140 modeli
Das niedersächsische Wappen - durch Konvertierung des originalen, zweidimensionalen Wappens und minimale Vereinfachung (Schattenschraffur des Pferdes) erstellt. Als einfaches Wappen oder als Schlüsselanhänger. The Coat of Arms for Lower…
Over the summer while visiting relatives in Massachusetts, I attempted to use my revopoint miraco to scan as much of the dinosaur footprints as possible in holyoke. The Revopoint Miraco uses projected infrared light to track it's position…
Tidy up your kitchen drawers with this compact organizer for baking sachets like vanilla sugar , baking powder , and other small pouches. 🧱 The insert features 8 compartments : • 5 standard-depth slots • 3 deeper slots for storing more…
🧁 Baking Sachet Organizer – 3D Printed Kitchen Storage Keep your baking essentials neatly organized and within reach with this 3D-printed Baking Sachet Organizer. Designed to hold packets of baking powder, vanilla sugar, yeast, and other…
Keep your kitchen tidy with this remixed, larger organizer – perfect for cooking mix packets like Knorr Fix , Maggi Fix , and other seasoning or sauce sachets. 🍝🌿 🧱 The insert features 8 compartments: • 5 standard-depth slots • 3 deeper…
An improved version of the popular kitchen packet organizer by w00h . This redesign has some advantages: Available in multiple sizes ranging from 1x2 to 2x5 compartments Prints about 45% faster for the same storage capacity Uses about 35%…
USS Massachusetts, launched September 23, 1941, is a South Dakota class battleship. Massachusetts took part in Operation Torch and destroyed the incomplete Jean Bart. She also fired the first and last 16-inch shells of WW2. Print Settings…
A model of the german Sachsen class frigates. I remember doing this one quite well because I started the modelling process after a silvester party at new year 2020 while I was listening to the voice of a drunken friend over teamspeak xD…
This is my interpretation of the typical German Klappdeckelwagen K 06 “Wuppertal” or ”Sachsen" in Gauge 1 (1:32). This is the simplest version, without brakes. A version with brakes and a “brakemen's shelter” will probably follow soon.…
After finalizing the simplest version, without brakes ( https://www.printables.com/model/423881-deutsche-reichsbahn-deutsche-bundesbahn-k06-klappd ), it took little effort to create this version with a “brakemen's shelter”. All items that…
Massachusetts, USA (MA) Topographic Relief Map with Rivers and Coastal Waters Massachusetts, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…
Need a better way to organize your baking sachets? This slim, diagonally arranged organizer is designed to store small packets like vanilla sugar, baking powder, cream stiffener, and flavorings in a clear and space-saving way. With a…
++++ UPDATE ++++ meine Modelle sind nun hauptsächlich auf Makerworld zu finden. Dort halte ich die Daten auch gepflegt und es gibt fertige Druckprofile für alle Bambu-Drucker. ebenfalls sind dort weitere Varianten zu finden. →…
BOM: Printed with ROSA3D Starter PLA Red Stop wasting expensive wet pet food or thick sauces! This oversized pouch squeezer is designed specifically to handle large, wide sachets that standard toothpaste squeezers simply cannot fit. With…
3D DRUCK SACHEN - FILAMENT SPOOL CLIP Für alle gängigen Filament Spulen von HG hergestellt - Viel Spass mit unserer Version. Bei Fragen einfach einen Kommentar schreiben Dieses Produkt darf nur für den persönlichen Gebrauch gedruckt und…
Die Teile habe ich selbst nach konstruiert. Im Netz sind mehrere Varianten zu finden. Bis jetzt habe ich leider noch keinen zufriedenen Ergebnis beim Drucken erzielt. Halten nicht lange durch. Schreibt bitte in Kommentaren mit welchen…
Stapelbarer Backtüten-Kasten – Version 1 Mein erster Versuch, und ich bin echt zufrieden damit! Das Modell ist voll parametrisch in Fusion erstellt – egal ob quer oder längs, einfach die gewünschten Innenmaße einstellen, slicen, drucken,…
The " Energy Gel Squeezer " from 66point99 works also fine with a cat food sachet. But cat food sachets are little bit wider then energy gels. So I just enhanced the length. Nothing more. All the credit still goes to 66point99 .
English below Es gibt zwar schon ein paar Box für Tee, aber an allen hatte ich irgendwas auszusetzen, also musste ich selbst eine erstellen. Eine Box um die Teebeutelsäckchen hübsch aufzubewahren. Zum Hinstellen oder zum Ankleben mit…
If you need more width, simply scale the organizer and the dividers. The version with dividers is not intended to be scaled in length. The version without dividers is fully scalable. 11.04.2026: Added a version with thicker 3 mm walls to…
Just a 4 section organizer for some food sachets/spices we use.
