Neo parametric frame brace
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Copied the design from Vez3D and made a scalable version of it.
- Ocena
- 5 / 5
- Polubienia
- 220
- Pobrania
- 1194
- Wydruki
- 11
- Wyświetlenia
- 4200
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Update 20260914
I uploaded a fixed version as f3d and one .step-file with M5 bores.
____________________________________________________________________________________
The original design by VEZ3D looks awesome but i needed it in different sizes.
So I remodeled it in Fusion360 and made it parametric.
In order to change the size, I recommend to start at the upper values if you want to make it bigger, and at the lower values if you want to make it smaller. Otherwise some sketches might throw errors. If you get an error use the undo button rather than just putting in the previous value.
If you want to go a lot smaller (<150mm), you should also change the parameters for the screwhole offset, aswell as the fillet and the wall thickness for the inner side.
There are even more parameters for customization, even one to change the thickness so you could use them on 3030 extrusions.
If you like the design, please share your make. I love to see them :)