580 modeli
Make organizing your Pokémon card collection easier than ever with this 3D-printed Pokémon Card Sorter ! Designed to help you quickly separate Holo, Rare, Reverse Holo, Promo, and more , this tool is perfect for sorting large amounts of…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
I printed from PLA, nozzle: 0,4 and layer 0,2. Print files for PLA , 0.4 nozzle and 0.3mm layer supplied. The only thing that will print from the brim on the backing is the drawer divider with the label. The other parts will be printed…
Wydruk około 0,80 €–0,97 € nettoWstępna wycena jednego wariantu
I wanted to grow my bee-friendly-area of my little apartment garden, so needed to get the seeds from the plants. I needed to sort seeds from the dry plant residue and saw the empty spool in my workshop. You can use it for whatever, I made…
Wydruk około 6,93 €–8,47 € nettoWstępna wycena jednego wariantu
Use the threaded holes and studs to measure thread sizes on screws and nuts. Has the following thread sizes available: English coarse thread sizes: 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13 English fine thread sizes: 14-28, 5/16-24,…
Wydruk około 3,97 €–4,85 € nettoWstępna wycena jednego wariantu
The sorter allows convenient storage and sorting of small items. The individual tiers can be stacked and the upper part of the sorter can be closed with a lid. Updated. Added a lid with holes, for mounting the top handle.
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
Two sizes of the bottom part: the height of the lower box is 50 mm, the height of the higher box is 70 mm.
Wydruk około 5,57 €–6,81 € nettoWstępna wycena jednego wariantu
Simple sorter for 20mm benchdogs
Wydruk około 3,10 €–3,79 € nettoWstępna wycena jednego wariantu
A tube adapter for the Sony FX500 Cell sorter. Should also fit the MA900 and SH800. Made when some of the adapters when some of them when missing. Printed on standard PLA settings for the MK3s+ printer, no supports. Print each part on the…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
EDIT: The top came out scratchy for me and the text did not show. I will definitely improve as soon as I can. Hang in there! I will be making an automatic battery sorter, with this ramp, an Arduino or Raspberry Pi, some servo motors, and…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
This amazing automatic M3 bolt sorter is designed for the specific bolts you can see in the picture. I don't know how it works with other M3 bolts, but feel free to try. :) Be aware that if you use m3Sorter_bottom_gridfinity.stl you also…
Improved Auto Coin Sorter - Coin Roll + Classic Version New in latest version 7.528: AUD - Australian Dollar update only. 50 cent coin dimensions increased to match the circumradius of the 12-sided coin. Should sort and stack just fine…
Newest Edit: 6-10-2024 New version follows the same concept as before but now the lid closes completely in both stacked and unstacked positions. Plus rounded edges for the little ones. Includes faster print time (albeit still takes a fair…
Holds 10 wrenches. Designed for a 20 Piece wrench set. Should fit just about any wrench. Original Fusion files included Printed on a Prusa mini in Polymaker PLA This work was based on other opensource work, and may inherit their license.…
Improved Auto Coin Sorter - Coin Roll + Classic Version New in latest version 7.527: Improved geometry to increase reliability and accuracy of the sorting. Improvements: Sorts into removable coin tubes to facilitate both general operation…
This mini metric bolt sorter is designed to sit on top of a drawer of Gridfinity bins. It has slots for measuring M2 to M6 diameter threads from 2mm to 42mm long. The lettering on top is 0.4 mm tall so it is designed to be printed with…
Improved Auto Coin Sorter - Coin Roll + Classic Version New in latest version 7.527: Improved geometry to increase reliability and accuracy of the sorting. Improvements: Sorts into removable coin tubes to facilitate both general operation…
A coin sorter for US coins - Quarter, Nickle, Dime, Penny. Just add coins, and shake to sort.
Warning the text and the body are separate parts within the 3mf to help with coloring.
