11 458 modeli
This is Version II of the Rocket Launcher , with a much more reliable trigger mechanism which should stop any lockup for most people, and general smoothness of the action. Massive thank you to AKinferno for helping me with all the test…
Wydruk około 2,32 €–2,83 € nettoWstępna wycena jednego wariantu
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
A rocket engine model created by our in-house designer Vlado Turek. It's printable completely without supports. If you own the Original Prusa MK4/MK3.9, you'll find pre-sliced version of this model on the USB stick. This model is also…
Wydruk około 9,08 €–11,10 € nettoWstępna wycena jednego wariantu
I first posted this on Thingiverse on 1/23/2022. A couple of copies were posted here as original work (without attribution) and were taken down, so I've decided to also post my original design here. Print using 0.4mm line width and no…
Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu
Design for bigger prints ( 1 meter tall rocket from a standard Prusa i3) : https://www.printables.com/model/467608-huge-moon-rocket A famous comics character's moon rocket. No need for screw, no extra part, no support, no gluing, self…
Wydruk około 9,31 €–11,38 € nettoWstępna wycena jednego wariantu
Another variation of our rocket engine sample model. It's printable completely without supports. Both single color and dual color variants are available.
Wydruk około 4,92 €–6,01 € nettoWstępna wycena jednego wariantu
This is small fun model of rocket engine that propels an inflatable balloon. It has 3 nozzles that are in a helix shape and thus help stabilize the nominal trajectory. Baloon can get quite high, but it is prone to wind. Although this is…
Wydruk około 0,32 €–0,40 € nettoWstępna wycena jednego wariantu
*** Assembly Videos At bottom of this page*** Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non printed parts list is below along with easy step by step assembly videos. Help is available, usually…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Size: 125mm x 90mm x 77mm WEAVED version: Filaments: PLA Vanila White (body), PLA Jet Black (eyes) and Filament PM PLA+ Pastel Bubblegum Pink (nose) CROCHET/KNITTED version: Filaments: Filament PM PLA+ Pastel Bubblegum Pink (body) and PLA…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
A variation of our rocket engine sample model with added side nozzles. It's printable completely without supports. If you own the Original Prusa MK4S, CORE One, or CORE One L printer, you'll find pre-sliced version of this model on the…
Wydruk około 12,76 €–15,60 € nettoWstępna wycena jednego wariantu
Printed at 0.3 mm layer height in about 4 hrs. designs to print with no infill and no supports. There are 2 holes under if you want to put an led light source to illuminate your gem crystals likewise you can paint the rock formation and…
Wydruk około 4,41 €–5,39 € nettoWstępna wycena jednego wariantu
Some months ago, my brother and his wife had their third baby. Obviously, as the coolest uncle ever, I had to give a spectacular gift to the little guy. So, I thought hard. Both parents are science fiction nerds. My initial idea was a…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
This is a reconstruction/remix from the original one that you can find on thingiverse here .
Wydruk około 1,38 €–1,68 € nettoWstępna wycena jednego wariantu
This model is ideologically based on the line Crochet tension ring Crochet Ring Crochet Ring (parameterized) New ideas have been incorporated into the model and the result feels significantly different. Printing recommendations:…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Just a simple crochet hook, can increase size within slicer if needed, 20 minutes , less than a metre of filament. 0.2 res No adhesion No support. 20% or above infil.
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Hier mein erster Versuch einer Spielzeugrakete. Empfehle die Raketenstützen mit Support zu unterlegen um den Halt zu gewährleisten. Layer High: 0.10 / 0.20mm Infill: Gyroid 10% Muss natürlich bei bedarf angepasst und Skaliert werden, das…
Wydruk około 4,92 €–6,02 € nettoWstępna wycena jednego wariantu
This ring is a full remake of the Crochet Ring originally uploaded by @Milan . After using the original for a short while, my wife asked for a few changes. Specifically, she requested (1) a taller guide rail at the base of the ring and…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
This Mini Grocery Bag Holder is a compact and practical shopping gadget designed to make carrying bags easier and more comfortable . Simply slide the bag handle into the groove , and enjoy a pain-free grip while carrying heavy groceries.…
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
Credit to original creator: https://www.thingiverse.com/thing:5148846 Printed at scale 150%, and added custom support for the chin.
