Liczymy pasujące modele…
Mount designed for SimpliSafe, or other brands, Door and Window Sensor that can be mounted to a garage door. When the garage door opens the sensor will flip down showing the door opened. Printed on a Bambu Labs X1C using Bambu PLA Jade…
Doorbell camera wedged designed to improve the camera field of view. Included modes for left or right side installation with pivot angles of 10, 15 and 30 degrees. This was designed for the Simplisafe doorbell camera I have with dimension…
This is a 45° mount for the simplisafe doorbell camera. It has two pass throughs for the wall mounted screws and two for the simplisafe doorbell camera back plate. There is also a pass through for your door bell wires.
This is a remix from a wall mount on Thingiverse by spiceyux. I wanted to separate the parts into three pieces for shorted print times. I also changed the dimensions a little and added a lip for the bottom. After printing I used super…
Holds a SimpliSafe alarm water sensor down in the sump pump pit where it can sense high water level before it overflows. Two designs: One to clamp onto a 1 ¼" PVC pipe and one to clamp onto a 1 ½" PVC pipe. Adjust the clamp so it's just…
Based on wbphelps ' great design. You can now mount your SimpliSafe using GoPro style arms. This easily increases the range of motion for mounting. Uses normal M5 GoPro mounting hardware. I assembled with modular arms . Also, included is…
Summary Remix of wtrow"s Simplisafe Simplicam camera corner wall mount https://www.thingiverse.com/thing:5192178 Original Corner wall mount stl was giving me first layer issues so I fixed it. Also made a square version, a 10 degree right…
I like the look of the SimpliSafe3 home security key fob, but the buttons are too easy to push accidentally, so I created a case to both protect the key fob from being scratched and prevent accidental button pushes (including the panic…
Angled spacers from 5 degrees to 30 degrees to allow you to mount the SimpliSafe video doorbell in corners. Designed or SLA printing, but can be printed with high accuracy FDM printers.
This is a wall mount for the SimpliSafe Control Panel, that I created after seeing that the manufacturer did not offer it. Created from scratch in Tinkercad after seeing another model online. This is a tight fit (on purpose) and needs…
Needed a bracket to mount the camera in the corner, used some command strips and this mount.
I have a SimpliSafe Gen 3 system, but the base station is really bright when the system is enabled. So I made a light shield to help make it darker. Your first option: print the light shield in white. The light will still bleed through.…
Simple corner wall mount for the SimpliSafe base station. Looks good when paired with a cord cover. Printed with PLA at a 0.2mm layer height, tree supports on the build plate, and a brim.
You'll need to add some double-sided adhesive to mount it to the door. It's 1.5 inches tall. Feel free to modify for other sides.
A few months back, my Simplisafe sign was blown away during a nasty storm. Trying to save some money, I decided to model a replacement sign while making some small alterations to the wording on the sign. I designed this by finding a…
SimpliSafe only sells their entry sensors in white, which looks out of place on dark window and door frames. These covers slide over both pieces of the 2-part entry sensor — the active side (with the status LED and reset button) and the…
a replacement back for the simplisafe gen2 entry sensor main body (not magnet). close enough to spec that it operates fine. printed with PETG with PLA supports, .4mm nozzles, .25mm layer height and a high infill.
image was printed in PA6-CF but just about anything will probably work.
AnkerMake M5C mount for a SimpliSafe Indoor Camera to look down onto the print bed. Additional Things: • M4 Bolt 20mm x2 • M4 Nut x2 • Use the original camera mount from the link below. I used this person's print and edited to mount onto…
downloaded this one a while back and had a friend make it with his ender 3 before more door bell extensions became popular. ended up customizing it after to fit my wyze pro but will update a revised one to work. please give me a like if…
Slide out back plate covering usb cord. Slide in this one. Connect to whatever via 4mm diameter hole. Smaller the layer height the better it'll slide in.
Protect your SimpliSafe keypad from accidental button and screen presses with a slide-on case. Prevents any buttons being pressed from leaning, poking, or hitting in case your keypad is mounted in a high traffic area. The cover can be…
I needed an extra bracket for an original gen 1 simplisafe door/window sensor and found the basic model from Conando on Thingiverse. Wanted to add the battery support, the 3M command strip slot, and a bit of reinforcement on the locking…
This is a fixed angle Simplisafe indoor camera mount for use in a Lack, or similar, enclosure. The holes accept #8x1-¼" wood screws and find purchase in a Lack table just fine. I am including pictures of the mount installed as well as the…
Mount to install a SimpliSafe indoor camera looking down on your print.
The SimpliSafe® base station has a bright blue light that cannot be dimmed or turned off at this time. If the unit is in a visable location this can be very annoying. This shade fits the curved contour and slides over the top of the unit.…
SimpliSafe Keypad Sci-Fi Cover Give your home security setup a futuristic upgrade with this custom-designed cover for the SimpliSafe Keypad. Inspired by retro sci-fi control panels, this enclosure adds depth, texture, and personality…
Mount for Simplisafe doorbell camera. Stands off and has a 15 degree tilt to the right.
The SimpliSafe® base station has a bright blue light that cannot be dimmed or turned off at this time. If the unit is in a visable location this can be very annoying. This shade fits the curved contour and slides over the top of the unit.…
SimpliSafe Keypad Sci-Fi Cover Give your home security setup a futuristic upgrade with this custom-designed cover for the SimpliSafe Keypad. Inspired by retro sci-fi control panels, this enclosure adds depth, texture, and personality…
SimpliSafe Keypad Sci-Fi Cover Give your home security setup a futuristic upgrade with this custom-designed cover for the SimpliSafe Keypad. Inspired by retro sci-fi control panels, this enclosure adds depth, texture, and personality…
