126 modeli
Hello, Today I have Japanese scythes, sickles for you. They are ideal for opening boxes, or perhaps as an accessory for cosplay. They are not sharp! They are not dangerous. You have 2 models from me, one is whole and the other is in 2…
Wydruk około 2,27 €–2,77 € nettoWstępna wycena jednego wariantu
Passgenaues, akustisch optimiertes Schutzgitter im Waben-Design (Honeycomb) für quadratische Lautsprecher-Chassis mit 66 mm Kantenmaß. Ursprünglich für die Treiber aus dem Dockin D Mate konstruiert, eignet sich die Blende für alle…
Wydruk około 0,94 €–1,14 € nettoWstępna wycena jednego wariantu
This is a hammer and sickle, the symbol of communism. I created it by getting this SVG: https://commons.wikimedia.org/wiki/File:Hammer_Sickle_Star_red.svg , using Inkscape to remove the star, importing it into FreeCAD, converting to a…
Was absolutely stunned by @Druz320 Canoe inspired SMOLBOAT case. I had to have it...but it was for ortho keyboards, too large to print, and I wanted to use my teensy mount as well as other things I learned from my previous keyboards.…
Do you have anoying commie friends? Print them hammer and sickle opener! Do you want to terrify your grandpa, who was under arrest in comunnist regime? Print them hammer and sickle opener! I recommend infill around 60% or 70%. Can be used…
06-12-2023: Apparently I'm an idiot because I never saw the comments saying that the scaling and orientations were stuffed up so I scaled them to ~8000% and oriented them all to Hopefully print well so I hope these new files work better.…
This is my recreation of death's sickles. This design not only folds and locks into position like in the movie, but they are also to scale and as close as possible to what we see. Printing: I recommend PETG or another tough material to…
2 part sickle for Dummy 13 based off Death's sickles from Puss in Boots: The Last Wish. It's 2 part so you can print the handle and blade in different colours.
1.- Motivation As with all prints I do, all start or from a need or a lust-to-have. As an additional hobby that I have is to grow hot peppers, and at the beginning of each season, I grow new seedlings from new varieties, therefore there…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Size 85x85x85mm. Wall depthm Body 3mm, Cover 2mm. For finish use glue for hard plastic (UHU. Tamiya...) when You need.
This model is compatible with the lego system.
You can easily do same multicolored key fob using Cura tools. You need to yose "filament change" script to do it. You can support me by visiting my community here
The SiCK-60 could really use a companion. This little numpad should be the perfect addition to your 60% keyboard. Built to be handwired with a Teensy 2.0 and costar 2u stabilizers. For more information on this keyboard along with full DIY…
From the movie Puss In Boots: The Last Wish Note: Some pieces may need to be scaled to 10000%
Offutt AFB static display aircraft B-17 Homesick Angel Category: Vehicles
A sickle representing the peasants of the world, to go with the respective hammer (https://www.printables.com/model/819618-mini-13-hammer) representing all the urban workers. Best to reorient it to be flat on the printbed and print with…
Following up on the SiCK-68 keyboard, the SiCK-60 is an more compact 60% option with the ability to use a wide variety of inexpensive PCBs as well as a version that can be handwired with a Teensy2.0 micro controller. For more information…
We were playing this week, and thinking, that it would be nice to have some kind of marker to show what cards has summoning sickness. So I made this. And because someone else might want to use these too, here! It was inspired by the old,…
Sickel This is a sickel modelled after Miraculix / Getafix / Panoramix from Asterix the Gaul. It looks like on the cover of The Golden Sickel ! https://www.youtube.com/watch?v=8m1kYK\_U66I Print Settings Printer Brand: Ultimaker Printer:…
Sick series logo for fans of Fabio Wibmer.
Coming from a low profile mechanical keyboard (Logitech G915) I wanted to try out a high profile mechanical keyboard without spending too much money on it, so I thought why not try and print a keyboard. I had keycaps from an old keyboard…
I really like Exner's medieval weapons and wanted to add a weapon idea to the mix. This is an experimental design, and i may need to do some adjustments. I have noticed the blade is a little tight on the screw, and you may need to set the…
I did not print this model myself (yet). There are 2 sickels with a long staff that fit in the hands of: dummy 13 1.0, dummy 13 Beta, easy 13, lucky 13 and mini 13 figures created by soozafone.
This model is compatible with the lego system.
