Wyniki wyszukiwania: race

Sortowanie

4258 modeli

P
PrintablesLeo Saraja

Project Hail Mary - Eridian Grace Sculpture Model

I did not make this model, but decided to upload it here so it is preserved. Just in case it gets deleted from official site ( https://projecthailmary.com/ ). 3D Model Print Instructions: Grace Sculpture Keychain This model includes two…

Pobrania
28 485
Polubienia
1871
Ocena
4,92
P
PrintablesBryan

Race Car

A race car that'll fit a hot-wheels track. Overall dimensions are at scale of a typical car of this type. Movable wheels with a 0.3mm gap that most printers can handle. Version 4 has the wheels lowered (body raised) by 1mm and front wing…

Pobrania
12 840
Polubienia
751
Ocena
4,54
P
Printablesraykamp

Prusa i3 MK3s black PSU replacement frame brace with M4 bolt holes

This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…

Pobrania
11 350
Polubienia
450
Ocena
4,94
P
PrintablesOuky1991

SCARBO SVF1 Race Car Model

Scarbo SVF1 Model has functioning doors, suspension, steering, shifting and moving engine pistons. Based on a modern replica of 1967 Ferrari 312 Formula One. No supports, except for the exhaust pipes. Everything is designed to be simply…

Pobrania
11 113
Polubienia
4183
Ocena
4,85
P
PrintablesQrome

Roman Terrace Garden Succulent Planter

Roman Terrace Garden for your succulents? Yes, another succulent planter for your desk or home. The raised middle container is a great mid level water feeder to the side containers. This was printed using Gray PLA at a resolution of 0.2…

Pobrania
8302
Polubienia
3122
Ocena
4,96
P
PrintablesFilliFuu

Lucky Charm Baby Flexi Dragon Bracelet

Cute baby dragon bracelet, multiple profiles including A1 mini with various sizes for adults or children. All print in place without supports and that's it. Carefully open the mouth to use the link. Avoid using silk for the mouth as silk…

Pobrania
6936
Polubienia
918
Ocena
4,67
P
PrintablesVít Budina

Print in Place Race Car

This model can be printed all in one piece, with wheels that spin after you remove it from the printbed. It's an imaginary racecar inspired by several real-life vehicles. The main shape resembles the Nissan R90C, the back and the spoiler…

Pobrania
6748
Polubienia
507
Ocena
4,92
P
PrintablesCore3D.tech

TPU Bracelet

simple but very expandable and tough bracelet. Flexible Filamanent ONLY! I was asked to make a hollow version of this to add some glitter inside. I've added the hollow version file as well (walls and corners do get thin but he was able to…

Pobrania
6352
Polubienia
460
Ocena
4,91
P
PrintablesFilliFuu

BASIC LUCKY CHARM BRACELET

Basic profile containing over 9 sizes, new improved links and lock, easy to print with no bridges in the links. This is the standard, non dragon or unicorn bracelets, completely new and improved, with new facial designs, link design and…

Pobrania
5970
Polubienia
1566
Ocena
4,6
P
PrintablesKurtM

Formula 1 Race Tracks (2016-2026)

If you would like to buy a set of these laser cut from acrylic feel free to contact me via [email protected] I've modeled the track outlines for every circuit Formula 1 will go to for the 2026 season Edit 1/9/2018 I fixed the scale for…

Pobrania
5877
Polubienia
434
Ocena
5
P
Printablesagepbiz

Surprise Egg #8 - Tiny Racecar

Print-in-place and Articulated Surprise Egg #8 - Tiny Racecar 'Making of' video: https://youtu.be/DxNNB9PW3\_0 This is not the most complex Surprise Egg I have made in this series but it sure is the smallest :) The racecar and the egg was…

Pobrania
5841
Polubienia
973
Ocena
4,82
P
PrintablesPrusa Research

Finger Brace (splint)

Finger Brace (splint) Suitable for broken or dislocated middle segments and fingertips, or for post-surgery recovery of these body parts. When elongating the brace in the slicer (scaling it up in the longitudinal axis) so it extends to…

