445 modeli
Animal bookmarks are a set of 3 adorable bookmarks. Individual bookmark make time: 15 Minuets or less ! Set make time: 41 Minuets Filament use: 1.5g (estimate) varies depending on model Great gift which can be used to show people what you…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Bookmarks for Hogwarts Houses, Gryffindor, Slytherin, Hufflepuff and Ravenclaw with Harry Potter references. Credits SVG files used from the Noun Project Time turner by Made x Made Golden snitch / Potion Bottle by Locad Slytherin /…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena jednego wariantu
A bunch of cute little animal pals to help hold your papers or perhaps mark a page in your favorite book. Great for using up those small bits of filament left on your roll. These are ready for print, no supports etc. If you're one of…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
I created these simple dividers to separate sections of 3-ring binders. They've worked for me for a few years as both dividers and as place-markers. Printing instructions Nothing special - just slice it and print it. I used solid 100%…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
These small easy to print bookmarks are the perfect gift for the Star Wars reader in your life. They are also a great way to use up the end of a spool since they take less than half a meter of filament each. A card is included for gifting…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Designed for dog lovers, these stylish clips feature outlines of various popular breeds, making them a unique and fun addition to your office supplies. Features: 🐾 Nine Dog Breeds – Includes Poodle, Akita Inu, Shiba Inu, Dachshund, Pug,…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A set of bookmarks featuring common airliner silhouettes.
Wydruk około 1,60 €–1,95 € nettoWstępna wycena jednego wariantu
Anneau de pouce pour la lecture Deux tailles disponibles : 19 mm et 25 mm
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my slowly growing collection of bookmark designs, super fast to print. All prints have been tested, and include: Pac-man Ghost Edible Pac-man Ghost (don't eat it!) Dress Snowman Mr Hankey Fish Scary Face Eye of Sauron Chrismas…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Po zkušenostech s modelem https://www.printables.com/cs/model/415374-zalozka-do-knihy-ctyrlistek-bookmark-cloverleaf jsem namodeloval tento model. Neničí stránky knih jako výše zmíněný typ záložek. After experience with the model…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Sports Bookmark Set – STL File (Set of 4 Bookmarks) Perfect for coaches, classrooms, and book-loving sports fans! This set of 4 sporty bookmarks includes designs for football, soccer, baseball, and basketball—each styled with a bold black…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
Záložky s motivy zvířecí kůže nebo srstí a čtyřlístkem. Bookmarks with motifs of animal skin and four-leaf clover.
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Záložky do knih na motivy foto-video techniky. Bookmarks based on photo-video techniques.
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Záložky s motivy zvířecí kůže nebo srstí a digitální kamerou. Bookmarks with animal skin or fur motifs and a digital cam
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Crisp lines for a modern look. Thin and lightweight, fast to print. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Notes: Optional: enable ironing for a smoother top surface Split objects manually by…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is a collection of fun and unique…
These are dinosaur themed bookmarks. Quick and easy to print requiring no supports and minimal infill. These were made from dinosaur Meeple models by Roberth Johansson (https://www.printables.com/social/221466-roberth-johansson/models)…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is a collection of fun and unique…
__________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member of…
Eight page-clip bookmarks: Mario, Luigi, Peach, Toad, Yoshi, Bowser, Goomba and Boo. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm plate — a character…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is a collection of fun and unique…
Eight page-clip bookmarks: Harry, Hermione, Ron, Hedwig, Dumbledore, Hagrid, Dobby and Sorting Hat. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm plate —…
A gothic set of skeleton bookmarks for your next book. No AMS/MMU required, only two color changes. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Black (Esun PLA Black) At layer…
If you're looking for my Bambu print profile, you'll find it at MW . Minecraft Creeper, Skeleton, and Enderman Bookmarks My son wanted a Minecraft Creeper bookmark , but surprisingly none of the printable ones we found were quite right.…
4 BookMarks Harry Potter.
Eight page-clip bookmarks: Steve, Creeper, Enderman, Iron Golem, Pig, Sheep, Chicken and Axolotl. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm plate — a…
_________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member of…
Enjoy this nice japan pattern
Three Lord of the Rings themed bookmarks I made for a friend.
