2486 modeli
Best fit with apple leather case Prints without supports on the side. I added Gcode for Prusa Mini and i3 Mk3s If you want a stand for just the iPhone: https://www.prusaprinters.org/prints/128413-iphone-stand
Wydruk około 2,76 €–3,37 € nettoWstępna wycena jednego wariantu
Airpods Pro Case with the Google dinosaur
Wydruk około 9,53 €–11,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Combined Stand for iPhone, Apple Airpods and Apple Watch. For Wireless loading an IKEA NORDMÄRKE QI-Charger is used. Works great with iPhone 8 and iPhone Xs (also with original Apple Case). For Watch and AirPods the original loading…
Wydruk około 17,24 €–21,07 € nettoWstępna wycena jednego wariantu
This is a little charging station for your AirPods (2nd Gen/Pro). The pegs at the back are to push out the case once the AirPods are charged. Almost all of the pieces are friction fitted, but you can put some glue on the visor and base…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
After downloading and printing an airpods/watch dock from thingiverse, I recognized that the hole for the watch charger was to big. so i decide to designed one from scratch and decided to share the fusion 360 file so everybody can…
Wydruk około 2,76 €–3,38 € nettoWstępna wycena jednego wariantu
Grug. Ugh. substandard.
Wydruk około 2,51 €–3,07 € nettoWstępna wycena jednego wariantu
wall mount for 3 fishing rods 40% Fill in
Wydruk około 2,09 €–2,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Info: These holders contain of left, middle (optional) and right part . The system is adjusted for my solution, where I needed to hang it over my other construction (see photo) Middle part is universal (but i did not used it) Dimensions:…
Wydruk około 4,70 €–5,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
HeyAll! Hope everyone is staying healthy and well. This is a remix from Chriskkk's great design. I wanted it for myself cause it makes it so much easier/organized (and looks great!) to charge everything on the same place on my nightstand.…
Wydruk około 10,83 €–13,23 € nettoWstępna wycena jednego wariantu
Wanted a dock for all my apple products. Adapted KacperL's design to add in iphone and make the airpod's charging wireless. This dock was designed to work with all apple watch sizes. The airpod pro portion of the design was designed to…
Wydruk około 7,70 €–9,41 € nettoWstępna wycena jednego wariantu
Perfectly compatible with IKEA's SKÅDIS pegboard, it seamlessly integrates into your workspace or home, providing a practical and modern solution for keeping your AirPods within reach.
Wydruk około 0,56 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model slides onto the edge of character boards for the for the board game “Sleeping Gods: Distant Skies” to track health. This model avoids the problem of bumping the wooden health tracker that normally sits on the board. No supports…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
wysokość z podstawą około 16,3cm szerokość około 14,7cm wymaga kleju do montażu (np. superglue) Włóż łączniki do jednej strony, następnie sklej obie strony ze sobą i przyklej je do podstawy Do drukowania elementów logo polecam użycie…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
Print in 2 parts preferebly 0.16mm with gyroid infill. Print phone stand vertical and base horisontal with ironing enabled
Wydruk około 4,14 €–5,06 € nettoWstępna wycena jednego wariantu
Desk variant of my “ Charging butler / iPhone + Watch + AirPods Pro wall mount charger ”. Charging butler / Apple iPhone, Watch, AirPods Pro desk charger with Apple “Standby Mode” support in iOS 17 and with integrated 65W power supply to…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
Ersatzschlitten für Ritter Brotschneidemaschine. Link zur Onshape Design. https://cad.onshape.com/documents/7145552868c8438fe3f67994/w/8500e3344400307d3300b761/e/521dd0382918291fa32cc6e7?renderMode=0&uiState=66e7e3d05b681a7292fad5a1
Wydruk około 12,01 €–14,68 € nettoWstępna wycena jednego wariantu
Extremely simple yet functional holder for Kiwi Pods. The gcode may result in some stringing and has zero infill, consider slicing your own gcode.
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Audi a8 d3 krytka ostřikovače
Wydruk około 3,00 €–3,66 € nettoWstępna wycena jednego wariantu
pedestal for minerals
Wydruk około 2,19 €–2,68 € nettoWstępna wycena jednego wariantu
K jehlanu jsou přidány stěnové výšky.