Wydruk około 8,13 €–9,94 € nettoWstępna wycena jednego wariantu
Info: remixed Robin_Pe rude finger cap found out, that his version printed at 97% with 0.4mm nozzle works great for me (Prusa MK3S+) Not for presta valve ! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
🛒 IMPORTANT NOTE: Upon first use, the cart token slot may be slightly tight due to friction. To ensure smooth operation, insert and remove the token a few times, or use pliers to gently press it into place. After a few uses, it will fit…
Wydruk około 3,93 €–4,80 € nettoWstępna wycena jednego wariantu
This is version 2 of my Starship style model rocket. As I'm learning how to design rockets I decided to overhaul the original design. I was working on the two stage version of this rocket but decided to take a step back and rework the…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
Rock Remote Holder Keep your space tidy with this rock-style remote holder , a decorative organizer that blends perfectly into your home while keeping your essentials within reach. 🪨 Designed to look like a natural stone, this model hides…
Wydruk około 9,04 €–11,04 € nettoWstępna wycena jednego wariantu
This is a remix of RealAbsurdity's wonderful "Modular Snap-Fit Saturn V" rocket design from thingiverse, but I re-built it for printing on my Prusa MMU2S! The coloration is based on as many pictures of Apollo-era Saturn V as I could find,…
Wydruk około 17,40 €–21,27 € nettoWstępna wycena jednego wariantu
A play of light and shadow, kindling for whimsical fables. Open source version of https://cosmicjubilee.com/designs/twinkling-bloom/ - available to buy now! A tealight holder with delicate tendrils growing from its base, designed to cast…
Wydruk około 5,13 €–6,27 € nettoWstępna wycena jednego wariantu
A new parametric model inspired by the structure of big rock formations. Used Filament: This model was printed using Gunmetal Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to…
Wydruk około 2,64 €–3,23 € nettoWstępna wycena jednego wariantu
Rocktopus Keychain
Wydruk około 3,18 €–3,89 € nettoWstępna wycena jednego wariantu
Crochet Block board with 4.10mm hole designed for 4mm wooden dowels
Wydruk około 21,54 €–26,32 € nettoWstępna wycena jednego wariantu
Eyeballs for your Red-Eyed Crocodile Skink!
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 0-2% Perimeters 1 No Supports needed Scale it as you like :)
Wydruk około 3,29 €–4,02 € nettoWstępna wycena jednego wariantu
Updated the hole size and made the back feet more firm. Also named all components in the .3mf file to make things easier. This is the kind of toy I would fidget with when I was a kid. A little Transformers Micro-cassette. While it does…
Wydruk około 5,36 €–6,55 € nettoWstępna wycena jednego wariantu
The Kickstarter is up to 97 unique creatures and 6 unlocked Patreon bonus minis 😵 Final stretch...so exciting, so much more to unlock!…
Wydruk około 6,41 €–7,84 € nettoWstępna wycena jednego wariantu
Layer Height- 0.2mm Print Without Support PLA Infill Density- 15%
Wydruk około 1,94 €–2,38 € nettoWstępna wycena jednego wariantu
Decorative Croc valve stem cover. Includes both schrader and presta valve cap styles. After several test prints, found it came out best printing on it's side with some supports. Also remixed from the following:…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
Ever wanted to Rock your Crocs? No? Me neither. Well, now you can anyway.
Wydruk około 3,54 €–4,32 € nettoWstępna wycena jednego wariantu
I printed this at .15 layer height but .20 should work, add supports to the wings and the main body may require supports for coin slot. For a two colour body add colour change at 110mm in your slicer. Low Poly Version can be found here. 🤗…
Wydruk około 2,96 €–3,62 € nettoWstępna wycena jednego wariantu
I made the base of the ears stronger and enlarged them. I smoothed out the back of the nose and enlarged it. NOSE Infill 20% Supports: yes 0.2 quality PETG or PLA Filament EARS Infill 20% Supports: yes 0.2 quality PETG or PLA Filament
Wydruk około 1,15 €–1,40 € nettoWstępna wycena jednego wariantu
I continue my streak of classic comic inspired 3D statues / dioramas / sculptures (more are in the works, be sure to follow if you want to be notified). This time around I decided to create my personal interpretation of the classic red…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
A Cross Croc Charm for your Crocs. Please like and make.
