GALATASARAY
Cok güzel bir logo.😁
- Pobrania
- 511
- Polubienia
- 14
- Ocena
- 0
160 modeli
Elite Saracen Spearman. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The mounted spearman…
Guitar pick with “Ukonvasara” symbol - it is a hammer for Finnish god of thunder, Ukko 🤘 Can be printed with: PLA 100% infill No support
An archer from a desert land. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The other…
This is a model of Final Fantasy 7 Yuffie Kisaragi in simple polygon form. I printed this model at 15% scale. Her ribbons on the back of her head are too thin to be printed so there is a separate model for those. The Ribbons are already…
A warrior from the Middle East. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The other…
A middle-eastern spearman from the Scorpio clan. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases.…
Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%. Filamento BASICO de Control 3D en varios colores (Español). Espesores de las capas amarillo 2mm, negro 1mm y blanco 0.8mm Kingroon KP3S Printed with 0.4 nozzle, layers…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Saraswati (IAST: Sarasvatī) is the Hindu goddess of knowledge, music, art, speech, wisdom, and learning. She is generally shown to have four arms. The four hands hold items with symbolic meaning. The book she holds symbolizes the Vedas…
This is a 3d logo of Tukish Football Team "Galatasaray"
lakshmi Ganesh Saraswati wall art
Sarah is a friend from RCT. 139 mm long x 49 mm high x 20 mm deep. Made using SketchUp and the Georgia font. Print instructions No rafts / No support 0.3 mm resolution at 15% infill Designed using SketchUp.
Customized version of http://www.thingiverse.com/thing:739573 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: font_size = 12 minimal_color_layer_thickness =…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Galatasaray String Art. No AMS needed. Print at 0.2 layer height.
That's what happens when greed outweighs footwork. That Sunken Treasure ship is the wreck of the gambler's city, Al'Sarab Ciudad de Fortuna. The ground around it is soft sand, easy to sink in, and the prize is a hoard of the casino's…
Sara is a friend at Alimentiv. It is 142 mm long x 50 mm high x 20 mm deep. It is created using SketchUp 2015 and the Arial Black font. Print instructions Printed using PLA at 15% infill.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%. Filamento BASICO de Control 3D en varios colores (Español). Espesores de las capas amarillo 2mm, negro 1mm y blanco 0.8mm Kingroon KP3S Printed with 0.4 nozzle, layers…
white until 5.4mm orange until 6.2mm maroon until 6.8mm finish with black
This is a scan of the Dying Gaul sculpture at the Ringling Museum in Sarasota, FL. I missed some important detail on this scan (like, the entire face) and it turned into a practice test for using the Sculpt mode in Blender 2.8. The right…
Jan 2020: It may be worth checking out my latest design - Hydra Fan Duct & Tool Change System which IMHO is far better in a lot of ways than this Hero Me remix. Link: https://www.thingiverse.com/thing:4062242 Update:16_01_20 Uploaded…
Here is a figurine of Sarah Scribbles, based off of Sarah Anderson's awesome comic series. You can follow her here: https://www.facebook.com/DoodleTimeSarah/ This was made with Blender and prints well with supports and a raft. The rabbit…
I needed a way to store my aluminum foil on my pantry door as it made the most sense for quick access with the way my kitchen is laid out, so I made this. It can also be used for other things like saran wrap, parchment paper, some ziplock…
The kite 3D design has 11 connectors that have been 3D printed using PLA+. Each connector is designed to be lightweight and compatible with rods that have a 2mm diameter. The connectors are designed to be assembled by the user, making it…
A caricature of Elisabeth Sladen as Sarah Jayne Smith from Doctor Who (the 3rd doctor)
The 9th colossus, Basaran. Note: I did not create this model. It is from Shadow of the Colossus (PS2) Category: Creatures
only two statues, sorry. Tinkercad couldn't process the file as it had got too big. i will have to print separately and stick them on. Oh yeah, and I couldn't find any suitable saracens. Addendum:- As I said, the files were too big to put…
letra grande em branco nome em roxo colados com fita dupla face
Fragment of an Apsara, a Hindu tempel dancer, which has been broken brutally from the temple wall which made her loose both arms. I've seen many of similar covering walls and columns in Hindu temples such as in Hampi or - spectacularly -…
Italiano Questo design è gratuito a beneficio della comunità, ma se ti piacciono i miei design e vuoi contribuire, puoi fare una donazione a PayPal , che sarà molto apprezzata. Questa è una scritta decorativa che puoi stampare in…
