999 modeli
Made possible by my amazing Patreon supporters! If you like my work and want more models you can support me in Patreon Darth Vader is a fictional character in the Star Wars franchise. The character is the primary antagonist in the…
Wydruk około 8,24 €–10,07 € nettoWstępna wycena jednego wariantu
Nice stand for game controllers. This stand is suited for xbox one and series x/s and ps5 controllers. It is inspired on Darth Vader from starwars. If you don't own a 3d printer or just want to buy it. You can buy it on my shop ←
Wydruk około 4,22 €–5,15 € nettoWstępna wycena jednego wariantu
Come to the slightly smaller dark side! Darth Vader for Soozafone's fantastic Mini 13 armature. Remix of my Lucky 13 version, with additional parts, and detailed legs. Mini 13 Vader needs his troopers. Get the Stormtrooper model here:…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 33,41 €–40,84 € nettoWstępna wycena jednego wariantu
Support me & Join Printables Club The recorder flute, inspired by Darth Vader's lightsaber from Star Wars movies.
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Darth Vader Bust - on a base with lettering Printer : Flsun V400 layer height : 0,1 line width : surface 0,4 ; inner outer wall and filling 0,6 Scale 100 % no support ; Lightning infill 25% ; print time ~ 14 h JAYO PLA Meta Black…
Wydruk około 9,67 €–11,82 € nettoWstępna wycena jednego wariantu
Come to the dark side! Minimal Darth Vader skin for Soozafone's fantastic Lucky 13 armature. Lucky Vader needs his troopers. Get the Stormtrooper model here: https://www.printables.com/model/199583-lucky-stormtrooper UPDATE: Get C-3PO…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 19,22 €–23,49 € nettoWstępna wycena jednego wariantu
Darth Vader's TIE fighter model consists of 9 parts + stand, of which 3 parts are printed with the colorprint function. The sequence of colors is listed under the stl and g-code files. Recommended Print Settings: layer height: 0.15 mm on…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
The multi-material version of Darth Vader recorder flute, inspired by Darth Vader's lightsaber from Star Wars movies. Print instructions E1: black E2: silver E3: red STL:…
Wydruk około 11,94 €–14,60 € nettoWstępna wycena jednego wariantu
🖼 Dart Vader Oilpaint Art by AI .. "Filament Painting" 👀Preview: 🔧 Printing Settings: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm 🎨 Materials: PLA JakobFIlament Black Transmission Distance: 0.3 PLA…
Wydruk około 3,80 €–4,65 € nettoWstępna wycena jednego wariantu
vader coaster
Wydruk około 3,12 €–3,81 € nettoWstępna wycena jednego wariantu
Off-Duty in the Outer Rim Collection: Vaders “Sith Squash and Vine” a Gourd Hobby Farm. The getaway from Mustifar is a remote swamp island on Felucia. Vader grows his crafts gourds here and is well known for the quality of birdhouse gourds.
Wydruk około 10,78 €–13,17 € nettoWstępna wycena jednego wariantu
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) Dun Dun Dun dun DUN Dun dun DUN Dun... Now, everyone, stop requesting Darth Vader! He's here! Print him! Be happy! My first memory of…
Vader Skull. Added a version that fast-fixed the hole in the top of the helmet. its called darthvaderskullfixhole.3mf and .obj. Give it a shot let me know how it works.
