Liczymy pasujące modele…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
P90 and FS2000 parts Printing: All parts should be printed solid. PLA will not work for anything other than the selector switch. Nylon is the recommended material. You need to use a strong impact resistant material. Stay away from carbon…
The original viewfinder has the same clamping mechanism. I added a bevel on both sides to make it fit because the width of the viewfinder is a little sunken into the body. Printed with layer height of 0.15 (first layer 0.2) using tree…
Simple silhouette of a Honda S2000
1:28 Honda s2000; Mini-Z compatible I have remixed and put together this rc kit for the Honda s2000, along with an assembly video. Hopefully this will translate to an enjoyable print and assembly experience. Hardware Recommendations The…
M2000 Marker from escape from tarkov
Honda S2000, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
REV 01: Original model. REV 02: Filter fit improved, deeper socket.
Got tired of having coins and everything fall into where the already bad cupholder is in my S2000 so made this little organizer.
This is a mount that attaches to the Modifry S2000 mount Features - Slim mount, only 8mm thick - Easier line of sight by raising iPhone up 2.5 inches from center of mount - Phone can oriented in portrait or landscape - Fits MagSafe…
This is a bracket to hold your CTEK or NOCO branded quick connector. This bracket makes it easy and convenient to connect and disconnect your battery tender. I also print these from my Etsy store and also have some S2000 specific brackets…
This is a pocket to replace the factory single DIN radio and should work on all model years (tested on a 2007). There's two versions, long and short but both will work with the factory radio brackets to mount. Try to use a M5 screw that's…
LEGO Honda S2000 Naruto
Replacement for the DS2000 motor mount. This is a work in progress. My main PCB is dead, so I'm using an arduino which takes inputs from a thumbstick controller I made. It's not shown in this pic, but I recommend wrapping a thick elastic…
I picked up an old but mostly functional Meade DS-2102MAK telescope with Goto mount for my kid. The batteries had been left in it for years so I had to open up the mount in any way to clean it up and I discovered the worm gear on the base…
Please post a pic if you make this! Note: I am working to create a thinner version of this. Needed bird spikes for the rain gauge on my Ambient Weather WS-2000 station however didn't purchase them. Built this ring that snaps into place.…
I jsut resized a file I found for a mini z body fits great on my 1/28 scale drift dpa2 rc car
Back with another pretty simple prop. Printing this should be very straightforward. Assembly is just as easy but depending on your printer you might want to scale down the lower part by just a percent or two. In my case it perfectly fit.…
54107-S2A-003 SUPPORT B, SOUFFLET CHANGEMENT DE VITESSE Pour honda s2000, crée à partir du modèle original idéal en ABS
Replacement stock style Parking Brake Release for Honda S2000. (E-Brake Button) May fit other hondas. Recommend tapping with M5x.8 Print Settings Printer Brand: LulzBot Printer: Mini Rafts: No Supports: No Resolution: .2 Infill: 12%…
This is a 3D-printable tool to loosen and tighten the OEM oil cap on a Honda S2000. The part number this works with is 15610-PCX-A01. It's easy to overtighten the oil cap and crack it in the valve cover. Do not crank on it with this tool!…
Honda S2000 Gentex Mirror Mounting Adapter Adapter for using the mirror stalk from a stock mirror on a Gentex homelink / backup mirror. Assembly: Original stalk must be removed from the stock mirror - only way I could get it out was to…
74221-S2A-003 ABRI DE CLIMATISEUR D'AIR pour honda s2000 crée à partir du modèle original idéal en ABS
Needed a Pylontech US2000 holder to....hold...my Pylontech Battery
https://www.buymeacoffee.com/jhc89 Printed button side up with snug supports touching build plate only and carefully removed with flush cutters and fine scissors. I started by copying the dimensions from my old and tattered factory rubber…
Support de batterie d'origine pour Honda s2000. Crée à partir du modèle d'origine Idéal en ABS ref 31521-SR3-0000
USE AT OWN RISK!!!! Blade protector for parkside sliding miter saw. May also fit other cheap brand 210 mm saws. Let me know how it works out for you. The stl model is modified a bit from the one depicted in the photos. I disclaim any…
UPDATE COMIGN SOON!!!!! FOR TONES AND ROTATOR BE AWARE This is my 3D‑printable version of the Whelen WS‑2000R , built to rotate and sound as close to the real thing as you can get with hobby‑grade parts. I modeled the housing, rotator,…
Keep in mind that I used a really transparent ugly yellow filament so the model will probably look a little different if you have a proper yellow filament:) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm…
1x2 Gridfinity box designed to hold a Kingston XS2000+its original TPU case, should also be compatible with the XS1000
If you found my things useful, you can buy me a cup of coffee: paypal.me/FirmaOnbenul Houder om het Klik Aan Klik Uit ICS2000 Basis-station aan de voedingsadapter op te hangen Holder for hanging the Click On Click Off ICS2000 Base station…
Use this as your license plate at shows or car meets. CNC it, or print it with PLA/PETG/ABS filament and wrap it for some color. Check out some of my other S000 products at my Etsy store .
