61 modeli
This is an articulated model I sculpted of the creature from The Elder Scrolls Online, Tremorscale. A duneripper boss from one of the dungeons in the game (Volenfell). Support me on Ko-Fi! https://ko-fi.com/zunasw Printed on an Ender 3…
This is a model taken from the Elder Scrolls Online with some smoothing applied. This model is available as one whole piece which is 170 mm high, or split into parts that assemble into a statue about 40 cm (15.8 inches) high. The statue…
The Elder Scrolls V: Skyrim Emblem *flat -→ self explanatory. note far right emblem.
Skyrim Logo. Raised. Whole without a broken piece
Accessories for Betrayal of the Second Era boardgame from Chip Theory Games. Mini Chip Organizer This is a drop in organizer to sort the mini chips into their three categories: Overland, Stats, and Skills. There is space for 16 additional…
Title says most of it: Made some keycaps using the Skyrim map markers, and threw in the oblivion logo since I had a nice quality render of it. Be sure to use the ‘settlement’ as your home key! The logos are 1 mm raised, and I intend to…
This is the Pact Dragonclaw Circlet from the game Elder Scrolls Online. https://elderscrolls.fandom.com/wiki/Pact\_Dragonclaw\_Circlet To be printed and worn on your head, or to decorate a shelf. It's designed to be printed without…
This is an unofficial insert for Chip Theory Games' Elder Scrolls: Betrayal of the Second Era. I wanted to create something that would make setup and teardown as painless as possible while also allowing for modular setups based on your…
This are all the sculpts and models I made for TESOctober 2021, posted on my Twitter here: https://twitter.com/ZunaSW They are all using prompts from Zenimax Online, and basing them on their creatures, thus the creature concept credits go…
These are all the sculpts I made for TESOctober 2022, of which I posted their renders in my Twitter page here: https://twitter.com/ZunaSW They are all using the prompts Zenimax Online Studios put up. I based my sculpts on their creatures.
I made these three models for the TESOctober in the year 2020. It was all I did that year, and while they were not all the prompts, they were pretty neat to 3D print.
I made this 3D model in 2018, for a friend, of his own argonian character from elder scrolls online.
I made this Kaalgrontiid back in 2019, to try out my resin 3D printer. It is a dragon from The Elder Scrolls Online Elsweyr chapter.
I made this digital sculpt backn in 2018 when I was learning 3D. It is a daedroth from Elder Scrolls Online. It is actually a daedroth later on used in Beyond Skyrim Cyrodiil. I never got to print it, but I wanted to share it.
3D model I sculpted of Kjalnar Tombskald from Elder Scrolls Online, commission ordered by zbzszzzt123 on Reddit. The head doesn't have any detail, as the original commissioner already had one they were using.
I made this digital sculpt in 2021, for a prompt Zenimax Online Studios made in their twitter in which the community could create any creature based in the world of Elder Scrolls, that could fit in Oblivion. This is what I came up with.
I made this 3D model two years ago as I felt inspired by ZOS' new DLC Markarth for The Elder Scrolls Online. Arana is one of the main characters in that DLC, and I really liked her. I never got to print her, but I had the files ready, so…
A digital sculpt I made a while ago on 2021 for New Year for the community, never got to upload it, so here it is. I also never got to 3D print it, but the 3D model is fully prepared for 3D print.
It's just an iron dagger, but in 16 times the detail. Anyway… This model is based on its appearance in The Elder Scrolls V: Skyrim. 2 Versions: Simple template for your own sculpted design & detailed prop. Game accurate aspect ratio, but…
The Elder Scrolls Online Logo. I will post pics when its done
Objective map marker from the Elder Scrolls V: Skyrim made into a keyring Category: Accessories
3D model I sculpted of an Arcanist from The Elder Scrolls Online. Commissioned by zbzszzzt123.
