iQless Wall Mount Spool Holder
A spool holder designed to be put on the wall by putting a couple of wood screws into a stud :)
- Pobrania
- 593
- Polubienia
- 59
- Ocena
- 5
18 modeli
A spool holder designed to be put on the wall by putting a couple of wood screws into a stud :)
This is an ear saver for masks. This print can be printed upright so you can print more at a time. In fact on an i3mk3 you can print 45 in one go :) Print instructions The 3mf files have setting to run the first 2 layers slower to help…
Another simple spool holder to go on a Prusa i3MK3 bar. It can be one sided or two :)
Nothing fancy, just a simple case to protect the remote from the occasional fall. I made two versions, a thin one that can be used with hard plastics like PLA, ABS, PC or Nylon and a beefier one to be used with TPU (works with hard…
A PS5 controller holder, which uses the tablemount positioning pins on the TV to fix the holder in place. You can only use this when the TV is NOT using the table stand, since it uses the 2 holes and steering pins when mounted to the TV.…
Waveshare 7inch QLED HDMI display case You will need: 6x M3x3.9x4 inserts (Ruthex M3S) 6x M3x12 tapered screws 4x M4x5.5x4 inesrts (Ruthex M4S). For better VESA mount strength, mount M4 inserts from the inside, so they are not easy to…
Desktop Waveshare 7HP-CAPQLED display enclosure with RPi Zero 2 W mount inside Needs 8x 8mm M3 screws. Fits these cables/adapters: Vention Reversible 90° micro USB cable Waveshare Right-angle HDMI Plug Adapter Waveshare Straight Mini HDMI…
Model info MK3S+ LCD Cover with an additional Waveshare 7HP-CAPQLED display Needs 5x 8mm M3 screws (in addition to the screws and nuts used for the original cover). Fits these cables: Vention Reversible 90° micro USB cable Waveshare…
A custom whistle. Customized in OpenScad
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a case for the 7 inch Waveshare 7HP-CAPQLED display , a budget quantum dot touch screen. There is an optional back panel that supports VESA 50/75/100. You can find a colour 3D preview of the model with optional AR…
Just include lemon juice Copper pennies Zinc coated machine screws 1/4"-20 1 in long should work Some alligator clips to connect it all A small LED You should be able to get a 4 V battery and that can light up a small LED :)
Requires trimming screen mounting points to fit the screen
This is a simple wall mount system I created to mount my 3D printed chains :)
I had some issues with taller prints using my old spool holder so I made this extended one. I used the hex pegs to align and give strength then glued it all together with 3D Gloop
I removed the bottom tab as it was too thick for some cases I used the screws that came with the card, I don't know what size they are. The holes are 2,5mm Also check out my Fan Bracket…
Hope this helps someone. To mount it to a wall, first screw the mount to a wall, then use M3 screws and M3 hex nuts to lock the display in from the corners.
Printed at 0.15 layer height Change filament at 1.70 (White) 2.75 (Red) 3.20 (Black)
Designed for a Noctua NF-A4x10 FLX, but should fit with any 40x40x10mm fan Also check out my PCIe Bracket https://www.printables.com/model/1403187-qlogic-qle8142-ibmx-pcie-bracket