39 modeli
Wandhalterung für ein Wallbox Ladekabel mit Typ 2 Stecker. Das untere Loch ist von den Maßen her so erstellt, dass man mit der “Nuss” einer Knarre hineinkommt. Fotos werde ich noch einstellen.
I had a need for mounting my ev charger to the wall with the additional function for cable management. So I created this quick model. It contains a base to attach to the wall and a lid that can be screwed on the base (sorry didn't have…
I remixed the cable hook from Sulya for the wallmount for the Juice Charge me Type 2 plug. It should be printed with UV and temperature resistant filament if it was to be mounted outside. I would recommend ABS or ASA. -- Ich habe den…
Eine einfache Halterung für das mitgelieferte Ladegerät des Audi A3 40 Etron. A simple holder for the charger supplied with the Audi A3 40 Etron. --- Ecoprintingsolution is now allow to sell the design. If you also want to sell the design…
Eine zweckmässige Aufbewahrung für Kabel und Stecker der heimischen Wallbox. Da meine Wallbox ohne beides kam, hier eine günstige Lösung. Let the sun shine!
Cable hook for the Type 2 plug holder of the Wallbox Pulsar EV charger The hook part rests on top of the plug holder do distribute the weight of the cable Goes under the plug holder, obviously Should be printed with something more temp…
Wandhalterung für das Ladegerät von Audi
Gedruckt mit Ender 3S1 40mm/s, 10% infill
Da ich meine Wallbox etwas versteckt anbauen musste, habe ich nach einer Lösung gesucht das Kabel und den Stecker etwas besser zugänglich zu lagern. Dabei hat mir das Original Model schon sehr gut gefallen allerdings benötigte ich ein…
The ABB terra ac wallbox has a very bright display that cannot currently be dimmed or switched off (?). To keep prying eyes away at night and not disturb any insects, I have designed a cover for it. I already realize that PLA is not the…
This provides a generous hook for a 5m or 7m tethered cable and allows the cable to pass through the back of the hook to stow the cable neater. For reference, the cable diameter is 13mm. Larger cables may be supported by scaling the model…
This is a lid for the male plug / wallbox-part of a type2 charging cable
Mit dieser Halterung ist der Typ 2/Schuko Ladeaadpater aufgeräumt nd gleichzeitig wird Last von der Steckdose genommen, das ist vor allem dann wichtig, wenn ein Zwischenstecker zur Verbrauchsmessung zum Einsatz kommt. Ich habe das Teil…
Cover for Wallbox Pulsar Plus, which helps protect the wallbox from moisture with an integrated cable holder. You will likely need to adjust the mounting holes to match the holes in your wall/mounting object. Print out at least in PETG if…
materiál: ASA / ABS výplň: Gyroid 40%
This is a "cover" or plug for the big M32 holes in the Tesla Wallbox. Inside is a 17,5mm hole for the cable. If you need a bigger or smaller hole (or no hole), just edit this with your favorite 3D Cad tool. I used Tinkercad and printed…
One of the biggest issues on my Babboe City-E is that i don‘t know where to put the heavy battery during charging. This wall mounted case should help you charge your City-E Battery nice and easy. If you want to fix the charger in the…
A friend of mine asked to print the model from carverandi to reduce the light the wallbox creates. After printing and attaching it, there was too much space between print and wallbox. So I fiddled a bit around and decreased the height.…
Print in PETG or similar standing up 17.5mm inside diameter 150mm length 1.2mm wall thickness
Many wallboxes are designed for the cable being looped around the box. Often, the final loop will just flap around, especially when it's windy. I made a clamp that will hold the final loop close together with the rest of the cable. The…
The ceiling of our garage is a kind of lower hanging insulation and very thin and brittle. Nevertheless, I wanted to have a cable rolling mechanism hanging from the ceiling, so that plugging & unplugging of our electric vehicle (EV) is…
This is a case for mounting Cineco's electric scooter charger on a wall. The spikes on the backside are for mounting on insulated walls.
Ein 3-fach Halter für Wallbox Adapter Kabel oder ähnliches. Passend für Kabeldurchmesser 10mm-13mm. Einfach zu drucken, ohne Unterstützung, ohne zusätzliche Haftung. Zusammenstecken, fertig! A 3-way holder for wallbox adapter cables or…
Verlegung des Kabels über die Decke
This is a wall base for my EV charger, the Wallbox Commander 2. I have print it using PLA, was expecting it to break soon, but it's still standing after 6 months! I have also wired a 3 phase plug to the charger's input, so it is now…
Ich habe das Ladekabel von der Wallbox für unser e-Fahrzeug an einem Hörmann Garagentor verlegt, damit es von der Decke hängt. Die Clips sind mit Haken zum einhängen ausgelegt, so dass ich das Ladekabel schnell entfernen kann, falls ich…
Wanddeckel für Elektrik oder Sichtblende für Wartungsschächte in drei verschiedenen Größen. --------------------------------------------------------------------------------------------------------- Lid for wallboxes or screen for…
Some specific blind-plugs to cover all three cable outlets of the baseplate. An addtional contains a center hole for H07RN-F 3G2.5 cables (12.5mm). You may have to to adjust the model to cover your needs. The blind-plugs are designed as…
Voitas Wallboxhalterung aus Aluprofilen Die standartmäßige Kunststoffhalterung gibt ziemlich schnell nach und habe somit eine neue Halterung mit Aluminiumprofilen hergestellt. Die Aluminiumprofile habe ich bei…
Kartenanhänger für den Chip von ABB Wallboxen
Nothing special. I printed with 3 walls and 20% infill, holds strong.
I printed this with ABS, 0.6mm nozzle, 0.35mm layers. The lid has been glued with ABS-Acetone slurry to the base. It's fixed to the wall with 2 3.5mm screws.
Sportellino di protezione per Wallbox Dé 🔌⚡ link wallbox: https://amzn.to/40q0eFp Ho creato questo piccolo sportellino di protezione da applicare sopra alla Dé Wallbox 7.4kW Tipo 2 6‑32A Monofase . L’idea nasce dal fatto che, quando la…
EN: Wall box for RPi with power supply and display holder The box has a preparation made inside for threaded inserts, into which any holder is screwed as needed, incl. power supplies. The collar also has a preparation for threaded…
EV Wallbox RFID / NFC Charging Cards & Key Fobs (Car Designs) Stylish and functional RFID/NFC key fobs for EV charger authentication. Features a internal slot designed for embedded NFC tag coins, encapsulated during printing for a…
I printed this with ABS, 0.6mm nozzle, 0.35mm layers. The lid has been glued with ABS-Acetone slurry to the base. It's fixed to the wall with 2 3.5mm screws.
