Television
A flat screen television.
- Pobrania
- 851
- Polubienia
- 77
- Ocena
- 5
48 modeli
At 368 metres, the Berlin TV Tower is the tallest building in Germany and the fourth tallest TV tower in Europe. The TV Tower is located in the Park am Fernsehturm in Berlin's Mitte district. In 1969, the year it was completed, it was the…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/c6jbolQ88MS My daughter wanted a Television for her princesses. I mocked up this old school T.V. after the one I still use in my classroom. I scaled it up…
I picked up playing the game again, and it has been a long while. While playing, I came across the Radiation King TV which is one of my favorite in game props. Just a lovely design. I've had this in my project book for a while so I dug…
I designed a T.V. stand for my daughters doll house. Matches the size of the Television I made for her. Print Settings Printer: flashforge creator pro Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .2 Infill: 10% Notes:…
A tiny television for mice. Best printed at around 1 1/2" screen size, 0.15mm layer height, 10% infill. (Note: for rats, scale up to 3") Print Settings Rafts: No Supports: No Resolution: 200 Infill: 10 Notes: Printed with supports but…
I recently picked up the ESP32 based OpenTherm Smart Thermostat kit from DIYLess ( https://diyless.com/product/opentherm-thermostat ) as a cheaper alternative to a brand name smart thermostat. It came with a Xiaomi Mijia Bluetooth…
This vintage television model captures the iconic look of early CRT screens with a clean, stylised design. The sculpt includes a curved display, side control panel with dials, speaker grille, and classic antenna, all arranged in a…
A model of a vintage television set with a rounded screen, dials, and classic antenna on top. Perfect as a miniature decoration, dollhouse furniture, or nostalgic collectible. Its retro design makes it a fun piece for dioramas or creative…
Made for smartphones - max 150x70x13mm - max screen 6,1" Printed without support on the right side.
Retro TV, Phone Case works with all phones with a screen size up to 6 inches Print Settings Rafts: No Supports: Doesn't Matter Custom Section Category: Gadgets
This Nintendo Switch TV Dock Stand takes you back to 1989. 📼✨ Give your Nintendo Switch the "Old School" treatment. This vintage TV-style 3d print dock stand isn’t just about the looks—it allows you play while charging and protects your…
A small charm with a loop for mounting. Best printed using resin in batches. There is usually a little spoilage in removal when you print this small. Use 1 or maybe 2 sprues per piece. Disclaimer: Please refer to the manufacturer of your…
These parts are designed to go along with the design by Allen Ruppert. ttps://internationalnewshub.blogspot.com/2016/04/how-to-build-your-diy-db4-hdtv-antenna.html This is by far one of the best TV antenna's I've ever used and can be made…
Berlin Television Tower This model is a christmas tree topper of the tv-tower in berlin. Part 3 is printed in two parts. You need to glue them together and perhaps sand it a little to fit in part 2. Part 1 and 2 should snap together. If…
Util para mando, se recomienda uso de soportes
Wandering the waste land again, I came across this thing. I'd forgotten all about and inspired by the Radiation King Television - I wanted to do one more TV. This prop is just a gorgeous design - serious respect to the artists and…
This is an easy to print television style enclosure for a 2.4" LCD or OLED, a push button and enough room for additional electronics (in my case a D1 Mini). Freely modeled after the set in the last photo. It is easy to print and can be…
This is a small retro TV that is meant to be displayed on a desk, shelf, or anywhere you please. This retro TV comes apart into the actual TV and the legs. The legs slide into the slot on the bottom of the retro T.V. I recommend using…
Made it for my brother and uploaded for everyone to use
Needed a stand for my Samsung television so the sound bar would fit under it and didn't want to follow the leg profile all the way. Therefore designed this general stand. There is a dovetail in the middle in case it's too large, just…
Haptic model for the visually impaired, based on the book " Kamil – malíř snů " by Markéta Vítková. Read more about the project on PrusaLab's blog .
This model was created as a frame for wooden tiles collaged with images and text from vintage books and graphic novels to create irreverent juxtapositions created by artist Jamie Kratz-Gullickson.
John Logie Baird’s pioneering design for television utilised a mechanical Nipkow disk and analogue electronics to encode and decode video signals. This demonstrator highlights a key effect of the spinning Nipkow disk: when rotating at a…
Support to place a TV box or a lamp as in my case when using the TV as a computer monitor. It prints easily and without supports. It is printed in PLA. Material: Pla Layer height: 0.32 Printer: kingroon kp3s
Welcome to Remotopia – The Perfect Home for Your Remotes! Tired of searching for your remote every time you want to relax? Remotopia is here to bring order to your entertainment setup! Designed and 3D-printed with precision using PLA…
Attribution: a massive rework/remix of a source file https://grabcad.com/library/retro-television . A probably-never-built TV set reminiscent of what might have been produced in the late 1950s. Print Settings Printer: AnetA8 Rafts: No…
If the world is a show and everyone is a character, Show everyone YOU'RE protagonist with this AWESOME classic television name tag!
This remix includes my modified part, along with a walkthrough of how I built my antenna. Mainly because the article linked in the original model listing is currently dead (as of 12/5/25). When I started this project, I had zero…
I put my Samsung television onto a rolling board. To avoid, that the television falls down, I fixed the stand with these printed parts. Mounted each with 2 screws. Can be printed without support structure. Probably also fits for other…
I recreated this classic cursive "Sparton" logo for Stellar Electronics ( https://stellarmasterwork.com/ ) to replace the broken one on the control door of a 1950's television he's refurbishing for a client. Total time to make: about 2…
Since I no longer need the connections and have a 9-month-old daughter who is interested in everything I have constructed a cover for the TV connection cable (Switzerland).
YOUR GRANDPARENTS WERE ASKED TO FIGHT A WORLD WAR. YOU'RE BEING ASKED TO STAY HOME AND WATCH TELEVISION. DON'T SCREW THIS ! Stay safe friends and I will see you all on the other side of this. Category: Signs & Logos
Logo na televizní přijímač Leningrad jako náhrada za poškozené. PETG -> nástřik zlatou barvou. Category: 3D Printers
Small wheel for shortening this TV antenna . It's used on campervan, but can be used anywhere. Might need a bit of modifying, because the teeth don't allow the antenna to stay paralel. Printing instructions Layers: 0,20 mm but doesn't…
Using 4 linear Softpot potentiometers from spectra symbol, a 5in Action brand CRT with a black and white video port input, an Arduino Mega 2560, a low pass filter, and a .96in OLED screen, PWM waveforms are modified with DSP effects using…
This is a small retro TV that is meant to be displayed on a desk, shelf, or anywhere you please. This retro TV comes apart into the actual TV and the legs. The legs slide into the slot on the bottom of the retro T.V. I recommend using…
Haptic model for the visually impaired, based on the book " Kamil – malíř snů " by Markéta Vítková. Read more about the project on PrusaLab's blog .