13 485 modeli
Nice modern dcorative plant pot or planter for your home. Most easy to print in 2 or 3 layered Vase mode setting. Prefered material - PLA filament. Happy printing!
A new design inspired by the wind and sand of our planet (and other planets to). Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the…
An anti-sphere inspired plant pot, giving it a very spacy and futuristic design loking like it is coming from the year 2148 ! Your plants will love it! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top…
~ Design collaboration with Azurefilm ~ A nature inspired plant pot! We hope you enjoy it as much as we did design it! Used Filament: This model was printed using Sage HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us…
This chunky boy can hold plants, pencils, and much more for you while being a happy fella. Every make will be featured on my Instagram add your handle and follow me :) Check out my Instagram if you want to see more designs like this or if…
A nice tradicional pot and planter for plants or flowers. Best to be printed in 2 or 3 layered vase mode settings - material: PLA Happy printing! :D
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
Cactus pot made from Stretch Cat: https://www.thingiverse.com/thing:974565 Just scale to the size you want. Altered so it can be printed with minimal supports, but does require them. I put gauze over the hole in the bottom of the pot to…
A nice and quick pot/planter for your lovely plants! they will love it We suggest printing it in a dubble layered vasemode - the outcome is nice and rather quick :D Happy printing!
I designed this Elder Wand from pictures after watching the Harry Potter movie series again in anticipation of Halloween. It is divided into two pieces so that it will print on smaller print beds, but have also included the full wand for…
Hi there! There are 2 versions of this print, one without and one with holes. I use the pot for different kinds of indoor house plants. Most of my happy pots i printed with 5% gyroid infill it's very sturdy! In my opinion you could use…
Wydruk około 13,95 €–17,05 € nettoWstępna wycena jednego wariantu
Printed with regular 0.15mm quality profile in Prusa slicer with PETG .
Easy print for all fans. Harry potter keychain.
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Golden Snitch Harry Potter
Advancent error planter or pot fo your plants. The main idea for the structure comes from a great and lovely designer here - Extrutim - He was so kind to allow me to turn it into a pot design (once again big thanks for that!!!)…
Wydruk około 1,57 €–1,91 € nettoWstępna wycena jednego wariantu
A plant pot inspired by the perfect structure of bismuth crystals. Used Filament: This model was printed using Brass High Gloss PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to review…
A lovely gift from the bottom of your heart. A plant pot fit for Valentine's Day. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
harry potter tags for Christmas, Pendants or keychains
This is a digital 3D printable model of the Golden Snitch from the Harry Potter series. It’s designed to work with both FDM and SLA printers. The wings can be printed flat, which makes them especially easy to print on FDM machines. After…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 4,47 €–5,46 € nettoWstępna wycena jednego wariantu
A modern planter / pot design for your plants. it's easy to print and has a great ilusion of spinn in it :) I suggest printing it in 2 or 3 layered vase mode. Happy printing!
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed
An Art deco ispired planter or pot for plants. Best to print in vase mode (can be single or dubble layered - depends on the size) Happy printing! :D
Pineaple + Crown = An idea that poped into our mind a few days ago and we created a pot design out of it! Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Let me know in the comments if you find any kind of problems and I'll try my best to solve them. I have uploaded 4 examples as demo prints for everyone, for the customization read down below. I can't wait to see your makes and remixes!…
Hello Kitty Pot Plant There's a version without hole so can be used as a container Nozzle: 0.4mm Layer: 0.2 Could be print without supports
A moder take on the tradicional star plant pot - will fit your plants and interior beautifuly! Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a stroneger print)…
Wydruk około 1,12 €–1,36 € nettoWstępna wycena jednego wariantu
UPDATE: Some people have had trouble with weak screws, so I've uploaded new files for the screws, made to be printed horizontally for stronger layer lines. Most printers could print the regular screws just fine, but if they seem weak…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Wydruk około 6,00 €–7,33 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
A new entry in our Crystal Structure series! We hope you enjoy it as much as we do Used Filament: This model was printed using Brass High Gloss PLA from FormFutura The FormFutura team was so nice to send us some samples, and we had the…
Wydruk około 3,46 €–4,23 € nettoWstępna wycena jednego wariantu
Print & acrylic draw
The pot is inspired by the structure of old fashioned crystal chandeliers. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Wydruk około 3,48 €–4,25 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
The cup has tiny holes on the bottom so that the soil can absorb water from a tray. The cup has very thin walls on purpose so that it's easy to flex it and remove the compressed soil with the plant once it's time to move it to a larger…