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
This is a scent training vessel for dogs learning or competing in scent work / nose work. You can place the scented object inside (such as a cotton swab infused with essential oils). Printing tips: Print the rock and cap as oriented in…
Wydruk około 2,43 €–2,96 € nettoWstępna wycena jednego wariantu
Designed to print on an MK3 or MK4 printer without supports! Print 2 of these and they can be used individually for each foot or clipped together to form an ergonomic adjustable foot rest. The Foot Rocker Footrest helps to promote better…
Wydruk około 17,76 €–21,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The two parts of the jetpack must be glued. Requires adapter (included) between grip and hand.
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Holder for food plastic bags several at once. It prints really well. It is necessary to use supports! If you are interested in my work, the links are here:…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu
Jedná se o zjednodušenou napodobeninu spřáhla ROCO.
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
🇮🇪 Fáilte go hÉirinn! ☘ Welcome to Ireland! This model was created by Dany Sánchez . The Rock of Cashel (Irish: Carraig Phádraig ), also known as Cashel of the Kings and St. Patrick's Rock , is a historical site located at Cashel, County…
Wydruk około 2,89 €–3,54 € nettoWstępna wycena jednego wariantu
A small crib that was designed to hold KUMATY bears but can be scaled to needed size Organic supports work well if you don't support the begs of the bed, my setings are in the 3mf file.
Wydruk około 2,00 €–2,45 € nettoWstępna wycena jednego wariantu
This model was designed to be printable in Spiral vase mode. Print instructions Use spiral vase mode found under Print settings > Layers and Perimeters.
Wydruk około 3,89 €–4,76 € nettoWstępna wycena jednego wariantu
This project is a remix of the United Launch Alliance (ULA) upcoming Vulcan Centaur 561 rocket. The original rocket files can be found at…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
This is a 3d model of the Rocinante aka the MCRN Tachi from the SyFy and Amazon Prime show The Expanse. Print instructions I started with this excellent 3d render by Anton Perfilev…
Wydruk około 34,17 €–41,76 € nettoWstępna wycena jednego wariantu
The original front roll of the S5 is very hard, so driving on slabs (or rather over their gaps) can be very noisy. This flexible roll reduces this noise by taking most of the energy and not transferring it to the robots case. What you…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Easy to make a cute Crocodile keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Full Text: Rocket 2.0 Passthrough: Creativity in Full Thrust Introducing the new Rocket 2.0 Passthrough model, combining simplicity, functionality, and innovative passthrough design. This rocket opens up endless possibilities for vibrant…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
This is the model of the Terran-1 GLHF (Good Luck, Have Fun) rocket, which had a partially successful first launch a few days ago, March 23, 2023. Relativity Space has some info on their rockets at https://www.relativityspace.com/rockets…
Wydruk około 7,07 €–8,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
No reason at all. None. I picked the egg because it had a nice chin & nostrils for vase mode.
Wydruk około 2,38 €–2,91 € nettoWstępna wycena jednego wariantu
This Eppendorf (microcentrifuge) tube holder took inspiration from Stefan Huber's model ( https://www.printables.com/model/310767 ). I tried printing Stefan's model numerous times but the spring part of the rack was consistently failing…
Wydruk około 2,51 €–3,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Aardvark Crocodile Skull Chimes
Wydruk około 13,74 €–16,79 € nettoWstępna wycena jednego wariantu
Easy model. Print every size of hook from this set with different color of filament. This model is suited for print in place, no brim or supports. Print with PLA, smooth it with fine sandpaper. (Or you can print it with materials for…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
This model was tested with Estes C6-5 and A8-3 engines, both worked well. This model is entirely 3D printed and support free, however, a brim is highly recommended. Unfortunately, it is too tall to fit on the Prusa MINI. Watch the test…
Wydruk około 4,62 €–5,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Deteriorated Bone Material or a Pile of River Rocks. Figured this could be used in a Gamefold or the ilk.
Wydruk około 3,20 €–3,91 € nettoWstępna wycena jednego wariantu
Printed without any supports and at 0.3mm layer height -draft.