A mini of Darth Vader. It buggs me that a lot of the minis out there dont make the iconic and fashionable skirt Darth Vader wears! It has the chest and belt prepared for multicolor printing, however due to the size, a 0.2 nozzle is…
Mini Vader Figurine Printed with fuzzy skin effect. Fuzzy Skin: Contour Fuzzy Skin Point Distance: 0.15 Fuzzy Skin thickness: 0.15 If you're interested in the commercial use of my models, check the link to my Patreon…
It has been a long journey, but I was finally able to finish this project. Let me start by thanking Steen Winther. His model ( https://grabcad.com/library/darth-vader-helmet-2 ) was the starting point of this remix. 14 months ago I…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services. This…
Original part : https://www.thingiverse.com/thing:4352769/files
Here is my new Darth Vader lightsaber design. This specific style is inspired by the 'Empire Strikes Back' version of the prop. Use supports for the Lower Knob and Clamp Section. There is a version of the upright grips with a tear-away…
I did not need the base so it was printed without. Attached 3mf file and stl file for it. Sword was not printed. I used a red coloured tooth pick Please don't forget to hit the like button when downloading. Thank you!
If you want a pen holder with style, this is the perfect one for any Star Wars fan. This'll make a great gift or personal desk item. Permit Lord Vader to give you your pen/ring/remote/phone etc and hold it for as long as you deem…
If you like the project then I would welcome any support like, comment, follow or on this account: paypal.me/BalazsSzonyi I printed it upside down.Darth Vader is a fictional character in the Star Wars franchise. Born as Anakin Skywalker,…
This has been on my ta do list for months and I've had numerious requests for this Helmet. I've done my best to provide 3 differant variants of the Helmet as evey one likes alternatives, so you now have plenty to choose from. Like…
Darth Vader Duck 2 Color AMS, MMU, or ACE Pro PLA Basic Black PLA Basic Grey Bambu Labs .3mf Included Commercial License Available For commercial use: https://www.patreon.com/c/atro3dprints/membership Special Thanks to PCBWay! This…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is a fun Star Wars character bookmark…
This is a remix of a great model by goldmax on thingiverse. The 2nd picture shows the new remixed body. I had to remix it for two reasons: I added more space between the arms to allow for Charmin Ultra soft/strong rolls from Costco as the…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
The kneeling Vader from jhwblender / FLOWALISTK is an awesome design I fell in love, immediately. It is exactly what I was looking for since a long time. But during printing several issues came up. This led me to the decision to rework…
Hello guys!! I have optimized the wing components to enable better single color printing. I would like to acknowledge the fantastic work of the original designer and give credit for their initial creation. Specifically, I have separated…
Modified Variant 1 of the original model from Jace1969 to be used as a pencil holder. Simplified geometry, insides and overhangs to allow for the “cup”. To be printed upside down without supports (or some custom supports in the middle).
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (paint-on supports) Scale it as you like :)
If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…
A highly detailed and realistic bust of Darth Vader , created for true fans of the Star Wars saga . This model faithfully captures the imposing presence of the Dark Lord of the Sith – from the smooth, iconic helmet to the intricate chest…
0,2 layer is ok, 2 versions avaiable, one with light sabre (will test your stringing a bit) and vanilla vader without sabre No supports needed may the force be with you… like it favour it, share it :D
This is a set of pieces that can be used to recreate a Darth Vader figure at 500% scale. This figure was introduced as part of the TIE Fighter and Y-wing set published in 1999 and appeared in 4 more sets between 2000 - 2003. There have…
This is a book stand for your library that makes it look like Darth Vader is holding your books using the Force. Since the models are separate and the pin holding the character in place is on the book stand part, you can also just print…
Redesigned the wing components for better multicolor printing. The first designer did a fantastic job. Give him credit.
There werent enaught decent Wader helmets for tow hitch covers so i merget this to 50 mm tow hitch.
