28 modeli
I have an 1833 Greek Revival House. I have missing/broken Shutter Hinges. I found "A.C.Palmer Patent 1843" on the back of one. I looked up the patent. I used a Revopoint 3D scanner to scan it. I tried several different methods to create a…
Wydruk około 2,39 €–2,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Custom Rock shaped cave with two entries for fish, shrimp or reptiles. ~25cm X ~21cm X ~14cm. Yet another textured rock cave, what can I say, my fish like them! I've included a version without holes for aquascaping or if you would prefer…
A case for the 6 column corne keyboard, with various tent (4° to 12°) and tilt (-8° to +8°) angles, as well as a flat version. Tested to fit a v2.0 Cherry PCB (pictured), although I believe it should fit a v3.0. The pictures show the 8°…
A tented keyboard wrist rest. This is designed to work nicely with my Keychron Q11 Tenting Kit . I printed in PLA. I find the hardness isn't an issue. The top isn't as smooth as I'd like, but again I find this not an issue in use. I also…
I used 2mmX3mm magnets for the case and a 1/8" drill bit to open the holes up a bit since there was some elephant's foot. Will try to fix this in the next revision. Printed at 0.16 dynamic layer height in cura on my Ender 3 S1 30% gyroid…
A tented case designed for the corne-cherry V3, that uses all the default parts that come with a standard kit while addi
These are anti-droop arms for the Modular Mounting System. For full documentation, knobs, and other parts, please refer to the original model . The joints in the original design are held purely through friction, which means they droop…
This is a tribute to my father's patented hinge, he invented in the 60s ( https://patents.google.com/patent/US3209390 ). It's only a model showing the joint mechanics and cannot be used in an actual application due to the poor mechanical…
Keychron Q11 tented bottom parts. change to 7 degrees tented keyboard. each wrist rests are optional, if you need them. M2 6mm screws 18 pcs Neodymium magnet 3mm*10mm*60mm 4 pcs (for wrist rest) rubber foot 4 pcs ( if you want to print…
M2 8mm screw 12pcs robber foot 8pcs I remade my design and reduced volume and print time. No need to remove Q11's bottom plate. they become more simple and easy assemble parts.
Tented High Profile Case for Microdox Keyboard Case files are included for left and right cases. Cases can be used with or without tenting. If you would like tenting, print the tented legs STL for approximately 20 degrees of tenting. Legs…
neodymium magnet 60*10*3mm 8pcs The magnet I bought was slightly smaller than spec and I put thin painter tape on each side to fit in square cavity. These magnets can connect with frames or Q11 directly and steady. rubber foot 24 pcs…
This is just a small remix with the mid-air holes fixed to print without supports for the 6-column tented version.
This design in based on this design and also inspired by this design. For assembly, You'll just need some 5 x M2 x 7mm screws per half and preferably a top plate and rubber feet for traction. I've uploaded with a range of tenting angled…
This is a Corne v2.5 PCB from Keebmaker (originally by foostan) https://www.adafruit.com/product/805 for the switch https://www.amazon.com/dp/B08214DJLJ for the battery I've added 10 & 15 degree tents as well. I used M2.5x10mm screws,…
I tried a few other tenting kits and mashed together the things I liked about them into a single model then made some mods. I took the general design of this model:…
Pretty straight forward model, I just took the middle layer provided by Keebio and tented it to 15 degrees. This should work for any Phoenix Edition boards. Print upside down. At this point you obviously cant use the provided screw…
rubber foot 8 pcs I redesigned wrist rest to make more comfortable. They take more filament and print time but better than before. Added 25mm depth on each parts.
This is a remix of this case . It is exactly the same but I added the holes on the inside edges to tent the case. Please look at the source case to see what other hardware is required. The holes fit an M5 screw, length depends on the…
The top part is not included, you can download it here: https://www.printables.com/model/733283-mini-microphone-extended/files
Thick wrist rest for tented split keyboards. Has 12 deg outer side tent. Tested with Sofle, Corne, TBK Mini. Best printed sideways with tree supports. Use 10mm diameter, 2-3mm height silicone anti-slip feet.
I wanted to make a Kinesis Freestyle 2, but better. Between the Keeb.io Sinc, the FR4 plate kit, and this 3D print, I've accomplished that. The pieces tent the keyboard at 15 degrees. The print just barely fits on my Ender 3 Pro (you've…
Case designed to suit a Hillside 52 keyboard. Has a space for a wrist rest and holes for adjustable tenting legs. You will need M4 and M2 heat set inserts, I use a soldering iron with tips designed for use with heat set inserts.
A custom, 10-degree tented case for Keebio's FoldKB. I wanted to make the middle portion translucent for RGB glory to shine through, so there are a few parts to print and screw together with M2 screws (16-18mm if I recall correctly). This…
bonitos ganchos para colgar cosas, estan preparados para tendedor, pero pueden valer para otras cosas. pueden imprimirse en diferentes escalas, dejo un modelo normal y otro reforzado. Print Settings Printer: Two trees Sapphire Plus Rafts:…
I added files for a 15 degree tent, I'm pretty new at Fusion360 so the models are pretty basic
Tented at 11 degrees. Base doesn't need too much infill. Wrist rest is printed in TPU along with the feet. I found that spiral infill at 5% with 2 walls and 2 top layers had just the right amount of give for a comfortable cushion. Files…
Parametric Split Keyboard Palm Rest A two-part, free-floating palm rest system designed specifically for split mechanical keyboards (Lily58, Corne, Sofle, and similar). Because the units are free-floating, they adapt to any desktop setup.…