Pobrania
5574
Polubienia
1122
Ocena
4,83
P
PrintablesPrusa Research

Wrist brace (splint) - a lighter version

Wrist brace (splint) - a lighter version A lighter and less rigid brace, suitable rather for relieving pain caused by a sprained wrist or post-surgery recovery. Not suitable for fractures. Use undercast padding, fixated with velcro straps…

Pobrania
5393
Polubienia
1261
Ocena
4,95
P
PrintablesBaGooN

Chain Link Bracelet

A chain link bracelet that you assemble yourself by snapping the links together. For me, 11 links made the perfect fit. Use 15mm per link as a guide and adjust the number of links according to your wrist size. A smaller version with 13mm…

Pobrania
4920
Polubienia
1306
Ocena
4,73
P
PrintablesBrolin Workshop

Prusa Mini Z-axis brace

Z-axis brace to stiffen up the Z-axis of the Prusa Mini 4pcs M5x12 and 4pcs t-nuts for mounting, optional is a M5 washer (10mm OD , 1mm thick) Thick version need 2pcs M5x25 and 2pcs m5x12. UPDATE : Added .f3d file for remixing purposes..…

Pobrania
4880
Polubienia
985
Ocena
4,93
P
PrintablesWhitespace

FPV-Wing-Racer (rev.2)

Print. Fly. Crash. Repeat. Round 2! ----------------------- After the initial version has been out for some time now. It's time for some improvements, thanks to some feedback from the community I got rid of the click-in system and…

Pobrania
4740
Polubienia
3719
Ocena
4,91
P
PrintablesErik

Updated: Bracket bundle: 14 L-brackets and 16 corner braces (3mm and 6mm thick versions)

I made this bundle of brackets so you can print your own when needed. Both L-shaped brackets and corner braces, inside and outside versions. All brackets are 3mm thick, with a 6mm thick version for extra strength when that is needed. The…

Pobrania
4647
Polubienia
1403
Ocena
4,94
P
PrintablesPolly-Jeanius

Hotrod Racer Balloon Car

Remix of ‘Hot Rod Balloon Rocket Car’ by VF: https://www.printables.com/model/229851-hot-rod-balloon-rocket-car VF’s original hotrod design is really cool, I’ve just simplified the air exhaust channel and added an easy-blow mouthpiece to…

Pobrania
4427
Polubienia
770
Ocena
4,74
P
PrintablesVictor

Prusa MINI Z-Axis Support Brace

A support brace for the Prusa MINI to stiffen the connection between the Z-axis and the Y carriage. Attach to the 3030 aluminium extrusions using M5 x 12 mm hexagon head cap screws and T nuts (available on Amazon, eBay, AliExpress, etc.).…

Pobrania
4320
Polubienia
841
Ocena
4,93
P
PrintablesPrusa Research

Finger extension brace (splint)

Finger extension brace (splint) Suitable for treatment of injured extensor in the fingertip (i.e. “mallet finger”). Total fixation period of 6 weeks. Also suitable for fractures of the fingertip, which lead to the same symptom - finger…

Pobrania
4158
Polubienia
987
Ocena
5
P
PrintablesCadeyzDad

Double Stack Race Mag Pouch fits Glck Canik M&P CZ Sig Taurus USP9 Colt 2011

Double Stack Mag Pouch for left hand loading. This is designed to work with ELS and now also Tek-Lok mounting systems. If you have a gun that I don't have a pouch for just measure the magazine with your calipers (LxW in 3 different spots)…

Pobrania
3771
Polubienia
618
Ocena
4,95
P
PrintablesM4NU

Unchain My Heart - Print in place bracelet

A simple and fast printed bracelet with heart looking rings and a simple lock system. 3 sizes : 170mm (11 hearts) 200mm (13 hearts) 230mm (15 hearts) Some ideas : Print 2 sizes to make intricated bracelets. Clip several bracelets together…

