413 modeli
Introducing the inspiring 3D model of the "Inverted Spear of Heaven," the legendary weapon wielded by the formidable warrior Toji Fushiguru. Crafted with unparalleled attention to detail, this digital masterpiece brings to life every…
Decided to try my luck at designing an Emergency Spear Point. Based on the Marbles Spear Points, but really made as a Last Ditch Option. Printed them in PETG but harder materials are a better option I may upload a Snap-card Option in the…
Description This is the spear carried by soldier Sunfire Elves in the Netflix show The Dragon Prince. About This model is big, unless you have a big printer you may need to print it in multiple pieces. I already cut, added pins to connect…
it is used to attract fish by throwing it into the water, it will flow while reflecting light which creates flashes imitating an injured fish or other. It is mainly used to attract predators. It must be covered with aluminum or adhesive…
staffa fucile sub salvimar predathor con scanalatura che si incastra sul fissaggio mulinello originale così da non ruotare per il peso della cam. Riempimento al 15% per avere un minimo di galleggiabilità per il peso della cam. Smussato…
This collapsing Spear is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
32mm scale Goblin miniature for tabletop gaming. Tips, donations or patronage is greatly appreciated ❤️
A frogman. Somebody forgot to drain the swamp and now it strikes back with pointy sticks. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
A hobgoblin or any other big goblinoid with a pole weapon. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and…
Elite Saracen Spearman. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The mounted spearman…
It is oft required for the Legions of Rome to deploy their hastati and Principe in a rapid platform that can also lay down substansial fire support. Enter the Kimera Armoured Transport. Equipped with a hull mounted auto grenade launched,…
I make this model in three parts. I plan on using a broom handle for the handle of the prop, so I used the diameter of one I had on hand. There is a tab on the head and neck of the model that will help with aligning it right. I hope to…
Orc looter with spear Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The orc shaman seen in…
A hobgoblin or any other big goblinoid with a pole weapon. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and…
I've been selling this on Esty for a bit now, and if you cant be bothered to buy 5 filaments for more than the sword, you can do so, but if you want to buy it for a fairly reasonable price (stand included) its about £25.…
A bandit with spear. Could be a soldier, too. Or a mercenary. Or a deserter. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants…
Description : The Inverted Spear of Heaven is a dagger with a jitte-shaped blade. It has a «q» shaped circular hand guard that points out on the side of the longer blade. Additionally, the weapon has a black handle with a circular link at…
a spear for dummy 13 it is about 6 inches long the handle is from dummy 13 staff the spearhead is my own design
Should fit most broom threads, maybe plungers as well. Test file included. Print upright no supports. Bed slingers might want a brim.
"It is my solemn and important duty to bring happiness , light , and joy into your world when you're being a dour idiot." - Sylphrena, from Oathbringer, by Brandon Sanderson I based this model on the Dragonsteel “Forged Foam” models to…
This is a digital 3D printable model of Mandalorian Beskar Spear . The download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into smaller pieces (OBJ). All cut parts are placed…
Mortal Kombat X's (2015) version of Scorpion's spear/kunai.
This 3D-printed spear is expertly designed to fit perfectly into the hand of your Dummy 13 figure, adding a powerful and dynamic element to your collection. The spear’s precise scaling ensures a secure grip, making it ideal for action…
Didnt find spear, make it on my own
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
This Shakespeare globe theatre was initially made as an English assignment. I made it in Blender and also made some renders with it. Ironically, this was made nearly a year ago, but I finally got around to uploading it. :) Here's a small…
A designful pot inspired by the structure of gothic cone spears. Perfect for your medieval house plants! Print information: Recommended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Jujitsu Kaisen Inverted Spear Of Heaven. Print And Assemble Easily
I basically made this for pulling cables behind walls or above ceilings (original ethernet plug was from Dead End - Ethernet protector by SarahAlroe). You can stick a wire or piece of string through the loop and pull it through, hopefully…
This is my take on how the LEGO Group would create a Spear element! If you end up printing this, I would recommend that you print the Spear upright on the build plate for the best print quality.
Part of a FREE 3D-printable miniatures project you can find at https://www.patreon.com/DungeonWardenMiniatures Your support is vital to the survival of this project. Thank you :) FDM-compatible (the smaller the nozzle, the better the…
I threw this together rather quickly, so it's not great.
This is a sculpture of an ancient Greek soldier holding a shield and wielding a spear. Made to be dynamic and eye catching. Would look nice on a desktop or as shelving decor. Printed solid but can be hollowed. Printed with supports and…
Part of a FREE 3D-printable miniatures project you can find at https://www.patreon.com/DungeonWardenMiniatures Your support is vital to the survival of this project. Thank you :) FDM-compatible (the smaller the nozzle, the better the…
This model is compatible with the lego system.
