Wyniki wyszukiwania: ved

Sortowanie

Liczymy pasujące modele…

P
Printableseried

18650 improved spacer/holder

I attempted to use some 3D-printed 18650 spacers, but they weren't ideal. The injection-molded design you can get from aliexpress has two identical tabs on each side, which makes the other printed alternatives weaker. This updated module…

Pobrania
4613
Polubienia
382
Ocena
4,41
P
Printablesrahix

Honey Comb Screwdriver Holder Screw Mount Improved

A very minor improvement to the screw mount remix of the honey comb screwdriver holder. This version Has fillets/chamfers around the outside edges to make it more pleasant to touch. The screw holes are slightly widened for M4 countersunk…

Pobrania
1238
Polubienia
318
Ocena
5
P
PrintablesHarms3D

Tissue Box Cover (smaller, square) #2 - curved Stone Pattern

A very simple cover to use a cosmetic tissue box available in the supermarket with a fancier look. The cover is bottomless and designed to put only the cover over the box. I measured my tissue box beforehand and then scaled the cover in…

Pobrania
917
Polubienia
182
Ocena
4,91
P
PrintablesAtomicVirology

Millennium Falcon Tube Holder (improved)

Do your midipreps using the fastest hunk of junk in the galaxy. This tube rack holds 50 mL conical centrifuge tubes ("falcon tubes"). The base and attachments have been redesigned so that the model has minimal supports and it clicks…

Pobrania
689
Polubienia
54
Ocena
4
P
Printableselectrodraco

6-shot disc shooter with improved lever

The famous disc shooter has three issues that this remix improves upon: The last disc in the magazine has poor shooting performance because it is deflected by the lever. This is resolved by adding a disc-shaped lid to the end of the…

Pobrania
652
Polubienia
248
Ocena
5
P
PrintablesRandumbPrints

Disney Lorcana Deck Box - Sleeved Variant

Update - 07/09/23 Yet another tweak, whilst sleeved cards did fit in the deck box they were a little tight around the lid, I have now fixed this issue :) UPDATE - 06/09/23 I have tweaked tolerances on a couple of the parts so the logo and…

Pobrania
576
Polubienia
85
Ocena
5
P
PrintablesDrawnToDigital

Improved Dosing Funnel fits 54mm Breville/Sage Portafilter

A dosing funnel specifically designed for the WDT (Weiss Distribution Technique) that is compatible with 54mm Breville/Sage portafilters. This funnel captures stray coffee grounds that would otherwise be lost during grinding. Key features…

Pobrania
564
Polubienia
50
Ocena
4,78
P
PrintablesJames

Tobii Eye Tracker 5 mount for Samunsung G7 (1000r curved monitor)

A mount i made for my eye tracker 5 to mount on my Samsung G7 monitor. This mount allows you to still operate the joystick/power button. The large center de-boss is to aid with aligning the camera module, and the notch is there to help…

Pobrania
553
Polubienia
19
Ocena
5
P
Printableskaje

Filament Clip - Mini Curved Version 3 - IMPROVED AGAIN!

NOTE : Check for newer and better(?) versions of this clip by searching for “filament clip mini curved” : https://www.prusaprinters.org/search/all?q=filament%20clip%20mini%20curved This is my third attempt at getting the “perfect”…

Pobrania
546
Polubienia
69
Ocena
4,87
P
PrintablesMichal Fanta

Short Curved Track - E1

Double-sided short curved rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…

Pobrania
456
Polubienia
50
Ocena
5
P
Printablesrh25170

Improved Gridfinity Dovetails

This is a redesign of the dovetail connectors from ‘Gridfinity Master Collection.’ Based on the file name, and the owner of the collection, I believe credit is due to GlitchPrinter for the original idea here. These are slightly smaller…

Pobrania
258
Polubienia
29
Ocena
5
P
PrintablesSpool Designs

Funny "LIVED LAUGHED LOVED" Halloween Gravestones | Various Designs; Single & Multiple Material Options | Home Decor Parody

This is a funny Halloween-themed version of the popular motivational phrase “Live, Laugh, Love” that is commonly found as signs and such in home decor – put those away and make these “LIVED LAUGHED LOVED” gravestones for Halloween!…