Pobrania
3739
Polubienia
686
Ocena
4,78
P
PrintablesKalleKnall

Prusa MK3/S Einsy Raspberry PI 4B/3B Enclosure with support Brace

I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…

Pobrania
3398
Polubienia
714
Ocena
4,8
P
PrintablesEndK7

Graceful Dragon - Articulated - Print in Place - No Supports - Flexi - Fantasy

I'm very glad to present you the brand new articulated graceful Dragon 🐲 Cute, Elegant and a lot of details are some characteristics of this Dragon. It has powerful twisted Horns and a grooved tail. This Dragon is very flexible and easy…

Pobrania
3308
Polubienia
583
Ocena
5
P
PrintablesPrusa Research

Wrist brace (splint) for either hand

Wrist brace (splint) for either hand A more rigid brace, suitable for broken wrist treatment, i.e. fracture of either the adjacent radial bone, ulnar bone, or wrist bones (excluding the scaphoid bone fracture, which requires fixation of…

Pobrania
3297
Polubienia
893
Ocena
5
P
PrintablesMikolas Zuza

PSU replacing brace for MK3

If you remove the PSU from your MK3 (for example to place it outside of an enclosure), you can use this brace to maintain the frame stiffness. This was tested with the older silver PSU mount Print instructions Prints without supports

Pobrania
3232
Polubienia
192
Ocena
4,89
P
PrintablesRepoholy

Floral jewelry: Daisy - A set of earrings, bracelet and necklace

A set of floral jewelry. Available with mounting hole at the top of the blossom or included in one of the petals. You can choose from 4 daisy sizes. Dimensions Thickness: petals are 1 mm and 1.5 mm thick the middle is 1.5 mm thick → The…

Pobrania
3030
Polubienia
620
Ocena
4,88
P
PrintablesGregzy

Cables raceway (duct)

A simple cable organizer when you really have to many cables to manage. The design is similar to what you can find in computer room (usually it is several meters in length and you cut it to size, but here we are limited to the print bed…

Pobrania
2801
Polubienia
772
Ocena
4,96
P
PrintablesKN16

PP MCXish Folding Brace

A folding pistol brace inspired by the legendary Sig Sauer MCX Thin Folding Stock. It attaches to anything with a Picatinny rail and is a stylish accessory to your favorite PDW. There are detailed printing and assembly instructions under…

Pobrania
2751
Polubienia
215
Ocena
5
P
PrintablesRetro Frog

Gamecube GC Video Support Brace for Carby, Prism and GCHD mkII

Have you noticed that the popular GC Video HDMI dongles for the Gamecube sag when a heavy HDMI cable is plugged into it? This simple brace latches onto the Gamecube vents below the Digital Video port and support the dongle from sagging.…

Pobrania
2696
Polubienia
156
Ocena
5
P
PrintablesVincent

LEGO Technic 42141 McLaren Formula 1 F1 Race Car Wall Mount

New for 4/24/24 - Minimal versions! Use the minimal versions to save time and filament if you don't intend to use a spacer. About The vertical mount supports nose-up or nose-down. The horizontal mount supports nose-left or nose-right. The…

Pobrania
2686
Polubienia
317
Ocena
4,95
P
PrintablesPrusa Research

Palm brace (splint)

Palm brace (splint) For fixating the wrist and palm (metacarpal fractures). The brace must be shaped into a neutral position, to prevent the shortening of tendons and ligaments and placed on the FRONT side of the forearm (see picture). If…

Pobrania
2653
Polubienia
714
Ocena
5
P
PrintablesAlexM

Flexi bracelet (fun bracelet for kids)

My daughter wanted to wear AP_Design 's the flexetki toy as a bracelet, so I combined it with Mistertech 's Strap buckle (the only buckle I could find that prints flat) into a sort of bracelet. You can find my second model, that can be…

Pobrania
2578
Polubienia
343
Ocena
4,89
P
PrintablesSTLLabs

1:8 SCALE - 1967 FORMULA RACECAR

LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY! THE FORMULA 1967 RACECAR is a large 1:8 scale display model inspired by vintage 1960s formula racecars. MAKEABLE FOR EVERYONE: Largest single part: 95 x 83 x 199 mm (Further…

