P
PrintablesDavid
Huevera para el frigorifico
Soporte para huevos para la nevera.
- Pobrania
- 43
- Polubienia
- 0
- Ocena
- 0
Wyniki wyszukiwania: rigor
Liczymy pasujące modele…
P
PrintablesPhillip Skoric
Trigorilla to SKr 1.3 - Anycubic 4max
This adapter plate is designed to mount a skr 1.3 controller board to the original mounting location of a trigorilla controller board and to maintain the original position as good as possible. The adpater board is designed for the…
- Pobrania
- 217
- Polubienia
- 8
- Ocena
- 5
P
PrintablesKyle Shields
Anycubic i3 Mega S Trigorilla to SKR 2 Adapter
Even though I re-designed it from scratch, this is pretty much a remix of Michelix's adapter found on Thingiverse https://www.thingiverse.com/thing:3629440 This adapter gives room to run cables underneath as well as add a right angle USB…
- Pobrania
- 168
- Polubienia
- 9
- Ocena
- 4
P
Printableslgndns
(v2.0) Trigorilla Motherboard Replacement Bracket for SKR 1.3 / SKR 1.4 / MKS SGEN L / MKS GEN L V2.1 Boards w/ Cooling Fan Duct
Trigorilla Motherboard Replacement Bracket for SKR 1.3 / SKR 1.4 / MKS SGEN L / MKS GEN L V2.1 Boards w/ Cooling Fan Duct Part Counts: 1 Main Bracket 1 Cooling Fan Bracket 4 Spacer Pipes Needed Supplies: 2pcs 5010 Fan 4pcs M3x30 Screw…
- Pobrania
- 80
- Polubienia
- 9
- Ocena
- 0
P
PrintablesSir Ged
Anycubic Trigorilla Board Template
Template for Trigorilla Board. Made this to add a shelf to an enclosure that mine went into for another build. Included a plate as well if you just want to cover the bottom of the board. Print instructions Category: 3D Printer Parts
- Pobrania
- 64
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJulien Mairy
Grigori Efimovitch Raspoutine — Bust
Grigori Efimovitch Raspoutine — Buste 🇫🇷 Description Ce buste représente Grigori Efimovitch Raspoutine dans une interprétation sculpturale classique limitée à la tête et au haut du torse, reposant sur un socle sobre et équilibré. Les…
- Pobrania
- 59
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMiguelB.
Balay refrigerator handle / Asa frigorifico balay
Balay refrigerator handle / Asa frigorifico balay
- Pobrania
- 59
- Polubienia
- 3
- Ocena
- 0
P
PrintablesLayer By Layer
Trigorilla Mosfet Case
I made a remix of this project: https://www.thingiverse.com/thing:1939819 I changed only 3 things: 1- The original uses 12mm m3 bolts and nuts. For this one you need 20mm m3 bolts. 2- Changed the base a little to allow more ventilation. I…
- Pobrania
- 42
- Polubienia
- 4
- Ocena
- 0
P
Printableswww.DaBastla.at
Anicubic I3 Mega Adapter Trigorilla to SKR 3
ABS-CF 25% Infill gyroid Wall and Bottom 0,8mm planed for M3 Inserts
- Pobrania
- 36
- Polubienia
- 4
- Ocena
- 0
P
PrintablesTopZenCat
FrigoRack 58/67
FrigoRack 58/67 is a practical and modular solution for organizing cans and bottles in your fridge. Designed to support 67mm and 58mm can diameters without wobbling, it also accommodates some glass bottles. The modular design allows parts…
- Pobrania
- 28
- Polubienia
- 5
- Ocena
- 0
P
Printablestyler
Melzi to Trigorilla
These are the parts I used to install a Trigorilla board (from an Anycubic i3 Mega S) in to a Monoprice Maker Select V1 that originally comes with a Melzi board. It should also work on the V2, the Wanhao Duplicator i3, and the Cocoon…
- Pobrania
- 27
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDryptuden
Trigorilla 2020 Mount
I was in need of a simple way to mount my trigorilla board to my Hypercube 2020 extrusion so i made this. Print Settings Printer: Hypercube Evolution Rafts: No Supports: No Category: 3D Printer Parts
- Pobrania
- 26
- Polubienia
- 1
- Ocena
- 0
P
PrintablesFritz We
Anycubic Kossel Trigorilla Board Frame with Cooling
The frame can be printed without support. See pictutres. The part for the fan and airflow was made with a minimum of support. See the left picture of the slicer picture. The airduct covers the TMC2208's perfect. No need to caulk. NOTE: I…
- Pobrania
- 24
- Polubienia
- 2
- Ocena
- 0
P