Pobrania
225
Polubienia
66
Ocena
0
P
PrintablesH3dSprint

Railroad crossing for curved track - toy train

The railroad crossing is build up by 5 parts to get a smooth surface for the road. To connect the parts of the inner and the outer curve, I have designed a dovetail guide. The parts was assembled in a vice to avoid tilting, but it should…

Pobrania
181
Polubienia
30
Ocena
0
P
PrintablesMichal Fanta

Short Curved Switching Track - P2

Double-sided curved switching track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…

Pobrania
137
Polubienia
35
Ocena
0
P
Printablesmonev44

Curved Ice Scraper with engineered compliance

Design Goals Car windows aren't flat so the tools we use on them shouldn't be either. It's cold out there, think about people wearing big poofy gloves/mits. Multiple part assemblies like replaceable edges lead to extra failure points,…

Pobrania
85
Polubienia
36
Ocena
5
P
Printables3DMason

Improved Punch Button for HDS68

This bunch button should better conform to the profile of an HDS68 airsoft butt end. Please provide feedback since I don't own an HDS68 & I have no ways of testing it. Thanks for your interest in this model!

Pobrania
74
Polubienia
5
Ocena
0
P
PrintablesGraloth

Anti-rattle curved plate guides for Core One L Skadis mod

The Skadis mod for the Core One L made by @lostinthesloths worked great, with the exception that the build plates would rattle in the rails when printing something that caused a lot of vibration. Looking at remixes for the original Core…

Pobrania
69
Polubienia
24
Ocena
5
P
PrintablesPeter Farell

Carved Ivory SaltCellar

Carved Ivory SaltCellar with lid.

Pobrania
56
Polubienia
24
Ocena
0
P
PrintablesANDesigns

Shatterpoint - Sleeved Card Dashboard with Token Rail

This was printed in .04mm PLA .20mm layers 15% infill but also adjusted the horizontal shells bottom to be 5 printed with brim to prevent warping. large sleeves used:…

Pobrania
53
Polubienia
1
Ocena
0
P
Printablesfifindr

Carved Stone Catchall Bowl

A catchall bowl inspired by the smooth, eroded surfaces of carved stone. The organic form and softly rounded edges create a calm, natural feel, while the subtle texture enhances its sculptural character. Designed for keys, coins, and…

Pobrania
35
Polubienia
8
Ocena
0
P
PrintablesGizmo Gurus

Great Outdoors Coasters: Outdoor Life Set – Color Swap Ready, Cabin Approved (NO MMU NEEDED)

Celebrate your love for the woods with the Outdoor Life coaster—a rugged yet classy design made to bring the outdoors in. This model uses purposeful extrusions to guide flawless color swaps and includes a .3mf project file with pause…

Pobrania
26
Polubienia
4
Ocena
5
P
PrintablesIsaac Howard

4 inch (104mm) duct cover improved

Finally took apart my resin cabinet, putting it back together I improved the duct covering to look less meh. An improvement over the first rendition here: https://www.printables.com/model/128110-4inch-duct-hole-cover

Pobrania
26
Polubienia
4
Ocena
5
P
Printablesnick779

Infill swatch / Insert holder for the Improved Ultimate Coaster

I had way too many swatches laying around from playing with different infill densities and fill patterns that I made a storage box. These inserts are great conversation pieces and are easy to accumulate enough to use for entertaining.…

Pobrania
13
Polubienia
1
Ocena
0
P
Printables3DMason

Print Friendly Curved Analemma Vertical Plate for 3DMason Heliochronometers - Southern Hemisphere

Compatible for the southern hemisphere only. For the northern-hemisphere version, check here for the correct parts: Print Friendly Curved Analemma Vertical Plate for 3DMason Heliochronometers by 3DMason | Download free STL model |…

Pobrania
7
Polubienia
3
Ocena
0

The Original Dragon Egg - New & Improved for 2025

For the most up-to-date version of this design, check out the Makerworld version. It's the original threaded dragon egg, great for Easter egg hunts, gifts, and Game of Thrones fans. This is my made-from-scratch design from 2022 that has…