Don't print and sell on Ebay (or equal). Only for private use: for Sachs 301 Type 299-499 level the connetion plate from carburetor by grinding Renew all seals. Use material with a high heat resitance. M3 oval head screw and self-locking…
BOM: Printed with ROSA3D High Speed PLA Light Gray Tired of rummaging through messy drawers or boxes to find the right spice packet? This simple, highly effective organizer keeps all your kitchen sachets perfectly sorted and visible. It…
SACHS 503 moped filter made better. I've created this piece because my original piece was broken, so I had to replace it. An original part costs around 50 Euros, so I had to create a better and 3D printable version. I suggest to print the…
These are the files used for my Geodesic Dome ISRU project. This workshop was led by Tom Sachs and the MIT Architecture department. Please see the following video for context: https://www.youtube.com/watch?v=iD66RMtS0Sk&feature=youtu.be…
A neat and tidy way to store all my takeaway ketchup sachets for use later
A minimalist Knorr salad dressing sachet holder capable of holding up to 10 sachets. Can be printed very fast and doesn't need support.
ENGLISH : I created a food sachet dispenser for my cat, allowing to put more than 18 bags, with a place to hold an open sachet. FRANCAIS : j'ai créé un distributeur de sachet de nourriture pour mon chat, permettant de mettre plus de 18…
Immerse yourself in the thrilling world of MotoGP with my exclusive Wall Art that represents the circuits of the 2024 MotoGP season. This collection features detailed representations of the most iconic circuits from the MotoGP calendar,…
Designed this thing for those sauce sachets that came with food deliveries Print instructions Category: Kitchen & Dining Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution: 0.3 Infill: 20% Filament:…
This is a high-resolution 3D scan of the ceramic bead included with the Tom Sachs Nikecraft GPS 'Bricolage' . I didn't want to lose or break the original, so now I've got an endless supply of replicas! 3D models: ISRU_Bead.stl - Original…
A single-piece Airbox / Airfilter for the Sachs 503 Moped or all other Carburators which use a 20mm connection. You need to pause the 3D Print in the right moment so you can place the actual filter. This can easily be done in the Prusa…
This whistle includes the phone number for the LUCE hotline ( https://www.lucemass.org/ ), which is used in Massachusetts, USA. The text is raised on the model, so you can print with a color change for better visibility of the phone…
For pouch food for dogs nad cats. Holle size 1,5x120mm. Filament need cca 7,5m (0,2mm, 2 wall loops, 15% infill).
I really hate trying to get coffee sachets out of a box (yes yes, I know this is not a real problem) every morning. So, I made this dispenser to take care of the problem. Super simple to use - just drop in sachets horizontally and they'll…
Box for sachets with e.g. paking powder, vanilla sugar etc. It has 6 compartments, all are 66mm wide - this should fit all common sachet sizes from German supermarkets. 4 compartments are 20mm long, 2 are 40mm long. If you want to print…
Plastic bushing for Sachs/SRAM S7 bicycle hub gear shifter. This is that red plastic part that sits on the shaft, between it and the shifter. It holds the shift tube in the correct orientation for the teeth inside the shifter to engage…
Designed and built (electronics pending) a custom 30cm per axis build volume corexy printer from scratch
This is a remix of Matthew Petroff's Tea Bag Holder ( https://mpetroff.net/2019/02/3d-printed-tea-bag-holder/ ) that was posted on his blog. I've changed the size to fit Sneak's sachet sizes. This allows you to store them safely but most…
Another School logo, this time it's for Massachusetts Institute of Technology or MIT. Two STLs, the base and the shapes for the logo itself. The shapes for the MIT are chamfered on the bottom so glue will be needed to fix them…
A silhouette of the german racetrack Sachsenring
Irgendwo im Netz habe ich die Idee eines Resonanz-Lufi gesehen und ich wollte wissen was es so bringt… … nun, du kannst deinen Vergaser mal ohne Lufi abstimmen und mit dem Reso-Teil wirst du ca. 1-2 Nummern kleiner fahren und wirst ca.…
Don't print and sell on Ebay (or equal). Only for private use: for Sachs 301 Type 099-199 level the connetion plate from carburetor by grinding Renew all seals. Use material with a high heat resitance. M3 oval head screw and self-locking…
A compact organizer for small packets and sachets.
