Liczymy pasujące modele…
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
A mount i made for my eye tracker 5 to mount on my Samsung G7 monitor. This mount allows you to still operate the joystick/power button. The large center de-boss is to aid with aligning the camera module, and the notch is there to help…
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
i've adapted the G93 version so it would fit the tobii 5 on my Odyssey G9 Neo (AG952N) with 1000R curve. just a simple lengthening of the arms that fit below the screen. it fits tight so it'll stay stuck to the screen without extra…
Cover that ugly shiny part of the frame with this simple black plug. This is for the S1000R 2021 and up Printed with Bambu X1C (default-ish settings): 0.4 nozzle 0.24mm Draft 90% infill
SC77 2017-2020 Honda Fireblade CBR1000RR Mirror Blanking Plates Provided a left and right file. Printed in PLA due to short term usage. If long term consider UV stable filaments like ASA. Setting used. 0.2mm layer height, 10% infill, 4…
This simpel mount allows you to mount the Tobiii eye tracker to a 1000r screen.
einfaches Schlüsselbrett mit 4 Haken
Chainguard Honda CBR1000RR '04/'07, was mandatory for racing, printed in PETG, lasted even after crashing with it. Printed at 100% infill, 0.2 layer height.
You have a S1000R (2021 and up), looks amazing! You are bored of your current wind guard (or you don't have any yet), but you don't want to pay ungodly amount for a small piece of plastic? Look no further. With this tiny little thing…
L300 CarPlay unit made for Honda cb1000r printed in PETG The model use the OE screws and rubbermounts The model i made to make a slick mount that look almost OE and is as minimal as possible 4x 5mm nuts 4x 5x30mm bolts the carplay unit i…
Gabarit guidon BMW S1000rr Permet de contrôler l'alignement des demis-guidons Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Doesn't Matter Resolution: 0.25 Filament: Prusament Petg / PLA Category: Automotive
Smooth surface allows for customization or sleek look that blends with the rest of the bike. Printed with Black PLA on smooth build plate to allow print to print flat with smooth surfaces and no supports required. Install with M6…
Mine was worn down to almost nothing, so I made new one, slightly redesigned for 3D printing. Would recomend prining with 999 walls for better abrasion profile. Part number AP8158669.
You'll need two (2) pieces.
I made this model, first in years and my first design in Tinkercad. It allows the mounting of Coast CF1000R 1000L LED Rechargeable Flashlights that are currently sold in 3pks at costco. Design allows for the use of screws or zip ties.
A replacement for the factory fork covers for the Kawasaki GPZ1000RX (Ninja 1000R or ZX1000a) These thread onto the schrader valve cap threads (pictured last), unlike the originals which are just snap fits into the top of the fork tubes.…
Kawasaki part 920751762 is no longer produced. This is a near perfect replica of it and should be printed in a flexible material: Nylon, TPU, Ninjaflex, etc. The factory part has two cylindrical recessions on the bottom, most likely for…
Hey, as there was no model available and I didn't want to buy the original race covers, I decided to design some myself. These are mirror hole covers for an S1000RR K67. You can reuse the nuts from the original mirrors but will need some…
Introduction I love the incredible SideKick filament loader that @MrFlippant designed. However despite my best efforts to source the specific DC 12V 1000RPM geared motor listed in his build guide for the direct drive I wasn't able to.…
Did this part for a friend, now sharing it with you all. Model at photos is printed with Creality Hi, PETG.
motorcycle keychain ( designed for bmw m1000rr)
BMW S1000RR Hepco & Becker sportrack mounting clip (2019 - 2022) Unfortunately the sportsrack mounting requires the bracket to be bolted to the rear subframe which whilst secure is inconvenient. This bracket bolts to the underside of the…
Lets be real, nobody wants to open up the passenger seat to get your disc lock out and BMW did not give any room or a mount option for a disc lock. I got tired of having to take the back pack off or put it on with the helmet on. If its…
This piece provides a hot air flow block from the front radiator up through the E-Brake lever on 2016-2018 Yamaha YXZ1000R cars. This replaces the paper towel I crammed in around the E-Brake handle to stop getting blasted by really hot…
Set of part to make the Newray YXZ 1000R look more like your beloved Z :) The cage comes in 2 flavors, with or without the top panel. There is a set of mirrors that press fit on the bar, but I used some double side tape to keep everything…
HueForge Honda Fireblade/CBR1000rr This was my first HueForge and first upload - it's a photo taken of me riding my Fireblade at Fish Hill. Please feel free to use it for any motorbike fans in your life. The instructions are for BambuLab…
Do you have bar-end mirrors on your S1000R (2021 and up), great look! But now you are stuck with those antenna looking ugly pipe clamp things where the original mirrors used to be. You managed to get rid of the left side because there are…
Just take out the factory one and insert the printed one. The chamber walls are more rigid, the first two have bypass holes. I thought the accuracy improved with this, and the sound was almost unchanged.
Do you have a S1000R (2021 and up)? Great bike! problem is, thieves think the same! so now you have to cary a brake lock or a chain with you to lock your bike. Unfortunately the S1000R doesn't have much space to stow a lock on/in. If…
BMW S1000R fork guards 2014-2020 needs 6 3mm button head screws. I printed in PETG and tri-color PLA. 15% infill and 3 walls on my XL. Open and slide the upper thicker fork side first. Then slowly slide the rest of the fork into the…
As far as I know, this part has been discontinued, you can make it from various materials or use it as a carbon fiber mold.
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Introduction I love the incredible SideKick filament loader that @MrFlippant designed. However despite my best efforts to source the specific DC 12V 1000RPM geared motor listed in his build guide for the direct drive I wasn't able to.…
Print with 10 walls ABS or ASA for better heat resistance and strength. Dont make it with infill as it will be weak. If its ABS you can vapor smooth it or paint it also. Don't do it with PLA is its weak and will bend with heat.
BMW s1000r Ersatzteile LED Lichtabdeckung, Kappe, Umbau, Tuning, Anpassung. BMW-Ersatzteile für Ihr Motorrad. Ersetzen Sie beschädigte Teile oder verleihen Sie Ihrem Motorrad mit diesen Tuning- und Styling-Teilen einen einzigartigen Look.…