Pobrania
67 599
Polubienia
11 873
Ocena
4,93
P
PrintablesCardSlinger

Card Slinger 3.0 - for MTG / ManaBox App - For Sleeved and Unsleeved Cards - Easily scan in bulk quantities of cards by hand

Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…

Pobrania
62 689
Polubienia
4801
Ocena
4,66
P
PrintablesBlizzard

Improved Bambu Lab Reusable Spool Holder

This design improves the original Bambu Lab reusable spool holder in the following ways: Allows you to see how much filament is left on the spool and uses less filament to print the spool due to the hexagon pattern on the sides. Also, the…

Pobrania
53 954
Polubienia
6179
Ocena
4,9
P
Printablesagepbiz

Print-in-place and articulated F14 Jet Fighter with Improved Wingdesign

Projectvideo: https://youtu.be/SNWnS3XnjX8 I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real F14 better, while still being print-in-place and articulated. The wingtip breaks of…

Pobrania
42 089
Polubienia
8916
Ocena
4,87
P
Printablesfuchsr

Improved All-In-One Temperature and Bridging Tower -- Hi to Lo Temps, PLA/PETG/ASA/TPU/PCCF

Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…

Pobrania
37 518
Polubienia
5599
Ocena
4,91
P
PrintablesDamon Cui

Improved version of gravity knife fidget toy,no screws needed

Print, assemble and play directly, no screws needed 8-11

Pobrania
28 176
Polubienia
3622
Ocena
4,79

Phone Stand modern curved design

Mobile phone stand in a modern curved design. The picture shows the stand with an iPhone 11 Pro Max. Also check out my curved iPad holder and other designs.

Pobrania
23 393
Polubienia
2697
Ocena
4,93
P

Adjustable Monitor shelf - Fits any display: curved back, thin bezel, laptop, or TV.

Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model. Update 2: I now recommend printing the…

Pobrania
15 938
Polubienia
3998
Ocena
4,88
P
PrintablesHarms3D

Vase #3 - curved Stone Pattern

A small plant pot that I created in 4 different designs. If you want to scale the plant pot correctly, simply insert a cylinder with the necessary dimensions in Prusaslicer and then scale the plant pot in such a way that the cylinder fits…

Pobrania
15 557
Polubienia
6853
Ocena
4,9
P
PrintablesHarms3D

Tissue Box Cover #1 - curved Stone Pattern

A very simple cover to use a cosmetic tissue box available in the supermarket with a fancier look. The cover is bottomless and designed to put only the cover over the box. I measured my tissue box beforehand and then scaled the cover in…

Pobrania
10 769
Polubienia
4493
Ocena
4,95

iPad Stand modern curved design, iPad Halter

iPad Halter in einem geschwungenen Design. Auf den Bildern ist der Halter mit einem 12.9 Zoll iPad Pro zu sehen. In der Mitte habe ich den Halter ausgenommen, damit mit dem Finger der Bildschirm nach oben gestreift werden kann. Der Halter…

Pobrania
9222
Polubienia
726
Ocena
4,92
P
PrintablesDavid Kingsman

Improved Wandering Hour Clock

Introduction How to read: The current hour points to the current minute. This is a rework of the wandering hour clock by clockspot : https://www.printables.com/model/69885-wandering-hour-clock I changed the mechanism, they did the concept…

Pobrania
8457
Polubienia
6454
Ocena
4,78
P
PrintablesFlaminSpike

Counter Bin 2.0 - Improved Kitchen Cleaner

Counter Bin - Improved Design for Effortless Kitchen Clean-Up Model Overview: Introducing the Counter Bin , a refined and enhanced version of existing kitchen counter cleaning solutions. This model combines the best features of two…

Pobrania
7642
Polubienia
2687
Ocena
4,82
P
PrintablesBike Cyclist

Improved Auto Coin Sorter

Improved Auto Coin Sorter - Coin Roll + Classic Version New in latest version 7.528: AUD - Australian Dollar update only. 50 cent coin dimensions increased to match the circumradius of the 12-sided coin. Should sort and stack just fine…

Pobrania
7370
Polubienia
780
Ocena
4,16
P
PrintablesFaran Gillbanks

Assembled SR-71 Blackbird with assembled improved base at 150%

If you would like to download this, please do so from MakerWorld - https://makerworld.com/en/models/96340