🐶 Dog-Head Bookmarks Collection – Tongue Out Edition Make reading more playful (and a little sillier) with this collection of stylized dog-head bookmarks — each one peeking out with its tongue out and a whole lot of personality 😛🐾 Each…
A set of 3 Halloween bookmarks featuring a ghost, Frankenstein, and a pumpkin jack o lantern. They’re quick to print, thin enough to slip into any book, and perfect as little seasonal gifts or party favors. Print them in festive colors…
Eight page-clip bookmarks: Grogu, Yoda, Mandalorian, Darth Vader, Stormtrooper, R2-D2, BB-8 and Porg. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm plate…
Quick and easy to print bookmarks with a fighter jet theme. Includes F-14, F-35, A-10, Tornado and Typhoon (yeh I know the A-10 isn't a fighter!) I've included several variants of each bookmark including facing up or down and with or…
Fierce dragons over cliffs and bones. No AMS/MMU required, only two color changes. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Black (Esun PLA Black) At layer 8 (0.72 mm), swap…
☀ If you want to sell prints of this model, as well as all of my models - future and past, become an Authorized Merchant member of my Patreon for a commercial license! ☀ Introducing Skulls N' Roses , a bold and striking bookmark set…
Quick, easy, fun, animal bookmarks. The thickness is 0.6 mm for the flat part and an additional 0.6 mm for the animal face outline. I used a 0.4 mm nozzle and 0.2 mm for the layer height. Shown are various colors of Prusament PLA with…
I remixed DuckeyPrinted's bookmark replacing the Mickey topper with my Cat Silhouettes. I created 2 bookmarks. The first bookmark is an Angry Cat with Paws and the second is a Kitten with Paws. These are a quick and simple print. I…
Update 05/15/2022 Now includes two different orientations for each bookmark as my kids wanted it to look like the jets were flying out of the book ;) Details Three quick and easy to print bookmarks with a fighter jet theme. Includes F-16,…
A set of bookmarks inspired by ancient ruins and crumbling architecture. Two manual swaps — no AMS or MMU required. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Black (Esun PLA…
Ideal way to stop a SF book ;) Enjoy!
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is pair of fun and unique superhero…
Only the one true king may draw the sword from the [book], go on, pull it with all your might, you cannot free it from its--- w-what do you mean it “broke off”?!? Cursed Gauls and their magic potion! A pair of bookmarks based loosely on…
Eight page-clip bookmarks: Snoopy, Snoopy on His Doghouse, Snoopy the Flying Ace, Woodstock, Charlie Brown, Linus, Lucy and Sally. They print flat, need no supports, and slide over the top of a page so the character sits above the book.…
A couple of simple sword bookmarks ***Updated Bookmark 1 with a version 2 of it that does not require supports.*** ***Also updated Bookmark 2 so that Cura prints it properly (without detaching the handle from the hilt). Bookmark 1 - Sword…
A set of three seaside bookmarks A rocky shore, a moonlit pier, and a lighthouse under starry skies Two manual swaps — no AMS or MMU required. Print Settings: Layer height: 0.08 mm with a base layer of 0.16mm Color Changes: Start with…
Mandala Bookmarks. Printed on PLA Prusament Galaxy Black and generic turquoise. Printed with MMU2S using extruder 2 for perimeters and extruder 1 for everything else. Layer height .2 mm and .4 nozzle, Prusament PLA settings. You can use…
Catch a wave between the pages. No AMS/MMU required, only two color changes. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Blue (Esun PLA Blue) At layer 8 (0.72 mm), swap to…
_____________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member…
Cute bookmarks with hearts. Fast print. Great gift for couples. Print on 0,2 layer height with two layers. For dual color version change filament color after first layer. Use smooth plate for better adhesion. I use plate with diffraction…
Bauhaus arches, loops, and curves for your next page. Thin and lightweight, fast to print. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Notes: Optional: enable ironing for a smoother top surface Split…
Business Tier members will have exclusive rights to use physical prints of this model for commercial purposes during their active membership. Note: Reselling of 3D model files is not allowed. Some fun dog bookmarks. If this goes well,…
