Nikon fmount lens to MFT m43 camera body
Print in PETG for complient flex of the F-mount print in BLACK to absorb any stray light. Have fun big hugs bye
- Pobrania
- 537
- Polubienia
- 34
- Ocena
- 5
807 modeli
Print in PETG for complient flex of the F-mount print in BLACK to absorb any stray light. Have fun big hugs bye
Custom flash diffuser for pop-up flash of Nikon D7200. Since version 2.2 it will fit other cameras as well due to the sliding slot: you only need one M3 nut and one M3x8mm screw. I used this fantastic design for the flash mount, many…
A cover for protecting a spare Nikon EN-EL15 (or compatible) battery based on a great cover by @PiJey_88387 enhanced to also cover a USB-C charging connector found on a Jupio EN-EL15C ULTRA C battery. Printed in PETG with 0.2mm layer…
[EN] Replacement of the inner part of the case buckle for Nikon Nivo 5.M/Focus6/Focus8/Trimble M3 total station. Tested on Nikon Nivo 5.M case only - see photos. The entire buckle including this inner part can be ordered at…
Sady vykrajovatek pro vykrojeni dilu na pernikovou chaloupku.
Small icon of St.Nikolina,monastery Nimnik
What else there is to say? It's a lens cap for the Nikon F mount. You always need one more. Print Settings Rafts: No Supports: No Resolution: .20 Infill: 100% Filament: Filament PM PETG Black Notes: Prints without supports. Extra…
This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…
UPDATE 20230818: v2 has improved fitment! Designed for Nikon FE2 but might fit other F style bodies! I was tired of all the printable dust caps being less than ideal for printing. I designed this cap from scratch by measuring the body and…
The Ender dog (SDcard gcode) without base or if you prefer Niko the puppy without dog house. (see the image, the Creality gcode clearly has the Makerbot imprint there so i refer to the original ) I've attached the gcode (with base) too,…
When the 4x microscope objective available from “Reakway” is mounted 150mm away from a camera's sensor, it works wonderfully for photography, covering a full-frame image sensor with a nice sharp image. You can find my standard…
I got a request for a Kalashnikov ammo box. The spacing is 50pcs/11,80x57,215mm between the insert top and bottom. You gonna need 8pcs/M3x20mm for the Latch and Hinge. Hope you like it.
Remixed bodycap for nikon dslr and slr bodys. Thanks for Physics Dude for original model.
Printed in PETG at .20mm slicing on a prusa mk3s+. The battery is shaped for the larger EN EL-3e battery. But will still fit the more common and smaller EN-EL15. It should fit a 70mm diameter by 3mm thickness O-ring if you would like to…
Nikon Nikkor Z Rear Lens Cap, original looking but slightly shallower (just because it was not necessary since my design has flat top). Tight fit so it sits secured. Original measurements so it protects whole width of flange. If you like…
I found an old Carenar lens with a M42x1.0mm threaded mount (not to be confused with T-mount which is a M42x0.75mm thread) that I wanted to use with my Nikon DSLR, but the only adapter I found claimed “INFINITY Focus NOT ALLOWED.” This is…
Cover for the mount side of Nikon lenses. Tested with: AF-S NIKKOR 16-80mm 1:2.8-4E ED NIKKOR-S Auto 1:1.4 f=50mm NIKKOR-Q Auto 1:3.5 f=135mm Rokinon 1:1.4/85mm AS IF UMC Designed in FreeCAD Print instructions Print with the open side up.…
The great Serbian-American inventor Nikola Tesla has had a huge impact on 20th Century science and technology, espeically his contribution to electricity supply system via alternating current. Isn't it great for him to have his back and…
This camera grip is designed for Nikon SLR film cameras. Confirmed to fit: Nikon FE Nikon FE2 Nikon FM Nikon FM2N (More to be tested) Through many MANY iterations and changes, here are the final features of The Printed Grip: Improved…
Adapter to attach a Nikon camera to a focuser for prime focus photography. Print instructions Unlike the example in the photo, you might want to print this in a matte black material to avoid reflections. Print Settings No rafts, no…
Look at those two sample pictures! Wow! You can now give any Nikon F-mount lenses or adapters a super macro super power! UPDATE: Added a new retention ring for lens-side mounting. No tools or rubber bands needed! Just snap it onto any…
Replacement covers for Niko switches/outlets in the EU. Niko parts are very expensive. Especially if you want a different color from white/cream. **Triple one can only be used horizontally as verticals are sized differently** Clicks in…
A box for your Nikon Z needs. Neatly stores 4 Nikon EN-EL 15C batteries, 4 XQD/ CF-Express B and 4 SD cards. If you want it to seal, use a piece of 1,75mm TPU filament, cut it to length and join the ends with ca glue, for example, to…
1 & 2 Nikon EN-EL15 Battery Protection Case
A pinhole "body cap" for Nikon Z-mount. The printed parts are just the holder for the actual pinhole, you'll have to make one or buy one on Ebay (I got mine from fireseller66, a .15mm). Printed in black PLA, it's completely light tight…