Designed this up after rewatching Jujutsu Kaisen, takes a 1/2 in dowl through it. split for easier painting/printing. Category: Props
Toji Fushiguro's Inverted Spear of Heaven for the Dummy 13 Model Scaled to a standard D13 Model (100%). Prints in two parts. No supports needed. All my other Dummy 13 models can be found here .
A middle-eastern spearman from the Scorpio clan. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases.…
TO ANYONE WHO DOWNLOADED THE MODEL BEFORE THIS EDIT, THERE WAS AN ERROR IN SOME PARTS, SO MAKE SURE TO REDOWNLOAD THEM, IT IS 100% FIXED. (very late ago, like two months ago) ANOTHER ISSUE HAD OCCURED, I SOMEHOW DIDN'T EXPORT TWO OF THE…
Designed this up after watching Jujutsu Kaisen, takes a 1/2 in dowl through it. split for easier painting/printing. Category: Props
UPDATE: I made a version that supports an aluminum rod! This version uses a ½" aluminum rod that is 56" long. I recommend taking a 6ft aluminum rod and cutting it down. The parts are all assembled the same way as the original with the…
Modeled myself from the offical setting informations. I found out the original design, one site of the knife should be broked, so modeled my version of this knife. Arround 40cm total lengh, revised the handle for better holding feeling.
Modeled this up for fun. takes a few pieces of 1/2 in dowel. will probably need gluing and sanding. Measures a total of 20 inches long and is split up, also has a removable mag and ammo. Category: Props
Detailed Greek solider holding a spear. Set to be printed solid, but can be hollowed. Supports are advisable. Enjoy... Note: Take a little extra time ensuring supports are in place (I'd suggest manually adding a few) around the right arm…
This is a model that I made for a ≈16mm dowel for cosplaying. It looks somewhat historically accurate in my opinion and I hope you enjoy it. (note tip is sharp and might break off so be careful)
Looking for a viking spear, but not wanting to deal with glue or non-printed wood poles? Search no further :) All elements printed with 20% infill and no supports. Using a raft to print the spear tip may also be helpful. Tighten each of…
When Ogg (my YouTube caveman muppet ) dresses to impress, he feels naked without his trusty spear at his side. But where is a caveman awakened in the modern world going to find a spear? He's going to 3D print one, of course. But he's also…
A points tracker for Age of Sigmar Spearhead. Points broken down into victory points and battle tactics. Fits 16mm dice. Printed with Polymaker marble PLA with ironing.
This model is compatible with the lego system.
statue of Athena, goddess of wisdom with spear and shield
Recovered from the Lendbreen icepatch southern Norway in 1974, this spear was so well preserved that it's discoverer, Per Dagsgard of Norway, was able to use its shaft as a walking stick! Believed to date all the way back to the 8th…
Part of a FREE 3D-printable miniatures project you can find at https://www.patreon.com/DungeonWardenMiniatures Your support is vital to the survival of this project. Thank you :) FDM-compatible (the smaller the nozzle, the better the…
A friend of mine wanted a spear for a Percy Jackson cosplay, however, all the files were either the wrong design, or actual weapons, and would never pass weapons check. I designed this to be to the best of my ability to pass weapon check…
ASW-G-08 Gundam Barbatos Mace Spear This is a cosplay model of the Gundam Barbatos spear mace thingy from season 1. I tried to model this full scale but that made no sense in terms of making it actually usable in terms of a cosplay…
A 3d model of Leonidas' Spear from the Assassin's Creed series.
This model is compatible with the lego system.
this is my first model let me hear what you think guys
This printable spear topper transforms an ordinary wooden pencil into a miniature medieval spear. It is perfect for desks, pencil cups, classrooms, gaming tables, or anyone assembling a tiny armory of writing implements. The topper is…
A model of a stage used for plays. Made for a Grade 9 English project related to Twelfth Night; a play by William Shakespeare. Was originally used to create a 3D maquette of one of the scenes in the play using LEGO characters and an MP3…
We needed to stake a broomstick handle into the ground for a signpost we were making. For best results, print it ON ITS SIDE with some support. It will want to break apart if printed "pointy side up". For more about the signpost:…
Generic Medieval Spearmen for 1:72 wargaming 2020-04-15: Included both normal and long spears Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 mm Filament: Creality PLA Category:…
Gungnir , the spear of the god Odin . In Norse mythology Gungnir translates to "swaying one" which has possible relation to another obscure Danish verb Gungre which means to tremble. A symbol of authority forged from tough Asgardian metal…
Speargun mount for GoPro. The design fits a 28mm barrel and attaches with three sets of bolts and nuts. The following is needed for assembly: 3x M4x20mm Umbraco bolt (or similar with a head size less than Ø7) 3x M4 nut.
