54 modeli
Make delicious duck toller or other retriever biscuits/cookies for the kids to decorate. Suggest a gingerbread base such as https://www.bbcgoodfood.com/recipes/ultimate-easy-gingerbread . Can use white icing for the white markings and…
The stand is specifically for the USDT (Ultra Slim Desktop) version! There are other versions with different dimensions! This Mini PC doesn't sit flat on a surface (when standing vertical there is a small gap undernath it as seen in…
Parallel Board for ISDT Discharger with 6 XT60 Ports. To discharge multiple LiPo batteries at the same time when the weather or plans change. I got two ISDT dischargers to discharge multiple batches of batteries at once. Solder all…
This is a ISDT K4 Charger Stand that clips onto the charger and holds it at a 130 degree viewing angle. It requires 4x M3x14 Countersunk Screws 4x M3 Nyloc Nuts The pictures I uploaded had it assembled with M3x16 countersunk screws. I…
Simple cover for ISDT BG-8S mode of TPU http://www.isdt.co/bg-8s.html http://aame.work/2017/11/05/isdt-bg-8s-tpu-cover/ Print instructions Category: Hobby Summary Simple cover for ISDT BG-8S mode of TPU http://www.isdt.co/bg-8s.html…
I designed this to fit in the front of the HP 800 G1 USDT if you are not using the DVD drive and want to replace the drive with a drive caddy, or leave it empty. I spent alot of time adjusting the scale of the item to try and get all the…
This case protects the ISDT BG-8S battery checker without affecting the functionality. The connection between the XT-60 and the balancer connector had to be quite thin but the plugs can be inserted more than deep enough to read the…
The ISDT (and its LIMETA clone) are probably the best rechargeable battery chargers on the market right now. These chargers are extra powerful, and as a result they can get seriously hot when many batteries are charged simultaneously.…
Angled / Vertical Holders for LiPo Chargers from ISDT and Spektrum for a Tidy Desk Organization.
Ein Adapter Um 4x18650 Zellen anstelle von 2 Parallel zu Laden / Analysieren. Nur für den adapter wird stützmaterial benötigt... Die Sicherheitsbegrenzung für die Ladekapazität muss allerdings deaktiviert werden, da in diesen Slots max…
ISDT BG-8S Smart battery checker Screen Protector printed with PTU-92a filament. Easy to install and remove due to flexibility of the material. Temp 215°C, 0.20 mm, infill 30%
A solid bracket to wall mount your ISDT N8 N16 or N24 battery charger. I printed it with my Prusa MK4 with the standard 0.15 Speed using Jessie PLA. Use: Print two brackets and slide them on the sides, then mount the charger to the wall.
I love the iSDT Q8 charger. I also love having the parallel adapter to charge several batteries when I'm at a F5J contest. For a while I just dragged around these two with their cables hanging with one device hanging from the other. I…
The ISDT SC-608 is a lovely charger, compact and light but maybe too small and light sometimes as it can be hard to keep the thing on the table! so I designed a cradle/holder to allow it to have a little bit more surface area. Seems to…
ISDT Q6 Plus and ISDT PC-4860 1-8S Safe Parallel Board XT60 Parallel Charging Board Storage Box. Ideal charger for charging your RC batteries in the field and should fit in your FPV backpack. Storage Box should fit the charger snug and…
ISDT P20 Charger Screen Protector printed with PTU-92a filament. Easy to install and remove due to flexibility of the material. Temp 215°C, 0.20 mm, infill 30%
ISDT 608AC USB PowerDelivery adapter --- This STL allow you to change the stock AC power supply of the 608AC to be USB-C compatible over PowerDelivery specifications since nowadays everything seems to run off USB-C PD. I'm running mine…
I picked up an ISDT BattGo BG-8S Battery meter and wanted a way to mount it on the battery so I designed a case for it. This is meant for a SLM24 LIFEPO4 24V 50A 8S 1200WH BATTERY from JAG35.com…
A Case for ISDT Q6 Nano with USB-C Power! -8 round magnets 6x3mm embedded in "top" and "clip", you have to pause the print to put them in! -Solder XT60 so PD board and glue PD board in the case -Put Charger in the bot part and push the…
It's a remix from Alexandr IDK (thingiverse) i just add a small hole to pass a lanyard and attached it to the checker. Post your makes!
Put your iSDT N8 charger up on the HSW. USB cable can be plugged into the charger while inserting/removing. The display is readable, touch buttons are accessible.
