59 modeli
Modèle fait sans support, sans bordure et sans vis . Peut être imprimé sans MMU3 Model made without support, without border and without screws. Can be printed without MMU3 15 % PLA / wood
Wydruk około 3,74 €–4,57 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Preview images rendered in Blender Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim…
Wydruk około 41,83 €–51,12 € nettoWstępna wycena jednego wariantu
Here's Johnny! A spooky-fun 3D model of Jack Nicholson from The Shining , capturing his iconic wild-eyed grin straight from the door scene. Designed with AI tools for fans of horror, cinema, and cult classics. Perfect for Halloween prints…
Rick-ornichon de la série Rick & Morty -Sculpter sur Nomad Sculpt-
Un nichoir a oiseaux en trois parties vissées entre elles, on peut le fixer autour d'un arbre ou d'un poteau. On peut faire le toit d'une couleur différente et on peut dévisser le fond pour le nettoyer. Vous pouvez regarder la vidéo…
New version of my previous file handle design. The old version didn't fit in the hand quite as well as I would like, specifically it felt a bit too slim overall and the area around where the thumb and index finger grip was not quite…
Saint Nicholas Mitre / Sinterklaas mijter 3D model voor sinterklaasfeest. The Saint Nicholas Mitre (mijter van Sinterklaas, Mitre de Saint-Nicolas, Mitra Świętego Mikołaja, Mitra Svatého Mikuláše, Szent Miklós püspöksüveg, Mitra di San…
Nichoir à mésange bleue, le diamètre du trou est de 28mm. Le nichoir est en 2 parties, le toit coulisse pour accéder à l'intérieur du nichoir pour le nettoyer en fin de saison. Le Toit est imprimer en PETG et le corps du nichoir en PLA.…
Saint Nicholas Staff / Staf van Sinterklaas voor sinterklaasfeest. Has a flattened side for easier printing. The Saint Nicholas Staff (staf van Sinterklaas, Crosse de Saint-Nicolas, Pastorał Świętego Mikołaja, Berla Svatého Mikuláše,…
Modèle de nichoir à rouge gorge en 2 parties pour avoir le toit de couleur différente. Il est à imprimer sans support, la partie nichoir posée à plat sur le bas et la partie toit a poser sur la partie plate de l'arrière. Les 2 parties…
If you like the model, you can support me by nominating my profile or this model. Thank you! Thank you for downloads, likes… Enjoy !
simple handle for a 10 inch Nicholson file. model loaded super tiny. Rescale the model to 2,500% for proper size, or find your liking for your file. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter…
Nichoir pour mésange à imprimer en trois pieces principale . Adapter pour une rembarde de 80 par 40 mm Support d'impression seulement nécessaire pour le chapeau.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Sunlu Meta Grey PLA+ Esun Bone White PLA Control3d White Swap Instructions: Start with Black At layer #9 (0.8mm) swap…
LEGO & DUPLO Compatible Saint Nicholas Staff / Sinterklaas staf. Can be used with Lego or Duplo. The Saint Nicholas Staff (staf van Sinterklaas, Crosse de Saint-Nicolas, Pastorał Świętego Mikołaja, Berla Svatého Mikuláše, Szent Miklós…
Les 2 parties principales sont liées avec des colliers colson, prévoir une tige métallique pour assembler le toit avec la partie haute (pivot)
Needed some file handles, the dimensions were measured from off the shelf Nicholson files. The handles were epoxied in place after printing. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: ANY…
Petit remix du modèle original pour avoir Rick cornichon (Rick-ornichon) en porte-clé ! Taille réduite, base plate et ajout d'un anneau. Impression sans supports. Imprimé en PETG / Buse 0.4mm / Hauteur de couche 0.15 mm…
Přívěšek Mikuláše například na pytlík s dobrotami pro hodné děti. Výška 65mm Zároveň i verze bez očka na hlavě Čert a anděl k dispozici v následující kolekci: “Mikuláš” https://www.printables.com/@anthancz_1533299/collections/1776399
This is a transport case for the Minichord. Thank you to pauliemakes for the Not So Rugged Parametric Box I used as a basis. The box fits the Minichord perfectly; it can also be played and charged in the box. It is recommended to print…
A cookie dough cutter. 14 cm high, should print two “cutting” layers with a standard 0.4 mm nozzle. One layer however is fine for a dough cutter, too.
