Liczymy pasujące modele…
Update 2025/11/16: Inland and Esun have updated their refill spools, so this spool is no longer compatible. A reusable filament spool designed to work with Inland brand filament refill packs. The two halves screw together.…
New version 2.0 Printing The crankcase is printed with support on build plate. Print the piston pins with brim. I printed with PLA+, layer height 0.16 mm. Dimensions 70 x 68 x 50 mm. Weight 0.050 kg. Assembly - Build the crankshaft using…
This is the core 2x2 modular dungeon tile from my Masterful Dungeon tiles system. Each tile features a reusable base and a swappable top. The tile is designed for either magnets (5x2 mm neodymium) or clip connectors. Use it to build…
EDIT 2022-07-17: I've made a new, improved version of this. Consider this obsolete. New model: https://www.printables.com/model/243613-battery-adapter-einhell-power-x-change-general-pur I altered the original thing so that i can use…
These clip connectors are designed to join any tiles in the Masterful Dungeon Tiles system , offering a stable and magnet-free way to connect your terrain. They slide snugly into the slots on the underside of the tile bases and provide a…
These are complete modular wall tiles from my Masterful Dungeon Tiles system. The wall tops are fully compatible with both 2x1 and 2x2 tile bases, giving you maximum flexibility. Whether you're lining a corridor or enclosing a room, the…
This desogn is obsolete, please use new version ! Inspired by OK1RF idea for a rectangular boom profile guaranteed to squareness element mounted to boom with only one screws recesses for nuts diameter identification element Also published…
This is the modular 2x1 dungeon tile from my Masterful Dungeon Tiles system. Like the 2x2 version, it features a reusable base and a swappable top , letting you easily switch between different surface designs without needing to reprint…
Check out the updated and improved model! https://www.printables.com/model/1208568-dewalt-20v-battery-adapter-version-2-x11 ----- Clips on to the Li-ion 20v battery packs from dewalt. Can insert flat wire crimp connectors (the…
Coffee Filter Cone for Generic Paper Filters v.G OBSOLETE, SEE https://www.printables.com/model/1130550 UPDATE: Added version G. My PLA prints worked okay for a few months, but then the retainer ring started to get loose due to heat…
Updated Servo version: https://www.printables.com/model/1407669-servo-linear-actuator-for-motion-platforms Software and source code: https://github.com/vazhure/vAzhureRacingHub Other files: https://disk.yandex.ru/d/nXeUozg8zVPkhw Mount…
THIS BOX HAS AN IMPROVED VERSION: https://makerworld.com/en/models/963939 I am still working on the documentation, please wait to have these parts made if you're not sure what you are doing. If you know what you're doing, go ahead. Get…
*** Please, check the new improved version. This model is considered obsolete and will not receive any update. *** This is a remix of BallardBandit vacuum forming, shaped to fit pro-form dental material. The vacuum attachment are not…
Update 2025-02-10 Created new version from scratch for the Philips Avent models SCD923/26, SCD921/26, SCD973/26. Philips Avent Tripod Mount Philips Avent Crib Holder This is a remix of the tripod mount that was created for the old model…
Update: Somebody remixed a better version with a hollowed-out back. Please use that model instead: https://www.printables.com/model/961122-fisker-ocean-inner-door-handle-insert-hollow This is the inner door handle insert. Some Oceans…
Figure based roughly on FFXIV Viera but with shortened torso and heavier. Arms from the classical statue “The Violinist.” Horns, ears, and trident created in OpenSCAD. Hair is from Rolls Royce hood ornament. Tried to include the net a…
still being made lol
This model is obsolete, here is a link to the V2 model that adds quality-of-life improvements and addresses a big flaw with the latches. Ignore this model and print the V2 design model instead! ---------- A protective travel case for the…
Please go to Remix. A new version is available.( https://www.prusaprinters.org/fr/prints/50588-prusa-mk3s-mmu2s-purge-bucket-_new-version ) //////////////////////////////////////////////////////// 2 versions disponibles / 2 versions…
Dual extrusion extruder with Dual gears, Direct drive, Single nozzle. Design uses BMG gears (Triangle clones), Nema17 Pancake. Integratet 2-in1 Splitter using partially cutted PTFE Tube. Single nozzle, Extruder gears are switchable with a…
IMPORTANT UPDATE Fixes implemented in this model, together with some other important updates, are now officially implemented in the Prusa R6 version, so please use them instead. This model remains here just for reference. Original…
Update 2023-02-05 : I have uploaded a version 2 which fixes the issue with tuning. Use that instead https://www.printables.com/model/390377-french-horn-mouthpiece-adapter-for-cornet-v2 Original description here, for posterity: ------ I…