Pobrania
2497
Polubienia
573
Ocena
5
P
PrintablesDvG3DAtelier

Chain Link Bracelet – Slim, Reversible Jewelry, Adjustable and more Secure Fit

This remix of the original chain link bracelet is slimmer and thinner, yet still provides enough space to showcase eg. the carbon pattern. The smoother design reduces skin friction for more comfortable wear. It offers a stronger assembly…

Pobrania
2448
Polubienia
811
Ocena
5
P
PrintablesBlargedy

Pastamatic Filament Spool Winder Modifications: Braces and 5kg Spool Support

Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…

Pobrania
2393
Polubienia
262
Ocena
4,89
P
PrintablesFilliFuu

Lucky Charm Flexi Unicorn Bracelet

Unicorn bracelet similar to the dragon bracelet i designed earlier. All print in place without supports. All files painted, just erase painting or change if you want a fast print or allow adaptive layers for more detail. Enjoy.

Pobrania
2393
Polubienia
345
Ocena
4,67
P
PrintablesMiceciCZE

ROBAK 2 Super Bright LED BRACE

Super Bright LED Light Bar RC Car Roof Lamp CH3 Control for 1/10 RC Crawler Axial Capra SCX10 II 90046 RGT EX86100 TRX6 TRX4 D90

Pobrania
2279
Polubienia
35
Ocena
0
P

Flexi Love Heart Bracelet | 11 Sizes

I added 💕 hearts 💕 and a buckle to my Flexi Keychain Fidget for Valentine's Day! With 11 sizes to choose from you'll find the perfect fit for your SO! 💕 The 12 link bracelet is long enough to fit comfortably on my adult wrist, and the 10…

Pobrania
2224
Polubienia
476
Ocena
4,78

Pony bead | Standard 6mm x 9mm | Beads for friendship bracelets and other beaded crafts! | Filament swatches

I recommend making these with silk PLA filament for extra shine ✨ Print settings: 0.2mm layer height 0.4mm nozzle Compatible with my other models: Craft Tweezers Beedle Friendship Bracelet Making Tool ✨If you like what I do✨ Follow me for…

Pobrania
2174
Polubienia
450
Ocena
4,88
P
PrintablesPrusa Research

Pinky finger/thumb brace (splint)

Pinky finger/thumb brace (splint) Suitable for fractures of the fifth metacarpal bone, to stabilize injured ligaments of the metacarpophalangeal joints (between fingers and a palm). Depending on the length, it can be also used to fixate…

Pobrania
2125
Polubienia
544
Ocena
5
P
Printableshapedevee

Simple gantry support (metric/inch), Z-brace for Ender-3 V3 KE/SE

For all information and recent models look at https://www.thingiverse.com/thing:6516352 .

Pobrania
2104
Polubienia
565
Ocena
5
P
Printablesmirabatek

Formula 1 Race Car (2023) Building Kit

Overview: Introducing the Formula 1 race car building kit, perfect for young engineers and racing enthusiasts! This kit features 11 precisely crafted parts and 9 screws, designed for easy assembly and disassembly. The construction process…

Pobrania
2091
Polubienia
576
Ocena
4,63
P
PrintablesCodeweaver

Friendship Bracelet Loom/Station

This loom/station will allow you to more efficiently make friendship (macrame) bracelets. Especially the more complex patterns with 10+ strings. Suggested use : The bottom arc has 50+ slots to fasten the strings quickly. They are held in…

Pobrania
1999
Polubienia
479
Ocena
4,8
P
PrintablesdePrintinator

Flexy Hexagon Bracelet Remastered (TPU/PLA)

Filaments Flashforge Burnt Titanium PLA Hatchbox Sparkle Gray PLA Overture Black TPU Print Settings Base settings were the "0.20mm DETAIL" preset in Prusaslicer for Original Prusa XL - 5T 0.6 nozzle profile. I modified the following: 3x…

Pobrania
1941
Polubienia
387
Ocena
5
P

APB3 - Adjustable Pistol Brace

This project is currently in BETA (as of April '24) Specifically, the longevity and durability of the PLA+ printed locking pin needs to be further tested. UPDATE: A new experimental Reinforced Locking Pin has been added to the print…

Pobrania
1890
Polubienia
225
Ocena
5
P
PrintablesM4NU

Skull Chain - Print-in-place bracelet

A simple and fast printed bracelet with skull looking rings and a simple lock system. To open/close the bracelet : clip one side and then the other one. There is a hole in one tooth to spot the skull with the locks. 3 sizes : 185mm (9…

Pobrania
1790
Polubienia
616
Ocena
4,76
P
Printablesdevin3ds

race car

race car if you have any issues put them in the comments and ill get back to you as soon as possible.

