115 modeli
I needed a place to put my PSVR2 away that helped to keep dust off of the lenses. This model also was made so that I could attach it to my Ikea Skadis board. I'm using 8/32" hardware to mount it as I wanted it to be secure.
Wydruk około 5,40 €–6,60 € nettoWstępna wycena jednego wariantu
Gcode files are PLA (I used Overture), .3mm draft, 15% lightning infill (For time/material savings). You will almost definitely need to turn off perimeters if you position on your own bed as well (Gcode should include this off by default)…
Wydruk około 5,87 €–7,18 € nettoWstępna wycena jednego wariantu
Simple yet effective under the desk mount for DC adapter delivered with PSVR2 PC adapter. Snug fit so it will not move easily.
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
A dust cover for your psvr2 PSVR2 Lens Cover
Wydruk około 6,25 €–7,64 € nettoWstępna wycena jednego wariantu
This works well for my PSVR2. There are a few choices for the base that add extra weight in the front to reduce tipping over backwards. See the STL files for the base choices. I printed the simple ‘front bar’ one at first and then the…
Video Game Stands (PS1,PS2,PS3,PS4,PS5,PSP,XBC,XBO) by nibor_repmek - Thingiverse
I bought a used PSVR but it didn't come with the camera stand, so I decided to design and print one! It fits the camera nice and snug, so you can rotate the camera in it and it'll hold its rotation. I put some of these rubber feet on it…
Update: V2 is released! Improvements include: Improved/intentional controller mounting spots previous spots to hold controllers were a happy accident Improved cable holder made it shorter, made the securing angle steeper Improved headset…
couple of features charging cable tunnel , you can charge controllers while placing it on the stand print this completely supportless on FDM printer. have fun , i am starting a patreon where u can find my newer designs, please follow me…
Fully printable & tested model. Full description and more photos in PDF "guide" Fell free to ask if you need more information. Can't wait for first made! I share all my projects for free. If you find out my designs valuable, you can tip…
Display your favourite handhelds! I was horrified by big chunky stands so I've made one myself! I have tested it with Steamdeck, PSP, PSVITA, New 2ds XL and DS. It could not work for other handhelds Share your pictures if it worked for…
Protect PSVR2 USB-C plug and PS5 USB-C socket in case of accidental cable pulling to sides. For initial PS5 variant. Printed from PETG, 0.4mm layer, 15% infill. Any (almost) settings will work. Fusion 360 source included.
Fast 3d scan with Revopoint Pop2 3D scanner, some cleaning, smoothing and polycount reduction to 250k in Zbrush. Better scan to come but already should be enough for some projects. Simply mirror the model for the other controller.
Designed for use with my rig but maybe useful to a desk or other situations. Printing: I used PLA, and printed it the simplest way: pointing straight up with maybe 25% infill. That'll work fine if your printer has good layer adhesion.…
Holders for SD, mini SD and micro SD cards (Gridfinity, stackable and labelled) There is also a collection of battery holders with similar design. Credits: These works were based upon: Zach Freedman's initial designs of Gridfinity.…
In general, the model has become better. The number of mounting holes has become smaller. The model is easier to print. The number of problematic slopes has been reduced.
This is an insert for the PSVR2 Sense controller that offers basic parity with the Valve Index Knuckles controller (the controller encases the hand so you can fully open your hand without dropping the controller, this is very helpful for…
This PSVR holder fits perfect and you will not see it when the VR is on the holder. Its simple for people that doesnt want any complicated constructions and their only goal is to hang the VR on the wall. You dont have to worry about it…
Cable clip that holds your VR headset cable on your belt. Easy print, no supports needed.