Just Darth Vader Keychain :) Printing required supports. Print profile are for P1S: 2 versions - smooth and Fuzzy skin. Print settings: 0.16mm layer, 2 walls, 15% infill Height is 6 cm, but you can easily scale the print file. May the…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
This Darth Vader Bust is very easy to print and does not require any support material. I have included a “3MF” file with optimized lightning infill to make this easy to print and minimize the filament needed. I also included “.gcode”…
Rafts: Yes Supports: Yes Resolution: .12mm Infill: 20-30
Darth Vader Can Holder (0,5L) I designed a Beer (soda) Can holder in the shape of Darth Vader, which easily fits 0.5L EU cans. My print settings ( PLA ) : 0.2mm layers / 15%gyroid / 3 walls / tree supports / Fuzzy skin If you want a…
Remix to hold a piece of 1.75mm filament as the lightsaber. The original piece was very big to be considered a "mini". This height of my model is 7cm. I advice not to shrink it further down (or enlarge it a lot) if you want to use the…
This is a printable version of Darth Vaders helmet. It has a few different options for printing depending on the size of your printer. It has been on Thingiverse for a few years, but for some reason it has disappeared over there. So I…
Remix of two amazing designs. Original files: Mini Vader by itech3dp: https://www.thingiverse.com/thing:2936081 Jack-O-Lantern by Makies : https://www.thingiverse.com/thing:167043 Print instructions Rafts: No Supports: Doesn't Matter…
UPDATED (12-20-2023): Version 2 has slightly shorter “frosting”, an edge on the lightsaber to allow for easier MMU/AMS painting, softer edges and other minor tweaks. Flexi Gingerbread Darth Vader. Model is designed with different heights…
Any feedback would be greatly appreciated . Last minute Easter Decor Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed Scale it as you like :)
Star Wars Darth Vader headphones stand Print in two part and slot together The normal size stands about 210mm tall, you can use the Star Wars base tall to make it slightly taller without changing the other dimensions The extra large top…
Thank you to Eastman for creating this amazing Darth Vader bust. I have remixed it into a low poly version, but be sure to check out the original as well. This low poly Darth Vader bust is a unique and eye-catching addition to any Star…
Darth Vader loves watching sunrises (and sunsets). Hates long walks on the beach, however. In the early morning hours, before the galaxy awoke, Vader would venture to a secluded spot on a remote planet, far from the prying eyes of the…
Thanks to Corra Ashu for providing another awesome model. Cheers Jace
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
****Find all of my exclusive content on my Thangs.com profile **** I find your lack of chunk disturbing... This chunky holiday Darth Vader kit is roughly 8.5 inches (22cm) tall once assembled. Shop the filament we used in this model on…
Simple designed models of the Darth Vader Advanced Tie Fighter and Tie Interceptor ships as seen in original Star Wars trilogy movies. I placed the loop for the ornament a little back on the Vader Tie Fighter for better balancing. They…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
This model is compatible with the lego system.
Remixed and combined a keycap with Star Wars Figures. I have made a FULL-BODY and a HEAD-ONLY versions. Choose what you like. Print Instructions: 0.1mm height 15% infill Supports are recommended Please share\like\add a make if you liked!
Darth Vader head inspired cabinet Knob I suggest an M3 screw Drill a hole for screw mounting If you liked this model, a coffee is always welcome ☕🙂 buymeacoffee.com/goodbuyerclub
From Thingiverse, tweaked a little bit. Vader Pencil Cup (Low-Poly) by tmasantos - Thingiverse Does not require any supports.
Darth Vader Keychain Category: Keychains
A Darth Vader piggy bank (money box) which is fully 3D-printed and can be opened and closed thanks to a locking screw mechanism. File for BambuStudio Slicer: https://makerworld.com/en/models/451981#profileId-359096 Have fun with it and…
Now we have Darth Vader's lightsaber, this is a bit more designed after his hilt in episodes 4 and 5, the most noticeable difference in his RotJ hilt is the emitter shroud, so I included an extra piece designed after his RotJ shroud if…
really loved the mini darth vader, so i made one that fits perfectly a clipper lighter thanks to funda clipper cover, looks great spray painted shiny black remix from https://www.thingiverse.com/thing:2936081…
The Dark Lord of the Sith's Abode Happy May the Fourth from MiniWorld3D! This model is inspired by Darth Vader's Castle as it appeared in Rogue One - A Star Wars Story, and in the comics! This is where Director Krennic visits Vader during…
I love the bust Eastman created, but single color didn't do it justice. So I painted it in PrusaSlicer and you can see the result printed on my XL. I'm very happy with the print. I hope you enjoy it as well. I added some pop to the…
Was tired of loading other darth buddha models that wouldn't slice correctly with cura and required support to print. Flattened the base of the buddha and modified the head to fit better. Also added a proper chest plate to complete the…
Low Poly Vader Skull. Eh. Why not.
