158 modeli
Used this model as a reference when making a case to hold my SwitchBot button pusher like this one: https://www.printables.com/model/681036-switchbot-button-pusher-case-for-liftmaster-811lm-
Switchbot Hub 2 wall mount. The hub 2 is nice, but because of its shape with the cable I never knew where to put it until I had the idea of hanging it on the wall. I couldn't find a wall mount so I made my own. Update: I improved the…
The switchbot keypad touch will be very comfortable. However, you can tell at a glance that it uses Switchbot from its appearance. By attaching this cover, it is difficult to understand that it is a switch bot at first glance.
This adaptor makes it possible to attach your Switchbot Lock pro with screws, even with a short Locking cylinder. I didn't want to trust the solution with the double-sided adhesive tape alone. So I created this adaptor. It is screwed and…
I made an extension for my Switchbot because he could not always switch my coffeemaschine on. Now it works, i just glued it in with a tiny bit of plastic glue. I added some other Extensions to the files, I made them for different use with…
Here's a super-simple mounting solution to hang your outdoor hygro/thermometer with a single screw. I've had one mounted outdoors for several months with no issues. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: No…
The included lock adapters are 24mm tall. If your lock raises well above the door surface you want a short adapter so the Switchbot can be mounted closer to the door. This adapter is 17mm tall and includes a 4mm slot.
Wandhalterung kann mit 2x 3mm Senkkopfschrauben einfach befestigt werden. Ich habe beim Druck organic Support verwendet. Geht aber auch ohne, dann sind die Bögen auf der Unterseite bisschen unsauber, aber nicht schlimm. Wall bracket can…
My switchbot keypad touch is attached outdoor to the garage door, unfortunately the fingerprint sensor doesn't work if it gets wet, for example due to rain. This cover protects the sensor from rain and other weather influences. A bolt is…
This holder / adapter will position a SwitchBot Bot on to a Flair58's power control without the need to use the 3M sticker or any additional adhesive The holder / adapter slips on by disconnecting the power cable and is friction fit. I…
I wanted to avoid my door lock "hanging in the air" to ensure a stable connection.
Printed at 0.2mm layer height. Nozzle 0.4mm. No supports needed. But brim helpful since it is thin. Bracket in photos was printed in white PLA. The source is here at Onshape if you would like to make a remix with source.
I wanted to add a smart lock to my sliding door. This one the only one I could get to work. Just needed to print 1 part. I used the Switchbot Lock and printed this piece that slides onto the XXL size adapter that come with the lock.
I bought the Switchbot Lock pro hoping it would fit a Swiss SEA Lock, but there was no adapter. Here you go. I printed it in Matte Black PETG Pusement with no supports and it looks just like the original and fits like a glove. Update. I…
Die Halterung wird seitlich an den Türöffner geklebt zum Beispiel mit einem TESA Powerstrip. Der Schieber ist gedacht damit der SwichBot einfach von Hand bei bedarf von Schaltpunkt entfernt werden kann. INFO: Der SwitchBot kann entwerder…
I didn't like the idea of mounting the SwitchBot Remote with the supplied velcro so I created this sleeve
HSW mount for the Switchbot hub. Print settings: Layer Height: 0.20 Perimeters: 3 Infill: 10% No supports needed.
Neue Version für die einfache Entnahme eines SwitchBot Matter Realais zur Halterung auf eine DIN Hutschiene Version 2.0 (mit Herausnahmewerkzeug) SiwtchBot DIN-Halterung für: SwitchBot Relaiy Switch 1 SwitchBot Relaiy Switch 1PM In dieser…
I really like the SwitchBot outdoor temperature and humidity sensor as it is, but I don’t have any shaded area to place mine. As a result, direct sunlight affects the readings and makes it unreliable. To solve this, I designed a simple…
This is a custom adapter plate for the SwitchBot WiFi Smart Lock Ultra, designed specifically for a Euro cylinder lock. The central hole fits the cylinder, while the side holes and upper posts align with the SwitchBot Lock Ultra to keep…
The Switchbot Outdoor thermometer comes with a lace and some double-sided tape. I did not trust the double-sided tape to hold for more than six months outside. So I quickly designed this holder. The head of the screw can be 7.4mm or…
You can use as alternative of original model, if you want use also keyboard and see LED indicators.
