Wyniki wyszukiwania: 1002

Sortowanie

Liczymy pasujące modele…

P
Printablesjackra1n

Raspberry Pi 5 Geekworm X1002 case

I'm not a 3D Model designer but I really want a case for my Pi 5 which also uses Geekworm X1002 HAT with an NVME SSD. So I remixed the case model by @pyrho as I really like it and made it fit the Pi 5 with the bottom NVME HAT. I also…

Pobrania
516
Polubienia
33
Ocena
5
P
PrintablesJohnDoe993

Case for WUZHI ZK-1002T Amp

Simple Case for the Whuzi ZK-1002T 2x100W Amplifier Print Settings Printer: Elegoo Neptune 4 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Filament: Elegoo Rapid PLA+ PLA Grey Category: Music

Pobrania
465
Polubienia
43
Ocena
5
P
Printablesnaturallaw

Case For ZK-1002T amp board

Requirements: 'ZK-1002T' board * 1 M3x10 (or M3x5) Bolt * 4 Assembly: Remove bottom panel on 'ZK-1002T' board (keeping on screws) Use the four screws to put the board into the case. Optional: Multi material prints for 'Front Panel' and…

Pobrania
140
Polubienia
12
Ocena
0
P
PrintablesFrogree

raspberrypi5 + x1002(nvme adapter) + official pi5 cooler + NVME heatsink CASE

raspberrypi5 + x1002(nvme adapter) + official pi5 cooler + NVME heatsink(from aliexpress) x1002 standoffs and flathead screws were not used, you need M2.5 SHCS longer than 10mm Raspi reset button can be pushed on the case. The case…

Pobrania
119
Polubienia
5
Ocena
0
P
PrintablesFrogree

Argon NEO 5 bottom shell for x1002

Argon NEO 5 screws were not used. You need M2.5x8mm SHCS x2ea, M2.5x10mm SHCS x2ea

Pobrania
111
Polubienia
4
Ocena
0
P
PrintablesHollidayLimited

ZK-502 / ZK-1002 Amplifier Flush Mount Plate

Simple no nonsense surface flush mount plate. Will work for ZK-502 and ZK-1002 amps. I have provided a version for both the MT and T versions. ** Please note there are two amp versions! Check which model variant you have to be sure of…

Pobrania
101
Polubienia
11
Ocena
0
P
PrintablesJamie Skella

PlayStation 1 xStation ODE microSD hood cover mount for PS1 SCPH 1000 1001 1002

I save old PlayStation consoles from landfill by replacing the broken optical drives with xStation units and a cover is the final touch. Inspired by another xStation hood that is only available to purchase, I wanted an aesthetically…

Pobrania
99
Polubienia
16
Ocena
0
P
Printablestbrymer

Raspberry PI 5 - Geekworm NVME X1002 - Geek PI Active Cooler

Raspberry PI 5 Case that fits the Geekworm NVME X1002 and the GeekPi Active Cooler.

Pobrania
90
Polubienia
7
Ocena
0
P
PrintablesCowboy3D

Raspberry Pi 5 Geekworm X1002 case with VESA

Snap fit case for pi5 with geekworm x1002 buttom and VESA mount.

Pobrania
89
Polubienia
6
Ocena
0
P
PrintablesIrvin Rampelle

Behringer Mixer Xenyx 1002/802 angled (16°)

My setup consist of a mixer for my synths, a DI box, in-ear monitors and a powerplay P2 inside a case. I wanted my mixer to be lifted on the back to be more practical and to hide powersupply underneath (about 7cm on the back). The holes…

Pobrania
78
Polubienia
14
Ocena
0

1002_Tapa eje X e Y artillery X1

tapa para los aluminios de los ejes x e y de la artillery X1, modificados sobre modelos anteriores y reforzados. tb tobera acturalizada y acercada al bloque 2 mm .

Pobrania
57
Polubienia
7
Ocena
0
P
PrintablesFietspezi

Fosi Audio ZK-1002D Mini Under Desk Mount

I use some bookshelf speaker on my Desktop connected to a Fosi Audio ZK1002D Mini Amp from Amazon. The Fact that the Amp is so tiny, and it's flying around on my desk annoys me, and I designed a simple solution to mount it under my desk.…

Pobrania
50
Polubienia
2
Ocena
0
P
PrintablesHonza

Merkur kit part 1002

compatible parts for metal screw kit merkur M3.5 screws

Pobrania
45
Polubienia
3
Ocena
5
P
PrintablesDirkHoefle

Case for Amplifier ZK-1002T

Backplate uses a special 4mm Connector plate. If there is a need I could change it to a more comon speaker connector

Pobrania
43
Polubienia
4
Ocena
0
P
Printableso3blig

Behringer Mixer Xenyx QX1002 USB - Mod Side

Mod to make Behringer mixer Xenyx QX1002 USB more modern and save space. Print Settings Resolution: 0,2 Extrusion Width: 0,4 Outline Perimeters: 2 Top Layer: 4 Button Layer 4 Infill: 15% - Gyroid Supports: Yes - For Screw Hole Rafts: No…

Pobrania
43
Polubienia
6
Ocena
5
P
PrintablesSimbungu

Grab Handle Spacer compatible with Land Rover Discovery II part EYF100250

I have a 2001 Land Rover Discovery II SE7 that was missing the spacers for the 3rd row seat passengers. The part (# EYF100250) is no longer available from Land Rover, so I made my own in Fusion 360. Print Settings Printer Brand: MakerBot…

Pobrania
43
Polubienia
4
Ocena
0
P
PrintablesKuna

Wuzhi ZK-1002M amplifier mount holder

A simple clip in wall mount for the Wuzhi ZK-1002M amplifier. Printed from ABS+, but PLA and other should work too. Printed without supports, the overhang is minimal.