_______________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member of my…
Eight page-clip bookmarks: Capybara in a Hot Tub, Capybara, Capybara with a Book, Capybara with Coffee, Capybara with Headphones, Capybara with a Tangerine, Capybara in a Beanie and Capybara with a Rubber Duck. They print flat, need no…
Read through the bamboo with quiet companions. Two manual swaps — no AMS or MMU required. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Black (Esun PLA Black) At layer 7 (0.64…
Floral reliefs for your pages. No AMS/MMU required, only one color change. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Black (Esun PLA Matte Black) At layer 8 (0.72 mm), swap…
Original post by JimiJones in Thingiverse, all credit goes to him, go check him out: https://www.thingiverse.com/jimijones/designs
- Original (front view, the rest is in isometric view) - Sitting - Standing - Walking ~ 14 x 3,5cm size --- Based on my Minifigure cookie cutters https://www.printables.com/model/170476-lego-cookie-cutters-set --- Every model is in two…
Skeletons in ornamental frames, keeping your place between chapters. No AMS/MMU required, only two color changes. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Black (Esun Matte…
These dinosaur bookmarks are a clever usage of previous models. I liked them so I made them as handouts for our dinosaur themed birthday party. They seemed to be lacking a few tweaks needed to make them great though so I remixed the model…
A set of 15x4.5x0.1cm bookmarks featuring Seigaiha patterns, designed for multicolor printing with any FDM 3D printer. These are very simple to print, just open them in your slicer of choice, and add layer stops where you want to swap…
If you're looking for a perfect bookmark to go with your Witcher adventures then look no further! But if you're looking for a cool sword then you're also in the right place. Instructions: Pick the sword type (steel/silver) Print the…
Initials Bookmark A simple bookmark with initial. All letters are available now! Start the print with one color and change the filament after 1.4 (7 layers) mm to get a good contrast.
Printed with .6mm nozzle with .30mm layer heights. Prints in 5 minutes or a dozen in about an hour.
___________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member…
If you like this model, feel free to tip me at https://ko-fi.com/kcthechemist. If not no worries and enjoy! Quick easy to print Hogwarts House themed bookmarks from Harry Potter. Each bookmark was printed on a single nozzle printer using…
________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member of…
Here's some free Xmas freebies for you all. Enjoy! I have a profile on Cults3d.com if you fancy checking out my sales: All the 3D models of darkprojectworks・Cults (cults3d.com)
Eight page-clip bookmarks: Hello Kitty, My Melody, Kuromi, Cinnamoroll, Pompompurin, Keroppi, Badtz-Maru and Tuxedo Sam. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip…
My Son is huge into soccer, and I couldn't find anything that he would like to give out to classmates for Valentine's day. So I put these bookmarks together with a Soccer theme using Tinkercad. Will update with printed images once I get…
Introducing an exquisite 3D model collection of 10 Butterfly Bookmarks, these models are a perfect fusion of intricate design and functionality. Ideal for avid bookworms and butterfly enthusiasts, the bookmarks come in a diverse range.…
Dune Bookmarks for three different clans from the movie - Atreides, Harkonnen, Fremen. Even without a color printing system, you can easily print these bookmarks in two different colors! If you need ready-made files for color printing,…
__________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member of…
Let your pages fly with our exquisite 3D model, 9 Feather Bookmarks. They bring the perfect touch of beauty and subtlety to your reading experience. Crafted with remarkable detail and realism that only 3D modelling can capture, the…
______________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant…
Read through giraffes, zebras, and elephants. Inspired by the harmony of Africa’s wildlife. Two manual swaps — no AMS or MMU required. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start…
Skeletons keep your place from their coffins. No AMS/MMU required, only two color changes. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Black (Esun PLA Black) At layer 7 (0.64…