Pobrania
7013
Polubienia
1974
Ocena
4,95
P
PrintablesDET-Man

HappyHub - Improved Filament Loading for BoxTurtle (4-in-1 Hub)

The 🥰 BoxTurtle's 4-in-1 hub can be a bit “ temperamental” 😖 when loading filament in certain situations (especially on lane 4 ) with the filament getting caught and stuck in the bearing recess at the end of the filament path. There is…

Pobrania
6916
Polubienia
111
Ocena
5
P
PrintablesRyan Bailey

Bit Holder Remix with Relief Cut Corners - Improved Bit Holding

To support me the most, please download from MakerWorld Link: https://makerworld.com/en/models/170277#profileId-186972 Hate having to use a plyers to remove the bit? Well no longer. This remix has relief cuts on all the corners meaning…

Pobrania
6564
Polubienia
1809
Ocena
4,92
P
Printablesz s

Spiral Vase Twisted Spiral Vase Vase Spiral Vase Spiral Vase Flower curved vase Flower vase vase vase vase vase vase vase

1. Set Infill to 0% Go to Print Settings → Infill → Set to 0% This removes the internal fill, but the walls remain thick. 2. Adjust Wall Thickness In the Shell / Perimeters section, modify the wall thickness: Wall Loops / Perimeters – set…

Pobrania
6558
Polubienia
617
Ocena
4,91

Flashforge Adventurer 5M (AD5M) IMPROVED Spool Holder, Inlet, Runout Sensor Mount + SIDE MOUNT Spool Holder! v1.1

This was made for use with the DIY enclosure available here . HEADS UP - 1 of 3 - new better version of this! I've published a new, improved remix of my popular side-mounted spool holder — PLEASE NOTE: it's not just about the four…

Pobrania
6484
Polubienia
642
Ocena
4,6
P
Printableswedgeworks

Improved Fruit and Vegetable Washing Basin now with Southern Hemisphere support!

***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…

Pobrania
6088
Polubienia
998
Ocena
4,9
P
PrintablesbyWulf

Cubone skull - Osselait - Supports removed

The original model had supports within the model data. I removed them and cleaned up the surface afterwards, so you can generate your own support by your slicer in the way you think the supports work best. Don't try to print it without…

Pobrania
5664
Polubienia
1719
Ocena
4,92
P
PrintablesJoe Paradise

Easter Crochet/Weaved Bunny

Size: 125mm x 90mm x 77mm WEAVED version: Filaments: PLA Vanila White (body), PLA Jet Black (eyes) and Filament PM PLA+ Pastel Bubblegum Pink (nose) CROCHET/KNITTED version: Filaments: Filament PM PLA+ Pastel Bubblegum Pink (body) and PLA…

Pobrania
5615
Polubienia
1103
Ocena
4,94
P
PrintablesBMPrintShop

Zinc 2.0 All Improved Parts

Please leave a like and rating and consider posting a make if you print and enjoy the project! Also check out these designs of which I offer hardware kits for: Zc Aus Znc Aus Znc Aus Cosmetic Part Variants Zinc .50 Zinc .50 Cosmetic Part…

Pobrania
5600
Polubienia
2672
Ocena
4,75
P
PrintablesShadowcaster72

Universal Plate/Picture Stand with Improved Base

Found with a heavy plate that I wanted to display that the original felt like the balance was off and could easily fall over when bumped. I have copied the summary from DanRom624 (original from Thingiverse:…

Pobrania
5501
Polubienia
281
Ocena
5
P
PrintablesArrowSwift

Improved Bullet Container

I got some Sunlu Gold PLA for Christmas and I knew what I had to print with it. It won't kill any werewolves (yes I know those are silver bullets don't get mad at me you can print it in silver), but man does it look sick. I changed the…

Pobrania
5180
Polubienia
984
Ocena
4,91
P
PrintablesJEng

Creality K1 - Improved side fan silencer and protector

I was looking for a silencer and a protective grille for my K1 side fan. There is a wide range on offer here, but any grille in the airflow can increase or decrease the noise. As I didn't want to test everything, I constructed my own. My…