As requested the Darth Vader twist fidget, free to enjoy now - This non profit fan art fidget is ideal for stress and anxiety fidgeters Simple to print model that's print in place, simply remove any supports and you're ready to fidget -…
Darth Vader Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab…
Creator: Tamraz https://www.thingiverse.com/thing:1092181 I fixed the electronic part of Darth Vader armor.
Canva AI only used for creating the image model by Zbrush Design Concept This model of Darth Vader showcases the iconic character from the Star Wars universe with intricate detailing and a commanding presence. It captures his menacing…
A woggle of Darth Vaders head
This model was inspired by the iconic Darth Vader helmet from Star Wars, combined with a Schrader valve cap for a unique and fun twist. Whether you're a Star Wars fan or just looking for a cool and functional 3D print, this cap is the…
This is a headphone stand with Darth Vader from Star Wars, it's a model that is fun and powerful at the same time. This headphone stand comes in 2 parts, the actual stand with the figure and then the headphones holder to slide onto it and…
7 Color HueForge model. Darth Vader ‘Pop Art’ filament painting made using Bambu PLA Matte and PLA Basic filaments. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Bambu PLA Matte…
A lone figure stands in silence, cloaked in shadow and framed by the remnants of a galaxy forever changed. This is no pose of conquest… only Darth Vader in stillness, burdened by the choices that forged him, the lives lost in his wake,…
single color model don't forget to vote for the model/designer of the year :D
A keycap for Keychron K3 with Darth Vader mask
Baby Yoda: https://makerworld.com/en/models/221166#profileId-239784 Darth Vader: https://makerworld.com/en/models/221163#profileId-239884 --- Darth Vader Character --- !!! NO SUPPORTS NEEDED !!! U can print that without support, using…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Darth Vader HueForge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Protopasta Black Transmission Distance: 0.5 PLA Kexcelled Red Transmission Distance: 4.5 PLA Protopasta White…
Hier gibt es eine ausführliche Beschreibung: https://druckwasdaszeughaelt.de/star-wars-battlefront-ii/#Darth-Vader,-Kampf https://ko-fi.com/dwdzhde Vader in Kampfposition aus dem Spiel Star Wars: Battlefront 2. Skaliert auf…
Darth Hoodie Clip 🖤🎭 Add a powerful touch to your hoodie with this Darth Vader-inspired cord clip! Simply slide it onto your hoodie strings—no glue or sewing needed. 🔹 Simple & Functional – Fits most hoodie drawstrings 🔹 For Galactic Fans…
requires supports one file is keychain other file is original
This is a remix of Peter Farell's Darth Vader skull with the following changes: Repaired holes Removed hidden faces and internal geometry Remodelled mouth and tusks Remeshed with adaptive density and lower vertex count Update: Simplified…
Low-Poly Darth Vader bobblehead for your printer. Just add G-Code and enjoy the bobble! https://youtu.be/y7rcWTLWsCM https://youtu.be/3HwXJQMGgsQ https://youtu.be/5cWb99a7tlI Printing Base, head, and spring can be printed without…
Sorry about the large size, but if you scale down the model to 2,5 %, it will fit perfectly.
A simple model of Darth Vaders chest panel. I kept all the parts separate so you can print them in different colors or have an easier time painting them. The MainBox has recesses for all the buttons, but you'll need to glue them down.…
Prusa Affiliate link: http://www.prusa3d.com/#a_aid=3090 All print information is included in a txt file. Hope you enjoy!