Wydruk około 2,32 €–2,83 € nettoWstępna wycena jednego wariantu
Redukce k odsávání brusky Scheppach BTS 800. Vnitřní průměr menší strany: 35mm, vnější průměr: 41mm Vnitřní průměr vetší strany: 62mm, vnější průměr: 68mm
Wydruk około 2,99 €–3,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can use this clip-on hanger if you want to hang rope/string/cable or fiber coils and you have a hanging rod. OpenSCAD file for parametrization is available here
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a modular system designed for small rooms, its inspired by the Kokiris of the legend of zelda, this system allows plants to grow organically across walls, shelves, or desks. Each planter shares a universal body and connects…
Wydruk około 13,30 €–16,26 € nettoWstępna wycena jednego wariantu
EN: In the very simple and usable model of a filament spooler from 3D-Kalle, there are holes for attaching a pin to secure the shafts, but no pins are designed. Of course you could use a nail or pin, but metal is more slippery and…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
These pods are designed to fit the leading edge of the FMS Supper EZ trainer. They fit so well the alignment is easy. RaceStar A2212 1400Kv motors were used on 3s 2200mah. The flight characteristics are fantastic. Even flies inverted with…
Wydruk około 5,32 €–6,50 € nettoWstępna wycena jednego wariantu
Prvotina-stavba autodráhy pro vnoučata a potřeba vyrobit chybějící díly
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
FOR AIRPODS PRO
Wydruk około 5,42 €–6,62 € nettoWstępna wycena jednego wariantu
Replacement rods for toy mixer. Made my daughter's day, as the original broke. Support recommended, print in high resolution, such as 0.15mm layer height, and 20-30% infill to ensure enough strenght.
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
Remixed from https://www.thingiverse.com/thing:4126727 I have been looking for a mounting plate for a Titan kit with mounting bracket, but have not found it. So I made the mount from the BMG extruder to fit. Fits original MDD plates, but…
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
pedestal for minerals
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
Výztuha podstavce k teploměru pro lepší pevnost a stabilitu z PLA
Wydruk około 1,32 €–1,62 € nettoWstępna wycena jednego wariantu
Tento model jsem utvořit proto, aby jsem usnadnil operátorům práci, malá věc ale funguje skvěle a postupně to šířím celou firmou. Při braní menších něcí nedochází k zalamování v zápěstí a tím předcházíme i onemocnění karpálních tunelů. I…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Combined the ams desiccant tray and the Dry Pod with hydrometer models into a single print. A day after setting this up with fresh desiccant beads ( https://www.amazon.com/dp/B013L31PQ0?psc=1&ref=ppx_yo2ov_dt_b_product_details ) the…
There is an update version of this model: Flat-Edged AirPods Pro (2) Case 2.0 Printable case for Apple AirPods Pro with flat edges. I've designed two versions, one for the AirPods Pro and one AirPods Pro 2 case. Their dimensions are…
This is a compilation of modifications from the original Dummy13 and Dummy13 Type-F that make it a little more feminine. I just made this project so that you can print all files at once, frame and armor, without having to collect each…
I made this dock for my Apple Watch Series 4 with 44mm and it fits like a charm. I also tested it out with the 40mm version (3rd image) and it also fitted very good. It also fits all other Apple Watches (also Ultra), cause the format…
17-04-2024: Added double threaded version as someone requested (experimental) Harder to print and needs support(the base files do not) My projects often revolve around solving niche problems i have. I typically use pill organizers for my…
This is a printable case for the AirPods 4. Since the cases stayed the same between the gen 4 and the gen 5 AirPods this case will fit both. It should stay on without any need for glue or double sided tape and features cutouts for the…
I wanted to print my own nuts & bolt for my camera and tripod. With Fusion 3D it is very easy to create them, but once you print you have to consider also tollerances. I tried few times and at the end I found that you have to reduce the…
I am glad so many of you are enjoying this design. No, this design is not available to license or to sell. I redesigned my original Spice Rack Pullout I designed this pullout spice rack to allow for one, two, or three pull out shelves for…
Do you like the Cable holder ? Then here you have a remix with a few improvements! This remix brings several modifications that improve the original model: Several size options Rounded edges of the model (the original model has sharp…
I challenged myself to create fake AirPods and a matching case to bamboozle my friends. I'm sure it will get a good laugh! Remixed original AirPod 3D design on Thingiverse and then created a case from scratch. I recommend using supports…
Muy buenas a todos los interesados en mejorar vuestras Ender3 S1 y S1 pro Versión 2_11/04/2023 Nuevo ventilador de capa: muchos os habíais quejado de que el ventilador de capa era demasiado difícil de imprimir (y teníais razón). He…
Set of round bar connectors for rods with diameters between 5mm - 40mm Features: Press-fit of the round bars Countersunk screw locking holes Holes for tensile force absorption Customizer:…
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
I created this remix because I have a lot of old spools that are relatively narrow (Wanhao maybe?) . Some are 48mm and some are 50mmm wide and I wanted to use the winder for them as well. While I was editing the parts I also modified the…
Fits into the Model 3/Y center console wireless charging pads and holds AirPods Pro in exactly the right spot to charge wirelessly. Given the extreme environment in a vehicle, high-temperature filament such as PETG is very strongly…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Clodsire, Tabletop DnD miniature 50 mm Large base which can be used for DnD and other Tabletops.