It's still a cookie cutter. Just be aware of the possible health risks that come with 3D printed items intended for contact with food. Something to read up on if you dont know what im talking about :…
A public domain scan of the uniform worn by Nichelle Nichols in the role of Lt. Nyota Uhura in the original series of the television show Star Trek. The garment is part of the collection of the Smithsonian National Museum of African…
Hey everyone! 🎨✨ The model can be printed in up to 7 different colors! 🌈 This is a fantastic opportunity to let your creativity blossom and create something truly unique. Each color will add a personal touch to your creation and enhance…
Nichoir a balcon pour oiseaux 7 pièces, Cote dimension total 250 x 116 x 200
a picture of orthodox version of saint nicholas
Voici un beau nichoir pour vos mésanges. Il suffit d'imprimer sans support les deux parties qui s'emboîtent l'une dans l'autre. L'avant du nichoir se retire si nécessaire pour le nettoyer ou y retirer le nid construit. A l'arrière, il y a…
This handle is designed for an 8" Nicholson file. Attaches best if the tail of the file is warmed up before this handle gets pounded on. I recommend at least 3 walls and a decent infill, but print at your own discretion. No supports…
This detailed 3D printable figure captures a majestic, bearded Winter King, often reminiscent of Saint Nicholas or Father Frost. ❄ Clad in robes decorated with snowflakes, he holds a staff topped with a snowflake and a lantern. This model…
I got a used Nichols Electronics Digital II music box, but it was missing the knobs. These are replacement knobs based on the dimensions of the knobs I had on my Nichols Electronics Digital. You will need a printer capable of dual…
Voici un beau nichoir pour vos rouges-gorges. La partie avant s'emboîte dans la partie arrière ce qui permet de l'enlever pour nettoyer le nichoir ou d'y enlever le nid. Les deux parties s'impriment sans aucun support. Le nichoir peut…
Sabonoteira para nicho de banheiro, tamanho 10cmx35cm
John Joseph “Jack” Nicholson — Bust This 3D-printable bust depicts John Joseph Nicholson, better known as Jack Nicholson, one of the most iconic figures in American cinema. An actor of extraordinary charisma, he made film history through…
Saint Nicholas, Angel & Krampus – "Color Me!" Edition (11 cm) A beautiful holiday set of detailed figures featuring Saint Nicholas, an Angel, and Krampus, ready for you to creatively paint and bring to life! This set is part of the "Color…
"St. Nicholas + Devil + Angel" Cookie Cutter + Stamp set Cookie cutter is made of 2 parts - cutter and inner stamp. Parameters: St. Nicholas Stamp - 43mm x 69mm x 4mm Cutter - 51mm x 78mm x 12mm Devil Stamp - 50mm x 61mm x 4mm Cutter -…
nicholas pok'emonball
Gridfinity 1x4 Storage Bin for Nicholson Universal Handle
I used Ben Poilve's open source keycap file and added labels for the chords. His original keycap can be found on this github here: https://github.com/BenjaminPoilve/minichord/tree/main/hardware/3D/keycaps
Hello, I tried to print some pieces but the slicer was not having it so I tried to thicken the spots.
modèle de nichoir, principalement pour le petits oiseaux (mésange, moineau, queue rousse, ...). ce nichoir à une petite entrée et un fond démontable pour le nettoyage. Il s'imprime sans support à l'exception de l'entrée. penser à le…
The characters have been inspired by their paper-puzzle originals from ABC magazine that was issued in 1978 in former Czechoslovakia. These models were usually filled by sweets or nuts and placed in the corner of the windows. The magic of…
Student design from Teen Maker Hour. Created using https://doodle3d.com/
Feeder: St. Nicholas Who’s hungry? St. Nicholas! 💚 Take care of him and feed him what he likes best—a food. The Hungry Animals game turns ordinary play into a little adventure full of discovery. Children search for the right food for each…
[CZ] Vytvořte si doma sváteční atmosféru s tímto detailně propracovaným Mikulášem na LED svíčku. Model má detailně tvarovaný plášť, vousy i mitru. Na spodní části pláště jsou výřezy ve tvaru hvězd a stromečků, kterými jemně prosvítá…
Celebrate the traditional Dutch and Belgian Sinterklaas season with this vibrant, multi-color hanging ornament! Designed inside a sleek hexagonal frame, this cheerful depiction of Saint Nicholas features his iconic red and gold miter,…
St. Nicholas cookie cutter 135 mm; Mikuláš vykrajovátko 135 mm
Any feedback would be greatly appreciated . Preview images rendered in Blender Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim…
Wydruk około 41,83 €–51,12 € nettoWstępna wycena jednego wariantu
Modèle de nichoir à rouge gorge en 2 parties pour avoir le toit de couleur différente. Il est à imprimer sans support, la partie nichoir posée à plat sur le bas et la partie toit a poser sur la partie plate de l'arrière. Les 2 parties…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) ABSRACT NICHOLAS SCULPTURE…
CORNICHON | Pickleball rackets set, fast print Beach days are coming! Fast-print your set of pickleball rackets to show off some skills with style at the beach or at the park! They come in 3 sizes , to accomodate most printers. The paddle…