Super simple hook for storing the controllers
This is my idea of an almost vertical stand for the Sony PSVita TV. Of course making a simple square shape hurts my brain, so here is a very specific irregular shape that's closely related to the PSVita TV itself. The design itself…
My personally designed PlayStation VR stand was made with sleek style and functionality in mind. Its tilted headband bracket and forehead rest is positioned at such an angle where when strapped on, the VR sits fairly level and facing…
I modified the Top & Bottom part fastening setup so that no HW needed. Category: Toy & Game Accessories
All VR lens adapters out there have lens attached completely flat. Actual eye glasses mount lens at a slight angle forming a curved surface. For me, the flat mounted lens cause my peripheral vision to be distorted (straight lines look…
Scan of visor part of PSVR2, scanned with revopoint pop2 and revopoint mini. decimated in meshlab. incomplete , NOT 3d printing ready as not watertight, but might be enough for some projects. better scans might come. If you own a psvr2…
This is a custom design I made for my PSVR Processor Unit. I needed to keep it out of the way while at the same time stop it from flying about while connected to the headset. I have modelled in some pilot holes but if you need to make…
I tried to use my Index controllers with the PSVR2 using space calibrator, but the IR emitting base stations interfere with the IR based camera tracking on the headset, so I made a way to do it natively by attaching a 3.0 Vive Tracker.…
Stackable shelf for Playstation 4 and Playstation Vita games. Print how many shelves you want/need, stack them, and then print corresponding top part to close it.
Quick and dirty print for mounting a PSVR 2 PC adapter underneath a desktop. Please remix this and make a better one!
These pieces are designed to make it straightforward to attach a Vive DAS to a PSVR2, using M3 nuts/bolts or hot glue/VHB tape. The stock facial interface needs to be unscrewed for the custom interface to take its place, the visor must be…
Printed in PETG. Designed for drywall screws. Adapter slides in and is held firmly by two tabs. Tolerance is tight.
The PSVR's cable hinders the head movement if it stuck somewhere. This cable clip can be adjusted for the perfect length allowing the full comfort. Obviously, the clip can be used with any headset cable. Category: Toy & Game Accessories
After careful measuring and precise design of subtracted material this is a lightweight and NO SUPPORT NEEDED print that, with a normal printer, can print in about 4-6 hours according to settings. I used .2mm layer height and, for myself,…
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation…
Use TPU The plug should be pressed through (it's separate to remove the need for support) Press the cable into the channel on each side Support should not be needed You could print the main body in PLA/PETG, but the plug really needs to…
The entire text has been translated. This is a simple model that improves the stability of the helmet, thanks to which the goggles do not fall down on the nose. Printing without supports 10% infill 2 walls 0.20mm layer I used Velcro…
A little riser tray to hold the PSVR processor box. That little box gets really hot and I had mine on top of the PS4. I thought it would be a good idea to give them both a little breathing room. Print instructions The legs for the riser…
Link to the fusion 360 design files https://a360.co/2UpffmD Also needed are 2 x M2 screw (black) and 1 x M4x40 alan head bolt To fit just remove soft earbud holders and push fit into hole. Print instructions Category: Props Summary Link…
Really simple model, easy to print also.
white until 5.8mm red until 6.2mm gold until 6.8mm finish with black
This is a small piece to print (twice) for affixing to your PSVR for people who wear glasses. This is thought to help reduce scratches on the PSVR lenses (and your glasses?). Why the remix? I wanted smoother lines, different fillets, and…
PSVR ProcessorUnit Stand. See this site for more information. Sorry, This site is Japanese only. ( https://kitto-yakudatsu.com/archives/2961 ) Print instructions Category: Video Games Print Settings Printer: DeAGOSTINI idbox! Rafts: No…
My Bambu Lab X1CCs are really classy but they were missing something, a little gamer touch ! So I looked online and saw the model from EmBy Designs which inspired me ! And this is what it gave ! A really classy screen cover that's super…
printed with supports .
Comparing to Quest's controller PSVR2's grip button is very uncomfortable, espesially when you need to long press it to hold something, so I made this raiser to make it easier to press. Attatch to the controller with blue tack. Can be…
I was pretty annoyed with the PSVR2 not having any built in head strap audio, so I picked up a Vive DAS on Black Friday for 16$ and used the headphones for this. I tried to position them so that they float over your ears like the Index.…
Thinner version of the facial interface replacement by LonnyKThinner version of the facial interface replacement by LonnyK. Gets you closer to the lenses; about 5mm.
Tracking with the PS Camera for Playstation VR is improved if the camera is elevated. The included camera stand can be placed on top of your TV but requires you to be directly in front of the stand, in my living room I sit off to the side…
Remixed for those who would like to mount it to their sim rig. Use 6mm hex bolts.