Buy them here if you can't print them yourself! The Switchbot tilt says its not compatible with valances. Turns out its just because of the valance clips. I created an extended version that pushes the valence away from the blinds and it…
After the switchbot arm broke I recreated it with fusion 360, best print ASA or ABS
Attach a SwitchBot Contact Sensor to your Garage door with the use of these 2 brackets.
Mount for SwitchBot Hub 2 using the T-Clip System
This is a 3D model of the original mounting bracket for the SwitchBot Pan/Tilt Camera, identical to the one included in the box. The design replicates the stock bracket without modifications, providing a replacement part for those who may…
This is a thin adapter to install switch bot lock smarter than the factory adapter. Test well before use.
SwitchBot Lock Pro lacks an adapter for the common danish Ruko lock pin in a cylindrical lock with a knob. I created this one with the original measurements of the included adapters, but with the slot for all of us in Denmark that are…
I've made custom mounting plate for Switchbot Keypad Touch You can mount it to wall with tape or with screws. Locking mechanism work, you have to put sim card removal on bottom of keypad to remove it from the mount, but you have to remove…
Supporto a muro SwitchBot Meter
It's a snug fit, but not too snug. It can be printed with or without supports but the bridging will make the fit a little bit tighter. The cutout at the bottom is just to get a better grip, but you'll probably need to tap it a few times…
Soporte y Gancho para colocar el Termohigrómetro de SwitchBot en un Skadis de Ikea. Support and Hook to place the SwitchBot Thermohygrometer on an Ikea Skadis.…
simple slot everything together and secure with the the M3x60 bolts. Parts to print: Top x1 Intermediate screen x2 base x1 mounting bracket x1 Print Settings: Filament - PETG (or other UV resistant filament) Layer height - 0.3 Support -…
Switchbot Lock Pro mount plate make with 10,5mm depth from doors create for upper door plate with 95mm screw spacing. Mounted with original door plate screws.
I have bought a new SwitchBot Lock Ultra, but due to my door design I wasn’t able to place the magnet correctly. So I designed this quick riser to get it to the right height. Maybe it will help someone else :D It’s very specific, but who…
Holder for switchbot used to put on a mac mini Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Category: Computer
This collection of Multiboard fittings keeps your Switchboard S10 accessories tidy and ready for action! Includes K10+ Mop Holder S10 & K10+ Spinner Holder S10 & K10+ Cleaning Brush Holder S10 & K10+ Mop & Dust Bag Holder Requirements…
Outdoor thermometer SwitchBot Indoor/Outdoor Thermo-Hygrometer sensor, stevenson screen
Switchbot Key Pad cover that cannot be removed once the Key Pad has been installed. To be able to remove the Key Pad again, there is a hole on the underside so that the assembly lock can be unlocked. The front of the cover is designed…
EN: NEW VERSION - More resistant - PETG Print The Switch Lock Pro Winkhaus adapter provided in the box does not fit the N-tra cylinder. This adapter is designed to work perfectly. No support required. FR: NOUVELLE VERSION - Plus…
Safely wall mount SwitchBot Hub Mini and Hub Mini Matter Enabled hubs using command strips. Includes version with two holes 40mm apart. Print as pictured. No supports needed. 5 perimeters gets a nice slot peg top.
This “foot” for the switchbot smartlock allows it to be placed in the correct position to turn the mortise deadbolt despite the door hardware making fitting a traditional deadbolt type smartlock difficult. Its basically a square with a…
MyQ decided to change their API to block people from controlling their garage and gate openers with any 3rd party apps. This broke my ability to open my gate through HomeKit or anything other than the MyQ app which tends to not work very…
A power adapter for the SwitchBot Bot that allows it to be powered from a wall outlet. Requirements Lug terminal Two M3x6 bolt and nut sets 2.1mm panel-mount DC jack Wiring / Wires 3.3V AC Adapter SwitchBot Botの電源をコンセントから供給するためのアダプタ…
Prefer a rather flexible material like PETG. Simply slide from the side of the column to align its parts. Once the lock set up, pull the strip to remove.
Ce projet est un SwitchBot Bot , un petit boitier qui contient un bras robotisé capable d’appuyer physiquement sur un bouton. Il permet de rendre compatibles avec la domotique Matter des appareils qui ne le sont pas à l’origine. L’idée :…
This is a mount for the SwitchBot temperature/humidity meter. I designed it to go inside my filament dryboxes (based on this project ). It attaches to the drybox with a simple M5 bolt and the meter friction fits inside the mount.
