Wyniki wyszukiwania: xteink

Sortowanie

58 modeli

XTEINK X4 Pro Pogo Pin Charging Stand

Two models are available: One that supports case-less AND my case. The other changes the location of the charge port to be higher, if you're using a case that needs it. Print the stand on its side, hole facing up. No supports needed. For…

Pobrania
785
Polubienia
82
Ocena
5
P
Printablesftoerring

Pokédex Foldable Xteink X4 Case

The moment I saw people 3D printing cases for the Xteink X4, I knew I had to make a Pokédex case! This case can be 3D printed as-is, or in multicolour if you want the full Pokédex look! Since I don't have access to a multicolour printer,…

Pobrania
388
Polubienia
111
Ocena
4,5
P
PrintablesVeiu

Xteink X4 Foldable Case

Foldable case for ereader Xteink X4. Available versions Magnetic closure (D10x2mm) Magnetic closure (D10x2mm) + Magsafe on lid No magnets The hinge is fixed using paper clips, as detailed below

Pobrania
314
Polubienia
67
Ocena
5

XTEINK X4 Pro Case

Use default structural print settings. No need for supports. I provided gifs to show how to install/remove. My Xteink x4 Pro charger stand supports this! Check it out through my profile!

Pobrania
309
Polubienia
26
Ocena
0
P
PrintablesLiam

Xteink X3 Print in Place Case

This is a case for the Xteink X3 with print in place hinges, no assembly necessary

Pobrania
307
Polubienia
18
Ocena
2,33
P
PrintablesNocturnal Omen

Xteink X4 RetroCase 4C Snap on Cover

I love the look of the Xteink X4 Eink reader RetroCase 4c from Makerworld https://makerworld.com/en/models/2657757-xteink-x4-full-body-case#profileId-2939295 This is a simple snap on cover I made for it. I printed mine with PLA

Pobrania
278
Polubienia
17
Ocena
5
P
Printableshonk

XTEINK X3 Charging Dock

XTEINK X3 CHARGING STAND I took the recent arrival of my X3 e-ink reader as a reason to learn some 3D modeling. Inspired by this model from Buckie92 I built a magnetic charging dock for the XTEINK X3. My (completely from the ground…

Pobrania
263
Polubienia
20
Ocena
5
P
Printablesgamberoillecito

Xteink X3 X4 mockup

Just a rough model of the Xteink X3 and X4 eink readers to check their size before buying. I modelled these based on the information on the website and the pictures I found. I don't have the devices so I cannot check how accurate they…

Pobrania
247
Polubienia
19
Ocena
0
P
PrintablesMeki

XTEInk 4X Pro Stand

Back Story I've had some personal issues with having the Pogo pins staying in place when trying to flash my XTEInk X4 Pro, and I wanted something for it on my desk. So, here it is! Have Fun and Enjoy! BOM USB-C Cable of your choice USB-C…

Pobrania
182
Polubienia
15
Ocena
0
P
Printablesjatin

XteInk X4 E-reader TPU Flex case w/ Flat Back & MagSafe Versions

XteInk X4 E-Reader Case - Flat Back & MagSafe Collection A custom-designed protective case for the XteInk X4 e-reader with multiple MagSafe/Qi2 compatibility options. This collection includes a base flat-back model and three…

Pobrania
143
Polubienia
27
Ocena
5
P
PrintablesManuel Grohse

XTEink X4 Pro Charging Stand magsafe

Cables nowadays are way too stiff and the X4 Pro's pogo connector isn't up to the task. This stand uses only components that come in the box and an additional 8x1mm completely optional round magnet. Print with tree supports

Pobrania
136
Polubienia
18
Ocena
5
P
PrintablesMarco Paganini

XTEInk X4 Pro dock for the Sprinkle 3D printed cover

The XTEInk X4 Pro is a great little e-ink reader, but it's also very small and thin, which makes it very fragile. I looked at some commercial alternatives for cases, but was unhappy with them. I then found the Sprinkle XTEInk X4 Pro Case…

Pobrania
128
Polubienia
19
Ocena
0
P
PrintablesAxioPaladin

Simple Xteink X4 Case

I wanted a basic case to protect my Xteink X4 from drops and scrapes, and prevent unintended button presses, but all the ones I found were either overcomplicated or didn't cover all the corners/buttons. I made this simple one and have…