Pobrania
5172
Polubienia
365
Ocena
4,78

Flashforge Adventurer 5M (AD5M) IMPROVED, SIDE-MOUNT Spool Holder, Inlet, Runout Sensor Mount! v3.1

FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…

Pobrania
4920
Polubienia
450
Ocena
4,96
P
PrintablesTechnoid

Prusa Mk3S/+ Improved Fan Shroud

This is a completely redesigned fan shroud for the Prusa i3 MK3S/+, which not only delivers fantastic airflow like the old Mk3 shroud did, but which also sits far away from the heatblock and will not melt when printing at high…

Pobrania
4795
Polubienia
505
Ocena
4,63
P
Printablescolorful-corvid

Articulated Lizard with Rotated Ankles and Improved Clearances

A Remix of McGybeer's classic articulated lizard, with wider clearances so it can be printed smaller (my Ender 3 can consistently handle it at 0.55 scale with no issues). The ankles are also improved because the original looked a little…

Pobrania
4537
Polubienia
301
Ocena
4,77
P
Printablesmathiaspl20

OTF Knife Switch Blade (Functional) "improved" version v1.3

I took David6722's genious OTF Design and tweaked it a bit, I added places for screws, a pocket clip, altered the button and made a few more improvements. Prints very easily but may need some supports on the newly created overhangs. Print…

Pobrania
4520
Polubienia
492
Ocena
4,32
P
PrintablesJuan Puchol

Improved MK4 Fan Duct

This fan duct improves the air flow so the overhangs are better (up to 70º with very good quality, 3rd picture) I recommend to use Prusament PC Blend-Carbon Fiber or PA11-CF, because they are heat resistant and to reduce weight mainly,…

Pobrania
4429
Polubienia
878
Ocena
4,86
P
Printablesagepbiz

Print-in-place and articulated MiG-23 Jet Fighter with Improved Wingdesign

Projectvideo (F14 with breakaway): https://youtu.be/SNWnS3XnjX8 I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real MiG better, while still being print-in-place and articulated.…

Pobrania
4405
Polubienia
875
Ocena
4,82

Collapsing Katana Single Edged Curved Blade (Print-in-Place)

This version of the single edge curved blade collapsing katana prints in place all as one part. The Replaceable Blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…

Pobrania
4393
Polubienia
560
Ocena
4,36
P
PrintablesPhilCraft

Improved modular gridfinity drawers

The original model was already pretty good, but I wanted the same style of drawer for everything, whether I want to use it with or without bins. Also I absolutely wanted a pull-out-protection. I also wanted labels, so I added slots for…

Pobrania
4233
Polubienia
1705
Ocena
4,85
P
PrintablesLoboCNC

Zoom Phone Tripod (Improved)

This updated version of my Zoom Phone Tripod tilts to any angle, including tilting forward for those awkward zoom yoga classes. Collapses nicely for storage. This version fixes a few issues: the legs snap into place more firmly, the jaws…

Pobrania
4043
Polubienia
1006
Ocena
4,75
P
PrintablesPopandsicle

Latching Pokémon Trading Card Cases (Fits Sleeved Cards and Top Loaders!)

Looking for an attractive and flexible storage system to organize and protect your trading cards? Don't banish your hard sought collectibles to flimsy generic cardboard boxes in the back of your closet, store them in style in these…

Pobrania
3874
Polubienia
746
Ocena
4,94

Carved Chess Piece Set

Scalable carved high-detail statues in a medieval theme. Supports required. Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

Pobrania
3828
Polubienia
741
Ocena
4,75
P
PrintablesGuilouz

FLSUN V400 Improved Fanduct

Improved FLSUN V400 Fanduct Note: Fans are glued to stock fanduct but they can be peeled off easily with a cutter blade. Edit 05/11/22: New Fanduct allowing an overhang of up to 70/75° to be achieved

Pobrania
3814
Polubienia
307
Ocena
4,96
P
PrintablesGiwi

Figet Clicking Wheel Version 2 Improved

Make sure to enable "detect thin walls" for printing! Hi, this is my improved Version of my Fidget Toy. It features a lighter and more consistent spring design which can also be removed. If you are not happy with the resistance you can…