For those who has Switchbot Lock Pro and want to install it on Wilka 1405 lock cylinder with round knob, original knob you can remove simply by pushing out metal rod from center, next just put adapter and lock it with original rod.
This model is shaped specifically for my handle, which is a noname low-end one. The 195mm size is however standardized (at least in Europe). Remix the model preserving the screw holes and front plate position, adjust the back for your…
You can print from any material, no supports. Attach it to magnet with small piece of 3M adhesive tape from back side of magnet.
Ein einfacher Standfuß für den Switchbot Outdoor Meter. A simple stand for the Switchbot Outdoor Meter.
Since the standard wand size of swedish blinds, 4 mm, are way thinner than what the Switchbot Blind Tilt supports, I made a simple adapter. Print 2 of the adapters, wrap some thin double sided tape on the wand, and put the adapters in the…
Mount intended to give you more room to attach the switchbot blind motors. You'll want to use gorilla tape or some other double sided tape on the back of the mount to stick it to your blinds along with another small strip to attach the…
SwitchBot Lock thumb turn adapter shorter than the one offered in the kit Print Settings Printer brand: Prusa Printer: I3 MK3S+ Rafts: Doesn't Matter Supports: Yes Infill: 20% 0,2mm
This case is only for the thermo-hygrometer 'SwitchBot MeterTH S1'(Amazon's best seller). It can be used in bathrooms and other places where some water drops may occur. Attach the case to the ceiling by inner magnet or double-sided tape.…
A solution to attach a Switchbot to a Busch Jäger Light Switch.
The switchbot lock supports nightlatches, however doesn't work well if the rotation is less than 90 degrees. As such, I made this mount to fit over the pictured Yale lock, and allow the Switchbot to mount where it requires around 40…
Based on the Model from SirPrintsALot, I developed an adapter for the KABA EVOLO door knob.
This is a mounting for the Water Leak Sensor from Switch Bot, it works with and without the sensor cable. To mount the Mount, you just simply use the pregiven tape from Switch Bot to the back of the mount and glue it to your surface!
Sometimes it is simply necessary to increase the mounting angle of the Switchbot Keypad Vision. Especially in narrow entrances, mounting in the reveal is necessary, but this results in a poor angle for the keypad. With my adapters, you…
Dimensions are a little wonky, but so far, so good; it fits well, and even without the screws, the plate was able to hold the lock. I added a bunch of 3M tape to the underside and stuck it well to the door. I included a couple of…
I use the SwitchBot smart hygrometer and thermometer in all of my filament dryers because it has a much more accurate hygrometer sensor good from 0-99% RH +/- 2%. This unit also has the ability for remote monitoring with either bluetooth…
Adapter Plate for Switchbot Lock Pro The lock wont fit because the locking cylinder was to long. This adapter closes the gap between and it will have a good fitment to the door
The chamberlain WiFi garage door opener phone app has not so great reviews (it show advertisements). The SwitchBot button clicker works as an alternative that is more reliable. Also one less app on the phone and wifi device Printing with…
I designed a bracket / clip for the SwitchBot IP65 Indoor Outdoor Wireless Hygrometer Thermometer
You will need an M3x16 screw minimum, and Skadis T-Nut M3 . Very simple install just add the Switchbot Wall mount adapter included in the box (needs to be unscrewed from the stand) and line it up with this mount, then you can use an M3x16…
Adapter für SwitchtBot Cam auf GoPro Halterung. Der Adapter wird einfach an die Platte geschraubt, die bei der Cam dabei ist. Done. Jetzt gibt es keine Grenzen mehr. Zur Komplettierung werden benötigt: 2x M3x10mm Schauben 2x passende…
The wand adapters that came with the switchbot blind tilt is too large to fit the wand on my blinds and the mounting position of the device itself didn't work so i had to design my own version. Wand adapter This adapter replaces the…
SwitchBot Indoor/Outdoor Thermo-Hygrometer holder.
This housing lets you attach a SwitchBot Bot to the cable light switch of a Tom Dixon Bell light in order to control it from home automation systems like Apple HomeKit. The lower part is pretty specific to that particular light switch,…
This panel let's you mount the SwitchBot hub to the Blinkinlabs' mini rack .
a adaptor for the switchbot doorlock.