Pobrania
35
Polubienia
2
Ocena
0
P
Printablesrrauenza

Kohler bidet plate adapter for K-1321002

The Kohler BD-N450US uses an install plate from part assembly K-1321002, but the plastic rectangular inserts can break. I made a custom insert for our toilet that takes up the whole space. I've included the STEP and F360 file so that the…

Pobrania
34
Polubienia
2
Ocena
0
P
Printables3Dva

Behringer Xenyx 1002USB vesa mount

Vesa (10x10) mount/stand for Xenyx USB audio mixer. Modelled in Onshape. Curvature of bottom part made from sketch. Link to onshape model attached. Print instructions Lay flat, print without supports, ~15% infill. I've printed it with…

Pobrania
31
Polubienia
7
Ocena
0
P
PrintablesRonald

Translucent Rocket lamp (21002)

One of my first prints on the Prusa mini+. A green translucent rocketlamp I designed and printed the base and top in petg with white standers in PLA. I used supports on the standers for the hooks to connect to the base. For the top make…

Pobrania
25
Polubienia
5
Ocena
0
P
PrintablesBettapro

ZK-1002T case (+ cooling fan)

This designe is based on ZK-1002T a single board audio amplifier. I needed a small box to protect the electric compoenets from most of the "dangerus" stuff (expecially liquids). As I'm planning to use it on the highest range of it…

Pobrania
21
Polubienia
0
Ocena
0
P

ZK-1002T Sled

Allows you to glue the sled instead of the amp to the case. I used JB Weld, but only because that's what I had on hand. Material: PETG or above recommended if this will see the outdoors at all. Manually painted supports.

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesChoumarin

Vertical / portrait stand for reTerminal E1002

The reTerminal E1002 only comes with a landscape / horizontal stand. This is a portrait/vertical stand for it. 2 versions, 10deg and 20deg Needs a short M3 screw

Pobrania
21
Polubienia
1
Ocena
0
P
PrintablesGreg Nutt

Averatec Mouse Battery Cover Model TGM-6000R D1002UHCE-1

I'm curious to how many are actually using this, so if you use it, please like it! Our battery cover broke for our Averatec All In One 22" a long time ago and I've been fighting with keeping the batteries sitting properly in it ever…

Pobrania
19
Polubienia
1
Ocena
0
P
PrintablesPintie

Nupro 300 winkeladapter Lautsprecherstativ BS-1002 Nubert

Ich habe das Lautsprecherstativ BS-1002 von Nubert gehabt aber das ist nur für Nuveros geeignet. Außerdem war es etwas zu hoch. Der Adapter ermöglicht es Nupro Aktivlautsprecher mit einem Winkel zu montieren.

Pobrania
14
Polubienia
0
Ocena
0
P
Printablesthis_simas

Deltaco PB-C1002 Powerbank enclosure

Backstory I recently had a problem with my Deltaco PB-C1002 powerbank - after about two years of usage, the ports pressed into the powerbank due to broken off stud screw plastic that was holding the PCB onto the base, so it has become…

Pobrania
12
Polubienia
0
Ocena
0
P
Printablesphodgson

thermapen TX-1002X-NP probe holster

Is it a bull? Or a mouse? A mousebull? A holster/sheath/scabbard/holder for a Thermapen TX-1002X-NP Pro-Series Waterproof Needle Probe. Fusion360 design file included - feel free to remix!

Pobrania
3
Polubienia
0
Ocena
0

1-Ethoxy-2-(2-methoxyethoxy)ethane 3D Molecular Model — CAS 1002-67-1

1-Ethoxy-2-(2-methoxyethoxy)ethane (C7H16O3, CAS 1002-67-1) — a free educational 3D molecular model for teachers and students, by MolGod.org. Symbols are engraved into every atom, so students read atoms by symbol, not by colour. Lay…

Pobrania
2
Polubienia
2
Ocena
0
P
PrintablesNowed guy

Wuzhi ZK-1002M amplifier enclosure

Wuzhi ZK-1002M enclosure 0,12-0,16mm recommended With all ports available Hole for button,potenciometer and screws for speakers I recommend screws M3 Supports = For the body yes

Pobrania
0
Polubienia
0
Ocena
0
P
Printableswerti

Siemens B 1002 Multimeter Power Slider

Plastic part only. The part is supposed to carry the movement to the switch on the inside of the multimeters housing.

Pobrania
0
Polubienia
0
Ocena
0

3-Hexyn-1-ol 3D Molecular Model — CAS 1002-28-4

3-Hexyn-1-ol (C6H10O, CAS 1002-28-4) — a free educational 3D molecular model for teachers and students, by MolGod.org. Each atom is labelled with its own engraved element symbol: no colour chart needed. 3-Hexyn-1-ol has no rings at all:…

Pobrania
0
Polubienia
1
Ocena
0
P
Printables

Vertical / portrait stand for reTerminal E1002

The reTerminal E1002 only comes with a landscape / horizontal stand. This is a portrait/vertical stand for it. 2 versions, 10deg and 20deg Needs a short M3 screw

P
Printables

thermapen TX-1002X-NP probe holster

Is it a bull? Or a mouse? A mousebull? A holster/sheath/scabbard/holder for a Thermapen TX-1002X-NP Pro-Series Waterproof Needle Probe. Fusion360 design file included - feel free to remix!

P
Printables

ZK-502 / ZK-1002 Amplifier Flush Mount Plate

Simple no nonsense surface flush mount plate. Will work for ZK-502 and ZK-1002 amps. I have provided a version for both the MT and T versions. ** Please note there are two amp versions! Check which model variant you have to be sure of…