You do not need CFS or AMS for this print or any of my other prints. Add a pause on the correct level and change the filament. Then continue on. You can resize but not the height. Design Concept The artwork features a stylized…
Honda S2000 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Supports for Meade telescope tripod DS2000 and other models. The OEM part had flimsy holes where it mounts to the legs with rivets. I made this more sturdy so it wont break. Take out original rivets with drill or pliers and replace with…
Orange Pi 3 LTS case with SSD Kingston XS2000
If you find my designs useful, please consider sending a tip . Update Nov 2025: Added a 2nd version which has recesses for adding an o-ring - Images online seem to show early versions of the mount used an o-ring, later ones like mine…
Printed on a CR-6 SE using generic PLA. Print with Support touching buildplate
You need to clear the shaft hole, there variation in the size for exactly the same bogey model so take the time to check the size of your bogey shaft first
A wall mounted display for the LEGO Speed Champions 2 Fast 2 Furious Honda S2000. There is a “FULL MODEL” that should be printed at a .2mm layer height. See screen shots for which layers to change colors at. Also supplied is each color…
Halo MA5C assault rifle body kit for the F2000 and FS2000 airsoft AEGs. Parts: Grip, Muzzle (14mm CCW thread), Top Rail 01-08 (numbered front to back - these are the parts that go on the rail). Hardware: M3 screws to lock the parts down /…
Wanted an oil pressure guage for the car
Halo MA40 assault rifle body kit for the F2000 and FS2000 airsoft AEGs. Parts: Flash Hider (Pt1, Pt2), Hand Rest (A, B), Top Rail (6 different segments, numbered in order). Hardware: M3 screws to lock the parts down / pin them to the…
Bonsenkitchen VS2000 Vacuum Sealer came with a cardboard spacer to store the sealer safe. I create a replacement for that cardboard piece.
USE SUPPORTS WHEN PRINTING!!! what is included one array with 3 horns how to assemble if you want more than one array, print some more until you're content. use superglue and glue the flat part on the back to any surface. you can use a…
Hi, I designed a custom bracket to hold the Continental flexfuel ethanol sensor I added to my '02 RHD HONDA S2000 AP1 . No additional hardware needed. The bracket mounts on the side of the flywheel case (junction of engine and gearbox),…
wheel should slide emplace and doors are held together be pins
Gridfinity holder for up to two Kingston XS2000 (1x1)
Print Orientation upside down. No Supports needed.
I think the Anker SOLIX S2000 is the best UPS you can get, so I figured I'd mount it under my desk. I have another one mounted under my server rack. The file is V4, the compact full-plate version with a 10 mm lip.
I made this for my PDU to hold the power supply and CD reader/CD's and board. This is what I used in this: Power supply Meanwell RD-50A (5VDC/12VDC)…
I bought this telescope at a thrift store like most people today have found them. I ran into a lot of issues with trying to print this worm gear. The IPT file does not work with mostslicers or even normal Fusion 360. so i went down a…
Designed for Thrustmaster contest. Honda S2000 Dimesions, designed to feel just like the S2000's shift knob. Fits on TH8S THrustmaster shifter for sim racing.
If you find my designs useful, please consider sending a tip Update Nov 2025: Added a 2nd version which has recesses for adding an o-ring - Images online seem to show early versions of the mount used an o-ring, later ones like mine didn't…
Replacement rollers for the Philips S2000 series vacuum cleaner
UPDATE COMIGN SOON!!!!! FOR TONES AND ROTATOR BE AWARE This is my 3D‑printable version of the Whelen WS‑2000R , built to rotate and sound as close to the real thing as you can get with hobby‑grade parts. I modeled the housing, rotator,…
UPDATE COMIGN SOON!!!!! FOR TONES AND ROTATOR BE AWARE This is my 3D‑printable version of the Whelen WS‑2000R , built to rotate and sound as close to the real thing as you can get with hobby‑grade parts. I modeled the housing, rotator,…