Wydruk około 3,00 €–3,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inner plant pots in various dimensions: easy to print and no support needed The pot in the pictures is d95-D140-H115 and is printed in PLA. If you need other dimensions you can scale the model or feel free to leave a commment - there will…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Bonsai Pot with Drip Tray, Drainage Mesh and Small Feet Looking for a modern, elegant bonsai pot? I was too — until I designed one myself! This set includes: A stylish bonsai pot with a drainage hole A matching drip tray to catch excess…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena jednego wariantu
One fits 3 cup, while the other fits 6 cup. 6 cup have not been tested. I hava also made a tamper :-) It is only intended to collect the coffee in the funnel, not compress it. Print instructions You don't need support, but orient the…
A low poly vase / pot for plants or flowers Prints very nice in vase mode Happy printing! :D
Wydruk około 3,69 €–4,51 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
This is a part of the Botanical Collection available in our Printables Club. A geometrical design inspired by plant ornaments and crystal structures. Very easy to print and looks great in modern interiors! Print information: Recommended…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena jednego wariantu
Just a simple desk stand for the Spotify car thing. Great for use with Desk Thing as well. Prints in just over an hour with the PrusaSlicer “Draft” profile. Made this quickly as I found Spotify car thing to be a useful device to have on…
We are for sure big fans of crystal structures here! So… Here is our newest model inspired by the great growths of Moon Crystals! We hope you enjoy it! Used Filament: This model was printed using ROSA 3D PLA-Silk Navy Blue The ROSA 3D…
An Simple modern plant pot and planter for your plants. Inspired by an elegant crystal structure. Best to be printed in 2 or 3 layer vase mode settings - Printing material PLA or ASA Happy printing!
Wydruk około 1,45 €–1,78 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Update: I included a version that is rounded on one side and square on the other. Print whichever you prefer! Summary: A tool for pottery wheel throwing, to shape pottery pieces with a wave-like pattern. Makes for amazing tea mugs!…
Whether in the workshop or the pottery studio, with one measurement you can get the inner and outer diameter of any piece! Perfect for making two pieces match so they fit together, whether that be pottery lids on teapots, wooden jars, or…
Wydruk około 2,21 €–2,70 € nettoWstępna wycena jednego wariantu
A nice geometrical design using an inverted quilted pattern. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Supports needed (organic supports recommended) Scale it as you like :)
A simple yet very creative design. Fits great into modern interiors! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Make your collection visible New version of TCG display is available collection https://www.printables.com/model/1490952-multiple-tcg-sports-cards-wall-holder-and-display PSA graded TCG spots cards wall holder and display frame.
This is a simple model inspired by herringbone gears and designed to work as a flower pot cover. It fits standard plastic pots up to 11 cm in diameter. Print instructions I just used the standard profile for Prusament PETG, vase mode and…
I wanted a self-watering planter that I could insert in my various ceramic/plastic pots and would be fast, easy and economical to print. You can use this insert in pots you already have. Using the attached Fusion 360 file, change the…
Wydruk około 2,63 €–3,21 € nettoWstępna wycena jednego wariantu
A simple yet very effective plant pot for your home. The design is inspired by the structure of an ancient column. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3…
Some new fireworks are in the sky! Falling stars and such are to be seen! So, we wish you all a Happy New Year already! Used Filament: This model was printed using ROSA 3D PLA-Silk Gold The ROSA 3D team was so nice to send us some samples…
Wydruk około 3,63 €–4,43 € nettoWstępna wycena jednego wariantu
A plant pot inspired by the structure of a shattering mirror. Used Filament: This model was printed using Brass High Gloss PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to review this…
Wydruk około 2,89 €–3,53 € nettoWstępna wycena jednego wariantu
An easy and beautiful planter or pot for your house plants. Created by mixing up some very strange shapes. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a…
A gentle summer breeze caught in a moment of silence - simple and beautiful. This plant pot is inspired by a very simple way of showing moving air. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top…
This is a remix of the original File by Back37strad. My main goal for this was to make an actual knob smaller compared to the original in height. You can see in the images how it compares to the standard knobs on my beautiful Ibanez…
A simple design inspired by chevron pattern planks. Used Filament: This model was printed using Off-White HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us some samples of their filaments, and we had the pleasure to…
A zigzag shape inspired plant pot. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a stroneger print) Prints very good in any filament The model is scalable to your…
Wydruk około 1,89 €–2,32 € nettoWstępna wycena jednego wariantu
Pua the Pot-Bellied Pig Added Pua2 on 11.12.2024 (cleaned up noise on but and underbelly, lowered tail, smoothing in some noisy areas) .. Thanks Cody.