Pobrania
127
Polubienia
15
Ocena
0
P
Printablesfindtherror

Xteink X4 slim sliding cover

A slim case to protect the screen of the Xteink X4 reader. STEP file included, happy remixing

Pobrania
123
Polubienia
20
Ocena
4,67
P
PrintablesMic Kuo

Xteink X4 Case

This is a case for the eink reader Xteink X4. I printed it using TPU. No support needed. Since the lid is printed flat on the bed, it will have some resistance and want to stay opened. After printing, I used a heat gun to heat it up while…

Pobrania
118
Polubienia
19
Ocena
0
P
PrintablesBeepRoute

Xteink X4 clip on case

A clip on case I made that is compatible with the official "book" case Xteink provides for the X4.

Pobrania
112
Polubienia
15
Ocena
0
P
PrintablesnemediArt

xTeink X3 simple case with ClickLight

A simple protective case for your beloved e-reader, featuring a special slot for a MagSafe magnet. If you want read at night, use my ClickLight case! ClickLight! And attach and deatch!

Pobrania
74
Polubienia
15
Ocena
0
P
PrintablesRiese

XTEINK X4 book light

The XTEINK is a really small and neat e-book reader, but it could possibly do with some lighting. Here is an adapter that allows you to easily attach an OSDUE LED Book-light to the XTEINK using the magnetic ring supplied with the XTEINK.…

Pobrania
69
Polubienia
16
Ocena
5
P
PrintablesRobinzx

Xteink X4 Case : flip cover +hinge - XTIENK X4 E-reader

choose and print one flip cover, print case and hinge... All credits to zorian 22 for his great case :)

Pobrania
62
Polubienia
8
Ocena
0
P
PrintablesWynnieTheFloof

XTEINK X3 Screern Cover

I received an XTEINK X3 for my birthday and wanted to carry it around with my keys, but I am scared that the screen may crack easily even with the case, so I whipped this up real quick on OnShape. This attaches to the e-reader over the…

Pobrania
55
Polubienia
12
Ocena
0
P
PrintablesNocturnal Omen

Xteink X4 Vertical Stand

Xteink X4 Retrocase 4c vertical stand. This is a stand if you have the Retrocase 4c and you want to stand up your device.

Pobrania
41
Polubienia
7
Ocena
0
P
PrintablesAtom Arthur

XTEINK Light Cover

A lamp shade for the official Xteink light you can buy off their site. I don't know how to use blender so if you can make it better that'd be dope.

Pobrania
32
Polubienia
3
Ocena
0
P
Printableselenyio

Magsafe-style DUMB wallet (XTEINK compatible)

Simple remix of the DUMB wallet, adding a cutout for magsafe-style magnetic stickers. Made this specifically for the XTEINK X4 and the magnet stickers that come with it, but it could work with many things. Just the 3 card version because…

Pobrania
30
Polubienia
6
Ocena
0
P
PrintablesSPP

QUMOX reading ligth magsafe adapter for the XTEInk X3/X4

This is a small and easy to print magsafe adapter for the QUMOX reading light so it can be attached to the XTEInk X3 or X4. Tested on the X4. This is a great little light because it's dim enough on the lowest setting that doesn't bother.…

Pobrania
29
Polubienia
5
Ocena
0
P
PrintablesBadDad

Xteink X4 Book Light Adapter

Specifically designed with this light in mind: https://www.amazon.com/dp/B0CL68P76W But it's a generic book light so I'm sure this will work with others.

Pobrania
27
Polubienia
7
Ocena
5
P
PrintablesJohn Doe

XTEINK X4 Mockup

This is a mockup of XTEINK X4 small e-book to create your own case.

Pobrania
27
Polubienia
3
Ocena
0
P
PrintablesJula

Xteink X4 Raised Stand

Xteink X4 Stand A stand that holds the Xteink X4 a bit higher up, closer to eye level. It should fit most metal rings, including the Xteink brand ones that come with the device.