A fast-to-print Spear and Halberd Rack for fantasy tabletop games. You can print several, paint them all at once, and have them ready for your game in no time. Perfect for adding detail to bandit camps, military outposts, barracks, or any…
All prints are oriented for best placement. I used PETG but any filament should work. I used a .3 layer height but again you can print in finer detail if desired. Happy printing!
Part of a FREE 3D-printable miniatures project you can find at https://www.patreon.com/DungeonWardenMiniatures Your support is vital to the survival of this project. Thank you :) FDM-compatible (the smaller the nozzle, the better the…
A timeless tribute to the greatest playwright in history. This stylized bust captures Shakespeare’s iconic ruffled collar, thoughtful gaze, and poetic aura—ideal for fans of literature, theater, and Renaissance charm.
For my son's "Historical Halloween" annual school event (this year's theme was Europe), my son chose to be Odin, the father of the Norse gods. This is one of his costume props, safe for school, with no sharp points or edges. Most people…
This model of a spear head is in two parts that glue together. The socket threads onto a mop handle or paint roller extension that has ¾" (19 mm) thread. Then glue the spear point into the slot. The threads on mop handles are often not…
Spearfishing Speargun Reel The original model was super vague on assembly instructions and the mount didn’t fit my gun. You can’t resize it because then it wouldn’t mount to the rest of the reel. My mount uses just two zip ties and mounts…
A points tracker for Age of Sigmar Spearhead. Points broken down into victory points, battle tactics, and points from twists. Fits 16mm dice.
Prints in two parts, where they can be glued together. I screwed on the bottom part upside down on the PVC Riser first, then applied superglue around the rim and screwed down the top part. I kept the screwing motion going while the glue…
The files leverage shipping tubes in order to create the main body of the thunders pears this allows for a very light weight but structurally sturdy prop. I have a video tutorial that explains how to assemble the thunder spears. The video…
This is a muzzle modification I made to make my closed muzzle Salvimar speargun into an open muzzle speargun.
Dragonborn Paladin miniature for tabletop RPGs. Equipped with dragon-themed spear and shield. Create custom, print-ready miniatures at [** Miniature-Maker.com **]( https://miniature-maker.com ). Generate unique characters in minutes for…
Just a quick HairPin I made for my metallic silk PLA!!!
Enjoy my work? Find my full collection over on Patreon or You can buy me a coffee! The Spartans were a group of historical figures who revolved around war and idolized warriors. Even though many of Sparta's ideologies are misunderstood…
Printed in ABS at like 20% gyroid infill with 2 or 3 perimeters and it feels pretty strong
A spearhead that can be used for cosplay and costumes and such!
The Blade is smooth by default but can easily be made textured with fuzzy skin slicing. There is a hole for 6 mm wooden/metal rod for extra stability. End part has a holed version for screw eye and a ring for easy attachment of chain.…
Toji's main weapon when facing off opponents.
Need to get a network cable from A to B? Already got something in position you can attach to and pull through? This might be for you. This design prioritises strength at the pulling end, without requiring bridging, supports or challenging…
Infill- at least 20% Brims- as needed Supports- none Filament- any First layer print speed- 10mm/sec
My son loves to play Asterix and wanted a roman spear as a toy. So I printed a spearhead modeled after the ones in the comic books. The shaft is tapered from 20mm to 18mm, we simply rolled up some card board to form the body of the spear.…
This is a “spear" gun for playing in the pool. It shoots PVC pipe “spears”. I printed the spear tips in TPU to minimize the chances of injury. (I have 4 kids who will likely shoot each other.) I wanted a way to shoot my pool torpedos, but…
📝 William Shakespeare – Bust This bust represents William Shakespeare , widely regarded as one of the greatest writers in the history of literature and the most influential playwright in the English language. The model is inspired by his…
Fans of the hit manga/anime “Jujutsu-Kaisen” will recognize the devastating Inverted Spear of Heaven . This was a special request for a family member who plans to use it for cosplay during the next major convention. As a one-off, I…
Vhorlath Realms – Season I The Ironfang Spearbreaker is an Orc frontline warrior armed for the brutal press of battle. With his spear held ready and his savage presence fixed on the enemy line, he is built to stand among raiders,…
12cm vysoký William Shakespeare
This model is for a throw flasher holder for spear fishing. Internal diameter 20.5mm, sized to fit standard 20mm PVC tube with vinyl wrap. Designed to fit 50mm wide, 4mm thick dive belts.
Scalable, needs supports. Perfect for tabletop gaming. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Clicker for arbalete. Attract fish using the click sound underwater. Category: Hobby
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
![Broomstick Spearhead [Kenteclaat Remix] (Modified threads)](https://media.printables.com/media/prints/586177/images/4677532_d3bc5908-5c4f-4b0a-b09f-c545092056fc/pxl_20230915_022558869mp.jpg)