PLEASE USE THE UPDATED FILE THAT CAN BE FOUND HERE: LINK To use this, Remove the stock frontend, and place in the printed frontend. The collet will grip the barrel and cause it to move less around the priming block, as the stock frontend…
OBSOLETE - Please check my updated model here: https://www.printables.com/model/355610-improved-magnetic-holder-for-pcacrylic-panles I created some holders to be used with my RatRig VCore-3 Printer (check out here:…
Improved version - https://www.printables.com/model/1459315-protective-case-for-gopro-4k-2024-v20 Ensure maximum protection for your new GoPro 4K 2024 with this custom-designed storage case. It's perfect for safely transporting your…
Obsolete: GridFlock now has its own magnet jig, with better compatibility. Instructions GridFlock is a gridfinity-compatible baseplate generator with easy press-fit interconnect. It also features friction-fit magnet slots inspired by…
This design is now obsolete, you're welcome to print it if you want a 1-part design, but I highly recommend downloading the improved 2-part version I designed instead:…
Important note: This project is fairly out of date now. The Taz 6 is no longer being sold, the BLTouch is at version 3 (not compatible with firmware for version 2), and Marlin itself has moved way beyond this version. If you want to view…
Conversion of CR10 V2 to a CoreXY with V-Slot wheels Updated Version - Mostly inspired by V-King/V-Baby Z-Carriage D/C-Bot Hardware: additional 10x 400mm 2020 V-Slot or T-Slot Profiles (some could be longer with minor changes in design),…
I hated how the Suntour Command Shifters are impossible to get & no good mass-produced version is offered. I never used them, but they look very intuitive & like a good design. These are Inventor files, not Solidworks as I'm used to. I…
This is obsolete, now V2 is released: https://www.thingiverse.com/thing:2862044 --- THIS WILL IMPROVE YOUR 3D PRINTING QUALITY! --- ENCLOSURE: https://www.thingiverse.com/thing:2792618 Upon multiple requests I'm sharing this 3D printing…
These are the peg models that I designed for different needs but then I combined them to https://www.printables.com/model/35273 Chunky - the multifuntional peg So these models obsolete, but feel free to use or remix them. They are for…
This is a general stand that can be repurposed as a stand for a tablet with only one single position (or a very oversized stand for a smartphone). This was formerly titled “LabQuest 3 Stackable Stand (Underhand Variant) V1”. This is no…
THIS DESIGN HAS BEEN UPDATED. SEE: http://www.thingiverse.com/thing:737600 This file will print end adapters for 3mm rod for balancing self tightening 6mm CCW and CW blades as used on a DJI Phantom ande others. I used polished 3mm tool…
Cool cyperpunk design for a new print head cover designed to hold a single 5015 fan. The original model has issues with the 3D mesh, this version fixes them, there's no visual or structural differences other than the fixes in the mesh…
This is a general stand that can be repurposed as a stand for a tablet with only one single position (or a very oversized stand for a smartphone). This was formerly titled “LabQuest 3 Stackable Stand (Overhand Variant) V1”. This is no…
Obsolete: GridFlock now has its own magnet jig, with better compatibility. Instructions GridFlock is a gridfinity-compatible baseplate generator with easy press-fit interconnect. It also features friction-fit magnet slots inspired by…
This desogn is obsolete, please use new version ! Inspired by OK1RF idea for a rectangular boom profile guaranteed to squareness element mounted to boom with only one screws recesses for nuts diameter identification element Also published…
This model is obsolete, here is a link to the V2 model that adds quality-of-life improvements and addresses a big flaw with the latches. Ignore this model and print the V2 design model instead! ---------- A protective travel case for the…
![[Obsolete, see description] Battery Adapter Einhell Power X-Change General Purpose](https://media.printables.com/media/prints/98138/images/995211_146f8637-c194-46c0-8805-e848ebb6f784/50b86a246f04e58914ef95d404af139e_display_large_98.jpg)
![[Obsolete] Dewalt 20v Battery Adapter (beta)](https://media.printables.com/media/prints/351190/images/3038696_09ecc3bd-c6f1-46f5-b185-310fe7dd880d/dewalt-battery-clip.png)
![[Obsolete] Philips Avent Tripod Mount](https://media.printables.com/media/prints/390011/images/3260873_8646459d-ac9c-444e-9d56-03743d59b642/img_5736.jpg)
![[Obsolete] Magnetic holder for PC/Acrylic panels](https://media.printables.com/media/prints/229334/images/2088331_9f89fa2b-0e09-461b-b739-e4c1a1cdd2d9/2022-06-21_00h28_53.png)
![[Fixed Mesh] Print Head fan 5015 - Nora's Obsolete Mk-iii](https://media.printables.com/media/prints/cc8eeeea-3c9d-418c-9f3e-a36c841445cd/images/13958672_36f0944b-94c0-425c-966e-3a97f265d874_307c0dc5-8546-4d43-ba4c-15d5c3c38101/01_before_after_front.jpg)