Pobrania
1710
Polubienia
164
Ocena
4,71
P
PrintablesBugman_140

The Final Embrace

Here are the files for The Final Embrace A bust of Death himself, the Reaper prints separately from the base to allow different materials to be selected. I printed my Reaper with a little support painted under the jaw bone and 5% infill…

Pobrania
1621
Polubienia
515
Ocena
4,97
P
PrintablesP-atix

Vespa Cafe Racer

Model Vespa 150 Super (1965) It's not exactly scale model but is optimised for easy print with no supports. It is better to glue the pins, but it is not necessary. Printer setup: Nozzle diameter 0,4 Layer height 0.20mm 10-20% infill No…

Pobrania
1611
Polubienia
247
Ocena
5
P
Printablesroman_hegglin

Bracelet - Voronoi Style

Another voronoi bracelet! There are four different Models: A-D A is rough, B-D have a finer Voronoi-Mesh. (See preview!) Category: Bracelets

Pobrania
1603
Polubienia
284
Ocena
4,5
P
PrintablesEd Daniel

Corner brace for IKEA Besta cabinet

My Besta cabinets were anything but rigid. Aligning the doors on the front of them was next to impossible! So I whipped up this corner brace in Onshape. You probably don't need one on each corner. Even one makes a difference, but two on…

Pobrania
1567
Polubienia
245
Ocena
5
P
PrintablesM1Designs

Project Hail Mary - Ryland Grace Model

I did not make this model, but I would have liked to. The movie is amazing and this print is also awesome.

Pobrania
1564
Polubienia
77
Ocena
5
P
PrintablesSeanZep

Print-In-Place Chain Link Bracelet

A print in place chain-link bracelet. Requires good build plate adhesion. I added a split version for people that have smaller build plates. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution:…

Pobrania
1542
Polubienia
216
Ocena
5
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
1459
Polubienia
309
Ocena
4,75
P
Printablesprintndrive

DIY RC GoCart - TableRacer

Yet another smaller model; this time a GoCart! I've made a larger one in the past but decided I wanted to make a smaller one for indoors. Thus the TableRacer was born! The TableRacer utilizes standard N20 motors and the standard 9g servo…

Pobrania
1436
Polubienia
469
Ocena
4,89
P
PrintablesDonaldSayers

Sidewinder X2 Simple brace

Quick remix of this brace to fit the new screw hole position of the sidewinder X2. To be clear this will not fit with the second part of the brace from the original (threaded rod.) There are now braces that fit correctly for the X2 if…

Pobrania
1418
Polubienia
149
Ocena
5
P
PrintablesLukeSkywalker

Porsche 911 GT3 CUP 992 Silhouette Wallart / GT, Racecar, DTM, GT-Masters

English version, German version below Description: Pictures are a wonderful way to fill empty walls. However, one can quickly get tired of looking at the same picture, not knowing exactly what to hang on the wall, or not wanting to invest…

Pobrania
1398
Polubienia
181
Ocena
5
P
PrintablesSTLLabs

2024 Mini Racer

LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY! THE 2024 MINI RACER is a mini version of our 2024 racecar. SIZE / WEIGHT: Total assembly: Roughly 90 x 40 mm Filament: We used roughly 12 g of filament using 5% infill.…

Pobrania
1386
Polubienia
151
Ocena
4,62
P
PrintablesPlexi

Survival Bracelet

Lost in the wilderness? A few feet of paracord for making a bow drill fire set or for a thread to fish with might save you. This bracelet gives you 7 feet of paracord right on your wrist. Both styles of buckle are remixes of designs used…