Pobrania
3781
Polubienia
349
Ocena
4,6
P
PrintablesAndrew Frahn

Honeycomb Storage Wall Improved Hex Inserts

Put simply - So easy to remove they fall out. UNTIL you put something into them, then so tight they might even hold tighter than the original design. How? Magic of course. The inserts for attaching to the wall also have the same cuts to…

Pobrania
3777
Polubienia
988
Ocena
4,87
P
PrintablesNairod

Fast Start GCode + Improved Quick Bed Leveling - End Retract Back to AMS for Bambu Lab X1 X1C & P1P

V5 For P1P and X1C As this is skipping the LIDAR but keeping the Bed Leveling if desired. Date : 5 March 2023 Improvements: -Improved the overall speed of the start gcode -Reduced the purge of filament by a factor of 21 times 5mm vs 105mm…

Pobrania
3701
Polubienia
236
Ocena
4,67
P
PrintablesSHQ

V29.1 improved whistle - significantly louder, angry version

Since i was a little bit disappointet of the relatively low noise level of the original V29 whistle, i had to improve it. This whistle has larger cavities and therefore a lower pitch. The interval between the two tones is larger and more…

Pobrania
3687
Polubienia
480
Ocena
3,89
P
Printableswillsside

Improved Fractal Pyramid for Vase Mode - Remix

This is a remix of ricktu's Fractal Pyramid on Thingiverse that is more reliable for slicing in Cura 5.1.0. When sliced in vase mode, the original model had thousands of retractions on the first layer. So I edited the original models in…

Pobrania
3463
Polubienia
413
Ocena
4,95
P
PrintablesLoboCNC

Improved One-piece Capo

More stylish! More functional! More printable! This is an improved version of my earlier guitar capo that includes a number of improvements: Rubber in the presser bar frets the strings with no buzzing and with less force. (I've also…

Pobrania
3427
Polubienia
276
Ocena
4,58
P
PrintablesSDHayes

MUCH Improved Spool Winder - Helical Gears

Version Two of my reimagined spool winder. Les Kaye's model is really nice, but as I mentioned in my previous remix I ran into several issues (some mechanical and some cosmetic) that I felt could be improved, hence my Reimagined Spool…

Pobrania
3421
Polubienia
644
Ocena
4,8
P
PrintablesKanyonKris

IMPROVED Rocktopus

Most Rocktopus have a very rough transition between head and body. I rebuilt this Rocktopus from the original Dr. Smolder Bravestone and the latest version of the mini octopus and made a nice smooth neck. The 3MF file is from Bambu Studio…

Pobrania
3336
Polubienia
103
Ocena
4,95
P
PrintablesBike Cyclist

Improved Auto Coin Sorter V7.5 - Coin Roll + Classic Version

Improved Auto Coin Sorter - Coin Roll + Classic Version New in latest version 7.527: Improved geometry to increase reliability and accuracy of the sorting. Improvements: Sorts into removable coin tubes to facilitate both general operation…

Pobrania
3138
Polubienia
284
Ocena
4,13
P
Printablesvivamus3d

Sock Clips for Laundry Rack (improved, V4)

lundiplutzmus created a brilliant design to hang sock, face-cloth, handkerchief, etc. on the rod of a dryer rack (aka airer). But even brilliant doesn't mean there are no details that can be improved ;-). So I tried a few: I rotated the…

Pobrania
3117
Polubienia
143
Ocena
5
P
PrintablesSculturissimo3D

Death Arrived — Gothic Boat Statue

A chilling gothic sculpture of Death arriving by boat, symbolizing the passage between worlds. The hooded figure, skeletal and solemn, guides his vessel through sculpted waves, holding a staff crowned with skulls. The boat itself is…

Pobrania
3115
Polubienia
738
Ocena
4,87
P
PrintablesIncedius

Dummy 13 Improved Hips

Drop in replacement for the hips. I know there are already improved hips for the dummy 13 but these are different I swear! I always had trouble with the other improved hips either with printability or with assembly. So here's my take on…