PrintablesLilMikey
TriGorilla/Heated Printer Bed Mosfet Case
Edit 9/8: One of the connectors on my TriGorilla mosfet melted and I replaced it with a smaller, cheaper version. It looks like there are two common styles, a 30A (similar to the original TriGorilla) and a smaller 25A which seems to be…
- Pobrania
- 23
- Polubienia
- 4
- Ocena
- 0
P
Printablesacorderob
Maneta Frigorífico (Fridge Handle) Bosch KSV33VL30-01
There are two revisions: With three M5x40 hex socket screws with square nuts. Preferred printing orientation in the red colored photo. With two M5x20 screws and two M5 threaded inserts. Preferred printing orientation in the green colored…
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMcMatt
TriGorilla mount for t-slot rail
Needed a mount for my TriGorilla heating controller MOSFET that I could mount on 20mm t-slot rail for my OpenBuilds based printer. I drew this one up in Fusion 360. I printed mine with 20% infill and 3 shells. Requires four M3 x 16mm…
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDavid
Soporte estante frigorífico Whirlpool
Se rompió la pequeña escuadra que soporte el estante de la puerta de la nevera, hice uno en PLA, lo pegué con Locktite y hasta hoy.
- Pobrania
- 15
- Polubienia
- 6
- Ocena
- 0
P
Printablessp3cialk
Trigorilla Mosfet Bracket
Bracket to mount Trigorilla Mosfet in front of PSU in original Control Box Print instructions Category: 3D Printer Accessories Summary Bracket to mount Trigorilla Mosfet in front of PSU in original Control Box
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAndrés R. Sola
Mango Frigorífico Fagor
Mango para congelador de frigorífico Fagor. Realizado en PLA
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJamesK1
PSU + TriGorilla Mosfet Case
This case was created to cover the open end of the power supplies that come with most 3D printers (in this case the Flsun I3 20A PSU. It's also specifically designed to hold the Trigorilla Mosfet, and a fused switch. Dimensions: Exterior…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJulien Mairy
Charles-Maurice de Talleyrand-Périgord Buste
Charles-Maurice de Talleyrand-Périgord Bust Charles-Maurice de Talleyrand-Périgord was one of the most influential diplomats in French history. A bishop, statesman, diplomat, and political strategist, he successfully navigated the Ancien…
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
PrintablesIW2HQV
PROFILO PROTEZIONE VETRO FRIGORIFERO
Profili per bordi di Vetro per protezione ripiani del Frigorifero, oltre che per estetica. Sono di Lunghezza 250mm Altezza 10mm e lo Larghezza 6mm, il taglio di incastro è da 3mm, lo spessore del Profilo è di 1,5mm. Per i miei Ripiani ne…
- Pobrania
- 6
- Polubienia
- 2
- Ocena
- 0
P
PrintablesNewworld3D
Fagor refrigerator lid-Tapa frigorífico Fagor
Lid of the first drawer of the fagor combi refrigerator-Tapa del primer cajón del frigorífico Fagor combi
- Pobrania
- 5
- Polubienia
- 3
- Ocena
- 0
P
PrintablesANdrea
Divisore per ripiani del frigorifero / Refrigerator shelf divider
Va assemblato incollando un bullone e un dado da 5 mm It is assembled by gluing a 5mm bolt and nut
- Pobrania
- 3
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPhilipp
Insert for "Ja, Herr und Meister!" (Rigor Mortis)
Here is a simple and practical insert I designed for the card game Rigor Mortis: Ja, Herr und Meister! (German version of Aye, Dark Overlord! ) This organizer is designed to fit perfectly into the original box, keeping your cards neatly…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
Divisore per ripiani del frigorifero / Refrigerator shelf divider
Va assemblato incollando un bullone e un dado da 5 mm It is assembled by gluing a 5mm bolt and nut
P
Printables
Grigori Efimovitch Raspoutine — Bust
Grigori Efimovitch Raspoutine — Buste 🇫🇷 Description Ce buste représente Grigori Efimovitch Raspoutine dans une interprétation sculpturale classique limitée à la tête et au haut du torse, reposant sur un socle sobre et équilibré. Les…