24 modeli
/////////////////////////////////////// ENGLISH /////////////////////////////////////// Desk clock with ePaper display with discreet lighting and automatic time synchronization over WIFI. You need to print at least the front part and the…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a low profile case for the 2.9" WeAct ePaper displays sold on aliexpress . It features retaining pins to hold the display in the correct position, and a snap-fit mechanism to hold the case together. The cable is routed out the…
WeAct 2.13" Epaper Module Bezel. Two versions available - one with M3 threads for mounting within something, drywall, etc., and one without. Found on aliexpress https://www.aliexpress.com/item/1005004644515880.html Printed in PLA, 0.12…
Wall-mounted case for WeAct 4.2" Epaper Module. Based off this 4.2" stand by napalmz and adjusted for WeAct module in place of Waveshare one. This model should fit WeMos D1 mini (ish?) ESP8266 board fairly tight. Pictured is a generic…
Remixed low profile case for 2.9" WeAct ePaper displays sold on AliExpress, with hole at the bottom, for USB-C port (and not at the back, like the original model). Also slightly thicker than the original model It fits inside the display…
This case specifically designed for RP2040 module from WeAct Studio. This is bit snug fit (extra 0.30 mm length and width applied to original datasheet specifications) and before printing make sure that z-seam is aligned properly. Else…
Software and assembly video here: Case is ideally held together by either melting with a soldering iron or just using glue. Electronics Used (Including Purchase Links) WeAct Studio STM32 Core (STM32F405RGT6):…
Epaper 4.2" Weact Pilot Dashboard weather station I understand my dashboard code and function may not be usable for you. But at least you may need my case parts. All the other parts have been bought from aliexpress and picked cheapest…
Simple Box for WeAct Studio ESP32 C3 Core Board. Board specs: https://github.com/WeActStudio/WeActStudio.ESP32C3CoreBoard
Weather station with three WeAct displays 2.9" Controlled with an ESP32 Additionally a Zigbee repeater Programmed via ESPHome. Unfortunately the code for WeAct display compatibility was not merged. but you can download it yourself.…
I wanted to add a BTT SFSv2 to my Sovol SV08, and needed additional pins to support both the motion and runout sensors than the SV08 mainboard supported. While there are alternative approaches (including wiring the sensor to the toolhead…
This model is optimized for a layer height of 0.2mm.
Protect underneat your board while you work on it ;) See The OnshapeLink , Modify as needed.
A small case for the USB to CAN Gateway WeAct USB2CANFD. Two different versions with zip-tie mount or plain. Fix the board to the case with a drop of hot glue. Supports advised for the cutout roofs.
This is a simple and practical case designed specifically for the WeAct LogicAnalyzerV1. It focuses on ease of use and protection for your electronics projects. Features Sleeve Compatible: The internal clearance is designed to fit the…
To connect the parts, I used brass treated insert nuts M3*3*4. I took the battery from an old Sony Xperia phone. A TP4056 Protected module is used to charge the battery. For printing, I used PLA plastic.
Case for WeAct CH343P Category: Electronics
Desktop enclosure for the Raspberry Pi Zero 2W with a 2.9" e-ink display styled after digital alarm clocks. The e-ink used is a WeAct 2.9" black-white module which is SW compatible with the Waveshare 2.9 BW V2 module, supports 4 level…
A slim desk clock / info panel for the WeAct Studio 2.9" e-paper module (296×128, B/W or B/W/Red), driven by an ESP32-C3 SuperMini . Inspired by Echo Show style wedges, but thinner and simpler: 104 × 34 × 56 mm. ### Features - Display…
Is just a front to transform the Epaper display into a badge. (This counts as fashion right?) I used the "WeAct Studio 2.13" ePaper front bezel template" as a start, thanks for it. It's not perfectly fit yet, I'm missing a working caliper…
This is a simple and practical case designed specifically for the WeAct LogicAnalyzerV1. It focuses on ease of use and protection for your electronics projects. Features Sleeve Compatible: The internal clearance is designed to fit the…
Epaper 4.2" Weact Pilot Dashboard weather station I understand my dashboard code and function may not be usable for you. But at least you may need my case parts. All the other parts have been bought from aliexpress and picked cheapest…