Pobrania
3071
Polubienia
890
Ocena
5
P
PrintablesAeviternal

Dead Space Marker - Smoothed and Engraved

Used a (slightly inaccurate but cooler-looking) Unitology font to inscribe the Marker from Dead Space. I've seen various paid models on other sites that use the inferior game rip version of the marker and are full of holes in the mesh.…

Pobrania
3066
Polubienia
217
Ocena
4,94
P
PrintablesPowerDoge

IMPOREVED Whetstone Knife Sharpening guide

Better Cleaner overhangs! Teardrop shaped hole with horizontal ring edges. Stronger parts! Weak point at the top eliminated. Rounded edges on contact surfaces! Helps reduce friction between the tool and working surface reducing wear and…

Pobrania
3044
Polubienia
566
Ocena
4,89
P
PrintablesOndrashek

Dyson V15 Trigger Lock - improved design

This is remix originally by RoboCop0815 ( https://www.thingiverse.com/thing:4441407 ) Improved trigger via handle. For left handed or right handed - your choice :-) Use PETG if you want it stronger. How it works: Standard print settings:…

Pobrania
2994
Polubienia
236
Ocena
4,28
P
PrintablesThreeD-Michael

Call-Your-Beloved-Whistle (Valentine's day gift)

News: Please also check out my new Safety Whistle : Update 2023-02-16: I have also designed a fancy gift box for this whistle, which you can find here : Finally a useful gift for Valentine's Day! With this fancy dual tone whistle, the…

Pobrania
2895
Polubienia
263
Ocena
5
P
PrintablesBemko

Improved bearing-less Xbox One controller mini wheel

A small modification of the bearing-less mini wheel by mrplasma ( https://www.thingiverse.com/thing:4498704 ) which is based on the pixel2 design ( https://www.thingiverse.com/thing:3049220 ). Details I noticed that in the original design…

Pobrania
2862
Polubienia
211
Ocena
4,83
P
PrintablesNoWarrenty

Gridfinity LITE Ultra boxes, improved version with STLs

These are ultralight boxes, yet they're durable enough to hold heavy items. When gripped by the sides, they don't feel flimsy. They lack magnet holes and have a flat bottom, making them perfectly compatible with the cost-effective…

Pobrania
2851
Polubienia
473
Ocena
4,81

Wood-Carved Dark Ritual Mask

An ancient mask carved out of enchanted wood. Scale to desired size. Supports required. No holes included, make your own! I chose to print at this angle to minimize supports and hide seams on rear side. Tree Supports on build plate only…

Pobrania
2706
Polubienia
869
Ocena
5
P
PrintablesTofuMonster510

Magnetic Ratchet Organizer / Holder - Improved

Magnetic to attach to the metal bottom of a toolbox and hold the ratchet better. Modular design allows for customization to your needs. The integrated linking pin can be easily cut off with flush cutters. Should fit most ratchets, 1/4…

Pobrania
2688
Polubienia
250
Ocena
5
P
Printablesbwaslo

Floating Cup improved, good balance

This is an improvement on the rather popular "Floating Cup (smoother look, foolproof assembly)", https://www.printables.com/model/164778-floating-cup-smoother-look-foolproof-assembly . See that model for some notes and directions of how…

Pobrania
2612
Polubienia
608
Ocena
4,93
P

iPad stand - improved and updated

Summary This is an improved version of the iPad stand. Here is what I changed: Added the knobs to the inner part to keep it in place when the stand is folded Reduced the gaps between the moving parts to make the model less wiggly Rounded…

Pobrania
2582
Polubienia
238
Ocena
4,69

(1 of 4) Flashforge Adventurer 5M (AD5M) IMPROVED, SIDE-MOUNT Spool Holder, Inlet, Runout Sensor Mount! v2.1.1

FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…

Pobrania
2516
Polubienia
207
Ocena
5
P
PrintablesJCVB

Elegoo Neptune 4 (Pro/Plus/Max) improved Cable Clip

An improved version of the OEM cable clip on the x-axis of the elegoo neptune 4, 4 Plus, 4 Pro and 4 Max. It doesn't pinch the cable like the original one does and has an angle that prevents the cable from touching the z axis' lead screw.