These bases add a simple way to both determine and track which card a miniature references. Several roaming enemies in Skyrim - The Adventure Game can reference one of two cards. Due to this, you can't use just the miniature if there are…
About Organize all the Encounter, Delve, Specials, and Guild cards plus their respective chips into boxes specific to each region. These were designed in the style that you see with board game insert master js500 and Hextra . I have…
This is a skyshard token for the board game Elder Scrolls: Betrayal of the Second Era. Skyshards are collected during Delves, and accumulated in the game as a stack of cards. These skyshard tokens can be collected instead, and can also be…
Very simple runestone made for miniatures. I suggest to use Filament printer and slap some modelling textures like Citadel Stirland Mud / Astrogranite. Don't forget to add moss effects. If you have any suggestions, let me know. I can do…
"A new hand touches the beacon. Listen. Hear me and obey. A foul darkness has seeped into my temple. A darkness that you will destroy. Return my beacon to Mount Kilkreath. And I will make you the instrument of my cleansing light." I…
My friend did an Uchiha ninja cosplay, and wanted to make something from the Hidden Leaf Village for his pet bunny. Can pass it off as a summoning scroll for non-naruto anime fans
The Elder Scrolls V: Skyrim Emblem with base for your desk
I made this digital sculpt back in 2021 when Zenimax Online Studios did a prompt for the community to make art from called Gates Of Oblivion, in which artist from the community had to create a creature based on ESO and daedras from Elder…
I was having problesm with my Hegner scrollsaw as the original metal insert plate has been damaged several times by accidental blade contacts. So I designed a spare part, and another one for more fragile pieces such as ice cream sticks,…
@Friedmutant created some excellent token holders for Elder Scrolls: Betrayal of the Second Era here: I loved the idea of having the tokens stick to a magnetized map, but found a bare metal sheet as a base both unattractive as well as…
These are dividers for the chip storage trays that come with the board game Elder Scrolls: Betrayal of the Second Era. The enemy draw bags must be set up using a mix of general chips and four province-specific chips. All of the chips have…
This is the carpenters bench you use to build a house in Elders Scrolls 5 Skyrim. I based the model on some pictures I found on the web and a screen shot I took from the game. I drew a ruff cad model basing of a life size work bench then…
Organizer for character cards and resource dices. Remix of https://www.thingiverse.com/thing:4841248
Create a rich, immersive interior setting with this detailed modular bookshelf wall. Featuring multiple stacked shelving units filled with books, scrolls, and assorted tomes, this piece instantly transforms any scene into a library,…
It's just a beehive, but in 16 times the detail. Anyway… This model is ripped & remastered from The Elder Scrolls V: Skyrim's game files. Game accurate aspect ratio, but size may differ. Currently scaled to 25mm / 28mm scale. Easy print…
This Arcane Scholar Wizard captures a powerful mage deep in the study of magical knowledge. Standing atop a base piled with ancient books and rolled scrolls, the wizard reads from an open spellbook while casting a spell with his free…
Sultan of Magic Scrolls Category: Creatures
Dear fellow makers, This is a stand for the original player quest markers of the board game 'The Elder Scrolls V: Skyrim'. The cardboard punch-out marker (2mm thick) slides perfectly into the holder, is kept in place well, and is much…
Elder Scrolls Betrayal of the Second Era dice trays with skill line logos. This is a remix of the dice holders from the excellent insert by davidsaurus (see:…
Qumran Storage Jars and the Dead Sea Scrolls The Dead Sea Scrolls were discovered in caves near Khirbet Qumran , close to the northwest shore of the Dead Sea. Many of the scrolls were stored inside distinctive large ceramic storage jars ,…
These are extra scrolls for Scribblish! They enable you to play with more than six players. The design has three parts: the main "scroll" and two sides that need to be glued to the sides of the "scroll." Support My Work Should you want…
A very basic insert design for the Wen 3921 scrollsaw. The one that came with it is a bit flimsy because it has cut outs for both directions of cuts. Step and Fusion360 files for modifications.
I was having trouble with the seeming pointless hole in the torso and helmet when resin printing so I have removed them so I could properly hollow them in chitubox, other than that, the files are exactly the same quality and size etc as…
scrolls small enough for a typical DND character to hold. Perfect for DND campaigns or as fun medieval Funiture. Category: Model Furniture
Throat plate for Carbatec scrollsaw, as mentioned in https://www.youtube.com/watch?v=gpDB37-ML48&feature=youtu.be Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Category: Machine Tools
Mine was printed on MK3S+ with standard 0.2mm PETG Settings, and just glued on the side of the stand.
These buttons are a very simple, round design with The Elder Scrolls IV Oblivion logo recessed into them. These buttons are great for cosplay or if you just want a little flair on everyday clothing. The buttons are 20mm in diameter and…
A stylized steel dagger from The Elder Scrolls V: Skyrim, perfect as a toy for a little Dragonborn. Available in two versions: split into halves for bed printing, and a solid version that can be printed vertically. The connectors can be…
Replacement air-hose connector for Proxxon DSH scroll-saw (ca. 1995) Bit of a tight fit for the original hose, but does work quite well Category: Parts
This is based on the Golden Claw from The Elder Scrolls V: Skyrim, but the Lego piece for the bead contest. PLA 0.2mm all layers Temp- 220° Bed Temp- 60° Top/Bottom shells(the only option I used for the whole print)- Rectilinear Sparse…
Made a very simple "adapter" for handing multiple wall scrolls under each other. Print Settings Printer Brand: TEVO Printer: Flash Rafts: No Supports: No Resolution: 0.1 Infill: 25% Filament: Devil's Design PETG White Notes: The…
This is a simple version of the pump cap with The Elder Scrolls Oblivion logo cut out of it. This is a simple version of the pump cap with The Elder Scrolls Oblivion logo cut out of it. The intention is to set the RGB lighting to a…
Hello there, I am a big fun of ETS board game. While this is an amazing board game the only disadvantage of the game (and other CTG games) is moving the chips around. Especially it gets very difficult in 2 / 3 sessions where your party xp…
"A new hand touches the beacon. Listen. Hear me and obey. A foul darkness has seeped into my temple. A darkness that you will destroy. Return my beacon to Mount Kilkreath. And I will make you the instrument of my cleansing light." I…
Create a rich, immersive interior setting with this detailed modular bookshelf wall. Featuring multiple stacked shelving units filled with books, scrolls, and assorted tomes, this piece instantly transforms any scene into a library,…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Amulet of Kings from TES Remaster. The supports required. Some parts…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Aela the Huntress. The supports required. Some parts need to be printed…
![Elder Scrolls: Betrayal of the Second Era + Valenwood Insert [BOTSE]](https://media.printables.com/media/prints/ed39d689-aa74-45c4-a73b-b7868a6e8d2b/images/9344262_8cdb6e5c-a286-496d-9d72-5825fda4b6a5_6aeab8d4-e50f-4fe0-a339-ffeb344c9761/cover.jpg)
