45 modeli
Описание на РУССКОМ языке – ниже. New Year Decoration: Snowflake This is the third variant of my 3D snowflake. You can find other variations in my profile. Fully free commercial use with no restrictions! Low cost, mass production – 10…
I printed all the parts in .3mm layers with Prusament Jet Black PETG. Check out the pictures and models. Four (4) piece assembly goes together smooth. The assembly is self explanatory but something to note is the pin has right handed…
Описание на РУССКОМ языке – ниже. New Year Decoration: Snowflake This is the second variant of my 3D snowflake. You can find other variations in my profile. Fully free commercial use with no restrictions! Low cost, mass production – 10…
It's not perfect copy of the original, but it seems to fit nicely and gets the job done. I was printing it with PLA and with supports, but I think supports are maybe not needed.
After purchasing an iDPRT 4x6" thermal label printer on Amazon, I quickly became annoyed by how messy the stack of labels got sitting off behind the machine as there was no included organization with the printer. They sell a separate bin…
Note: German description below. Replacement Spool Cap for Parkside PRTA Grass Trimmer – 3D Print Optimized This custom-designed spool cap is a replacement part for the Parkside PRTA grass trimmer, specifically optimized for 3D printing.…
Coperchio di ricambio per tagliabordi a batteria 20V PARKSIDE PRTA 20-Li Replacement cover for cordless trimmers 20V PARKSIDE PRTA 20-Li
Printed from PET-G or PLA+, I recommend supports only in the places of attachments. I recommend printing at maximum temperature. (pla 230C, PETG 250C)
This gear is made by me based on information found here. The gearbox uses a fixed ring and a output ring, allowing high speed reduction with a somewhat large sun gear. Formula used to find gear ratio:…
A simple solution for storing the Parkside grass trimmer, Wall mount blocks can be found here: https://www.printables.com/model/1012996-snap-tool-rack-blocks
Step files and sldprt files of these if you want to use them in a design
Hokejka na šprtec. Tisknul jsem to z pla,petg,asa. Záleží na každým kdo jakou tvrdost preferuje. Ale asi nejblíž k originálu to je z petg se 100% výplní.
This is a 1:40 model of the Morgantown PRT. This system opened in the 1970's and was built by Boeing. It is the only system of its kind in the world. It transports students at West Virginia University between 5 different stations. The…
The part is designed to prevent coffee bean fragments from building up tightly around the top of the grinder
A housing for thermal printer GOOJPRT QR203 58mm from ali-express ( https://de.aliexpress.com/item/GOOJPRT-QR203-58mm-Mini-Embedded-Empfang-Thermische-Drucker-Kompatibel-Mit-EML203-Tragbare-Drucker-Thermische-Druck/32842719719.html ).…
Stand/holder for the large 4x6 label rolls with 3" ID core you can request from UPS/Fedex for free. Designed to mount on top of iDPRT SP410/SP410BT but also included a flat base version. You need to print two of the rollers, one for each…
lo imprimí a una altura de capa de .26 con un relleno del 30%, paredes 4, capas superiores e inferiores 3, en una impresora Longer LK5 pro. Use filamento pla genérico y petg genérico.
Hello there! this is an simple and quick to print holder to support your GPUs sagging rear end, with an M20 thread and a lock-ring it can hold even the heaviest cards with no worries, it is adjustable and should work for most cases. I…
print two of each file, assemble the bases with the skewers, glued or screwed, and assemble the ceiling at 90 degrees, in this way it can be assembled with the already grown plant. can be used both in the soil itself and in a pot
v60 pour over device not to be printed with PLA
Stampato in PETG, richiede supporti
This was a quick and nasty design, but someone else might find it useful. It uses a couple 608 bearings I had laying around. Attaches to the top of the printer with some velcro tape I also had laying around… The spool of printer labels I…
Works on most school switches that require a key.
Note d'impression Aucun support nécessaire
Very strong shelf bracket 24x24mm, it comes with a flap which hide screw so everything look clean. You can change dimensions in freecad.
This mounts with two double sided tape strips under a desk. Then the power supply brick for the printer can slide into it and clip into place. It can easily be removed if you want to move the thermal printer. Print this with tree supports…
Simple suppport for: https://www.printables.com/it/model/122894-hexscraper-printbed-scraper
Prometo mas adelante mejorar la descripcion!
Simple adapter that allows installation of label rolls for Aopick P12 on PRT Qutie mini.
Please like model, if you are satisfied. EN: Replacement insert between body and cover for Parkside strimmer. Tested on mode PRTA 20 C3. Printed from PETG, 0.25mm layer, supports on. The left and right sides are axisymmetric, just mirror…
The model is just a 100 mm circle that is 5 mm tall. You can add a string to the part to create a necklace and wear it. Change color after 3 mm to make the text more evident. You can choose your language between English, Italian, Spanish,…
# ŠPRTEC Sada (v3) Kompletní sada pro stolní hokej **šprtec** v oficiálních rozměrech podle pravidel **ČSST** (Česká sprtec federace). ## Obsah - **Puk** — ⌀18 mm, výška 6 mm - **Hokejka** — shaft 115 × 10→6 × 7 mm, blade 32 × 2 × 7 mm,…
A highly detailed CAD model of a classic bicycle, provided as a full assembly rather than a single static mesh. By opening the .3MF file, you will find that the components (frame, wheels, pedals) are separated. Disclaimer (Experimental):…
seguro para tirante de pechera impermeable
I know the off-the-shelf cable tag integrated with a zip tie. But I wanted to save my money with my own zip ties. Prints in PLA. Labeled with TEPLA.
Playing pieces for tabletop hockey. A set of forwards, defenders, and a goalkeeper. I printed the defenders with a higher infill so they would be slightly heavier. ( My first model :D)
Note: German description below. Replacement Spool Cap for Parkside PRTA Grass Trimmer – 3D Print Optimized This custom-designed spool cap is a replacement part for the Parkside PRTA grass trimmer, specifically optimized for 3D printing.…
Step files and sldprt files of these if you want to use them in a design
Stand/holder for the large 4x6 label rolls with 3" ID core you can request from UPS/Fedex for free. Designed to mount on top of iDPRT SP410/SP410BT but also included a flat base version. You need to print two of the rollers, one for each…
I know the off-the-shelf cable tag integrated with a zip tie. But I wanted to save my money with my own zip ties. Prints in PLA. Labeled with TEPLA.
Playing pieces for tabletop hockey. A set of forwards, defenders, and a goalkeeper. I printed the defenders with a higher infill so they would be slightly heavier. ( My first model :D)
This is a support for cardboard angle that allows the angle to support itself I use it for building a protection for my citrus plants for the winter! I used PETG for printing it 28cm x 28cm
![Olympic medals for common people [ENG-ESP-PRT-FRA-DEU-ITA]](https://media.printables.com/media/prints/965304/images/7369061_23f04a34-fc56-4d54-be05-fd3275e4153b_7ca4aed1-404d-431f-b772-83c743a6af90/20240805_151034.jpg)