Pobrania
1386
Polubienia
329
Ocena
4,72
P
Printablesfixumdude

Fixum Dude Motors Print in Place Racecar

Introducing the FDM (Fixum Dude Motors) print in place racecar. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from the…

Pobrania
1375
Polubienia
252
Ocena
4,98
P
PrintablesJason Walton

Ender 5 Cable Management Brace

The Ender 5 comes with a bunch of zip-ties for tying up all your cables neatly, but anyone who's actually tried to do this knows that the cables are all just a little bit too short. I was thinking about adding extension cables to my…

Pobrania
1365
Polubienia
269
Ocena
4,81
P
PrintablesMongrel

Centauri Carbon PTFE Brace Bracket.

I've made my mod interchangeable with Ccraft3D design so you can take your pick of which pieces suit your needs.

Pobrania
1348
Polubienia
250
Ocena
5
P
PrintablesGeekMomProjects

Lucky 4-Leaf Clover Bracelet (Print in Place)

NOTE: I've updated this print with versions containing looser tolerances that may work better for some printers. The angled leaves of the clover-shaped links on this print-in-place bracelet look very nice when printed in dichromatic PLA,…

Pobrania
1341
Polubienia
251
Ocena
4,89
P
PrintablesVader

Project Hail Mary Grace Figurine

I 3D printed “Grace” from Project Hail Mary using a free model straight from the official movie website.

Pobrania
1340
Polubienia
52
Ocena
5
P
PrintablesParagon

Cable Raceway Conduit - Listwy Elektroinstalacyjne

Do pobrania Listwy Elektroinstalacyjne, do maskowania przewodów i kabli, listwy dodaję o długości 250mm i w następujących rozmiarach wewnętrznych: 1 . Wysokość 10mm i szerokości ( 15mm, 20mm, 25mm, 30mm, 40mm i 50mm) 2 . Wysokość 15mm i…

Pobrania
1332
Polubienia
220
Ocena
4,8
P
Printablesburtronix

Geo-Cube Necklace-Bracelet with Twist-Lock Clasp

Geo-Cubes are interlocking print-in-place cubic shapes that I designed & posted last year. I've been experimenting with scaling them to different sizes & arranging them on the print bed in different ways to get longer lengths of…

Pobrania
1325
Polubienia
266
Ocena
4,67
P
PrintablesBrite Minis

Elite Saracen Spearman 28mm (supportless, FDM friendly)

Elite Saracen Spearman. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The mounted spearman…

Pobrania
1318
Polubienia
141
Ocena
5
P
PrintablesEnhe

Flexible Chain Bracelet

These bracelets feature a chain-like design, offering flexibility and adaptability for various uses. Their bendable structure makes them ideal for projects requiring a non-rigid connection or decorative elements. Durable yet flexible,…

Pobrania
1311
Polubienia
199
Ocena
5
P
PrintablesCisco3D

Soft Bracelet

Flexible bracelets that prints in Vase mode. A quick print that looks very nice Prusa PETG Yellow gold showing Some designs to pic from Scaling reference (roughly) 100% ----- 60mm Diameter 115% ----- 70mm Diameter 130% ----- 80mm Diameter…

Pobrania
1306
Polubienia
305
Ocena
5
P
PrintablesMakkuro

Print-in-place fidget bracelet / bangle

Have fun with this rotating fidget bracelet! It consists of two parts which can rotate freely around each other. I uploaded many sizes (inner diameter in mm from 54mm to 83mm, please use the conversion table below in case you are used to…

Pobrania
1279
Polubienia
222
Ocena
4,83
P
PrintablesDaHouzKat

Prusa MINI Z-axis brace REMIX

This is a remix of the original Prusa Mini Z-axis brace published by Hannes-b3 Small groove to fit with the Prusa Mini Low Profile Z axis Squash Ball by 4nthonylin Bigger holes to fit with M5 Hex Socket Head Cap Screws Added model Ultra…

Pobrania
1277
Polubienia
295
Ocena
4,91
P
PrintablesT4SKOR

Bracelet

If you can Buy me a coffee :)

Pobrania
1272
Polubienia
171
Ocena
4,5
P
PrintablesJack

Chain Bracelet

PrintInPlace bracelet chain

Pobrania
1244
Polubienia
231
Ocena
5
P
PrintablesJoe3D

Print in Place F1 Race Car

Print in Place on one side and start your engines!!