In this remix more room was added in the spool while also increasing strength at attachment point at base to decrease potential breakage. Height was increased in wire channel to accommodate both the aux plug and earbud wires. Note: photos…
It's recommended to print this flat side down with no supports. Make sure “Bridge counterbore holes” is set to “partially bridged” in Prusa/Bambu/OrcaSlicer so that the bridge layer is printed properly. For other slicers maybe just use…
this is a fork of printables.com/model/1507930-psvr2-replacement-facial-interface-with-optional-i i fxxxking hated how the mask clips was designed so silly, because i printed the mask and broke it immediately. so redesigned a bit and made…
Kostka 2x2cm pro procvičování nebo zkoušení vyjmenovaných slov po B,L,M,P,S,V.
Easy to print, minimal Skadis holder for Playstation PSVR2 to PC adapter
Hello, Today I have a holder, stand for the PSVR camera playstation 4 (V2) for you. It is suitable for a table or a shelf. It holds beautifully, even in the position when you turn it. It can be adjusted nicely. It is better to stick the…
This is a remix of the original clip with fixed dimensions, so it fits the remote snugly. Print settings don't matter all that much for this object, but for what it's worth I used 15% infill with a layer height of 0.2mm for my print.…
PSVR2 Headset front scan for making custom mounts. Scanned with a Creality CR-Scan Raptor with an accuracy of 0.1mm. It could be more accurate than this, but I ran out of RAM with a 0.02mm settings so that's all I can do. In case you're…
Will fit either Sense controller, print two! No supports needed! Printed in PLA at .2 structural on a MK4S.
Attach your PSVR2 to the Meta Quest 2 headstrap for next-level comfort! This simple 3D printed adapter securely mounts your Quest 2 onto the Meta Quest 2 headstrap. Designed for the Meta Quest 2 headstrap and PSVR2 Snug, secure fit…
This is a simple mount for a PSVR (1) break out box. I printed it in PLA using regular settings, 20% infill, flat side down with supports. There's no screw holes since I used double-sided tape to mount
Please look at the original: Playstation VR2 (PSVR2) Headset Stand (updated Mar 4) von psybertech | Kostenloses STL-Modell herunterladen | Printables.com
The design was originally intended for mounting with flat head (chamfered) #6x1" wood screws, however alternatives with solidified, enlarged bases and insets are provided to enable mounting with double-sided tape. Note that the insets on…
The PSVR headset was laying on the floor so I thought of 3d printing a hook that could be attached to the IKEA furniture. I did not want to use screws, so I created it large enough to support the headset. remember to use silicon, is very…
Wall mount Bracket for the older Square style Camera. Designed so the it sits on top and the last bend comes out to lock it in place. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/9UhxVgB54Bi…
A very simple model to fix the new PSVR2 adapter below your desk. Screw holes are for 4x16 screws. Anything with a screw head diameter above 6mm should work.
Since the release of the PSVR2 I have been searching for knuckles straps for its controllers, and there have been none,
I printed this with PETG standard settings. I've included the STEP files so that the leg height can be modified as needed. I did NOT glue the pieces together. The stand was intended to be able to be disassembled and reassembled to put it…
incorporated lower mount for top or bottom
PSVR CAMERA MOUNT REMIXED WITH FULLY PRINTABLE G CLAMP.
Hello, Today I have a Holder, Stand for PSVR Camera PS4 (V1) for you. It is suitable for mounting the V1 camera. It holds beautifully, even the position when you turn it. It can be adjusted nicely. It is better to stick the base to the M3…
Print two times, one mirrored, for left and right hand side. Should be easy to customize if Headset does not fit. Headset connector just print two times, one mirrored Connector_Ziptie print two times, one mirrored use two zipties (max…
This is a remix of the “PSVR2 IEM/Earbud Adapter” by s16n. Thank you! My version makes a few quality-of-life improvements: Wider cable channel so the earbud cable can loop back and forth up to four times without binding Corrected hole…
If you wear thick specs like mine and want to stop marking your psvr lenses with your glasses then print 2, these are blu-tacked or double sided taped onto either side of the lens and stop specs from contacting the lens. Also holds your…
The mount is as per the original design by therippa. I have just added a 3d printed nut to save having to add any additional hardware. Print instructions Category: Computer Summary The mount is as per the original design by therippa. I…
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3045130 Instructions Using the following options: faces_segment = 6 textstring1 = DevOps…
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3045130 Instructions Using the following options: faces_segment = 6 textstring1 = DevOps…
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3045130 Instructions Using the following options: faces_segment = 6 textstring1 = DevOps…
A quick Stand designed to hold a charger. Still needs work but its functional. Category: Gadgets
Adapter for PSVR2 wallmount hanger to Kallax
Can be printed without supports, but I needed a 3mm brim to keep it from coming off the print surface. I printed with 20% infill, with modifiers at the screw holes to have those at 70% for more strength.