https://www.hi3d.ai/share/097fbade8c344dd1beb8057444842e0a?inviteCode=Y8Axoeva9P&shareType=history_model
It's been secretly bugging me that there was not a single model with an Apsara (at least search found none). Now I discovered how easy it is to create a lithophane with FreeCAD and voila! - here we go. I took the picture in Angkor Wat…
Saracen Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) Figures and Monsters: https://www.printables.com/@StudioMechanik/collections/3030657
Small trunk line holder for Citroen Xsara Picasso. Part is designed to be glued in. Should be printable on any printer without any problems. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0,2mm Infill:…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Galatasaray Coaster Bierdeckel Beer Mats For 6 Coaster Bierdeckel Beer Mats I have remixed this original model with permission of the owner. https://www.printables.com/model/1246950-bober-kurwa-beer-coasterbierdeckelbeer-mats
Nyssara Venomkiss is the silent blade of the Dark Elf court, an assassin whose name is whispered only after the killing is done. Where soldiers march beneath banners and sorcerers command the battlefield, Nyssara works in the spaces…
English : If you have lost or broken the plastic piece that hold the headrest inside the headrest guide, make sure that you still have the metal string that make contact with this piece. if you do have it print the model “avec ressort” if…
Customized version of http://www.thingiverse.com/thing:1220978 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1220978 Instructions Using the following options: width = 20 length = 60 font = 0 name = Sarah…
For some reason I like her smile the best. Thousand years apart though. 43,6x101,18mm, 0,3mm base Category: 2D Art
Kleine Spardose die ich für meine Tochter gemacht habe. Zum öffnen muss die dose zerstört werden. Sollte mit jeder Art von Druckern ohne support druckbar sein.
Hello everyone, I previously created a design for Galatasaray. Many people requested that I remain faithful to the original logo and update it in that manner. Presenting the Galatasaray Lightbox V2. For ease of installation, insert the…
Herkese merhaba, Daha önce 4 büyük takımların Lightbox, Kalemlik gibi bir çok tasarım yaptım. Bardak altlığı ile seriye devam ediyoruz. 4 tane bardak altlığı koyabileceğiniz stanttı da basmanızı tavsiye ederim. Taraftar Lightbox,kalemlik…
lampe led Sarah sans trou a faire sois même ou vous voulez on peut la poser sur un meuble ou la fixer au mur
Osterhase Sarah / Easterbunny Sarah
Freddie Mercury (Farrokh Bulsara) – Buste Ce buste rend hommage à Freddie Mercury , né Farrokh Bulsara (1946–1991), chanteur légendaire et figure emblématique du groupe de rock britannique Freddie Mercury. Connu pour sa voix…
prosauropod from the early Jurassic Kayenta Formation.
I designed a 4x penholder for Gridfinity that would fit my Zebra Sarasa 0.5 pens and by accident it also fits the Edding 751 just fine.
Can be used with any type of filament, printer or printing configuration.
Today I designed a storage box for sewing accessories , specifically modelled to fit inside the bottom container of the Veritas Sarah sewing machine . The goal was to create a clean, organised insert that makes better use of the available…
Dolmabahçe Sarayı Saat Kulesi İstanbul Türkiye Lithophane
I printed the rear window regulator pulley for the Citroen Xsara Picasso with supports in PETG, and it has been working daily for more than three months. I have some ideas for making it stronger, but I'd need some photos of break points…
This is a scan of the sculpture 'Portrait Bust of a Man', currently on display at the Ringling Museum in Sarasota, FL. From the site: According to an inscription on the base of the bust on the left, the sitter is meant to be Francesco…
The 9th colossus, Basaran. Note: I did not create this model. It is from Shadow of the Colossus (PS2) Category: Creatures
Working on name tags for friends and will load all here. DM if you need a special name. Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** No Supports: No **Resolution:** 0.16 Infill: 20 **Filament:** eSun PLA White Category:…
I was invited to a House Warming Party and I knew that the couple had a little girl. So in addition to the gifts I would normally have brought, I made her Sarah & Duck Cookies. As always, I am including my basic Sugar Cookie Dough Recipe.…
Depending on the tolerances of your printer, you may have to scale the Stop to get a good friction fit. V2 has conical internals for better printability. The stop is slightly longer and may not go in all the way, this is intended to…
84,24 x 63,08mm base of 0,5mm, layerheight 0,1 Category: 2D Art
Celestial_Beauty_Apsara Category: Sculptures
Book Markers Mark II, Sara, Nell, Monica, Michael, Maria, Lynn, Laura, Kim, Josh and Gerri.