Battery Cover For Nikon EN-EL15 Motivation For some reason I tend to lose the battery covers of my EN-EL15 Batteries. Therefore I designed a replacement. It was also a Test for printing with (semi-) flexible material on my i3 MK3. In the…
The newest version of my Lens Cap Holders. Now with more supported filter diameters. The following diameters are supported: Canon: 49mm/58mm/62mm/67mm/72mm/77mm/82mm Nikon: 52mm/55mm/58mm/62mm/67mm/72mm/77mm/82mm Nikon (extended):…
Celebrate the legacy of a true visionary with this stylized 3D printable bust of Nikola Tesla , the brilliant inventor and master of electricity. With a sharply defined face, slicked-back hair, and intense eyes full of ideas, this…
I am a hobbyist camera repairman. I have worked on more than 50 Nikon F3 bodies and 80% of them are missing the motor drive cover. However, the motor drive opening needs to be light-proof and I decided to get this cover 3D modelled. They…
Nikon F mount bayonet. This is the camera bayonet, so you can attach lenses to it. This is not the common cap bayonet, it is oriented like the one in the camera, so you can attach lenses and adapters only in the right position. You can…
Hey there! I made this parametric lens cover in fusion 360 for my girlfriend's camera (Nikon D3100). I could copy this lid due to the lucky fact that my brother has the same camera! However, taking into consideration that this original…
I took the model from @PhysicsDude and made a few sizing modifications to have it be snug on my camera
Recreation of the Nikon F-mount. Can be used to design accessories such as adapters or macro rings.
These back door latches at the Nikon F100 tend to break off. Unfortunately, the latches are made directly from one piece of plastic with the housing of the door. The new latches are glued. I printed with ABS and used a two-component epoxy…
This is the starting point for another design - but figured it might be useful in case you lost the one that came with your camera. It might fit other cameras as well, but I only have the one at the moment. If others could print and…
This product is a 3D printable replacement latch for the Nikon F80 camera's back door. It offers a durable and precise s
The exposure memory lock button for the Nikon F3 SLR film camera. These things are known to break and fall off the body.
I recently bought myself a Nikon Z camera with the idea to adapt a lot of old and strange lenses. Since I didn't want to buy an adapter for each and every one of those (there isn't even one for some of them) I wanted to go with a printed…
Exactly the same as the LF-1 Rear Lens Cap
The goal of this project was to prove out the feasibility of a 3D printed lens hood. I purchased a Nikon 50mm f1.4 from KEH that did not include the HB-47 lens hood so it was a good first candidate to prove this out with. The measurements…
infill 100% recommended.
This is a replacement for Niko outlets and switches (EU outlets). Make sure to check the size in the second picture! A step file is also provided to adapt the model to your needs. In my case, I cut part of it off to fit next to a kitchen…
I wanted to mount my DSLR to an old Olympus VMT microscope. Found a fitting camera attachment (on ThingiVerse) and made a remix with a fitting cylinder for the microscope. Also made one for a cheap Bresser Microscope (but it doesn't…
Remarkable geniuses have made our world what it is today. I would like to honour these people with aesthetic sculptures and remember them for their genius and contribution to humanity. With this second model of the series you can have the…
Add this grip to your Nikon F3 to improve grip without loosing any of the functionality as all the buttons can still be reached. Camera: This model has been specifically designed to fit the Nikon F3 and has not been tested on other Nikon…
I bought a Nikon F3 SLR camera that was missing the flash PC sync terminal cap. I modeled this one as a replacement. It is compatible with other Nikon cameras such as the F F2 F3 F4 F5 FA FG FE2 FM2 F100. I recommend printing with the…
The original design wasn't adjustable, you couldn't fine-tune it by sanding or adding a shim. Sanding the mount side would cause the lens to get loose. Improvement List: 1- I split the adapter into two parts that screw together. This…
a battery holder for nikon en-el15 batteries
Smaller, stronger and lighter than the original. It perfectly fits in both side with the double snap bayonet, so you can reverse it like the original when carrying in the bag. Print settings 0,2mm layer heigth no supports orientation as…
A quick-release clip for the strap that came with the Canon EOS M50. Just push/pull the clip against the metal fixture facing the gap. I recommend printing in PETG or similar at 100% infill, 3 perimeters. The print orientation makes them…
The DK-25 Eyecup improves viewing comfort and prevents stray light from entering the viewfinder and diminishing contrast. PLA or TPU 0.15mm layer height orientation shown in the last photo supports are required
I removed the magnet as I thought it was unnecessary for this. The intention was for it to act as a slot, rather than a container you take out and put back in.