I needed an under desk mount for my PS4 VR processor unit. I needed it to hang lower than the surface it was mounted on, so it would clear the lip on the front of the desk. This is for the second version of the PS4 VR processing unit. The…
Designed for 1.5" T-Slot extrusion. Required hardware: 4x M8 14mm hex socket head screws (16mm works too, in a pinch) 4x M8 T-nuts 2x M4 16mm - 20mm screws Print the base with supports for the underside. Attach top to base with 2 M4…
Hello, Today I have for you a Holder, a stand for the PSVR camera ps4 from v2 to v1. It is suitable for attaching the V2 camera to the V1 camera. It holds beautifully, even the position when you turn it. It can be adjusted nicely. It is…
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation…
The top strap model remixed from LonnyK's DAS mount, with the strap loop shrunken to better fit the Rift CV1 top strap. Like the original model, the original halo strap must be removed. You will need the same screws attaching the original…
PSVR camera mount with no need for screw or tape, hold the camera on top of your TV by it's own weight. Measure the thickness of your TV, and the angle of the camera. Print 2 of these and just put them on your TV! Category: Video Games
Use VHB tape or similar double-sided adhesive (hi-temp hot glue probably work fine) to bind to the halo. 3M VHB tape is a pressure-activated glue/tape hybrid that can still be removed if needed. Superglue fails to adhere to the…
My original window fastener broke due to the window not being locked in it, and a gust of wind smashed the window against it. I needed a replacement, so I modeled it. I also wanted the window to be more open, but didnt want to risk…
You might want to print it with 50% infill with 3 shells Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 50% Filament: pla Category: Video Games
I wanted to create a pimax headstrap which would have more adjustment then the vive das & would allow me to use my own headphones. I took a headstrap from a broken psvr & created a headstrap adapter which has at least some adjustment on…
this is a rough model, it needs to be finished
I really liked the design by awarring300, which was continued upon by 3lacksky, but they were too big to print on my Prusa I3, so i decided to split up the handles in fusion360 so i could print them separately. Post-Printing Just acetone…
Modified in Windows 10 3D Builder, made the 2 slots for the HDMI/Power Plugs wider as the provided ones in the original were way to narrow for me. REMOVED cut-outs for cleaner prints and not bombarding the poor printer with retractions.…
Modified in Windows 10 3D Builder, made the 2 slots for the HDMI/Power Plugs wider as the provided ones were way to narrow. Added cut-outs for less material use to the main body. Made the clip more flexible and replaceable, because mine…
I had a set of Kiwi clip-on headphones lying around from when I used the Quest 2, so I figured I could put them back to use on my current headset! These press a good bit on your ears, so you get a pretty solid sound from them. To attach…
This is just a small simple box to contain the PCB and a Wemos D1 mini from the P1 reader project over at github. https://github.com/psvanstrom/esphome-p1reader The fit is pretty tight and when inserting the PCB you ned to push the back…
A friend of mine uses a PSVR2 for social VR, and was missing out on the newer haptic functionality. I figured actually mounting the motor was a bit more secure than just hot-gluing it on, so I designed this, keeping face tracker…
![Generic handheld stand [PSP, PSVITA, STEAMDECK, 3DS]](https://media.printables.com/media/prints/581583/images/4642614_437abe6c-c39c-4b2f-b2ba-bd2898c4f4e0/photo_2023-09-13_17-43-21-2.jpg)