Wydruk około 5,89 €–7,19 € nettoWstępna wycena jednego wariantu
needed a glove holder. liked these clips so made a change to mount to wall
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed without supports Glued together
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
21 Feb 2024 Added a revised version 0.2.
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Thanks to PitterPatterPete for the great idea to give the Red-Eyed Crocodile Skink eyes! I only added pupil to the eyeballs and printed them with the MMU. Of course, this also works without MMU. If you want to print the gcode directly,…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
Here we have a customisable proclamation display, as seen in the Harry Potter series these can be mounted on the wall via nail and chain, or command strip. They can also be used as Xmas tree decorations the key part, is they are…
Wydruk około 2,20 €–2,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's remix of Cherry MX Keycap and The Rock's Head . Not being by my 3D printer for some longer time now, so I decided to put this just as .STL without trying to print it (unfortunaly). Use of raft is recommended. Print should be fine by…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Coin with a cartoon rocket engraved in it. Uses art from PublicDomainVectors.org . LogRocket uses a similar purple and white version of this vector. The source vector was uploaded to PublicDomainVectors on 2017-02-06, and LogRocket was…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
After the successful minigun , we are proud to offer another piece of equipment that every responsible home owner should have. This rifle is comparatively light, easy to maintain, and will look good sticking out of your car's glovebox.…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
I designed this box to hold my wife's crochet hook set. It is meant to fit the Eleggant Hooks set. It holds the somewhat bulky egg shaped handle, the hooks, and the little box of O-rings. I also added a place to hold her notes. (My wife…
Wydruk około 9,37 €–11,45 € nettoWstępna wycena jednego wariantu
Suite à la discussion sur la butée anti-bascule , voici une pièce pour raccorder le guide parallèle et d'une scie circulaire Festool TS55 EBQ et le rail FS de la marque. Il est possible de n'utiliser qu'une seule pièce pour éviter la…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Un clip et deux versions de crochets pour suspendre des balais, des pelles, … bref du rangement / one clip and two versions of hooks for hanging brooms, shovels, ... more and more storage
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
My wife crochets and knits. She has a lot of needles and hooks. When I first started 3D printing, I wanted things to design and make. So, I designed this about 4 years ago as my first box project. It uses filament for a hinge - which has…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Funnel for Roborock S7
Wydruk około 1,04 €–1,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed some attachments to my T Track and none of the models available matched my Rocker T-track. I modeled the track and an insert that slides inside. I chamfered the bottom edges of the insert to print with no supports. You can print…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired model from new launch of Prusa CORE ONE which I really liked but was nowhere to download. STEP model was showing some errors, please use the .STL or .3mf file. Step file included for those interested in CFD analysis and so on.…
Wydruk około 21,28 €–26,01 € nettoWstępna wycena jednego wariantu
Easy model. Print every size of hook from this set with different color of filament. This model is suited for print in place, no brim or supports. Print with PLA, smooth it with fine sandpaper. (Or you can print it with materials for…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
The image compares the size to a track pad. As you can see, it is quite small. Supports are required. The stem might break off while removing supports, so be careful. If it does break, you can use a 3D pen to weld to the model.