This is a cover for Lantian 24V power supply that is used often with lipo chargers like: ToolkitRC M6 ToolkitRC M8 ISDT Q6 You can buy this power supply here LANTIAN 24V POWER SUPPLY This simple cover protects from electric shock. It was…
Custom-designed holder for the ISDT N8 battery charger , compatible with the IKEA Skådis pegboard . The support is secured using the T-Clip system , ensuring a firm and stable attachment without wobbling. Optimized fit for ISDT N8 Easy…
I made this to help protect the screen on the ISDT BG-8S, I normally store my ISDT BG-8S in my charger bag and noticed marks on the screen and wanted to protect it. Plus I thought I could mount it on the wall if need be too. This way it…
Remix of the q6 nano holder for Ikea Skadis by Leif3D on Makerworld. Replaced the skadis hooks with a multiboard push fit. Printed in white PLA, 0.2mm layer height, 15% infill and 3 walls. Rubber mallet helps getting it installed ;) Remix…
LOGO TETHER HIGH QUALITY USDT Formats : OBJ
To develop the full power of the ISDT 608AC you can use an external power supply. I took an old laptop power supply (19V 120W), replace the plug with an XT60 and printed the parts attached. Be careful: The ISDT is rated from 10 up to 30…
Best Printed with TPU. PETG/PLA also possible. Quite a tight fit. You can scale the model if needed.
he Hitachi SDT-1000M was a high-end stereo system introduced in 1979. The system included a turntable, an amplifier, and a pair of speakers. The turntable was equipped with a diamond cartridge and a high-quality tonearm. The amplifier had…
This is a stand for ISDT POWER 200/200H/200X series charger, which has a MagSafe compatible charger on top of the unit, other than 3 USB-C and 1 USB-A charger ports. This stand makes the charger slanted, so that it can enable iPhone…
Based on the idea of the source, I also drew an insert for my Smart Charger C4 from ISDT.
Angled desk Stand for the ISDT Power 200x 5ch charger https://isdtshop.com/de-de/products/isdt-power-200x I use this thing as a Power Station for an KVM setup as well as charging an Iphone 14Max Pro with Magsafe case and Airpods from time…
HP Compaq 8000 USDT computer rackmount. Since I made a Minecraft server out of this PC, I decided to put it in a rack. I designed this simple rackmount for it, but maybe it will work on some other PC's. For connecting the parts together,…
ISDT UC4 18W 1.5A 1S USB Charger Storage Container to store 4 chargers. For ultimate tinywhoop fliers. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker…
Modified kone's model to have the two adaptors joined together, should be harder to lose and more sturdy in the charger. Category: Electronics
Držák je určen k uchycení na stojánek pro modely typu F3K a podobné. Lze vytisknout buď jako celek s ližinami, nebo ližiny zvlášť a následně je přilepit. Na stojánku drží nabíječka pomocí ližin a neodymového magnetu o průměru 20 mm a…
DSDTech USB to TTL Adapter for inline programming and reflashing of firmware
An adapter for the ISDT BattGo to supply power from a usb-c battery bank. Requires a "PD trigger module" to tell the supply to send 20v. Also an XT60. The trigger module I used :…
This model is designed to hold ISDT 608PD Battery Charger in Gridfinity Plate , which I use primarily for charging up my batteries for FPV-Drone, and so require it always to be at the easy to reach spot :) If there are questions or…
This is the 7th design prototype of my promised SDtoVita cases. EDIT: 7/30/17 MK7MOD1: Removed material in the center to create a small amount of clearance for the SD slot included on moredrugsmore3somes hardware. Previous design created…
ISDT Smart Charger 608AC Gridfinity kostenlos zum Downloaden
Print model for 19 Inch rack mount for HP Elite 8300 USDT. Print Settings: -Printed in PETG -0.15mm and 0.20mm QUALITY -External perimeters first -Supports: Only needed on the left and right bracket Keystones Needed: -4 Small -2 Large…
recommand to use pla-cf, to get better friction.
A holder for ISDT N8 charger (AA and AAA). I put in vertical to maximize space. Just 5x1 gridfinity squares. Printed in PETG, feel free to choose. Cheers.
If you own the ISDT 608PD charger, you probably know the struggle: the tiny stock fan has an incredibly annoying, high-pitched whine. It bothered me a lot, so I designed this hack to fix it. Disassembly: Please note that the original back…
This is a re-creation of Feyda's design from scratch, but staying as true to the original design as possible. Their file had a lot of excess geometry, and was "messy". This version is clean and manifold, and should print much smoother…
I created an alternative case for the ISDT K2 charger because in the original design the two fans are very loud. So i used a large 120mm fan for cooling in this case.
The case for Dell XPS to ISDT Smart Charger Device adapter. You need: 1x Dell XPS charging port replacement (see attached image) 3x M2.5x8 screws (update: due to the unpopularity, I will update model to M2x8) 1x XT60 female connector…
This part can manage your ISDT Charger and creates room for a lot of 2S Lipos.
This Gridfinity box was designed to keep the charger neatly stored and protected while making the most of your drawer space. 🧩🗄 And because the charger rarely travels alone, I added a small separate storage tray ! ✨ It is perfect for…
A holder for ISDT N8 charger (AA and AAA). I put in vertical to maximize space. Just 5x1 gridfinity squares. Printed in PETG, feel free to choose. Cheers.
This model is designed to hold ISDT 608PD Battery Charger in Gridfinity Plate , which I use primarily for charging up my batteries for FPV-Drone, and so require it always to be at the easy to reach spot :) If there are questions or…
Custom-designed holder for the ISDT N8 battery charger , compatible with the IKEA Skådis pegboard . The support is secured using the T-Clip system , ensuring a firm and stable attachment without wobbling. Optimized fit for ISDT N8 Easy…