Pobrania
23
Polubienia
4
Ocena
0
P
PrintablesNocturnal Omen

Xteink X3 Retrocase Cover

I made a cover for the Xteink X3 retrocase. This is to cover and protect your screen

Pobrania
23
Polubienia
1
Ocena
0
P
Printablesblake•rohde

Yet Another XTEINK X4 Pro Charging Dock

Minimal charging dock for the XTEINK X4 Pro. Verified working with OEM XTEINK Magnetic (Pogo) Charging Adapter and similar 3rd party adapters like: "CANWHIO" Charger Adapter for XTEINK X3/X4 Pro eBook Reader (2 Pack), xtrons Charging…

Pobrania
23
Polubienia
3
Ocena
0
P
Printablesfacelesstech

xteink x4 LED filament reading light

The only thing that was missing from my xteink was a light when reading in the dark as it had no back light. I had some LED filament strip on hand so I designing my light around that. It powered by a recycled lipo from a vape. Full build…

Pobrania
19
Polubienia
6
Ocena
0
P
PrintablesRobinzx

Xteink x4 - original lamp - lamp holder for the flip cover

Print and add in the hole of the lamp holder an adhesive pad to fit the original xteink lamp. To be used with the flip cover without stoppers in my collection

Pobrania
18
Polubienia
2
Ocena
0

Xteink X4 PRO - Flip Cover

Меня не очень устраивала крышка имеющая люфт. Поэтому я сделал собственную модель. Использовал 6 магнитов 5x3

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesNocturnal Omen

Xteink X4 Retrocase 4c Light Adapter (remix)

A nice retrocase 4c led light attachment someone shared online I slightly adapted it to make the Retrocase 4c modular.

Pobrania
15
Polubienia
2
Ocena
0
P
Printableswilliamdecker88

XTEINK X4 + Free2 Page Turner Stand - Right and Left Hand Available

There is a right hand and left hand model available. It will probably work with the X3 and the X4 pro, but I haven't tested with those models.

Pobrania
14
Polubienia
4
Ocena
0
P
Printablesrp86

Xteink X4 Sliding Case w/ Magsafe - Remix

Remix to allow flat mounting and good magnetic adhesion with the following: Magsafe compatible magnet sticker: https://www.amazon.com.au/dp/B0989K3P3M iPhone 16 Pro case - Spigen Rugged Armor MagFit I printed in PETG, 0.2mm layers. I…

Pobrania
13
Polubienia
3
Ocena
0
P
PrintablesWillyfrog

Xteink X4 Displacer plate for iPhone 17 Pro (no Max)

the X4 can't be set on the back of an iPhone 17 Pro since the camera and the magsafe are closer than in the 17 Pro Max with this plate and the two metal rings that come with the X4, you can have it along with the phone, although it will…

Pobrania
13
Polubienia
2
Ocena
0
P
Printablesmikelawrencenz

Xteink X4 Hard Case

Hardcase for the Xteink X4 e-reader 0.2mm Resolution PLA, PETG No supports

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesnemediArt

xTeink X4 simple case with ClickLight

A simple protective case for your beloved e-reader, featuring a special slot for a MagSafe magnet. If you want read at night, use my ClickLight case! ClickLight! And attach and deatch!

Pobrania
13
Polubienia
2
Ocena
0
P
PrintablesnemediArt

xTeink X3 Fairphone 6 case with ClickLight

A simple protective case for your beloved e-reader, featuring a special slot for a MagSafe magnet. And attach to your Fairphone 6! If you want read at night, use my ClickLight case! ClickLight! And attach and deatch!

Pobrania
12
Polubienia
10
Ocena
0
P
Printablesdeigge

Xteink X3 Pogo Pin Model

This is a simple model of the pogo connector from the Xteink X3 which can be used to make cutouts for the charger. I included the blend file.

Pobrania
12
Polubienia
0
Ocena
0
P
Printablessimone cicali

Xteink X4 sliding cover w/ Strap and lanyard

1 - lanyard holes 2 - access to USB port and pushing point 3 - slot for an NFC tag 4 - holes and space for an elastic strap I have made space for adhesive lining. you have to glue the strap in its slot before adding the lining.