Pobrania
1218
Polubienia
101
Ocena
4,95
P
PrintablesHenlor

Creality K1 Cable Raceway Covers CAD

The step files is meant to be used as an asset in CAD software. But as it has a very simple geometry it can be printed in Vase mode. I added an optimized version for the vertical cover, cut in half and added an angle for the overhang on…

Pobrania
1218
Polubienia
248
Ocena
5
P
PrintablesPrusa Research

Big toe brace (splint)

Big toe brace (splint) Not suitable for walking! The brace is neither sturdy nor comfortable enough for that - only for fixation, but without stepping on the injured foot. For pain relief from non-dislocated fractures of the first or…

Pobrania
1209
Polubienia
426
Ocena
5
P
PrintablesAzumetrics

Cosplay Arm Bracer v1 (Djeeta Granblue Fantasy)

A cosplay armor/arm bracer in 2 parts. Need to be scaled to whatever size your arm is. This was the size that fit my slightly bigger arms. Also might be in an extremely tiny or large scale, might have to scale it up by 10000% or…

Pobrania
1207
Polubienia
522
Ocena
0
P
PrintablesNeozoen

Neo parametric frame brace

Update 20260914 I uploaded a fixed version as f3d and one .step-file with M5 bores. ____________________________________________________________________________________ The original design by VEZ3D looks awesome but i needed it in…

Pobrania
1205
Polubienia
223
Ocena
5
P
PrintablesGeekMomProjects

Print In Place Rotating Hearts Bracelet

A great print for Valentine's Day! The uploaded models of the bracelet have two sizes: 6 links (approximately 190 mm, 7.5") 7 links (approximately 215 mm, 8.5") You can remix the model to add more links or change the heart to a different…

Pobrania
1203
Polubienia
269
Ocena
4,91

SandPiper 1:8 Scale Baja race buggy - 2WD Rear Engine by Black Crow

SandPiper 1:8 Scale Baja race buggy - 2WD Rear Engine __________________________________________________________________________________________________________________ Are you new to Black Crow Prints? All the STL files are here free on…

Pobrania
1195
Polubienia
513
Ocena
5
P
PrintablesGP

Table angle bracket / corner brace (LACK-compatible)

Light tables like IKEA LACK family are not sturdy enough to withstand horizontal vibrations caused by a printer, they start shaking and wobbling worsening print quality, causing even more ringing, etc. This simple brace will make a table…

Pobrania
1189
Polubienia
196
Ocena
4,88
P
PrintablesUpdesky

Nurburgring Nordschleife, Nurburg, Germany, racetrack, circuit

Nurburgring Nordschleife, Nurburg, Germany, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…

Pobrania
1181
Polubienia
125
Ocena
5
P
PrintablesAAME

MFR - 3 inch FPV race drone frame - DJI Vista ready

It's an open source design. Videos: https://youtube.com/playlist?list=PLgceMsQyNMfT9rvlGa_Ch6L50eUYFBX7_ Git reposistory: https://github.com/alessandroame/MFR Carbon frame version: https://www.printables.com/model/486129 My goal is to…

Pobrania
1167
Polubienia
767
Ocena
5

Humeral Brace

This is a 3D printed humeral brace which is designed to increase effectiveness of the fracture treatment by providing customized solutions as an alternative to conventional solution. The inner and outer part of the brace ensure better air…

Pobrania
1167
Polubienia
395
Ocena
4
P
PrintablesShmoee

Friendship Bracelet Maker Braiding Loom

These disks are tools used for making friendship bracelets. I created 8 and 16 slot versions in Fusion 360. To use, start with 7 strings about a foot in length that are tied together on one end in combination with the 8 slot disk. Push…