A humorous addition to your footwear or your base cap - just for fun. Please check beforehand whether the print matches. With genuine Crocs, the wings will only fit if you loosen the strap fastenings and use longer screws.
This is a case designed for the new AirPods Pro Generation 2 I included three different files. The first one is for flexible filaments only, as it connects the two halves together. The other two files are just the different halves of the…
Remix of: https://www.thingiverse.com/thing:6341148 and https://www.thingiverse.com/thing:2596157 I have used a different skull that is simpler to print and much faster to print (half time for my settings). I used PLA-CF which came out…
A 1:12 and 1:48 scale Rookie ODST miniature! This miniature is part of a set of 12 available for purchase on my website or on my Patreon until August 2024. The full version includes swappable heads, pre-supports for resin printing, and 11…
Allows you to charge the AirPods Pro in the Tesla Model 3 wireless charger without slipping :) Works as an MMU print, or single color!
Landscape. River in the woods. Can be printed in one piece or glued together in four pieces
I was not able to test this case with real AirPods Pro 3 yet. So if you decide to print this model, please give me some feedback. This is a printable case for the AirPods Pro 3. The top is designed to click right onto the AirPods Case,…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
My intention is to provide models for design purposes, not to 3D print. The color names are in British English, as that is what I was tought in school.
Description Printable case for Apple's latest Airpods model (the 2025 Apple AirPods Pro 3). The photo shows the “glove fit” version. The Airpods case simply slides in and fits snug like a glove and adds a 1mm protective shell all around…
Set di scacchi ispirati alla mitologia Greca. I pezzi sono stati ottenuti come remix dei modelli indicati, utilizzando soggetti adatti ai vari ruoli. I pedoni sono statue di Ercole, le torri due colonne, i cavalli una statua di Pegaso,…
If you haven’t watched the YouTube video, it may be helpful for assembly at around minute 19. Here’s the link: The faceplate was designed to be printed in two colors – black looks great since the printer is also black but feel free to…
When I was looking for mods for my artillery sidewinder x2 I had to look for them one by one, that's why I have made this compilation of all the mods that my artillery sidewinder x2 has. The vast majority of these designs are not mine, so…
This is a collection of the parts I have designed during the build of my 350^3 mm VORON 2.4 3D printer. I have designed them using Fusion 360. The build log post available here (sorry it's in Hungarian only):…
A remix of the Lightning connector based version from @stripetuning_193054 to accept the new USB-C connector.
This is a linear rail mod for the Ender 5 Plus. It encompasses the XY&Z axis. I designed these parts because I was unhappy with most other mod variations of them. Z Axis - The Z axis part were designed using the BLV MGN Cube as a starting…
These are my settings: TPU 0.6 nozzle 4 walls 6 top/bottom layers steam position - aligned support true (only on the build plate)
Joe Cool and Woodstock wall art. 0.2mm, PLA, Sovol SV01
[PLEASE POST MAKES! I am finding lots of people printing and even selling my files without so much as a peep! I provide these addon files for free and it makes me happy to see people making them. My original files are provided under…
When printing, use either rafts or a brim and add supports. Just leave them as they are when slicing. Thank you so much for 100 downloads! Buy me a coffee!