Sachsenring circuit 3D printed Gpx File
Designed to hold Tiny Tasters food sachets (holds up to 16 sachets) It can be scaled in the slicer to dispense similarly shaped items. 90mm width, 130mm depth, 203mm height
Dispenser for sachete 100g on foods cats and dgos
Description This 3D-printable rotating modular rack is specifically designed for organizing plastic or paper spice sachets, envelopes, and seasoning packets. It provides a clean, space-saving vertical storage solution that keeps your…
JPG Design3D Habe hier die rechte Motorhälfte von einem leicht beschädigten Sachs 50S Motor eingescannt. Die Rippen und die Stellen die Schatten werfen sind leider nicht so gut geworden.
Silica container for my filament dry box. Check it out here https://samhillier.xyz/filament-drybox-cheap-and-fast/ Print settings: 2hrs on Prusa Mini 0.25mm layer height 2 perimeters 2 shells detect thin walls
This is a replacement for a Sachs Spectro S7 cover. I used this linked document as a design base. 3D-Model
Designed in Fusion360 to hold Nescafe Latte Sachets, something a bit nicer looking than the card box they come in, rubber feet on the bottom to prevent slipping. Each section can currently hold 3 sachets, but I will be tweaking this so…
This is a trophy-style decorative sign featuring the Japanese kanji 幸 , which represents Happiness . Below the symbol, the Japanese reading “sachi” is displayed, giving the piece both cultural meaning and visual balance. The design is…
A simple stamp with the word “Sacher” on the bottom, mirrored. Print with the highest possible resolution.
Clickbox cover for older Sachs Super 7 bicycle gearboxes. Category: Sport & Outdoors
Airbox for Sachs 503 and similar Mopeds Add a slice of kitchen sponge to the marked places. The one perpendicular to the Airflow is the filter. The sponges on the side walls act as pressure wave / noise dampener. It works quite well. Use…
Keep all your small baking packets neatly organized! This 3D-printable storage box is designed to hold standard small sachets such as baking powder , yeast , vanilla sugar , thickening agents , and similar packets that tend to get lost in…
Choke für Sachs Motoren 504 & 505, Passend für Mofas mit eckigem Luftfiltergehäusen aus Kunststoff für Hercules Mofas der M Reihe (M1, M2, M3, M4) sowie der Prima Reihe. Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 100…
A basic, labelled box which is intended to be used to hold coffee sachets. The .scad file is parameterised, so it can be printed to fit any size sachet and the text on the sides can be changed. The text is centered horizontally and…
3D DRUCK SACHEN - PTFE VERBINDER 4MM Schlauchverbinder von HG hergestellt - Viel Spass mit unserer Version. Bei Fragen einfach einen Kommentar schreiben Dieses Produkt darf nur für den persönlichen Gebrauch gedruckt und nicht verkauft…
Covers for both side of Sachs motor
a replacement throttle slide for a spartamet motorized bycicle with a sachs engine, slight amount of sanding is required
I recommend use the option: "Support for printable overhangs" for printing without supports.
Designed for quick print and minimal use of material. Wall thickness is just 0.8mm. The make on the photo is printed using a 0.8mm nozzle at just 25mm/s in about an hour. Ideal as a standing holder for sachets. But can also be wall mounted.
Cat sachet dispenser, it will help you to put all the food available in the sachet
I made a fan cover for the Anet A8 with the logo of the best car manufacturer in the world. So who wants to make his A8 an Ossi needs this fan cover. Category: 3D Printer Parts
Schablone für die eigene Herstellung der Dichtung des Kupplungsdeckels am Sachs 505. Der Motor war in vielen beliebten Mofas und Mokicks von Hercules, KTM etc. verbaut. Einfach auf Dichtungspapier auflegen, abzeichnen und ausschneiden.