Works better than the original clip. prints easily with PLA,PETG,ABS. As always I have added the parametric Fusion360 file, so feel free to mess around. I have printed with 0.28 layer height, 25% gyroid infill and 4 outer walls.…
Introducing the Sci-Fi Sarah Head Bust! This is one of my practice models I used for creating hair from curves, clothing, and facial sculpting in Blender 3D. She has a semi-realistic face combined with stylish shoulder length hair and…
fits heads width approximately 22 inches or 56 cm
I recently went down the internet-browsing rabbit hole to find the best pens for my new Moleskine notebook. They had to have fine lines, flow well, and dry reasonably quickly so that they did not smudge the pages. The internet led me to…
This is a model of the Saratoga Springs Temple that has been hollowed and has space for a small battery powered tea light inside. I cut holes through the model where the windows go so light can escape it more freely. This model will need…
I've lost the windscreen washer fluid reservoir cap on my Xsara Picasso. Here's a replacement, to be printed in flex filament (eg TPU98)
A cheerleading name tag with a pom pom icon and flowing streamers. Four depth layers for multi-color printing, no supports needed. https://www.plainmesh.com/edit/cheerleading-keychain
Bring legendary determination to life with this incredible 3D printable Sarah Connor STL model that captures every detail of the iconic warrior. This expertly crafted figurine showcases the battle-hardened hero in tactical gear, ready for…
Osterei Sarah mit Hasenohren / Easteregg Sarah with Bunnyears
Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Sarah line2 = line3 = line4 = line5…
This is Galatasaray logo. Its not perfect I hope you'll like it. :)
Sara name tag. Print Settings Printer Brand: Prusa Printer: i3 MK3 **Rafts:** No Supports: No **Resolution:** 0.16 Infill: 20 **Filament:** eSun PLA White Category: Signs & Logos
Vase Sarah Material : PLA oder PETG / Material : PLA or PETG Perimeter: 3 Infill: 20% Gyroid
Hello everyone, I've made a few changes to this design. Instead of using adhesive for the desk stand, I've switched to a screw system. If desired, the screws can be removed to make it suitable for wall mounting. I've also made the…
Alvis Saracen military vehicle model stl 3d printable for display and diorama of a real armoured vehicle. This scale model is ideal for display shelves, dioramas, collectors, and tabletop wargaming scenes featuring an Alvis Saracen…
S.A.R.A. (Sail And Race Audioguide), créée par l’association ORION, est une application de guidage vocal pour les régates particulièrement adaptée pour les marins déficients visuels et non-voyants. Cette carte 3D permet de se projeter…
printed with pla 20% infill 0.2 layer high
I really love the webcomics of Sarah scribbles made it by Sarah Andersen. http://sarahcandersen.com/ For this last christmas I bought her book as a gif for a really good friend. I decided that a Keychain with Sarah could be an awesome…
print 2 of these, put m3 nuts and screws in, and tighten it up. it should be able to get pretty tight.
EN Window clip designed for Citroën Picasso Xsara 2005, may work with other variants. I recreated the model based on a scan, so the dimensions are not exactly the same. This clip holds the window in place when you open/close it. I've had…
My original design for a handle for the Saramonic Blink500 B2+. Securely holds the microphone as long as the built in clip is still present. Even holding it upside down i cannot shake it loose. It allows access to all buttons and doesn't…
Ostereiei Sarah / Easteregg Sarah
4 Farben,bei Layer Farbwechsel