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
Easy model. Print every size of hook from this set with different color of filament. This model is suited for print in place, no brim or supports. Print with PLA, smooth it with fine sandpaper. (Or you can print it with materials for…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
Simple remix od this model by mijo11 made by my girlfriends request. Just modified one end to make it really pointy so it can be easier applied. Print with high infill or many perimeters, just to fill it as much as possible to make it…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Imagine a million years lost in space and time, after crashing through a vortex of loose change it has transformed my original creation into a stealth low poly rocket bank. Be warned it's a bit battle scarred and dented but still holds…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
A friend of mine has a particularly picky cat that needed a raised bowl without sharp corners that “trap” food. I know what you're thinking, “classic cat”, am I right? Anyway, I am always happy to help. There was already a design on…
Wydruk około 5,62 €–6,87 € nettoWstępna wycena jednego wariantu
The Procrastinator 3000 is the simplest of mouse jiggler devices. Watch how it works: https://i.imgur.com/9lpT7iE.mp4 Features: Low cost and low energy consumption Usage is undetectable by any software Failproof design Very easy to print…
Wydruk około 7,34 €–8,98 € nettoWstępna wycena jednego wariantu
A pocket/holder to mount in the door of an Opel Rocks-E (or probably Citroen Ami) that can hold a small first aid kit (e.g. the one required by German law). As it is, the holder fits in the rear corner of the right side door (or the front…
Wydruk około 12,56 €–15,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Rafts: No Supports: No Resolution: 0,2 Infill: 100
Wydruk około 2,01 €–2,45 € nettoWstępna wycena jednego wariantu
Easy model. Print every size of hook from this set with different color of filament. This model is suited for print in place, no brim or supports. Print with PLA, smooth it with fine sandpaper. (Or you can print it with materials for…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
This stand is designed to accommodate 44 1.5 ml and 30 0.5 ml Eppendorf-type microcentrifuge tubes. Multiple stands can also be stacked on top of each other, making them ideal for storing a large number of samples. The stand was designed…
Wydruk około 8,89 €–10,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Luftfeuchte + Temperatur Sunlu JAYO Trockner S1 + Silica Ich habe mir eine Temperatur und Luftfeuchteanzeige für den Sunlu /JAYO Dryer S1 erstellt (Inspiriert durch andere Thingiverse Konstruktionen) Benötigt wird eine M6 Mutter + M6…
Wydruk około 2,81 €–3,44 € nettoWstępna wycena jednego wariantu
One time use, e.g., you can put it together but you can't take it apart again, if you try and take it apart then it will brake.
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Rocket Passthrough: Endless Fun in Every Print Discover our new passthrough model—a small rocket that blends simplicity with addictive play and opens up endless possibilities for creative expression! This design invites you to explore…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
Der Sunlu S1 ist nur für die 1kg Standard-Spulen vorgesehen. Um auch die kleinen 250g Spulen verwenden zu können, entwarf ich diesen Adapter. Nachdem die Spule auf den Adapter gebracht wurde, wird dieser nur zusammengesteckt und in die…
Wydruk około 8,77 €–10,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Low poly crocodile
Wydruk około 2,14 €–2,62 € nettoWstępna wycena jednego wariantu
This spring is tapered so that it can compress down into a thin slice. That will preserve more internal air volume for your successful desktop whomp LEO insertions. It prints fast and decent without supports. It has been whomp-tested 3…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Crocodile features a low, elongated pose with a clearly defined silhouette and an open internal structure integrated into the body. With an overall length of 140 mm, it works well as a modern decorative accent for shelves, desks, or…
Wydruk około 2,18 €–2,67 € nettoWstępna wycena jednego wariantu
Platinum I, II, & III rank emblems from Rocket League. Copyright of course goes to Psyonix.
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
Designed this good luck pig as a present for my family and some friends just in time for new year's eve. I printed this in grey PLA and painted it with acrylic paint. I made a 9mm hole for some gift ribbon and labels with PrusaSlicer. The…
Wydruk około 2,06 €–2,51 € nettoWstępna wycena jednego wariantu
Easy model. Print every size of hook from this set with different color of filament. This model is suited for print in place, no brim or supports. Print with PLA, smooth it with fine sandpaper. (Or you can print it with materials for…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Project A comfortable compact grip for carrying reusable (or one-use) grocery bags. Grip easily fits in pockets or can reside on one handle while the other slips in and out of the grip when needed. Printing Prints vertical on either end…
Wydruk około 1,89 €–2,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
In a mountainous region in the heart of Ethiopia, some 645 km from Addis Ababa, eleven medieval monolithic churches were carved out of rock. Their building is attributed to King Lalibela who set out to construct in the 12th century a ‘New…
Wydruk około 3,16 €–3,86 € nettoWstępna wycena jednego wariantu
Rocky's badge from the TV-series "Paw Patrol". Model files include a multi-material version as well as single color version. Remix of: https://www.thingiverse.com/thing:2372550
Wydruk około 1,24 €–1,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ich vbrauchte für unseren Opel Rocks E einen Innenspiegel. Diesen habe ich bei Amazon gefunden. Der originale Halter des Spiegels sagte mir nicht so zu, da man ihn hätte Schrauben oder Kleben müssen. Also einen neuen konstruiert. Infill:…
Wydruk około 0,79 €–0,96 € nettoWstępna wycena jednego wariantu