UPDATE: I made a completely overhauled, updated design that fixes most of the flaws! Find it here! This battery holder fits a large number of batteries and allows you to automatically sort AA and AAA batteries. For me this was key, since…
*** UPDATED JUNE 2024 *** Version 2 (squared) is available and is being maintained here. https://makerworld.com/fr/models/374953#profileId-398255 *** UPDATED - March 2024: Japanese and UK version added as suggested in comments/chats. ***…
Hex nut sorter V2 Now including a fully customizable parameterized .scad! Let me know if there is a size you'd like added. No supports needed. Enjoy! What is it? A device for easily sorting all those hex nuts your kids dump all over your…
Edit: We've update the original to now include a revised mini version including: * Better stacking so the lid fits when both stacked and collapsed * Less printing time * Rounded Edges Get the new version here >>…
This is a remix of Vasilas' resistor storage drawers. https://www.printables.com/model/25285-resistor-storage-drawers I've added a box that fits my needs better: Now there are stoppers, so the drawers don't fall out and I also added a…
This is yet another version of a coin sorter for Euro coins. There are coin stacks for the five higher value coins 2€, 1€, 50c, 20c and 10c. In each stack coins are stacked together in groups of five to facilitate counting the value of…
I dropped one of my screw boxes and had to return this mess of screws and dog hair back into something usable. Measuring each single screw turned out to be a time comsuming pain. So this idea of a credit card sized tool turned up. You can…
Place the containers on the tray in ascending order from 1-7. Put the small change into the top tray. The cents embossed on the bottom fall through the sieve. After inserting the small change, shake a little. Then the tower can be…
STOP - BEFORE YOU PRINT THIS MODEL - CHECK OUT OUR NEW AND IMPROVED DESIGN HERE: https://www.printables.com/model/327900-stackable-lego-brick-sorter-sorting-box We store a lot of our LEGO bricks in two types of Ikea Containers, the Sanla…
Cable hanger to hang and sort different cables like USB C, HDMI, etc. Printed with Prusament PETG no support used
This battery holder fits a large number of batteries and allows you to automatically sort your AA and AAA batteries. For me this was key, since my drawers always contain a whole mess of random batteries. Well, no more! The tolerances are…
AAA & AA battery sorter / dispenser This battery dispenser automatically sorts AA and AAA batteries Single piece. assembly work is not necessary Easy to print. It does not require support structure Video Sorting mechanism On the slide…
It works with the same concept as the remix one so for functionality I strongly encourage you to check out the original, because I didn't print the result. I reccommend printing the top parts with the lettering upside down for better…
These trays will display your sorter boxes in an angle on your IKEA SKADIS board. I made them a while ago for all the boxes I collected over time, containing screws and other assortments. There are two different sizes: “small”: 134mm x…
U.S. coin sorter. Roll the ring around clockwise and coins will fall in their respective coin tubes. Tube lengths sized for roll amounts, Penny, Nickel, Dime and Quarter (50 cents, 5 dollars, 2 dollars and 10 dollars). I added a nut to…
More info on the build can be found here A quick little sorter/organizer for BHCS and SHCS metric bolts. Just stack them up, from smallest to largest, pour in your assorted bin of M2, M3, M4, and M5 fasteners, pop on the lid, then give it…
An attractive little tri-section sorting tray with optional lid, perfect for keeping those little bits around your crafting area organized. As designed, the tray is around 12 cm in diameter and 4 cm tall, but you can certainly scale it as…
An organizer for money bills and coins, with variants for different currencies. Update 01-16-2024: New versions with integrated coin storage, for different currencies. This started when my son asked me to print a holder for dollar bills,…
This model takes the concept of a rolling screw sorter from LayerLux3D and expands upon it to be fully Gridfinity compatible. The sorter itself has a 4x1 Gridfinity base and can be used with standard bins. Simply put it on top of the bins…
i remixed the design of COIN SORTER 100% PRINTABLE. EURO by neoprenox so that it would be easier to print and assemble and use less filament. and also to make the cranking so it dont need gears. i added a ramp with a cover to keep coins…
M3 screw sorter for M3 screws from 8mm to 40mm. As much as I liked the idea of the actual featured model of the M3 sorter it was not working good enough for my bolts , because many sizes which I use were missing and the used angle did not…
Improved Auto Coin Sorter V7.5 - "Short" US Dollar Version This is just a version of the universal (customizable, all-currency) coin sorter, omitting the 1 Dollar and 50 Cent coins from the standard US coin sorter for a more compact size.…
This is a lego sorting tray I designed after not being able to find one that would fit and fill the print bed on my Ender 3 Pro. The largest box is nearly the complete XY build area for this model. The trays all fit inside each other in a…
You put your coins in the little slots, and then put the thing in your cars cup holder. Pretty simple. If you would like to customize the design, download the .F3D file and open in Autodesk Fusion 360. Category: 3D Printing
Trivial screw sorter - 15 sizes, metric. Background: My 7 year old wanted to help sort the catch-all tray of screws but the calipers proved slow and boring, so "we" designed this plain guide/sorter and it worked like a charm in practice.…
The original "Amazing Gridfinity M3 Bolt Sorter" top only accepts <3mm heads. This version accepts 4mm heads.