Pobrania
1166
Polubienia
164
Ocena
4,88
P
PrintablesNikoFly

Bracelet making kit

Hello maker friends, here is my workshop design for making bracelets, paracord or other fantasy of all kinds, have fun young and old with this support designed to be practical for making bracelets!! entirely print on mini <3 filament :…

Pobrania
1161
Polubienia
831
Ocena
5
P
PrintablesJBoneng

Nike of Samothrace #ScanYourWorld

A 3d scan of a replica of the ancient greek sculpture “Nike of Samothrace” also known as “The Winged Victory of Samothrace”, a masterpiece from the greek Hellenistic era (around 200 BCE). The original resides in Louvre, Paris. Scanned…

Pobrania
1155
Polubienia
150
Ocena
5
P
Printablestimbarnes

Cable Raceway

UPDATED: A simple cable management raceway / comb to help keep wiring tidy. Designed in OnShape, based on a common wire management product. Top snaps or slides on to the comb / bottom piece. They can be easily cut to length as needed. The…

Pobrania
1143
Polubienia
121
Ocena
5
P
PrintablesByte Insight

Bezeller - Bezel Free Mounts for Sim Racers

If you have a triple screen set up on your Sim Racing rig and want to lose the black strip that occurs where your screens meet then this is the basis of a DIY Bezel-Free Kit. The original ASUS ROG Bezel-Free Kit was an accessory that…

Pobrania
1128
Polubienia
60
Ocena
5
P
PrintablesFilip

Lego Bracelet

Lego bracelet compatible with LEGO bricks. The bracelet is available in 2 sizes, but I also post all the elements separately if you want a different size. If you have any problem with the fastening, feel free to write to me and I will try…

Pobrania
1125
Polubienia
385
Ocena
5
P
PrintablesKalleKnall

MK3 PSU Bracket / Brace

Just an other Prusa MK3 PSU-Bracket / Brace. My Frame has a Skew-Value of 0.01 ! (Support Menue) Please have a look on my other Prusa MK3 Prints https://www.prusaprinters.org/social/1247/prints It fit's between Mainframe and Rearplate,…

Pobrania
1112
Polubienia
132
Ocena
4,7

FLSUN SUPER RACER SR - Double fan duct

Improved fan duct flsun super racer (the probe can fit)

Pobrania
1110
Polubienia
71
Ocena
4,9
P
Printablesjudysek

pavučina dekorace, spider web decoration for halloween

dekorace k vytvoření duchařské atmosféry

Pobrania
1110
Polubienia
114
Ocena
4,83
P
PrintablesUpdesky

Circuit de Spa Francorchamps, Stavelot, Belgium, Formula 1 Race Track 2022 Season

Circuit de Spa Francorchamps, Stavelot, Belgium, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…

Pobrania
1105
Polubienia
122
Ocena
4,83
P
PrintablesWinston Moy

xTool S1 Honeycomb Brace

I originally printed this in PLA since it doesn't need to be super rigid, a little compliance is good. However I would recommend PETG if you can. After a few months, PLA will creep and doesn't bounce back as much. Good amount of pressure…

Pobrania
1103
Polubienia
143
Ocena
5
P
PrintablesGodlikeOne

Mock Suppressor For Airsoft - 14MM Counter-Clockwise (CCW) Threads - Fits xCortech Tracer

I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…

Pobrania
1092
Polubienia
98
Ocena
3,67
P
Printableswimillie

Basic pla/tpu Bracelet

It be a bracelet A bracelet it be Turn your ears Listen carefully, This small bracelet Won't fit you If not made out of tpu! If you don't have tpu filament, the first version of this bracelet is not for you. Something very stretchy must…

Pobrania
1086
Polubienia
112
Ocena
4,75
P
PrintablesMTB3D

bracelet

A simpel bracelet designed by a friend of mine. Printed by https://www.mtb3d.com/

Pobrania
1058
Polubienia
142
Ocena
5
P
Printableseggy

Bracelet Holder

Two version of the bracelet stand, printable as a solid or a hollow stand. Both versions do not require supports. I printed mine out of Bambu Marble PLA which makes the layer lines virtually invisible. Printed on a BambuLabs P1S. Does not…

Pobrania
1051
Polubienia
144
Ocena
5