Bookmarks to help you not lose your spot when reading! There's 3 types: Pokeball Pikachu tail Pikachu heart tail
_____________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member…
Celebrate the Christmas season with this fun and cheerful collection of 3D printed bookmarks! Each design features a classic holiday character including a jolly snowman, Santa Claus, reindeer, Christmas tree, and gingerbread man. Print…
A miniature bookshelf to mark your place in every story. Two manual swaps — no AMS or MMU required. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Black (Esun PLA Black) At layer…
Quick and easy to print bookmarks of military transport aircraft. Includes C-5, C-17, C-141, KC-135, C-130 and A400M. I've included several variants of each bookmark including facing up or down as well as long and short versions. I…
Explore the captivating world of 3D arts and entertainment with our "6 Large Floral Bookmarks" 3D model crafted by Clod Stomper Productions. These bookmarks represent an intricate blend of creativity and engineering, turning a simple…
Made my daughter a simple bookmark. She then wanted to give all her friends one each so here you go - every letter of the alphabet. https://cad.onshape.com/documents/100a5f14eaf2fc08845e82ec/w/d86e496e815358ce06834160 Print instructions…
Bring the warmth of sunflowers to your reading. Two manual swaps — no AMS or MMU required. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Black (Esun PLA Black) At layer #9 (0.80…
Eight page-clip bookmarks: Frodo, Gandalf, Aragorn, Legolas, Gimli, Gollum, Nazgul and Treebeard. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm plate — a…
Eight page-clip bookmarks: Stitch, Lilo, Angel, Stitch with Ukulele, Surfing Stitch, Stitch with Ice Cream, Scrump and Pleakley. They print flat, need no supports, and slide over the top of a page so the character sits above the book.…
Skeletons holding hands in a love that never dies. Three manual swaps — no AMS or MMU required. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Black (Esun Matte PLA Black) At…
A reworked version of my bookmarks with additional motives. Their thin character does not damage the book or its binding or bend the pages, like other, thicker bookmarks would. Some motives like the triskelion make beatiful shadow images…
These are bookmarks with the heads of chess pieces.
Set of 4 fantasy dragon bookmarks, choose the one you like best and print it in just over an hour or print them all. They are in separate files for more convenience. Project: bookmarks dragon.hfp Print at 100% infill with a layer height…
Halloween Bookmarks Prints flat, easily and without support Print Settings : - 0.2 mm layer height - no support, no brim - Full infill - PLA Grey and Orange from Eryone All my designs are copyrighted, so you can't sell digital or print…
COMMERCIAL LICENSE ACCESS is available through a patreon membership where you help support me and get commercial license which applies to all my models except remixes i made from others work. https://www.patreon.com/Dengamleninja
_______________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant…
A beautiful set of bookmars with a different pictures of a red blossom The full set is to be printer together. It's designed in such a way which makes this possible with the color changes. Print at 100% infill with a layer height of…
Prepare to watch the upcoming release of Netflix's Avatar: The Last Airbender with these bookmarks. Water Tribe, Earth Kingdom, Fire Nation, Air Nomads: pick your favorite, or print all four.
In the print profile is a negative part “hole” added. (not in .stl file) If you want the bookmark without a hole so remove only it before final printT Two version size models in one (same) profile, the first is size 50x150mm and the…
This set of 20 bookmarks features the iconic Allomantic symbols from Brandon Sanderson’s Mistborn series, also known as the Steel Alphabet. Each bookmark represents a different metal used in Allomancy, making it a perfect set for fans of…
English description (suggestion): "Stylish 3D-printed bookmarks inspired by the unique world of K-pop Demon Hunters. Perfect for fans who want to combine their love for reading with their passion for K-pop aesthetics. Compact, and…
Happy Holidays! You are looking for Christmas themed bookmarks or Paperclips? I've got you covered. You can choose between the Reindeer, the Christmas Tree and the Sir Snowman bookmark and paper clip. Sir Snowman has also two versions,…