DESCRIPTION: This is a gravity fed screw sorter. This is meant for metric screws and sorts from M8 to M28 screws. It also has detaching trays for easy use. PRINT INSTRUCTIONS: Print with pretty much any nozzle. Layer Height: 0.2 Infill:…
Used to sort US coins in multiples of ten, so they can be then stored in rolls. Never again mess up the amount of coins in a roll! I printed mine at a 0.15 layer height with 10% infill but I'm sure you can get away with a bigger layer…
Tired of messy piles of bricks and endless searching for the right piece? 😵💫 Meet LEGO Sorter Box Pro , a smart, modular, and fully customizable 3D printable storage box designed to keep your LEGO bricks perfectly organized, protected,…
Versions Two models with 200mm and 150mm length of the back-panel of the organizer were uploaded as .stl together with the freecad-file. The exact parameters for the two variants are listed in the attached screenshots. It is possible to…
First, fill Coin Sorter Tray 1 with your coins. Next, cover Tray 1 with the Coin Sorter Lid. Give the Coin Sorter a good shake... and keep shaking! When you're done……. Tray 1 will have quarters. Tray 2 will hold nickels. Tray 3 will…
print in pla and glue or warm pla to put in place. might need some basement slight inclination to work perfectly depending on the quality of the print. best print placement see picture with exploded sections
Got tired of my wife's drink packet boxes banging around in the pantry -
Gridfinity Bolt Sorter modification for more Bolds (tested M4 M5 M6)
Coin sorter for czech crowns. Throw single coins into the input funnel and look for the result. Each coin falls down to the separate storage, depending on its value. Sorter recognises Czech crown coins 1CZK, 2CZK, 5CZK, 10CZK, 20CZK,…
Print both the letter sorter and the optional TPU foot pads in the orientation downloaded in. The pads are technically different so you'll need 2 of each, but 4 of the same would still functionally work.
This is a sorter set for the IKEA RÅSKOG rolling shelf. https://www.ikea.com/de/de/p/raskog-servierwagen-weiss-20382932/ The boxes have niches for the fingers to make it easier to pull them out. Alternatively the “s” version do not have…
A set of sorting trays designed to separate beads and ball bearings sized from 2mm to 6mm in size. Untested; print in PLA at 0.2mm with 20% infill. Post a make and give me feedback so I can make the model better! UPDATE: still untested,…
First of all, I hate sorting anything. I found using a sorter that has the lines was difficult for me to read through my bifocals. This sorter will take care of 95% of my needs with a max length of 30mm. I hope you find it useful.
Printed from PLA See image for print orientation (no supports needed) No glue or fasteners required (snaps in place) Drop the coin at the top of the ramp
automatic coin sorter for polish zloty!
I added a negative volume to the M3 sorter to allow for the larger M4 heads. Still seems to work well! YMMV…
I liked andy_burke's idea for a coin holder, but when I printed a test print some coins fit and some didn't. So I thought it would be easier to just redesign my own one from scratch in Fusion 360. I decided to add a lid so that you could…
I was looking for a locking mechanism to keep the IKEA SORTERA lid in place. I found TurboJonte design but then I realised it was for the front part of the lid, I wanted something for the back part. Note: The front has a different angle…
better remixed version, no hangs or skips
Ever need to find a specific screw from your screw drawer? Or find that one specific lego from your bag of legos? This tray is made for situations just like that! Just dump the pieces you need to sort into this large tray so you can see…
First of all, thank you for downloading my model :D Dimensions: Gridfinity 4x1 (168x42mm) Coins (all): 1¢ 2¢ 5¢ 10¢ 20¢ 50¢ 1€ 2€ Attribution: Zack Freedman YT channel. Gridfinity video . Print settings: Speed: any (depends on printer)…
This is a replacement top for the M3 bolt sorter. It's a great design, but was missing a 14mm hole so would mean I kept having to double check the 16mm collector. In the absence of a step file, I've tried to keep this as true to the…
Original Model Summary 100% printable euro coin sorting machine. No screws, nuts or other parts not printed. You can use it to order coins or count the change in coins if you apply a scale. No jamming and good working speed.…
Modular pipette tip sorter for P10, P20-P200 and P1000 SARSTEDT tips. Tested tip boxes: P10: Axygen Biosphere Fisherbrand VWR P20-P200: Biosphere Fisherbrand SARSTEDT VWR P1000: Biosphere
I accidentally deleted the other listing when I went to edit it >.< Arduino Code: https://app.arduino.cc/sketches/667b9aaf-c7f0-41d5-893e-bff4c8cc529d?view-mode=preview I thought this would be a fun project as the only other time IR…
Make your sorting of Perler beads easier than ever. The separator allows you to divide the tray into two compartments. Current orientation is the recommended one.
An automatic coin sorter for many currencies. See also http://youtu.be/7F2fIF9PNBk for a short demo video.
This spoke nipple sorter tray is a quick way to align, pick up, and store spoke nipples for wheel building. The tray has tapered slots to quickly align nipples dumped in from a bulk container.