Pobrania
2479
Polubienia
254
Ocena
4,71

Paper Towel Holder - NEW and IMPROVED - Version 3

Redesigned holder (V2) with improved threads that do not need to be scaled down/up. Just print all parts 1:1. Less material and shorter print time. Recommended print settings: Layer height: 0.2 Mode: Speed Infill: 10% Material: PLA (PETG…

Pobrania
2450
Polubienia
275
Ocena
4,88

Wood-Carved Dragon Statue

A Dragon bust in the style of a Viking wood carving. Show the Valkyries we deserve a place in Valhalla. Supports needed. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

Pobrania
2381
Polubienia
709
Ocena
4,7
P
PrintablesUncleFrankSays

UFS-138 Eiffel Tower - More Realistic Improved for Printing

New improved version for 2026. It is broken into three parts. https://www.printables.com/model/1622682-ufs-170-ultimate-most-accurate-eiffel-tower-for-it Please send me your feedback. Thanks. I visited France this year and I was in Paris…

Pobrania
2372
Polubienia
86
Ocena
5
P
PrintablesOR

Improved Dispenser for Lickable Cat Treats

This is an improved version of the print-in-place dispenser for lickable treats for cats. It reduces the messines of using such treats and allows to retrieve every last drop from the tube. The model was tested by printing in PETG using…

Pobrania
2289
Polubienia
664
Ocena
4,5
P
PrintablesEvgenym

Lego City Train Curved Track Rail

Curved track rail from Lego City Train set Print instructions This print requires supports

Pobrania
2268
Polubienia
351
Ocena
5
P

New Improved - Skadis Cable Holder

Here's my wire and cable holder, specifically designed for the Skadis storage system. This innovative holder is designed to fit into your Skadis board, providing an elegant and practical solution for cable management. Its design is…

Pobrania
2222
Polubienia
292
Ocena
4,87
P
PrintablesJuan Puchol

Improved MK4 Fan Door

Cover the fan cable. Better magnet fit to prevent it moving, I hate the “clic, clac” sound when opening and closing door. Center better my improved fan duct Lighter weight I recommend to use my Improved Fan Duct:…

Pobrania
2220
Polubienia
302
Ocena
4,92
P
PrintablesJurriaan

Improved 3D Pull Copter Finger Ring - M3 screw version

Improved version of the 3D Pull Copter Finger Ring with a different rotor design. NOTE: Models not compatible with original design Features: Improved rotor design (bigger and angled differently) Somewhat longer key for easier use Uses M3…

Pobrania
2206
Polubienia
355
Ocena
4,87
P
Printablespristine wizz

Improved buckle fidget

bunckle sam (sorry for using the original pic wanted it to be recognizable as pretty much the same thing)

Pobrania
2201
Polubienia
657
Ocena
5
P
PrintablesShawn Gano

Among Us - Dead or Alive (Improved)

alpokemon did a great job modeling the outside shape of the 'Among Us' characters ( https://www.thingiverse.com/thing:4595212 ); however, the joinery I felt could use some improvements. I changed the Legs, Heads and Guts. The major…

Pobrania
2200
Polubienia
334
Ocena
4,83
P
PrintablesPeter Farell

New and Improved Low Poly Jesus

My old Version of a low poly Jesus was garbage. Hopefully this makes up for the old versions lack of inspiration.

Pobrania
2196
Polubienia
313
Ocena
5
P
PrintablesJoepie

Strawberry Crown Remover (Improved)

I was trying to find a model like this, but I couldn't find it, so I decided to make it myself. Very easy to print, Under 20 min. HOW TO USE: Gently insert at the top of the strawberry, where the crown is fixed to the strawberry. Make…

Pobrania
2169
Polubienia
843
Ocena
4,86
P
Printablessiamigo

Logitech C920 privacy cover improved

Remix of earlier designed privacy cover. Improvements is that the base/holder fits better on the camera, and the amount of material required is lessened.

Pobrania
2163
Polubienia
227
Ocena
4,89

Improved Crystal Dragon

Changes: I was getting feedback that the tail was very delicate and you needed to be careful while pulling it off the build plate. And it also looks kinda wonky with the small head and massive arms. So I upscaled the head and tail parts…

Pobrania
2126
Polubienia
342
Ocena
4,89