Set of tools for your MINI 13 , LUCKY 13 , EASY 13 and DUMMY 13 Printable Jointed Figures. This set includes three groups of tools - basic household tools, kitchen utensils and garden tools: Basic tools (purple) Wrench Hammer Kitchen…
This product allows you to charge your AirPods Pro on the Tesla Model Y wireless charger without them falling out during the drive. Several designs are available. The original design was created by Nuno. I made some modifications to the…
Supports are needed
Bambu Lab recommends thoroughly cleaning carbon rods with isopropyl alcohol frequently as a maintenance step. But reaching both rods inside printer and cleaning them with fat fingers like mine can be tricky. Also, it's always a chore to…
This case is designed for Apple Airpods Pro and will only work if printed with TPU. Supports are needed. It may some time for the TPU to stretch out and form for a proper fit around your AirPods. Disclamer : I am not responsible for any…
The design consists of 4 pieces, thinking about standard printers. Compact stand for Apple Watch (44mm) and AirPods Base to make the support more stable and join it with the iPhone part Wireless charging support for iPhone. Base to make…
If you find this thing useful, please consider sending a tip. Many thanks! https://www.paypal.com/paypalme/mrhuy01081999 How I Designed This Autodesk Fusion 360 Print Settings Printer Brand: Creality Printer: Ender 3 V2 Rafts: No…
Univerzální podstavec pod figurku Universal pedestal under the figurine
Fishing Rod Hook Keeper – Secure Your Hook with Ease! Easily attach this compact hook keeper to your rod using zip ties or an elastic O-ring. It keeps your hook secure when not in use, preventing tangles and damage. A simple and reliable…
2/21/21 FYI, To keep more up to date with what I'm doing I started an Instagram page @mcmaven.pdx, where I'm posting some of my 3D printing and other designs that I haven't posted here. Triaxial Tourbillon Clock Build Notes: (Download the…
Note: I haven't used this in several years and as you can see in the photo, they worked for my headphones. Seems like they might not work for yours. The Fusion 360 F3D file is in the files section if you want to fix it. Needed something…
This is a Super simple model i made of Air Pod pro 2nd Gen, Hoping other pople might like to remix it etc to make a case or somthing in fusion.
Rugged case for safe storage during traveling.
I just made a Dummy 13 and wanted to customize him
My printer is missing the guide rod fixing screws on the front side. They have a little play if you shake the table. The bar is secured with two M3x20 screws. На моем принтере отсутствуют фиксирующие винты направляющих стержней с лицевой…
This is a small coolections of accessories and mods for the FlashForge Adventurer AD5X There is a: Poop Bucket, Screen Hood & Stylus, Top Extension.
Dunlop or Woods valves are usually used for inner tubes for bicycles. According Wikipedia these valves are not common in the US and are generally found on bicycles in Europe and Asia. The thread isn't exactly 1:1 to the valve thread but…
A file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model, but…
These small lock fit on the standard tension rods with a square head of 5.3 mm. Maybe I will add other sizes later for the Gretsch USA Custom, Pearl Reference of DW Collectors drums since they have different sizes. Send me a PM if you do…
Hydra Compatible 4.1 Model updated for Errors in model that someone reported bambulab 2 row desiccant holders, this works with a hydrometer and sits behind it as well in total you can fit 5 inside, 6 without the hydrometer and you do not…
Currently there are four mods that enable you to build more track variants like the classic figure 8 or putting the track on a second level above the other. NEW! Hybrid_Steep_Curve_4 lifts a standard curve to get a banked turn…
This stand is designed to hold a pair of AirPods Max and charge them at the same time. The model consists of 4 separate parts. Each ear cup is seperated so they may be printed in a softer material like TPU. The base is split in half so…
Do you like the Cable Organizer ? Then here you have a remix with a few improvements! This remix brings several modifications that improve the original model: Several size options Modification with a wall mount Modification with a…
A 1x2 holder for my AirPods Pro Case
When I am running, sometimes my AirPods Pro are falling, so I have designed this ear holder. I have added 7 different sizes. Print it with support (for the arm) in some flex materials like TPU. You can print in PLA or PETG but it is less…
Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- Night in the Woods ring. The inner diameter of…
Nods Or Nothing V1.2 by QwermMakes Nods Or Nothing is a replacement housing for the Nerf Modulus Day/Night Scope, a cheap IR digital camera. The original scope does not have very good mounting options and let’s face it, your poor ass…
Easy print, upside down with no supports. Recommend TPU or other flexible plastic. It fits tight on 4 different size cans. There are 2 different sizes in the middle area for small cat food cans, push all the way down to click on cans like…
![Rope / cable / fiber hanger for horizontal rods [parametric]](https://media.printables.com/media/prints/756522/images/5900593_ef8be5bb-4fa3-4757-a435-cf7725dd69f4_eebecbba-ebad-4e1b-b4ad-39393213dfc3/in_use.jpeg)
![ODST Armor For Dummy 13 [for beta 13]](https://media.printables.com/media/prints/855360/images/6576967_91b72d4f-8642-4806-bd08-02ca5a11a98a_d1cf8550-dea9-41d7-b046-b523f848bc9f/4.jpg)