I used 2 colors to match the leg to a trim color and the cable orginizer to the solar panel. The best print orientation for easy assembly is in a picture. FreeCAD file is also available if you want to modify anything.
Switchbot Lock Pro magnetic battery cover replacement. Blends in almost perfectly. Requires two 3mm thick 3mm diameter neodymium magnets to keep attached (similar to original one). Check magnet orientation before pushing in. I printed it…
Comodo supporto per appendere lo switchbot plus con del biadesivo, l'ho realizzato per appenderlo sul camper, il termometro calza perfettamente all'interno ed è molto utile quando si ha la necessità di rimuovere lo switchbot plus per il…
Printed in PLA+ 0.2 Layerhight 15% infill Original cable will fit perfectly, it need some force to insert but it needs to sit tight that it won't get pushed out when plug in the battery
This model is to be a slide in on the plate shown on the photo in order to provide good grip for the lock without a need to use glue
Switchbot didn't want to give me a mounting plate because I bought it used, which effectively made the lock useless, so I decided to print one instead! Printed with PC-CF. However, even though I printed with PC-CF, the sides that get…
I use the SwitchBot smart hygrometer and thermometer in all of my filament dryers because it has a much more accurate hygrometer sensor good from 0-99% RH +/- 2%. This unit also has the ability for remote monitoring with either bluetooth…
Adapter for SwitchBot Lock Pro deadbolt design.
As there are no affordable mounting plates or smart locks available for multipoint doors, I designed a mounting bracket for the Switch Bot Lock Pro. Since we are renting, this can be easily removed without causing any damage. You need to…
English Description I had a very specific problem. I replaced the ceiling lights in my Japanese house with SwitchBot ceiling lights ( https://www.switchbot.jp/products/switchbot-ceiling-light ). However, as all smart light users know, I…
Made space for Wire to go UP on the back side.
A DIN rail mount for a Switchbot Relay. You will need to print a tab for the bracket. It can be found at: https://www.thingiverse.com/thing:3401942 or https://www.prusaprinters.org/prints/8512-din-rail-mounting-tab It can be found at:…
There isn't a flat spot large enough to mount the Switchbot Bot, so this fills the radius and allows secure mounting. Glue or double sided tape the mount to the fan.
Print upright, no support. As the original, Fusion project file is available for you to play with.
The curtain bot from Switchbot was unable to overcome the friction between Grommet on curtain and the rod, while opening the curtain. This adapter reduces the friction by slightly modifying the angle and reducing the friction. Attaching…
Print on its side. No support needed. Fix with double-sided tape, like the official mount. Update 2024-04: replaced with a screw-attached one because the sun heated my door and the double-sided tape glue melted. Take a look at my 3D models.
For the mini-pc, it is so difficult to keep the switchbot attached. I made this to keep it on. This will allow you to turn on/off using switchbot. Short Version need some additional support. Long version can stay on.
These make sure the small rollers stay properly aligned inside the rail in order to prevent them jamming. Clip one of them to each metal arm of the SwitchBot, taking care to orient them correctly so they clear the rollers.
The Switchbot Lock Pro Adaptor is designed to seamlessly integrate with a single deadbolt mechanism, allowing users to enhance their current locking system. The Switchbot Lock Pro does not provide single deadbolt adaptor in certain…
Switchbot Lock Deadlatch Attachment
Printend with the gap facing down, used tiny tree supports only on the rounded tips.
The stock mounts in the package are designed for the case when top blinds bar is NOT COVERED. The only way to install them using stock ones was to stick to the cover which is not well fixed. Such solution turned out to be a temporal…
This is a wall-mounted L-shaped bracket specifically designed for the SwitchBot Pan/Tilt Cam Plus 3K. The mount allows the camera to be installed upside down on a wall, making it ideal for ceiling-adjacent mounting, high wall placement,…
With this cover you can lock your keypad on the wall at 45/35 degree adapter and you have an hole for touch ID and nother hole for led response.
With the holder it is possible to attach the Switchbot camera to a curtain rod with a cable tie. I attached the holder plate to the original bracket with two M2x8 screws. But you can also use almost any other small screw. Category: Camera
Infill: Min. 10% No Supports needed English: This is a holder for the HomeTec Pro remote control from Abus. Switchbots are inserted into the holder so that the remote control can be operated via the smartphone/smarthome. Finally, the…