Requires the m3Sorter_bottom.stl from https://www.printables.com/model/874548-amazing-gridfinity-m3-bolt-sorter/files DO NOT USE THE GRIDFINITY BOTTOM - IT IS NOT COMPATIBLE Model image taken from a make - not mine
This is my home-made coin sorter! This sorts all of your pennies, nickels, dimes, and quarters so you can finally make use of that coin filled jar you have ;). It is for US currency only (unless your currency has the exact same sizing).…
All credit for this design goes to @EricAnastas_578679 , I've only made minor modifications to an already-excellent model.
Made this in light of the original reason this system was created. to get rid of the cheap crappy containers you get your screws in! Paired with the screw sorter from the link below, you're bound to enjoy using this system….. even if you…
This is a screw sorting machine. It's a sieve. You can change the width of the gaps between the bars to choose what the largest screw that stays in the hopper is. It only requires 7x 608 bearings and 8 120x8 mm aluminium rod to build.…
Baby shape sorter with five basic types. It develops the child's cognitive skills and at least temporarily entertains inquisitive children :D Easy to print Printing Material: PLA or PETG Layer: 0.2mm Infill: 15%
Remix of https://www.thingiverse.com/thing:4759877 , what is a remix of https://www.thingiverse.com/thing:4695864 Just needed the smaller ones, so i edited it. NEW! ---- ---- ---- Made a new version as remix for printing in under 1h:…
VERSION 2 NOW AVAILABLE! A fun print that sorts your AA and AAA batteries. Drop them in the funnel and watch them enter their proper slots based on length! Two internal ramps allow AA batteries to roll over into the far slot, while AAA…
The Sorter is für 2,1,0.5,0.2,0.1,0.05 Euro Coins. Its functioned easy.
I had a lot of unorganized screws, one time I've stumbled upon this type of sorter. I couln't find it anywhere(17.05), so I've modeled my own. I highly recomend printing it on smooth plate!
I modified the already excellent original so both batteries come out at the same side. I also made the connecting pins a bit more sturdy and changed the front so the batteries are easier to take out. When printing, the main parts need to…
This storage holds 12 different resistors, so you can store one complete E12 series. This is a customized version of my Customizable Storage Box with Drawers to show off one of the use cases of this Customizer. Instructions Using the…
this is the ultimate seed holder holds up to 39 boxes per tray one of my faforite creations !!!! update added a smaller version for the mk3 machines that holds up to 21 boxes
Edit: added version with rise text so you can dual colour print the numbers on A 3d Printed Fret Sorter, when you cut frets for a guitar neck they will be slightly different lengths. place them in order in the numbered holes. Will fit…
A 10-slot angled rack for quickly sorting Magic and other TCG cards (63x88mm).
I designed this mail sorter to keep incoming mail organized. Here are some ideas on how you can use each slot of this versatile organizer: One per mail recipient Coupons & catalogs Junk mail or read mail to be shredded Outgoing mail Mail…
Source File available https://cad.onshape.com/documents/020fa78cdb4bd31437287ea9/v/11a678e5a4a28bbc66dad17e/e/6afdce6ade2869a5bee4ac25?configuration=List_byYdtnejsYAES6%3DMX&renderMode=0&uiState=69188d63bcdba092b7d63574
Quick Bolt Sorter - M2, M3, M4, M5
Gridfinity based sorter for US coins. Model includes slots for 44 quarters (4 per slot), 45 nickels (5 per slot), 140 pennies (10 per slot), and 70 dimes (10 per slot). Bin is 3x3x2 with magnet holes in the base. Model contains raised…
Do you know that problem: Your whole developer table is a mess and you have no reliable sorting system for your Dupont jumper cables you always need in every arduino or raspberry project. This is why we had a look at the different types…
Set up your coin sorter the way you want! Below you will find the order to arrange the coin sorter from the lowest (1cts) to the top (50cts). You can choose the type of coins you want to sort easily : red or yellow. And if you want them…
These are part bins I designed for use in Raaco Assorter 55 assorter boxes, but are likely easily adaptable for other variants by Raaco. Feature highlights: Available in full and fractional sizes. ⅔ wide bin is especially useful for small…
Just put the coins in and it sorts them
I designed this stackable US coin sorter to be simple to print and small enough so that all parts can fit on a Prusa mk3/4 build plate and be printed at once.
Info on the bolt sorter, and links to other screens, can be found here. A 'screen' for M3 button head and socket head fasteners. Each screen prints in about an hour on my settings, with no supports, brims, etc. needed. I printed mine from…
Skadis M3 bolt sorter
I have been using Raaco Handyboxes for component storage and transport, and find a lot of space in them is wasted as I do not have enough of the small inserts, and also the smallest ones could have more compartments to save even more…