Nikon Z mount that works quite well with my Nikon Z6ii. Use it to mount a custom lens on your Nikon Z body. Tag me in your remix ! Have fun with it!
I changed it a bit for better fit printed with my Original Prusa i3 mk2. Cleaned the STL a bit so further customisation (Blendfile!) should be easy. I made it a bit longer so that I could ease the printable but insane steep overhang. So…
This adapter allows a strobe to be mounted to a Nikon F3 camera. This is a cold-shoe adapter, so a flash sync cable is still needed between the strobe and the camera body.
Nikon hot shoe mount cover with Z series logo, it's a remix of another creation from a different user, i made the logo a bit higher so it's more visible and more easy to print that part in different color if you prefer it that way. if…
Please give it a like 🙏 Grip for Nikon Zf full frame. -Use fuzzy skin to add texture. -Use a brim on the print plate. -Print in TPU if you want it grippy. -Use 3M double sided tape to attach. Pro version available here:…
This is a few improvements I made for mmsaxer1998's excellent adapters for the Nikon Super Coolscans. The first is a support for the rear spool that screws into the back of the scanner. Created this because I keep having issues with it…
Protect your precious Nikon batteries with this simple and “snappy” case! Printing Use the standard print settings in your favourite slicer. Make shure that “Minimum travel after retraction” (Prusa-Slicer) is set to 1 or lower I used eSun…
This cap is printed in two parts, a F-Mount bottom and a cap. The two parts may be super-glued together before use. I've used PLA, two bottom layers, two upper layers, 0.2 mm layer and 30% infill.
Please give it a like. Threaded low profile hood for Nikor 40mm f2 and 28mm f2.8 Check out my Nikon ZF grip: https://www.printables.com/model/1424562-nikon-zf-camera-grip
This is a useful battery holder 3mf file that utilizes a dummy battery stl from wdwhite and a gridfinity 2x1 template by Zach Freedman I used it to clear up a stack I had. These are not stackable at the moment It's noted in the part…
This insert was made specifically for the 120 x 70 x 40 mm version of the rugged box, that is provided with the model. It can house 2 Nikon EN-EL15c batteries (or other battery not exceeding max dimensions of 56mm x 40mm x 21mm), bellow…
Two types of lens hoods to fit Nikon AF-S 70-300mm or any other Nikon 58mm lenses Category: Camera
Adding Custom Text: Import the cap object in your slicer, or open the .3mf file. Right click the cap object, and select “Add Negative Volume” > “Text”. I find it easiest to position the text from the top view (View menu on top bar > Top,…
I am pretty sure that the last time the battery cover for my Nikon N2020 film SLR was seen was ~10 years ago. It has the optional MB-3 4xAA battery holder, which was kind of annoying to have to duct tape over to get the batteries to stay…
If the ice scraper no longer works, you can hang it on the Christmas tree. Or print without this scratching edge and you'll have a Christmas tree ball straight away. And if you scale them by a factor of 40%, you get nice earrings. Use…
Lens cap for the Nikon Z mount Check out my Nikon ZF grip: https://www.printables.com/model/1424562-nikon-zf-camera-grip
Introduction I like to keep everything in my gun safe tidy and make use of the otherwise unused wall space. Since the safe is lined with fabric, I designed a series of magnetic holders for magazines, firearms and accessories. Strong…
Printed in Prusament PLA Galaxy Black - 0.10mm Detail - Support on the bed only - 15% infill - 5h42 printing.
Edit : added a bigger and more deep “nikola” text version, just use this one. simple to print edit here : https://www.tinkercad.com/things/42O8cLajtgm-telsa-branded
Adapter that lets you use Nikon F mount lenses on Nikon Z bayonet. I tested it with Tamron 70-300mm with no problems. But of course use at Your own risk. Supports are recommended. It is a remix of these two models: Nikon Z base mount od…
Needed a replacement eyepiece for my vintage Nikon FE film Camera, Can also fit other vintage Nikon cameras Printed out of TPU so it wont scratch any glasses. 30% Infill
Use Nikon lenses on the HQ camera (Cmount) Print instructions print at least in 0,1 mm layers. I used a -0,1 horizontal expansion on my Ultimaker2 to get the fine thread to fit, some other printers may need a bit more correction.