Kasička ve stylu fotbalové AC Sparty Praha. Print instructions Tisknuto na MK3 nejsou potřeba podpory snižte rychlost tisku při tisknu částí se závitem
The bottom-left part of SiCK-68 keyboard modified to accept a Waveshare RP2040-Zero microcontroller . Has a snug opening for the USB-C port and the controller is fully constrained – you won't be able to wiggle it loose using a USB-C…
Hummer and sickle Esc keyboard I just reupload it on this website because I searched a lot to find one like this
HOn30 Mt. Sicker ore car Category: Vehicles
This is Getafix's sickle from Asterix. I quickly drew it up looking at pic from the front of one of the books. Borrowed a little inspiration on the base of the blade from Asterix and the Golden Sickle, but otherwise the details match…
Shoe dryer, 140mm Fan standart PC. I used Arctic P140. Cabeling could be solved by many different options. My inspiration was Noctua NV-AA1-12 but with more practical usage. It could dry shoes really fast and without heating to damage the…
There are many swords and knives on Printables, but few sickles. This one has a druidic/natural flair. Glue the two blade halves together and assemble. If you prefer the design on one side, you can double it, but don't forget to mirror…
Funny Sign - "I'm getting real sick and tired of food having calories" - dual colour design, printed in ZIRO Black and Overture Matte White PLA. For more funny signs see my (growing) collection of them here -…
You can choose between a lifesized or a lego-sized version. The lifesized version is about 30cm long and is printed in two seperately parts (+1 connection part) which can be clued together.
This is a slightly modified version of the SiCK-60 (super inexpensive cheap keyboard 60%) Joined both sides into a single part (fits on a 300mm square bed) Re-modeled everything so I can provide a .STEP file (easier to modify) Adjusted…
Hammer & Sickle Directions: Print hamsick face down with some inflill Print back face down no infill Print plugs Align and fit hamsick through back holes gently. Super glue plugs on back to secure pieces Hang from wall Remix of model by…
drzak na kapsicku. na zpusob https://www.homolkovic.cz/drzaky-obaly-na-kapsicky/drzak-obal-na-kapsicku-dopravni-cerna/
First of all, I want to thanks FedorSosnin for his amazing work on the SiCK-68 project ! My project is to adapt the SiCK-68 Mechanical Keyboard to my usage. Changelog Add a LED strip in order to light the keyboard (wiring available in…
Hi, I decided to add here my first model which is this dice. Dimensions are 16x16x16 mm . I recommend setting the infill to greater than 50 %. for more dice weight I hope you'll enjoy!
I printed this with the back of the gate parallel to the bed so any scarring that may occur from supports would be hidden. Of course, you know your printer's capabilities, so print it in a way that works best for you. If perimeter lines a…
kasička plechovka na ůkol do školy a do soutěže
This is the first version of a guitar wall stand I've made. UPDATE 1: I realized that it might need only a bit more distance to the wall for some guitars (specially acoustic guitars) so i added a base as a separate object so that it…
sorry I didn't find any information about this dagger, so you can correct the name and tell me which game or movie it's from. I found it on the Internet by looking at photos and made a 3D model based on it
This design is the same as the SICK-68 but without the top logo platform.
The Ultimate "Called In Dead" Office Humor Sign! 🤣 You know the feeling, right? This sign perfectly captures that end-of-the-sick-days mood! With its eye-catching yellow and black design and an adorable skull, it's the ultimate piece of…
Remix of Mechanical Keyboard - SiCK-60 (60%) by FedorSosnin where the top-left+right and bottom-left+right parts have been merged as per a request on reddit. Merged using Fusion 360. Print Settings Rafts: No Supports: No Resolution: 200…
This remix of the SiCK-68 mechanical keyboard changes the lower left part of the keyboard such that is able to fit a Raspberry Pi Pico microcontroller. The next iteration of this Thing would add mounting screws for the Raspberry Pi Pico.…
Źródło oznaczyło ten model jako treść 18+.
Remix of the Sick68 keyboard case by FedorSosnin on thingiverse. Cherry style stabilizer mount remix by spv_one on thingiverse. I've changed the lower left part of the case so there's more room to fit a teensy inside, as my test prints…
A full-size decorative sickle prop with a sweeping curved blade and a handle modeled to resemble carved wood. Designed for cosplay, LARP, theater and historical displays, it prints in one piece without assembly and can be painted for a…
This is for an Essick Humidifier, Model #836000HB. As you can see in the images this unit pulls air in through the top then blows it out the front of the unit. When it comes out it goes straight up and I felt like it was pulling most of…
Sickle keychain. It has 46mm x 30mm x 3mm sizes. You can rescale it if you want.
Remix of the Sick-68 bottom part by https://www.thingiverse.com/fedorsosnin Instead of the original design with USB Mini-B this design uses USB-C (Elite-C V4).
I remade the original sickle and republished the new model. I figured out how to split it into more manageable pieces. Now you can fully reap the godly benefits.
A Variation of PRINTER's Wind wheel, with a nauseous emoji on the rotor!
Feet for Sick-68 Keyboard. They cause it to rest at a five degree slope. You will need to print two sets of feet.