Wydruk około 4,08 €–4,99 € nettoWstępna wycena jednego wariantu
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
While thinking of new ideas we realized that we never made a Flower flowerpot! So... We made one! We hope you like it! Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send…
*** New collection of 8 plant pots - https://www.prusaprinters.org/prints/127174-plant-pot-collection *** The "Arnold" plant pot / planter is 7cm in diameter and 6cm in height. The design is a solid shape, giving more freedom for wall…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
The GCODE file contains a model in vase mode with dimensions X 100mm, Y 100mm, Z 60mm. Thickness and flow of the outer wall 0.65mm 150%, bottom of the pot 1.08mm, initial layer 0.28mm.
Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu
A simple geometrical design inspired by the amazing Matrix movies! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Wydruk około 4,07 €–4,98 € nettoWstępna wycena jednego wariantu
Witches Cauldron : Candy Pot
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Hexagon styled seedling planters 3 heights to combine for visual esthetics or different plant needs. Easy to fill when connected due to reduced spill over. Careful release by gently pushing up the bottom inlay. 13 pieces fit one standard…
A simple yet elegant plant pot inspired by the glamour style of the early 20's. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
A pot crafted by accident that turned dark… Nah it is just a regular plant pot, but it looks pretty cool! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer…
Wydruk około 4,18 €–5,11 € nettoWstępna wycena jednego wariantu
A simple design inspired by modern lamp shade structures. Used Filament: This model was printed using Off-White HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us some samples of their filaments, and we had the…
I don't want to have to fold my glasses and struggle putting them in the right groove so they don't fall over. This bud wears them proudly, just throw them on him and voilà. Most glasses sizes fit, but the little guy wears +2.0 lenses for…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Can be printed without support
Wydruk około 9,26 €–11,31 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Supports needed (organic supports recommended) Scale it as you like :)
Simple but modern two-part pot or planter for your house or garden plants. Design inspired by Aztec design and buildings. A new design series called Ancient design is here! - there will be more such pots in the future - let us know what…
A simple plant pot inspired by a gaze upon a vast wheat field with no end. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-on-Support) Scale it as you like :)
The pot is inspired by the structure of another old fashioned crystal chandeliers. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
Wydruk około 2,06 €–2,51 € nettoWstępna wycena jednego wariantu
We have been playing The Invincible recently and we loooooved the sci-fi style sooo… we got inspired for such a design! We hope you enjoy the design too! Print information: Recommended regular/base settings (15% infill, 5 top layers, 4…
Print in vase mode. The GCODE file contains a scale model with dimensions X 80, Y 80, Z 60. Outer wall width 0.65, outer wall flow 150%, base thickness 1.08mm, initial layer thickness 0.28mm, main layer height 0.2mm.
Print with lightning infill to save material and time. It is a long print, due the curved surface. Other than that, standard print settings.
Wydruk około 13,33 €–16,30 € nettoWstępna wycena jednego wariantu
Printed with 0,2mm layer, 15% infill. Very easy to print. Scale it up or down as you need :) I’ll be glad if you share your print! NEW: Print a friend for your bird: bunny
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Roll a critical hit with this d20 plant pot! A small d20 themed pot, ideal for little plants or as a dice roller. Details Fits a small pot approx 60mm diameter wide by 50mm tall
Wydruk około 3,56 €–4,35 € nettoWstępna wycena jednego wariantu
This beautiful curvy pot prints-in-place with the drain tray attached and ready for planting. The model includes a series of hidden channels beneath the plant that allow the water to drain out to the outer portion of the tray, where you…
Small stars twinkle in the sky, as they do each day every day. So inspired by that we created a new pot design! Merry Christmas and Happy Holidays! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top…
Wydruk około 2,63 €–3,22 € nettoWstępna wycena jednego wariantu
A set of three different geometric flower pots, ready to print in Spiral Vase mode! Large: 13cm Medium: 10cm Small: 5cm Print instructions Best printed in prusament galaxy black in Spiral Vase mode 0.2mm layerheight!
This pot is a manifestation of different dimensions breaking into each other! Inspired by the great visuals of Doctor Strange. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