I have created these organizers to sort a bit more the cabinet we have above the automatic litter box. The furniture we have is supposed to be one you purchase to install over the washing machine but it is repurposed. The sizes are to fit…
Vor kurzem kam im TV eine Sendung über Einbruch und häufige Verstecke für Wertsachen. Da kam mir die Idee, warum nicht eine alte Filamentspule als Versteck zwischen anderen Spulen nutzen.... Die originale Spule wird mit einer Säge in zwei…
My sachs madass air filter box broke so I moddelled this, it works for me, I made the intake hole 25mm insted of 20mm, I also removed the hole for the air hose and made a hole in the bottom (wich is hidden) to remove any water or moist.…
Deutsch: Das Modell ist ein Wandhalter für schwere Sachen, wie auf den Bildern zu sehen ist, hängt eine Kettensäge ohne Probleme und zusätzliche Stütze oder Halterung an der Wand. Befestig wird die Deckenhalterung mithilfe von 2…
Sachet kitchen organizer v1 Heights total : 60 mm side compartments: 30 mm dividers: 25 mm Top edges are rounded Sachet kitchen organizer v2 Heights total : 60 mm side compartments: 30-30-45 mm, 40 mm dividers: 25 mm Top edges are flat
We are always buying flavour sachets (pack of 1000) from ebay to use with our soda stream. Storage of these were challenging. I remixed Ketchup, Mayonnaise, Mustard sauces large sachet dispenser by Tocache to fit sachets size 12.2x5.2 cm…
Ich habe einen Ständer für Das Modell von der Sachsen-Klasse (Klasse 124) von "Das Werk/Takom" erstellt, da mir die Lösung des Herstellers nicht zusagte. Die Sockel sind mit Namesschild zu versehen, oder blank, je nach Wunsch. Die…
3D DRUCK SACHEN - KABEL KLEMME 7,5MM Für Kabel bis max 7,5mm Durchmesser von HG hergestellt - Viel Spass mit unserer Version. Bei Fragen einfach einen Kommentar schreiben Dieses Produkt darf nur für den persönlichen Gebrauch gedruckt und…
Based on a cylinder seeling I drew up a spacer for in between the cylinder and the motor-housing. It's available in different heights. The idea is to use this to figure out which exact spacing you need, then you can order the one you need…
Panneau lumineux, Sacha, avec une bande LED acheté ici,…
I was looking for a desiccant box for filament spools and liked @truglodite ‘s hexagonal container, but didn’t want to glue the lid on. After printing my remix, I decided to use it as a sachet box in my sock drawer! There are multiple…
2 models for 10 and 15 pods sachets. Etage - Stage file let you make your own combination, number, bye multiples joins. Haut - Top file make easier your own labels. All dimensions calculated for 0,4mm nozzle and 0,2mm layer height and no…
Distributeur de sachets de pâtisserie au format unique (levure etc). Bacs emboîtables en hauteur et fermoir du couvercle par glissière.
University of Massachusetts key chain
Die Borungen sind etwas knapp bemesser und müssen etwas (0,5mm) aufgebohrt werden
The map was perfect except for Massachusetts as it was not scaled correctly. I could not get the instructions on how to scale it to work so I just fiddled with the scale percentages until it fit with the rest of the puzzle. Enjoy!…
Simple holder for Cooking Sachets so they don't fall over and make a mess. Holds around a dozen Sachets
I scanned my house using PolyCam and 3D printed it.
hacken sehr stabil gut in pla
Use cases : This is my creation of a key ring of a Germany Circuit - Sachsenring. Impression : PLA or PETG Please give this design a like if you like it, or post a photo of your making! Good impression! Cas d'utilisation : Il s'agit de ma…
Boite pour Sachets déshydratants Imprimé en PLA ,0.2 mm de couche et remplissage de 15 %.
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Holder for the German Fragrance Sachets called…
My son broke the head of the Eierschalensollbruchstellenverursacher and because of that, the metal ball used to crack the egg fell of. I am not very experienced with 3D modeling, so please be patient with me. This is just quick and dirty…
N ew 250th Anniversary Massachusetts specialty plate , featuring five customizable parametric text slots . To personalize your plate, navigate to “MODIFY” → “Change Parameters” and enter one letter per text slot . Please note that while…
For Massachusetts: Think You SEE I.C.E. in your area? CALL LUCE HOTLINE: 617-370-5023
You should scale the model around 50% for one sachet or use the original scale for multiple ones. Additional photos, Voronoi pattern and sources you can find here (rus).
This is a spacer for the flywheel cover on a Sachs 50/2 moped engine for thoes who wants to run a Kokusan ignition system. Print in high-temp material. images show printed in Prusament PA11CF
I remix the Endstop Cover for the CR6-SE with the Logo of the company Sachsenring that build the iconic Trabant in east germany. Category: 3D Printer Parts
replacement for a small but important part. printed sidewards with support in PETG.
First layer height 0.2 layer height 0.16 Infill 10% No supports
to squeeze sachets of single-dose medicines such as anti-reflux or migraine
Dog Food Sachet holder for 90mm by 140mm sachets CFPETG 237'c 80'c 45mm .5 noz .3 layer 10% infill Gyroid 22.5 hrs print its on the to print list this week, so yet to print but its a box! Category: Pets
![Japanese symbol for Happiness sign (Sachi) [Remix]](https://media.printables.com/media/prints/572a75fc-1d09-4e74-88bb-a696f7ed1a65/images/11492676_c0d67650-ca69-41f0-a9e3-634ce04d5385_61793e1c-495f-44aa-a76f-58617d0e3ef8/japones-sachi-2.jpeg)