DANGER - CHOPPER SICK BALLS, sign (Stand By Me) Stand By Me clip: Category: Signs & Logos
Some of these swords will need supports so if you are struggling to print that's probably your issue
Simple model of the water tower at Trelissick in Cornwall, UK Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Filament: Ultimaker PLA Yellow Notes: Can be printed without support Category: Buildings &…
This was originally created by dbgeorge at https://www.thingiverse.com/thing:4081159 , I searched for forever online to find a copy and gave up, then a few months later I found the files buried in my iCloud drive and am uploading for any…
A simple “snap on” blade guard for the Zenport K310 garden sickle. It did not come with any sort of adequate protection, and they wanted $35 for a leather sheathe, so I opted to create my own guard. 30 minutes in Blender and about an hour…
This is a custom case to fit reel to reel albums designed around the art of Ren's album Sick Boi You need a printer with material exchange capabilities to print this model. The reel spool will be shared in a different upload.
Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Red PLA BambuLab Basic Yellow PLA BambuLab Basic This print uses 4 unique filaments Swap Instructions: Layer height .08 Initial layer height .16 Start with Black At layer #8…
Box na kartáčky do sprchového koutu klasický / hornický Dva modely: klasický hornický Na svislou trubku o průměru 22 mm. Přichycení elektrikářskou stahovací páskou.
A remix of the amazing Sick-60 design to support cherry-style stabilizers, re-designed completely in Fusion360. Now also including an angled version with a 5-degree incline. The design is using the same dimensions as the Sick-60. The top…
I printed this on it's side with regular supports and it came out pretty okay. The Handle portions are a little less on the snug side but any thicker and they would have been too large. Kinda just a neat thing I made on stream.
These are the Ice Sickles from the video game Grounded 2 (there is only one file but it should be symmetrical so simply print it twice for dual wielding). This 3D printable file isn't endorsed by Obsidian Entertainment, Inc. and doesn't…
Both pieces need to be scaled together at once in the slicer, supports will be needed. Selling this model printed is completely fine with me but do not reupload my files or claim it as your own!
Light barrier holder Sick WTT12L Bracket for light barrier/light button industry zur Befestigung einer Lichtschranke von Sick Typ WTT12L an einem ITEM Profil for attaching a Sick type WTT12L light barrier to an ITEM profile
hammer and sickle made by an idiot commie
my third up and down, fractal star fidget
The top left part of the keyboard was modified to remove the original logo. This lends a sleeker appearance but also opens up possibilities for users to effortlessly incorporate their own logos or text.…
From the murky depths comes a truly unsettling creature – the "Sick Fishman" from Seasonwarez! This original sculpt is a slender, bipedal monster covered head-to-toe in a fascinating, rough, and prickly texture. Its large, vacant eyes and…
This band is a model based on similar medical bands used for relief from morning sickness, sea-sickness, motion sickness, and other nausea. This is the fourth version as tested on my wife to her approval. Print the band in TPU or another…
I made this for my Radclo controller so that I could have more grip on the joystick while flying. This is intended for a Radclo Quadcopter , but look at the size of it at the end of all the pictures. Fast Print! Printing Settings:…
Soporte para evitar golpes en una fotocélula SICK Wl100 montada horizontalmente.
DANGER - CHOPPER SICK BALLS, sign (Stand By Me) Stand By Me clip: Category: Signs & Logos
a sickle of sorrow for your dummy 13
Hello, this is my tissue box inspired by cold.
A wrist rest for the SiCK-68 keyboard with holes for push-in rubber feet. I used POF-40048 push-in rubber feet from DigiKey that have a 7.90mm diameter and a 3.7mm stem diameter. I printed flat and needed supports for the holes but it…
A 3D-printed frame in the shape of the hammer and sickle symbol. The spacing used is suitable for continuous LED strips, which create the effect of a neon lamp (for reference, the model used is the same as the one found at the link:…
I am learning Blender, so I thought this would be a fun beginner project. First, I added the remesh modifier, choosing voxelize with a very large voxel size. Then I went into edit mode, extruded a couple sections of the hull of the…
[EN] Created as a school project and fully tested on an Original Prusa MK4. Fits perfectly and rolls great! If you print this, please share your "Make". [CZ] Vytvořeno jako školní projekt a otestováno na tiskárně Original Prusa MK4!…
This is a Dispenser made for 3x3 Sticky Notes! It even has a working lid!
I made it cause my Sickspeed covers (19mm) are made of aluminium and to prevent them for any scratches, I make an opener for them. I Print it out of ASA CF15 which hold ~35NM (19mm version) 0,15 Layer high 8 perimeter 100% infill no…
Sick inspector robot vision 45x45mm extrution mount. Can be mounted as an extension to extrution if needed. Printed in pla, upright with no supports.
Držák čtečky čárových kódů Sick
Multicolor : Hi everyone! I don't have time to create a multicolored version optimized for those who don't have cfs-ams-mmu3 right now! If this model interests a lot of people, I might dedicate more time to it, but right now I'm not even…
A simple tabletop tracker for creature-token-heavy MTG decks. The frame holds one standard sleeved Magic card and has three dice positions for keeping track of your tokens: sickened – Untapped tokens with summoning sickness tapped –…
