Shattered Mirror Plant pot and Planter - Vase mode design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
2,89 € – 3,53 € netto (bez VAT)
Dla pliku: Shattered mirror_pot_0.4n_0.2mm_PLA_MINI_2h59m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 3,21 € netto (środek widełek).
- Masa podana przez autora
- 45 g
- Czas druku podany przez autora
- 2,98 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A new take on a previous design we made, we hope you will enjoy it as much we do!
- Ocena
- 4,9 / 5
- Polubienia
- 207
- Pobrania
- 905
- Wydruki
- 12
- Wyświetlenia
- 2465
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Standard Digital File License
A plant pot inspired by the structure of a shattering mirror.
Used Filament:
This model was printed using Brass High Gloss PLA from FormFutura
The FormFutura team was so nice to send us some samples and we had the pleasure to review this filament and we can definitely say it works amazing, the print quality looks really nice, and we enjoyed the full shine of the colour the most.
We are part of their affiliate program, so if you like the colour and how shiny it looks, we recommend buying it from their store (links below). By doing so you are also supporting us!
We also recommend using our 15% discount code for their store: sassydesign-15
Brass High Gloss PLA: Formfutura.com - High Gloss PLA
FormFutura Store: Formfutura.com
Print information:
- Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)
- Recommended using a lower layer hight (0.15/0.2mm) for better results in details
- Prints very good in any filament
- The model is scalable to your liking
Happy printing!