Pobrania
11
Polubienia
4
Ocena
0
P
PrintablesEric Westrope

XTeink case light

I found holding the xteink for long periods was just a bit uncomfortable when the light was mounted on the back, so I made a simple case and attached the booklight holder to the back. I added a ring mount inside the case, for those who…

Pobrania
10
Polubienia
3
Ocena
0
P
PrintablesEthric99

XTEink X4 Pro Charging Cradle

A charging cradle for the XTEink X4 Pro. There are 2 files - The Cradle Base - A Cables-stop friction-block (optional) For the friction pin you will likely have to sand it a bit cause I made it 1mm bigger than the slot. Note: This is…

Pobrania
8
Polubienia
1
Ocena
0
P
PrintablesRobinzx

Xteink x4 - case for xteink lamp and lamp holder. all credits to andywings

The right size to store original xteink lamp and my lamp holder for the flip cover,no stoppers,in my collection. To print in two colours pause the print, unload the filamenti, load the new One and resume ( if you do not have a multicolor…

Pobrania
7
Polubienia
4
Ocena
0
P
Printablesiyersmith

Pixel 10 case for Xteink x3

Pixel 10 case with a cutout for an Xteink x3 ereader. This helps to hold the ereader in place and protect it from bumps or falling off. I also improved the buttons by adding cutouts, which makes them easier to press and greatly helps…

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesScout339

XteInk X4 E-reader case with covered MicroSD slot - TPU, flex

Check the original model for more info on Magsafe versions, I just didn't make all the Magsafe variations, only the flatback version.

Pobrania
6
Polubienia
2
Ocena
0
P
Printablessbx

Xteink X4 adapter for the Modular Mounting System

An adapter for the Xteink X4 e-book reader to the Modular Mounting System, so you can read in bed. Use the [Crosspoint BLE firmware]( https://github.com/thedrunkpenguin/crosspoint-reader-ble ) and a Bluetooth page turner.

Pobrania
5
Polubienia
2
Ocena
0
P
Printablesizoony

XTEINK X3 case

XTEINK X3 case Simple slim case with Rubber band I printed mine using clear PETG filament. Of course, you can also use solid-colored filament.

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesPavel Berka

Xteink X4 Travel Case

I printed "Xteink X4 sliding cover w/ Strap and lanyard" https://www.printables.com/model/1742729-xteink-x4-slim-sliding-cover and loved it! There was just one little issue - dust getting into the space between the cover and X4 when I…

Pobrania
4
Polubienia
1
Ocena
0
P
Printablesfuzzyhalo

XTEInk X3/X4 Replacement front button

Slot in replacement button. To replace pull black rubber component out of the body with tweezers, situate the dovetails into the print, and press button back down (poke at black rubber) until both buttons work again.

Pobrania
4
Polubienia
0
Ocena
0
P
Printablesimacmill

Xteink X4 Pro Protective Case with Integrated USB-C Charging

Xteink X4 Pro Protective Case — No More Charging Stand! A flexible TPU protective case that incorporates the original USB-C pogo-pin adapter supplied with the Xteink X4 Pro . Once installed, the adapter remains attached to the e-reader,…

Pobrania
4
Polubienia
0
Ocena
0
P
Printablestoaster

xteink x3 + iPhone 16 case

I've got a few months on it so I'm confident that it's usable. It's pretty much what it looks like. All the x3 buttons are accessible, but you do need to take it out to get the the back pogo pins. The inside-curl overhang is going to have…

Pobrania
3
Polubienia
1
Ocena
0

Xteink X4 Rugged Case with light

Features: Rugged case Reading light USB port is accessible with the case on Printing: Everything should print as the slicer opens the a few notes however: x4-case-top: print this face down on the print bed without supports…

Pobrania
2
Polubienia
1
Ocena
0
P
Printablesrknt

xteink X4 magnetic nametag case

Requires four 8x25x2 magnets.

Pobrania
0
Polubienia
0
Ocena
0
P
Printables

Xteink X3 Print in Place Case

This is a case for the Xteink X3 with print in place hinges, no assembly necessary

P
Printables

XTeink case light

I found holding the xteink for long periods was just a bit uncomfortable when the light was mounted on the back, so I made a simple case and attached the booklight holder to the back. I added a ring mount inside the case, for those who…

P
Printables

Xteink X4 Case : flip cover +hinge - XTIENK X4 E-reader

choose and print one flip cover, print case and hinge... All credits to zorian 22 for his great case :)

P
Printables

Xteink X4 Case : flip cover +hinge - XTIENK X4 E-reader

choose and print one flip cover, print case and hinge... All credits to zorian 22 for his great case :)