0.12mm layer height recommended. Requires Arachne wall generator for thin walls. This adapter works well for me. Let me know how it works on your camera.
A dummy battery for Nikon en-el15, to fit Nikon D7100 camera and others. I've createed this in order to work on other projects. Category: Camera
The film door latch on the Nikon N6006, N5005, and N4004 (F-601, F-401X, F-401) is notorious for breaking. Replacements are often over $10 for a piece smaller than a fingernail, so I modeled one and want to release it for free! This…
Hi, this is my version of the macro converter (revert lens) for Nikon with F mount. It is designed for 52 mm lenses, tested with: Nikon AF-S DX NIKKOR 18-55MM Nikon AF NIKKOR 50mm f/1.8D Part 1: You need to put a UV filter on the one side…
Lens hood, equipped with Bayonet-style connector, compatibe with Nikkor 18-55mm lens. Inspired by lens hood Nikon HB-45.
Another remix of laurent_despeyroux 's deep lenshood, this time to fit everything that Nikon's HB-32 lens hood fits: 18-140mm f/3.5-5.6G ED VR, 18-105mm f/3.5-5.6G ED VR, 18-135mm f/3.5-5.6G IF-ED, and 18-70mm f/3.5-4.5G IF-ED. Used the…
If you have 110 film negatives you will find there are few options to use them in scanners. I have an excellent Nikon Coolscan V which handles slides, 35mm negatives both manually and as strips and APS films. But not 110 film. To…
Bokeh is the way the lens renders out-of-focus points of light, this is reflected in the shape of point sources of light in the background of photos. The bokeh shape is determined by the shape of the shutter, which means you can alter it…
Nikon HB-69 replacement lens hood for the AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR II It is not a direct copy of the original HB-69 as I gave it a more stable mounting method. It still fits both ways and has useful groves for better grip.…
3D printable eyepiece for Nikon cameras replacing the DK-17. I also included a 3D file of just the thread, which you can use as a base for your own custom eyepiece or cover design. Printing recommendations The thread on this part is tiny.…
I wanted a small softbox for my Nikon SB-800 flash that is still small enough to carry it around. The main part slides over the flash head and has also has a hole for a M3 screw and nut to clamp it down if it sits to loose (works great…
Original model: https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/nikolasbabetas/Neopixel_Holder by nikolasbabetas You need to print 4 of the holders, and they fit in the upper extrusion. For full instructions, see the…
This is the spacer needed to attach this objective https://www.amazon.com/AmScope-Plan-Achromatic-Objective-Knurled/dp/B01G4CCGRC/ to a Nikon F-mount camera. Lets you take 4x macro pictures. to read a review of the objective check here...…
Nikola Tesla – Bust This 3D bust represents Nikola Tesla , one of the most influential inventors and engineers in the history of science and technology. Best known for his groundbreaking work on alternating current (AC), Tesla played a…
A Bahtinov mask add-on for my Nikon 200-500mm f5.6 diffraction spike generator meant to assist with achieving perfect focus in astrophotos. It uses the same mounting ring to attach to the front of the lens hood. Print in black filament to…
Might also fit other cameras ? I printed this in TPU95A with the finest settings my printer allows, and it fit perfectly with a bit of a push+screw action when installing. I am also sharing the FreeCAD file in case you want to modify it.…
Extension tube for Nikon F mount. Minimal hardware required only for aperture control. There is a groove on the camera side to allow for the lock to keep it in place, this same lock will with a bit of filament lock the lens as well. Keep…
This is an adapter for the Nikon F2 camera, that gives you a cold shoe mount.
I bought a Nikon FA with the motorized grip, so it did not come with the hand grip. I designed this small printable grip to emulate the original accessary. Fitting is illustrated in the pic. The first time it might be a bit tight. Secure…
This is a reverse or retro adapter to mount a normal lens in reverse position for macro photography. The adapter mounts to a nikon f bayonet mount on the camera side and a 52mm filter thread on the lens. Printed on an elegoo mars resin…
If you not happy with the flange distance, or want to add any other personalization. Feel free to edit. onshape Link
A simple rectangular lens hood for the Nikkor Z 40mm lens. Held on by friction, although I found that if you intentionally add some horizontal expansion on the first layer or naturally get some elephant's foot it clips in nicely and…