown, then yellow, then white for this. I used a sort of dark red as the 2nd colour, worked ok. I used bambu studio and an X1C/AMS but you can use…
A different style of tic tac toe board game sunflower and bee's game pieces Print instructions Easy to print no supports needed can be scaled down files are for 350mm machine print 1 board and five of each game piece the bee's are 2 color…
My kids lost the outer ring on their dinosaur Halloween costume during trick or treating. It happened due to the fabric stretching from around the fan and letting go. I found this print and then modified it to be a larger hold area to…
See the following link for video demo. See assembly instructions in photos. Adjust the offset angle between the cams to change the configuration in which the wings flap. Design intended for .4mm nozzle and <.3mm layer height. Use organic…
This is a dragonfly I created in Fusion 360 for a decoration on our fence. I am currently printing them out now, 1st one came out great, on to the second. The print time is around 24 hours when increasing the size by 216.5% on a Creality…
Moin Moin, here is my NY Giants logo. Have fun with it! :) Print settings are: Nozzle 0.4mm Layer height 0.2mm Filling 20% Walls 3 Lid top + bottom 4 ________________________________________________________________________ Moin Moin, hier…
Scale to your liking. Pretty Delicate piece so be careful handling.
✨The multicolor 3MF files for both the normal version and the keychain version are now available on my Patreon! 🎨 ⏳ Don’t wait too long—become a Merchant Tier member by February 28, 2025, to get them for $0! 🚀By supporting my👉 Patreon 👈,…
These fun and functional pool floaty coasters are for your enjoyment! Print with minimal infill and variable layer height for low weight and high resolution top/bottom surfaces. The base can be printed with typical settings like:…
The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…
At the intersection of innovation and function, we proudly present the Elegoo Neptune 3 Pro FanFlow Fortress Extruder Cover, a testament to precision engineering and performance enhancement. Designed for the discerning 3D printing…
This page contains the instructions and files for printing and assembly of the throttle quadrant module. (electronics and other details for the whole unit on main page “ OpenFlightSimConsole base ”) Fusion 360 model is provided for anyone…
Filament Type: PLA Nozzle Size: 0.4 mm Layer Height: 0.1 - 0.2 mm Print Speed: 40 - 60 mm/s Infill: 10-20% Nozzle Temperature: 190-210°C (for PLA) Bed Temperature: 50-60°C (for PLA) Bed Adhesion: Use a brim or raft if needed for better…
Steampunk Dragonfly Figurine
Can I fly with you on your trips outside of the garden??? Made with love, for everyone who would like to feel a bit safer out there. Printed in golden e-Sun PLA on the Anycubic Kobra 2. I advise setting the infill at 70-100% to give it…
🌻 Design Concept This sunflower coaster brings a burst of sunshine to any table with its cheerful design and charming details. It’s both practical and decorative – the perfect blend of function and joy! ☀ Purpose Ideal for summer vibes –…
This is a replica of a 2019 NFL helmet with a Carolina Panthers logo on the side of it. Prusa's can make it about big enough for a house cat. Larger build areas make it possible to wear the helmet. Print instructions V2 added with thinned…
New design, assemble your cyber dragonfly, and we recommend using color printing! We have separated the wings, so if you have a multi-color 3D printing system, you can try combining the model for printing. We recommend using a body with a…
Dragonfly with 2 versions if you use the g-code please note that it is using a .2 nozzle. In general, this model works better with a .2 nozzle. Please check your slices before printing with a .4 or above.
Model with or without additional articulated tail Update: Added redesign model and stand version2 To print in place without supports Ball joints: head, wings and tail Include stand Tip: Once printed, to loosen each joint first moves…
I loved the Lego Inspired Flowers by 365Prints and wanted to create a flower of my own. After searching through my daughters Lego bins, I found a couple of bricks that I liked. This model resembles a Lego Sunflower scaled up roughly 500%…
This product contains the 3D model in OBJ file format only. The OBJ file contains the high-detail geometry mesh. It does not include embedded colors, textures, or materials (MTL), providing a versatile base for custom finishing, painting…
This Dragonfly artwork prints without supports. I would advise printing at 0.3mm layer height. You should be able to see the strings in the slicer preview (in Bambu Studio set wall generator to Arachne). You can achieve the change in…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Plants vs Zombies inspired, Twin Sunflower, Tabletop DnD miniature 25 mm medium base which can be used for DnD and…
Model of inflatable Heavy-Duty Boat
Mini Panflöte - Schlüsselanhänger
After creating my piranha plant design, I was on a kick to put together another loved video game plant. You could probably guess where I got the inspiration. I designed the eyes to follow you, no matter where you’re standing in the room.…
Sunflower Fairy House – Whimsical Garden Magic Bring a touch of enchantment to your garden, shelf, or fairy village with this delightful Sunflower Fairy House ! Bursting with whimsical charm, this flower-shaped home is adorned with…
Coraline Dragonfly hair clip base for a Halloween costume a friend was creating for her little sister.
Just a sunflower line art test that makes a pretty decoration for a wall, mirror, desk, or anywhere really! FYI: You may achieve better results if you use Arachne wall generation. Are you interested in selling your prints of my designs?…
Sunflower 3D printed Yard art Print 2 of the sunflower black and one of the solid Yellow background glue together Pole mount using pole mount. DXF for laser cutting included Cut out and paint Print Settings Printer Brand: Creality…
![NFL Raiders Logo [UPDATED]](https://media.printables.com/media/prints/152477/images/1433724_922d1b5e-3fab-4447-bd0a-94cd3eaf200a/3d-print-raiders-logo.jpg){kind=logo}
